| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual 1 | Users Manual | 1.61 MiB | October 10 2003 | |||
| 1 |
|
Users Manual 2 | Users Manual | 1.14 MiB | October 10 2003 | |||
| 1 | Attestation Statements | October 10 2003 | ||||||
| 1 | RF Exposure Info | October 10 2003 | ||||||
| 1 | External Photos | October 10 2003 | ||||||
| 1 | ID Label/Location Info | October 10 2003 | ||||||
| 1 | Internal Photos | October 10 2003 | ||||||
| 1 | RF Exposure Info | October 10 2003 | ||||||
| 1 | RF Exposure Info | October 10 2003 | ||||||
| 1 | RF Exposure Info | / October 10 2003 | ||||||
| 1 | RF Exposure Info | October 10 2003 | ||||||
| 1 | Test Report | October 10 2003 | ||||||
| 1 | Test Setup Photos | October 10 2003 |
| 1 | Users Manual 1 | Users Manual | 1.61 MiB | October 10 2003 |
* Some of the contents of this manual may differ from your phone, depending upon the software installed or your service provider. TRI BAND GPRS TELEPHONE SGH-P500 1st version
(2003. 06. 2) World Wide Web http://www.samsungmobile.com Printed in Korea Code No.: GH68-xxxxxA English. 06/2003. Rev. 1.0 Contents Important Safety Precautions................................ 7 Unpacking.............................................................. 9 Your Phone .......................................................... 10 Phone Layout .......................................................... 10 Display................................................................... 13 Service Light........................................................... 16 Camera .................................................................. 16 Getting Started .................................................... 17 Installing the SIM Card............................................. 17 Charging the Battery................................................ 19 Switching the Phone On or Off................................... 21 Call Functions ...................................................... 22 Making a Call .......................................................... 22 Adjusting the Volume ............................................... 24 Answering a Call...................................................... 25 Viewing Missed Calls ................................................ 26 Quickly Switching to Silent Mode................................ 28 Selecting Functions and Options .......................... 29 Phonebook........................................................... 31 Storing a Number with a Name.................................. 31 Using Phonebook Entry Options ................................. 34 Searching for a Number in Phonebook ........................ 35 Editing a Caller Group .............................................. 37 Speed-dialling ......................................................... 38 Deleting All of the Phonebook Entries ......................... 40 Checking the Memory Status ..................................... 41 Entering Text ....................................................... 42 Changing the Text Input Mode................................... 43 Using the T9 Mode ................................................... 44 Using the Alphabet Mode .......................................... 46 Using the Number Mode ........................................... 47 Using the Symbol Mode ............................................ 48 2 3 Contents Contents Options During a Call ........................................... 49 Putting a Call on Hold............................................... 49 Using the Menu Functions ......................................... 50 Switching the Microphone Off (Mute).......................... 51 Muting/Sending Key Tones........................................ 52 Sending DTMF Tones................................................ 52 Searching for a Number in Phonebook ........................ 53 Answering a Second Call........................................... 54 Making a Multi-party Call .......................................... 54 Using the Menus .................................................. 57 Accessing a Menu Function by Scrolling ...................... 57 Accessing a Menu Function by Using Its Shortcut ......... 58 List of Menu Functions.............................................. 58
(Menu 1.2)
(Menu 1.1)
(Menu 1.3)
(Menu 1.4) Text Messages ..................................................... 64
..................................................... 64 Inbox
................................................... 66 Outbox Write New
............................................... 67
............................................... 70 Templates
.................................................. 70 Settings
................................................ 72 Delete All
........................................ 72 Memory Status
............................................... 73 Voice Mail
................................................ 74 Broadcast
(Menu 1.8)
(Menu 1.9)
(Menu 1.5)
(Menu 1.6)
(Menu 1.7)
(Menu 2.2)
(Menu 2.1)
(Menu 2.3) Picture Messages ................................................. 76
..................................................... 76 Inbox Outbox
................................................... 79
...................................................... 80 Draft 80 Write New 84 Templates
................................................ 85 Delete All
........................................ 85 Memory Status
(Menu 2.7)
..................................................... 86 Setup
(Menu 2.8) MMS Profile 87
(Menu 2.4) .....................................................
(Menu 2.5) .....................................................
(Menu 2.6)
(Menu 2.9) ...................................................
(Menu 3.1)................................................... Call Records......................................................... 88 Missed Calls 88 Received Calls
......................................... 89
............................................ 89 Dialled Calls
................................................ 90 Delete All
................................................ 90 Call Time
................................................. 91 Call Cost
(Menu 3.4)
(Menu 3.5)
(Menu 3.6)
(Menu 3.2)
(Menu 3.3) Camera ................................................................ 92 Take Photos
............................................ 92
............................................... 95 My Photos Video
...................................................... 96
(Menu 4.1)
(Menu 4.2)
(Menu 4.3)
(Menu 5.3)
(Menu 5.2)
(Menu 5.1) Sound Settings .................................................... 98
............................................... 98 Ring Tone Ring Volume
............................................ 98
............................................... 99 Alert Type 99 Keypad Tone
........................................ 100 Message Tone 101 Folder Tone 101 Power On/Off
........................................... 101 Extra Tones
(Menu 5.4) .................................................
(Menu 5.5)
(Menu 5.6) .................................................
(Menu 5.7)...............................................
(Menu 5.8)
(Menu 6.1) .........................................
(Menu 6.2) Phone Settings .................................................. 103 Infrared Activate 103
..................................... 104 Display Settings Greeting Message
................................... 107 107 Own Number
.............................................. 108 Language 108 Security
........................................ 111 Extra Settings 112 Reset Settings
(Menu 6.7)
(Menu 6.9) .............................................
(Menu 6.6).......................................................
(Menu 6.4) ...............................................
(Menu 6.3)
(Menu 6.5)
(Menu 7.2)
(Menu 7.1) Organiser........................................................... 113
................................................... 113 Alarm
............................................... 115 Calendar Time & Date
.......................................... 117
............................................. 118 Calculator 119 To Do List 122 Voice Memo
................................. 124 Currency Exchange
(Menu 7.4)
(Menu 7.5) ....................................................
(Menu 7.6).................................................
(Menu 7.3)
(Menu 7.7)
(Menu 8.1) Network Services............................................... 125 Call Diverting
......................................... 125 127 Call Barring
(Menu 8.2) ................................................. 129 Call Waiting
(Menu 8.3) ................................................. 130 Network Selection
(Menu 8.4) ....................................... Caller ID 131
(Menu 8.5) ...................................................... 131 Closed User Group (CUG)
(Menu 8.6)............................ ...................................... 133 Band Selection
(Menu 8.7) 4 5 Contents
(Menu 9.1)............................................... Funbox .............................................................. 134 WAP Browser 134
.................................................. 141 Games Sounds
................................................. 144 144 Images 145 Delete All 145 Memory Status
(Menu 9.2)
(Menu 9.3)
(Menu 9.4) ........................................................
(Menu 9.5).....................................................
(Menu 9.6) ............................................ Solving Problems ............................................... 146 Access Codes ..................................................... 149 Phone Password .................................................... 149 PIN ...................................................................... 150 PUK ..................................................................... 150 PIN2 .................................................................... 151 PUK2 ................................................................... 151 Barring Password................................................... 152 Health and Safety Information .......................... 153 Exposure to Radio-Frequency Energy
(SAR Information)................................................. 156 Precautions When Using Batteries............................ 157 Road Safety.......................................................... 159 Operating Environment........................................... 161 Electronic Devices.................................................. 161 Potentially Explosive Environments.......................... 163 Emergency Calls.................................................... 164 Other Important Safety Information......................... 165 Care and Maintenance............................................ 166 Glossary............................................................ 168 Index................................................................. 173 Quick Reference Card........................................ 181 6 Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch your phone off near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). 7 Important Safety Precautions Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Emergency Call Ensure the phone is switched on and in service. Key in the emergency number for your present location, then press the key. You must deactivate any unnecessary features before you can make an emergency call. Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so. Water Resistance Your phone is not water-resistant. Keep it dry. Accessories and Batteries Use only Samsung-approved accessories and batteries. Use of any unauthorised accessories could damage your phone and may be dangerous. Qualified Service Only qualified service personnel may repair your phone. For more detailed safety information, see Health and Safety Information on page 153. Unpacking Your package contains the following items:
Handset Travel Adapter Batteries Ear-microphone Users Manuals Software CD-ROM Data Cable Finger Strap In addition, you can obtain the following accessories for your phone from your local Samsung dealer:
Standard/slim batteries Simple hands-free kit Battery Charger Cigarette lighter adapter Travel charger/adapter Ear-microphone 8 9 Your Phone Phone Layout The following illustrations show the main elements of your phone:
Folder Camera key Ear-microphone jack Soft key (left) Volume/menu browse keys Dial/menu confirmation key IrDA port Special function keys Earpiece Display Navigation keys WAP browser key Soft key (right) Power on/off /
menu exit key Alphanumeric keys Cancel/
correction key Microphone Camera module Antenna Service light 10 Your Phone Key(s) Description In Menu Mode, scroll through the menu options and the Phonebook memory. In Idle Mode, the quickly access the ??? menu and the key allows you to key to access the ??? menu. In Menu Mode, return to the previous menu level and select the current menu respectively. When entering text, move the cursor to the left and right respectively. In Idle Mode, the key allows you to quickly access the Write New menu and the Tone menu. key to access the Ring Perform the functions indicated by the text above them, on the bottom line of the display. In Idle Mode, quickly accesses the Camera menu to allow you to use the camera application. Turns the camera on when held down. In the Capture mode, works as a camera shutter. In Idle Mode, directly launches the WAP
(Wireless Application Protocol) browser. Deletes characters from the display. In Menu Mode, returns to the previous menu level. 11
(soft keys) Your Phone Your Phone Key(s) Description (continued) Display Makes or answers a call. In Idle Mode, recalls the last number dialled or received when held down. In Menu Mode, selects a menu function or stores information that you have entered, such as a name in the phone or SIM memory. Ends a call. Also switches the phone on and off when held down. In Menu Mode, cancels your input and returns to Idle Mode. In Idle Mode, quickly accesses your voice mail when held down. Enter numbers, letters and some special characters. Enter special characters. Perform various functions.
(on the left side of the phone) During a call, adjust the earpiece volume. In Idle Mode, adjust the keypad tone volume. In Menu Mode, scroll through the menu options and the Phonebook memory. Display Layout The display has three areas:
Icons Text and graphic area Menu Name Soft key indicators Area Description First line Displays various icons. See page 14. Middle lines Display messages, instructions and any information that you enter, such as the number to be dialled. Last line Shows the functions currently assigned to the two soft keys. 12 13 Your Phone Backlight A backlight illuminates the display and the keypad. When you press any key or open the folder, the backlight turns on and remains on for a given period of time, depending on the Back Light menu. The display turns off after one minute to conserve your battery power. To specify the length of time the backlight is active, set the Back Light menu (Menu 6.2.4). See page 105 for further details. You can also set the phone to use the backlight only during a specified period of time, in the Auto Light menu (Menu 6.2.5). See page 106 for further details. External Display Your phone has an external display on the folder. It indicates when you have an incoming call or a message. It also alerts you at the specified time when you have set an alarm by turning on its backlight and showing the corresponding icon on it. When you close the phone, the display turns on and then off after some time specified at the factory. To turn the display on, press and hold one of the Volume keys on the left side of the phone. Your Phone Icons Icon Description Shows the received signal strength. The greater the number of bars, the stronger the signal. Appears when a call is in progress. Appears when you are connected to the GPRS network. Appears when you are out of your home area and have logged onto a different network; for example, when travelling in other countries. Appears when a new text message has been received. Appears when a new voice mail message has been received. Appears when you set an alarm to ring at a specified time. Appears when Silent Mode is active or when you set the Alert Type menu (Menu 5.3) so that the phone vibrates when you receive a call. For further details, see page 28 and page 99 respectively. Appears when the IrDA port is active. For details, see page 103. Appears when the mute mode is active. Shows the level of your battery. The more bars you see, the more power you have left. 14 15 Your Phone Service Light The service light is on the folder. It flashes when services are available on the phone. To activate or deactivate the service light, set the Service Light menu (Menu 6.2.6). See page 106 for further details. Service light Camera The camera module on the top left of your phone allows you to take a picture while on the move. For further details about the Camera feature, see page 92. Getting Started Installing the SIM Card When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details, such as your PIN, any optional services available and so on. Important! The plug-in SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SIM cards out of the reach of small children. 1. If necessary, switch off the phone by holding key until the power-off image down the displays. 2. Remove the battery. To do so:
Press the catch above the battery and hold it in that position. Slide the battery and lift it away, as shown. 16 17 Getting Started Getting Started 3. Slide the SIM card into the SIM card socket, as shown, so that it locks the card into position. Make sure the gold contacts of the card face into the phone. 5. Slide the battery towards the top of the phone until it clicks into place. Make sure that the battery is properly installed before switching the power on. Note: When you need to remove the SIM card, slide it, as shown, and take it out of the socket. 4. Replace the battery, taking care to match the tabs on the battery with the grooves on the phone. Charging the Battery Your phone is powered by a rechargeable Li-ion battery. A travel adapter comes with your phone for charging the battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. The travel adapter allows you to use the phone while the battery is charging, but this causes the phone to charge more slowly. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 1. With the battery in position on the phone, plug the connector of the travel adapter into the jack at the bottom of the phone. 18 19 Getting Started Getting Started 2. Plug the adapter into a standard AC wall outlet. 3. When charging is finished, unplug the adapter from the power outlet and from the phone by pressing the gray tabs on both sides of the connector and pulling the connector out. Note: You must unplug the adapter before removing the battery from the phone during charging;
otherwise, the phone could be damaged. Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, a warning tone sounds and a message repeats at regular intervals on the display. When the battery level becomes too low, the phone automatically turns off. Switching the Phone On or Off 1. Open the folder. 2. Press and hold the key until the phone switches on. 3. If the phone asks you to enter the phone password, enter the password and press the OK soft key. The phone password is preset to 00000000 at the factory. For further details, see page 149. 4. If the phone asks for a PIN, enter the PIN and press the OK soft key. For further details, see page 150. The phone searches for your network and, after finding it, the idle screen appears on the display, as illustrated below. Now, you can make or receive a call. Service Provider 07:30 Wed 06 Mar P o s i t i o n O n l y Menu Name 07:30 Wed/06 Note: The display language is preset to English at the factory. To change the language, use the Language menu (Menu 6.5). For further details, see page 108. 5. When you wish to switch the phone off, press and hold the displays. key until the power-off image 20 21 Call Functions Making a Call When the idle screen displays, enter the area code and phone number, and press the key. Note: When you check the Auto Redial option in the Extra Settings menu (Menu 6.7), the phone automatically redials up to ten times when the person does not answer the call or is already on the phone. See page 111 for further details. Making an International Call 1. Press and hold the 0 key. The + character appears. 2. Enter the country code, area code and phone number and press the key. Correcting the Number To clear Press the the last digit displayed C key. any other digit in the number or key until the cursor is immediately to the right of the digit to be cleared. Press the C key. You can also insert a missing digit simply by pressing the appropriate key. the whole display C key and hold it for more than one second. 22 Call Functions Ending a Call When you want to finish your call, briefly press the key. Redialling the Last Number The phone stores the numbers you dial, receive or miss if the caller is identified. See Call Records on page 88 for further details. To recall any of these numbers:
1. If you have typed characters on the display, press the key to return to Idle Mode. 2. Press the key to display a list of the last numbers in the order in which the calls were made. 3. Use the and keys to scroll through the numbers until the number you want highlights. 4. To Press the dial the number key. edit the number delete the number delete all of the numbers on the Redial list Options soft key and select Edit. Change the number as required, referring to Correcting the Number on page 22 for further details. Options soft key and select Delete. Options soft key and select Delete All. When a confirming message displays, press the Yes soft key. 23 Call Functions Call Functions Making a Call from Phonebook Answering a Call You can store the phone numbers that you use regularly in the SIM card or the phones memory, which are collectively called Phonebook. Simply select a name to recall the associated number. For further details about the Phonebook features, see page 31. Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the Volume keys on the left side of the phone. Press the the key to decrease the level. key to increase the volume level and In Idle Mode, you can also adjust the keypad tone volume using these keys. When somebody calls you, the phone rings and shows the incoming call animation. When the caller can be identified, the callers phone number, or name if stored in your Phonebook, displays. 1. If necessary, open the folder. Press the key or the Accept soft key to answer the incoming call. When the Anykey Answer option in the Extra Settings menu (Menu 6.7) is checked, you can press any key to answer a call except for the key and the Reject soft key. See page 111. When the Active Folder option in the Extra Settings menu (Menu 6.7) is checked, you can answer the call simply by opening the folder. See page 111. Note: To reject the call, press and hold the volume keys before opening the folder, or press the Reject soft key or key. 2. End the call by closing the folder or pressing the key. Note: You can answer a call while using Phonebook or menu features. After ending the call, the display returns to the function screen you were using. 24 25 Call Functions 4. Change the number, as required. 5. To Press the call the number key. store the number Save soft key and enter the name and location required. For further details, see page 31. Deleting a Missed Call 1. Press the Options soft key. 2. If necessary, press the or key to highlight the Delete option. 3. Press the Select soft key. You can press the Missed Call feature. key at any time to exit the Note: You can access the Missed Call feature at any time by selecting the Missed Calls menu
(Menu 3.1). For further details, see page 88. Call Functions Viewing Missed Calls When you are unable to answer a call for any reason, you can find out who is calling you, if this service is available, so that you can call the person back. The number of missed calls displays on the idle screen immediately after a call is missed. To view the missed call immediately:
1. If the phone is closed, open the folder. 2. Press the View soft key. The number for the most recent missed call displays, if available. 3. To scroll through the missed calls call the number displayed Press the or key. key. edit or delete a missed call number Select soft key. See below. Editing a Missed Call Number Note: When the number for the missed call is not available, the Edit option does not display. 1. Press the Options soft key. 2. Press the or key to highlight the Edit option. 3. Press the Select soft key. 26 27 Call Functions Quickly Switching to Silent Mode Silent Mode is convenient when you wish to stop the phone from making noise, in a theatre for example. In Idle Mode, press and hold the Silent Mode message and the Vibration icon (
display. key until the
) In Silent Mode, your phone changes the sound settings as follows:
Option New Setting Alert Type (Menu 5.3) Vibration Keypad Tone (Menu 5.4) Off Message Tone (Menu 5.5) Light Only Folder Tone (Menu 5.6) Power off tone Extra Tones (Menu 5.8) Off Off Off To exit and reactivate the previous sound settings, press and hold the Mode appears. The Vibration icon (
displays. key again until Exit Silent
) no longer Note: When you turn the phone off, Silent Mode is automatically deactivated. Selecting Functions and Options Your phone offers a set of functions that allow you to customise it. These functions are arranged in menus and sub-menus, accessed using the two soft keys marked
. Each menu and sub-menu allows you to view and alter the settings of a particular function. and The roles of the soft keys vary according to the function you are currently using; the label on the bottom line of the display just above each key indicates its current role. Example:
Service Provider 07:30 Wed 06 Mar P o s i t i o n O n l y Menu Name Press the left soft key to access Menu Mode. Press the right soft key to access the Phonebook feature. 28 29 Selecting Functions and Options To view various functions/options available and select the one you want:
1. Press the appropriate soft key. 2. To Press the select the:
function displayed option highlighted Select soft key or the key. view the next function or highlight the next option on a list key or key on the left side of the phone. move back to the previous function or option on a list key or key on the left side of the phone. move back up one level in the structure key, C key. soft key or exit the structure without changing the settings key. In some functions, you may be asked for a password or PIN. Enter the code and press the OK soft key. Note: When you access a list of options, your phone highlights the current option. If, however, there are only two options, such as On/Off or Enable/Disable, your phone highlights the option that is not currently active so that you can select it directly. Phonebook You can store phone numbers and their corresponding names in the memory of your SIM card and phones memories. They are physically separate but are used as a single entity, called Phonebook. Storing a Number with a Name There are two ways to store a number:
Using the Save soft key in Idle Mode Using the New Entry option in the Phonebook menu Storing a Number in Idle Mode As soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in Phonebook. 1. Enter the number you want to store. Note: If you make a mistake while entering a number, correct it using the C key. For further details, see page 22. 2. When you are sure that it is correct, press the Save soft key. 3. Select an icon to identify the category of the number to be stored. Three categories are available:
: Mobile phone number
: Office number
: Home number To select the category, press the press the Select soft key. or key and 30 31 Phonebook Phonebook 4. Select a memory location, either SIM or Phone, by pressing the Select soft key. or key and press the Note: When you change phones, any numbers stored in your SIM card memory are automatically available with the new phone, whereas any numbers stored in the phones memory must be reentered. 5. Enter a name and press the OK soft key. The maximum length of a name depends on your SIM card. For further details about how to enter characters, see page 42. 6. If you do not want to save the number and name in the suggested location, press the C key to clear the location number and enter another location by pressing the number keys. 7. Press the OK soft key to store the name and number. After storing, the phone displays the Phonebook entry or name you just created. 8. To Press the use the entry options Options soft key. For further details, see page 34. key. return to the idle screen Storing a Number Using the Phonebook Menu 1. When the idle screen displays, press the Name soft key. 2. Scroll to New Entry by pressing the or key and press the Select soft key. 3. Select an icon to identify the category of the number to be stored by pressing the or and press the Select soft key. key, Note: The E-mail icon (
) is available in this step. It allows you to save an e-mail address instead of a phone number. 4. Select a memory location, either SIM or Phone, by pressing the Select soft key or key and press the 5. Enter a name and press the OK soft key. The maximum length of a name depends on your SIM card. For further details about how to enter characters, see page 42. 6. Enter the number or address you want to store and press the Save soft key. 7. Continue the procedure from Step 6 on page 32 to store the number. 32 33 Phonebook Phonebook Using Phonebook Entry Options While accessing any Phonebook entry, press the Options soft key to access the options for the entry. To Press the select the highlighted option Select soft key or the key. highlight a different option or key until the option you want highlights. The following options are available:
Paste: allows you to paste the number into the normal dialling mode. Use this option to dial a number similar to one in Phonebook, such as a different extension in the same office. Use the C key to change the number as required;
see page 22 for further details. When you are ready to dial, press the key. Edit: allows you to edit the name and number. Select One Entry to change one number for the selected name. If you change the name, the number is saved separately. Select All Entry to change the name of the entry. Delete: allows you to delete the name and number from Phonebook. You are asked to confirm that you wish to delete the name and number by pressing the Yes soft key. Copy: allows you to copy the number to another location. Use this option to store a number similar to one already in the memory; once copied, edit the number and store it in Phonebook. Caller Group: allows you to organise your Phonebook entries in caller groups so that the phone alerts you in a specific way when a person from one of your groups calls you. Select one of the ten groups available. To remove an entry from a group, select the No Group option. For further details about how to change caller group properties, see page 37. Add Entry: allows you to add a new number to the currently selected name. Searching for a Number in Phonebook After storing numbers in Phonebook, you can search for them in two ways; by name and by caller group. Searching for a Number by Name 1. When the idle screen displays, press the Name soft key. 2. Press the Select soft key when Search highlights. You are asked to enter a name. 3. Enter the first few letters of the name that you want to find. The Phonebook entries are listed, starting with the first entry matching your input. 34 35 Phonebook 4. To view the highlighted entry select a different entry look for a name starting with a different letter Press the View soft key. or key until the entry highlights. key labelled with the letter you want to enter. 5. Once you have found the entry, press the key to dial the number, or press the Options soft key to access the Phonebook entry options; for further details, see page 34. Searching for a Number by Caller Group Phonebook 5. To view the highlighted entry select a different entry Press the View soft key. or key until the entry you want highlights. 6. Once you have found the entry, press the key to dial the number, or press the Options soft key to access the Phonebook entry options; for further details, see page 34. Editing a Caller Group 1. When the idle screen displays, press the Name 1. When the idle screen displays, press the Name soft key. soft key. 2. Scroll to Group Search by pressing the or key and press the Select soft key. You are asked to enter a group name. 3. Enter the first few letters of the group name that you want to find. The caller groups are listed, starting with the first group matching your input. 4. If necessary, scroll to a group by pressing the or key and press the View soft key. The Phonebook entries in the caller group are listed. 2. Scroll to Group Edit by pressing the or key and press the Select soft key. 3. Scroll through the group list by pressing the or key. 4. When the group you want highlights, press the Options soft key. 5. Select each option and change the settings, as required. The following options are available:
Call Ring Tone: allows you to set a ring tone to be used when you receive a voice call from a person in the group. SMS Tone: allows you to set a ring tone to be used when you receive a message from a person in the group. 36 37 Phonebook Phonebook Graphic: allows you to set a graphic icon to be displayed when you receive a voice call from a person in the group. Group Name: allows you to assign a name to the group. For further details about how to enter characters, see page 42. 6. When you finish changing the settings, press the C or key. Speed-dialling Once you have stored phone numbers in Phonebook, you can set up to eight speed-dial entries and then dial them easily whenever you want, simply by pressing the associated number key. Setting Up Speed-dial Entries 1. When the idle screen displays, press the Name soft key. 2. Scroll to Speed Dial by pressing the or key and press the Select soft key. 3. Select the key to which you wish to assign the speed-dialling number, from the 2 to 9 keys, and press the OK soft key. Note: If you have already assigned a number to the key, the Options soft key replaces the OK soft key. Go to Step 6. 4. Select a Phonebook entry from the list and press the View soft key. 5. Select a number, if the entry has more than one, by pressing the Select soft key. or key and press the 6. Once you have assigned a number to the key, you can use the following options by pressing the Options soft key:
Change: allows you to assign a different number to the key. Delete: allows you to clear the setting so that no number is assigned to the key. Delete All: allows you to clear the settings for all keys so that no numbers are assigned to any of the keys. Number: allows you to view the number assigned to the key. 7. When you finish setting the options, press the C or key. Speed-dialling from Phonebook To speed-dial the numbers assigned to keys 2 to 9, press and hold the appropriate key. Note: Memory location 1 is reserved for your Voice Mail server number. 38 39 Phonebook Phonebook Deleting All of the Phonebook Entries Checking the Memory Status You can check how many names and numbers are stored in Phonebook, in both the SIM card and phone memories. You can also see the capacity of both memories. 1. When the idle screen displays, press the Name soft key. 2. Select the Memory Status option by pressing key and press the Select soft key. the or 3. Press the or key to view the number of existing and remaining entries in the SIM card and phone memories. 4. When you finish checking, press the C or key. You can delete all of entries in the selected memory or both memories. 1. When the idle screen displays, press the Name soft key. 2. Scroll to Delete All by pressing the or key and press the Select soft key. 3. To place a check mark by the memory you want to empty, All, SIM or Phone, press the Mark soft key. You can remove the check mark by pressing the Unmark soft key. 4. When you are finished marking, press the Delete soft key to delete the entries in the selected memory. 5. Enter the phone password and press the OK soft key. Note: The password is preset to 00000000 at the factory. To change it, see page 109. 6. When the confirming message appears, press the Yes soft key. To cancel the deletion, press the No soft key. 7. When you finish deleting, press the C or key. 40 41 Entering Text When using your phone, you will often need to enter text, such as when storing a name in Phonebook, creating your personal greeting or scheduling events on your calendar. You can enter alphanumeric characters by using your phones keypad. Your phone has the following text input modes:
T9 mode This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter when you press the 5 key once, J, K or L displays. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional alphabet mode. Alphabet mode This mode allows you to enter letters by pressing the key labelled with the letter you want to enter once, twice, three or four times until it displays. Number mode This mode allows you to enter numbers. Symbol mode This mode allows you to enter various symbols and special characters. Entering Text Changing the Text Input Mode When you are in a field that allows characters to be entered, you will notice the text input mode indicator on the display. Example: Writing a text message Edit Field Options Text input mode indicator To select the Press the right soft key until T9 mode Alphabet mode Number mode Symbol mode displays. See page 44. displays. See page 46. displays. See page 47. the symbol list displays. See page 48. 42 43 Entering Text Using the T9 Mode The T9 predictive text input mode allows you to key in any character using single keystrokes. This text input mode is based on a built-in dictionary. To enter a word in the T9 mode:
1. When you are in the T9 mode, start entering a word by pressing keys 2 to 9. Press each key only once for one letter. Example: To enter HELLO in the T9 mode, press the 4, 3, 5, 5 and 6 keys. The word that you are typing appears on the display. It may change with each key that you press. 2. Enter the whole word before editing or deleting the keystrokes. 3. If the word is correct, start entering the next word. Otherwise, press the 0, key repeatedly to display alternative word choices for the keys that you have pressed. or Example: Both OF and ME use the 6 and 3 keys. The phone displays the most commonly used choice first. 4. Put a space between words by pressing the key. To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you want to add, press the 0 or display the alternative words. key to Entering Text 2. When you press the 0 or key at the last alternative word, the display shows Add on the bottom line. Press the Add soft key. 3. If necessary, clear the word using the C key and enter the word you want to add using the alphabet mode; see page 46. 4. Press the OK soft key. The word is added to the T9 dictionary and becomes the first word for the associated keypress. Note: This feature may not be available for some languages. To enter periods, hyphens or apostrophes, press the 1 key. The T9 mode applies grammar rules to ensure that the correct punctuation is used. Example: The 1 key is used twice to display two punctuation marks:
L E T S E A T . To shift the case in the T9 mode, use the key. There are three cases; Lower case (ab), Initial Capital (Ab) and Capital lock (AB). You can move the cursor by using the and keys. To delete letters, press the C key. Press and hold the C key to clear the display. 44 45 Entering Text Entering Text To insert a space, press the key. To shift the case in the alphabet mode, use the key. There are three cases; Lower case (ab), Initial Capital (Ab) and Capital lock (AB). You can move the cursor by using the and keys. To delete letters, press the C key. Press and hold the C key to clear the display. Using the Number Mode The number mode enables you to enter numbers into a text message. Press the keys corresponding to the digits you want to enter. Using the Alphabet Mode Use the 1 to 0 keys to enter your text. 1. Press the keys labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on 2. Select the other letters in the same way. Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to move to the right automatically, and then select the next letter. Refer to the table below for further details about the characters available:
Key Characters in the Order Displayed Upper Case Lower Case Space 46 47 Entering Text Using the Symbol Mode The symbol mode enables you to insert symbols into a text message. SYMBOL OK Back To Press the select a symbol corresponding number key. display more symbols or key. insert the symbol(s) into your message cancel your input and return to the previous mode OK soft key. Back soft key. 48 Options During a Call Your phone provides a number of control functions that you can use during a call. Putting a Call on Hold You can place the current call on hold whenever you want. You can make another call while you have a call in progress if your network supports this service. When you have an active call and a call on hold, you may switch between the two calls, changing the one on hold to active and placing the other on hold. To place a call on hold, simply press the Hold soft key. You can reactivate the call whenever you want, by pressing the Unhold soft key. To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up in Phonebook. For details about searching for a number in Phonebook, see page 35. 2. Press the key to dial the second call. The first call is automatically put on hold. Or, 1. Put the current call on hold by pressing the Hold soft key. 2. Make the second call in the normal way. 49 Options During a Call Options During a Call To switch between the two calls, simply press the Swap soft key. The current call is placed on hold and the call on hold is reactivated so that you can continue conversing with the other person. When you want to finish, end each call normally by pressing the key. Using the Menu Functions During a call, you can access the main menu functions. 1. Press the Options soft key. 2. Press the OK soft key when the Menu option highlights. 3. Press the menu list. Note: You cannot use some menus during a call. They are deactivated on this list. 4. When the menu you want highlights, press the Select soft key. 5. If the selected menu has sub-options, repeat steps 4 and 5. For further details about the menu functions available, see the list on page 59. Switching the Microphone Off (Mute) You can temporarily switch your phones microphone off so that the other person cannot hear you. Example: You wish to say something to another person in the room but do not want the other person to hear you. To switch the microphone off temporarily:
1. Press the Options soft key. 2. Press the key to highlight the Mute option. 3. Press the OK soft key. The other person can no longer hear you. To switch the microphone back on:
2. If necessary, press the key to highlight the Unmute option. 3. Press the OK soft key. The other person can hear you again. or key to scroll through the 1. Press the Options soft key. 50 51 Options During a Call Options During a Call Searching for a Number in Phonebook You can search for a number in Phonebook during a call. 1. Press the Options soft key. 2. Press the key to highlight the Phonebook option. 3. Press the OK soft key. The Phonebook entries are listed. 4. Enter the name that you wish to find. If you enter the first few letters of the name, the Phonebook entries are listed, starting with the first entry matching your input. 5. To view the highlighted entry, press the View soft key. For further details about the Phonebook feature, see page 31. Muting/Sending Key Tones These options allow you to turn the key tones off or on. If the Mute Keys option is selected, your phone does not transmit the key tones, which allows you to press keys without hearing annoying key tones during a call. Note: To communicate with answering machines or computerised telephone systems, the Send Keys option must be selected. Sending DTMF Tones You can send the DTMF (Dual Tone Multi-
Frequency) tones of the number on the display during a call. This option is helpful for entering a password or account number when you call an automated system, like a banking service. To send the DTMF tones:
1. When you are connected to the teleservice system, press the Options soft key. 2. Press the key to highlight the Send DTMF option. 3. Press the OK soft key. 4. Enter the number you want to send and press the OK soft key. The tones of the displayed number are sent. 52 53 Options During a Call Options During a Call Answering a Second Call You can answer an incoming call while you have a call in progress, if your network supports this service and you have set the Call Waiting menu
(Menu 8.3) to Activate; see page 129. You are notified of an incoming call by a call waiting tone. To answer a call while you have a call in progress:
1. Press the key to answer the incoming call. The first call is automatically put on hold. 2. To switch between the two calls, press the Swap soft key. 3. To end the call on hold, press the Options soft key and select the End Held Call option. To end the current call, press the key. Making a Multi-party Call A multi-party call is a network service that allows up to six people to take part simultaneously in a multi-party or conference call. For more information, contact your service provider. Setting up the Multi-party Call 1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold. 3. To join the first participant to the multi-party call, press the Options soft key and select the Join option. Press the OK soft key. 4. To add a new person to the multi-party call, call the person in the normal way and press the Options soft key. Select the Join option and press the OK soft key. You can add incoming callers by answering the call, pressing the Options soft key, and selecting the Join option. Repeat as required. Having a Private Conversation With One Participant 1. Press the Options soft key and choose the Select One option. Press the OK soft key. The list of call participants appears. 2. Highlight a person from the list by pressing or key, and press the Select soft key the or the key. 3. When the Private option highlights, press the OK soft key. Now you can talk privately with that person. The other participants can still converse with each other. 4. To return to the multi-party call, press the Options soft key and select the Join option. Press the OK soft key. All the multi-party call participants can now hear each other. 54 55 Options During a Call Dropping One Participant 1. Press the Options soft key and choose the Select One option. Press the OK soft key. The list of call participants appears. 2. Highlight a person from the list by pressing or key, and press the Select soft key the or the key. 3. Press the key to select the Remove option and press the OK soft key. The call ends with that participant, but you can continue to talk with the others. 4. When you want to end the multi-party call, close the folder or press the key. Using the Menus The phone offers a range of functions that allow you to tailor it to your needs. These functions are arranged in menus and sub-menus. The menus and sub-menus can be accessed by scrolling with the navigation keys or by using the shortcuts. Accessing a Menu Function by Scrolling 1. In Idle Mode, press the Menu soft key to access Menu Mode. 2. Scroll with the or key to reach a main menu, Phone Settings for example. Press the Select soft key or the key to enter the menu. 3. If the menu contains any sub-menus, Language for example, you can access them by scrolling with the or key and pressing the Select soft key or the key. If the menu that you have selected contains further options, repeat this step. 4. To Press the scroll through the menus or and key, or use the keys on the left side of the phone. confirm the chosen setting Select soft key or the key. return to the previous menu level exit the menu without changing the settings soft key or the key. key. 56 57 Using the Menus Using the Menus Accessing a Menu Function by Using Its Shortcut The menu items, such as menu, sub-menus and options, are numbered and can be accessed quickly by using their shortcut numbers. The shortcut number is shown on the bottom right next to the soft key on the display. Simply press the Menu soft key and enter the number of the menu you want. Note: The numbers assigned to each menu are indicated on the list on page 59. They may not match the menu number on the phone, depending on the services supported by your SIM card. Example: Accessing the Language option. 1. Press the Menu soft key. 2. Press the 6 key for Phone Settings. 3. Press the 5 key for Language. The languages available display. List of Menu Functions The following list shows the menu structure available and indicates the number assigned to each option and the page where you can find a description of each feature. Note: If you use a SIM AT card that provides additional services, the SIM AT menu displays when you press the Menu soft key to enter Menu Mode. For further details, see your SIM card instructions. 1. Text Messages (see page 64) 1.1 Inbox 1.2 Outbox 1.3 Write New 1.4 Templates 1.5 Settings 1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Common Setting 1.6 Delete All 1.7 Memory Status 1.7.1 SIM Memory 1.7.2 PHONE Memory 1.7.3 CB Memory 1.8 Voice Mail 1.8.1 Connect to Voice Server 1.8.2 Voice Server Number 1.9 Broadcast 1.9.1 Read 1.9.2 Receive 1.9.3 Channel List 1.9.4 Language 2. Picture Messages (see page 76) 2.1 Inbox 2.2 Outbox 2.3 Draft 2.4 Write New 2.5 Templates 2.6 Delete All 2.7 Memory Status 2.8 Setup 2.8.1 Delivery Report 2.8.2 Read Reply 2.8.3 Auto Download 2.8.4 Message Acceptance 2.8.5 Hide ID 2.8.6 Expiry Date 2.8.7 Delivery Time 58
* Shows only if supported by your SIM card. 59 Using the Menus Using the Menus 2. Picture Messages (continued) 5. Sound Settings (see page 98) 2.8.8 Priority 2.8.9 Report Allowed 2.8.0 Page Duration 2.9 MMS Profile 3. Call Records (see page 88) 3.1 Missed Calls 3.2 Received Calls 3.3 Dialled Calls 3.4 Delete All 3.5 Call Time 3.5.1 Last Call Time 3.5.2 Total Sent 3.5.3 Total Received 3.5.4 Reset Timers 3.6 Call Cost*
3.6.1 Last Call Cost 3.6.2 Total Cost 3.6.3 Max Cost 3.6.4 Reset Counters 3.6.5 Set Max Cost 3.6.6 Price/Unit 4. Camera (see page 92) 4.1 Take Photos 4.2 My Photos 4.3 Video 4.3.1 Record 4.3.2 Video Clips 5.1 Ring Tone 5.2 Ring Volume 5.3 Alert Type 5.4 Keypad Tone 5.5 Message Tone 5.5.1 SMS Tone 5.5.2 SMS-CB Tone 5.6 Folder Tone 5.7 Power On/Off 5.8 Extra Tones 6. Phone Settings (see page 103) 6.1 Infrared Activate 6.2 Display Settings 6.2.1 Wallpaper 6.2.2 Menu Style 6.2.3 Brightness 6.2.4 Back Light 6.2.5 Auto Light 6.2.6 Service Light 6.2.7 Graphic Logo 6.3 Greeting Message 6.4 Own Number 6.5 Language 6.6 Security 6.6.1 PIN Check 6.6.2 Change PIN 6.6.3 Phone Lock 6.6.4 Change Password 6.6.5 SIM Lock 6.6.6 FDN Mode*
6.6.7 Change PIN2*
6.7 Extra Settings 6.8 Reset Settings
* Shows only if supported by your SIM card.
* Shows only if supported by your SIM card. 60 61 Using the Menus 7. Organiser (see page 113) 7.1 Alarm 7.1.1 Once Alarm 7.1.2 Daily Alarm 7.1.3 Morning Call 7.1.4 Remove Alarm 7.1.5 Autopower 7.2 Calendar 7.3 Time & Date 7.3.1 Set Time 7.3.2 Set Date 7.3.3 World Time 7.3.4 Time Format 7.4 Calculator 7.5 To Do List 7.6 Voice Memo 7.6.1 Record 7.6.2 Memo List 7.6.3 Delete All 7.7 Currency Exchange 8. Network Services (see page 125) 8.1 Call Diverting 8.1.1 Divert Always 8.1.2 Busy 8.1.3 No Reply 8.1.4 Unreachable 8.1.5 Cancel All 8.2 Call Barring 8.2.1 All Outgoing 8.2.2 International 8.2.3 International Except to Home 8.2.4 All Incoming 8.2.5 Incoming While Abroad 8.2.6 Cancel All 8.2.7 Change Barring Password 8.3 Call Waiting 8.4 Network Selection 8.5 Caller ID Using the Menus 8. Network Services (continued) 8.6 Closed User Group 8.6.1 Index List 8.6.2 Outside Access 8.6.3 Default Group 8.6.4 Deactivate*
8.7 Band Selection 9. Funbox (see page 134) 9.1 WAP Browser 9.1.1 Home 9.1.2 Favorite 9.1.3 http://
9.1.4 Settings 9.1.5 Clear Cache 9.1.6 Push Message 9.2 Games 9.3 Sounds 9.4 Images 9.5 Delete All 9.6 Memory Status 9.6.1 Games 9.6.2 Sounds & Images
*Shows only if the Closed User Group Feature is active. 62 63 Text Messages Short Message Service (SMS) allows you to send and receive short text messages to and from other GSM mobile phones. In addition, your phone supports the Enhanced Messaging Service (EMS), which enables you to make messages including simple pictures, melodies, and animation. To use this feature, you must subscribe to the message service of your service provider.
) appears, you have When the Message icon (
received new text messages. If the memory is full, an error message displays and you cannot receive any new messages. Use the Delete option in each message box to delete the obsolete ones. Inbox (Menu 1.1) This message box is used to store the messages that you have received. When you enter this menu, the list of messages in the box displays with the senders phone numbers or names, if available in your Phonebook. 1. Select a message from the list and press the View soft key to read the message contents. 2. To scroll through the contents, press the or key. 3. To scroll to the previous or next message, press the or key. Text Messages While reading a message, you can choose the following options by pressing the Options soft key:
Delete: allows you to delete the message. Send: allows you to resend the message. For further details about how to send a message, see page 67. Text Reply: allows you to reply to the sender by sending a text message. Call Back: allows you to call the sender back. Cut Address: allows you to extract the destination number and URL /e-mail addresses or phone numbers from the message text, so that you can save them in your phones memory. Move to Phone: allows you to move the message from the SIM card to the phone memory. This option is only available when you select a message stored in the SIM card. Move to SIM: allows you to move the message from the phone memory to the SIM card. This option is only available when you select a message stored in the phone memory. Select Objects: allows you to save media objects, such as sounds or images, from the message into your phone. You can use the objects when writing a message. For details, see page 69. 64 65 Text Messages Outbox (Menu 1.2) This message box is used to store the messages that you have already sent or will send. When you enter this menu, the list of messages in the box displays with the recipients phone numbers or names, if available in your Phonebook. Text Messages Select Objects: allows you to save media objects, such as sounds or images, from the message into your phone. You can use the objects when writing a message. For details, see page 69. Write New (Menu 1.3) 1. Select a message from the list and press the View soft key to read the message contents. In this menu, you can write and send a text message. 2. To scroll through the contents, press the or key. 3. To scroll to the previous or next message, press the or key. While reading a message, you can choose the following options by pressing the Options soft key:
Delete: allows you to delete the message. Send: allows you to resend the message. For further details about how to send a message, see page 67. Cut Address: allows you to extract the destination number and URL /e-mail addresses or phone numbers from the message text, so that you can save them in your phones memory. Move to Phone: allows you to move the message from the SIM card to the phone memory. This option is only available when you select a message stored in the SIM card. Move to SIM: allows you to move the message from the phone memory to the SIM card. This option is only available when you select a message stored in the phone memory. Note: When you add media objects to the message, the number of characters you can enter decreases. Creating a Simple Text Message 1. Create your message. Note: For further details about entering characters, see page 42. 2. When you finish entering the message, press the Options soft key. The following options are available:
Send Only: allows you to send the message. The message is deleted after sending. Save and Send: allows you to save a copy of the message and then send the message. You can read the message in your Outbox. Save Only: allows you to save the message so that it can be sent later. You can read the message in your Outbox. For further details about Text Formatting, Add Objects, Add Templates, Add Phonebook, Add Bookmark and Language options, see page 68. 66 67 Text Messages Text Messages Add Objects: allows you to add a sound, melody, picture or animation to the message. Select the category of the object to be added. In each category, you can select the various factory-set items or choose an item received from other sources, such as the Internet or other phones. Add Templates: allows you to apply one of the preset message templates to the text. Select one of five messages stored in the Templates menu (Menu 1.4). For further details, see page 70. Add Phonebook: allows you to add a Phonebook entry to your message. Select one from the list. Add Bookmark: allows you to add a web pages address stored in your Favorite list
(Menu 9.1.2). Select one from the list. Language: allows you to change the language to be used in the T9 input mode. Select the language to be used. 4. Complete the message, and send or save it by following the procedure from step 2 on page 67. 3. Select Send Only or Save and Send, and press the Select soft key. If you want to just save the message, select Save Only. After saving the message, the phone returns to the Text Messages menu. 4. If you select a save option, choose the memory where the message is saved and press the OK soft key. 5. Enter a destination number and press the OK soft key. The message is sent. Note: When the phone fails to send the message, it will ask you if you want to retry. Press the OK soft key to confirm. Otherwise, press the Exit soft key to return to the Edit Field screen. Creating a Message Using the Options 1. Create a message. 2. Press the Options soft key. 3. Select one of the following options by using the and keys and pressing the Select soft key:
Text Formatting: allows you to format the style of the text. For the Size attribute, Normal, Large and Small sizes are available. For the Underline and Strikethrough attributes, select On or Off. These attributes can be combined. 68 69 Text Messages Templates (Menu 1.4) Using this menu, you can preset up to five messages that you use most frequently. Select an empty location or the message template you want and press the Options soft key. The following options are available:
Edit: allows you to write a new message or edit the message. Note: For further details about how to enter characters, see page 42. Send Message: allows you to retrieve the message. Once you have completed the message, you can send, save and send, or simply save it. For further details about how to send a message, see page 67. Delete: allows you to delete the message. You are asked to confirm the deletion by pressing the Yes soft key. Settings (Menu 1.5) In this menu, you can set up default SMS information. A setting group is a collection of settings required to send messages. The number of setting groups available depends on the capacity of your SIM card. Note: The last setting you accessed is automatically activated for sending messages. Text Messages Setting x (where x is the setting group number):
each group has its own sub-menu. Service Centre: allows you to store or change the number of your message centre, which is required when sending messages. You must obtain this number from your service provider. Default Destination: allows you to store the default destination number. The number automatically displays on the Destination screen when you create a message. Default Type: allows you to set the default message type to Text, Fax, Email or Paging. The network can convert the messages into the selected format. Default Validity: allows you to set the length of time your text messages are stored at the message centre while attempts are made to deliver them. Setting Name: allows you to give a name to the setting group currently being defined. Common Setting: The following options are available:
Reply Path: allows the recipient of your message to send you a reply via your message centre, if your network supports this service. To enable or disable this option, press the On or Off soft key. Delivery Reports: allows you to activate or deactivate the report function. When this function is activated, the network informs you whether or not your message has been delivered. To enable or disable this option, press the On or Off soft key. Bearer Selection: allows you to choose either GSM or GPRS, depending on your network. 70 71 Text Messages Text Messages Delete All (Menu 1.6) Voice Mail (Menu 1.8) This menu allows you to delete all of the text messages in each message box. You can also delete all of your messages at one time. To Press the or key. To delete all select a message box to clear of your messages, select All Messages. place a check mark Mark soft key. remove a check mark delete the marked messages Unmark soft key. Delete soft key. When a confirming message displays, press the Yes soft key to confirm. Memory Status (Menu 1.7) This menu shows how many messages are currently stored in the SIM, phone and CB (Cell Broadcast) memories. This menu provides you with a way of accessing your voice mailbox, if your network supports this service. The following options are available:
Connect to Voice Server: before using this feature, you must enter the voice server number obtained from your service provider (see menu option 1.8.2). You can then select a server number from the list and press the OK soft key to listen to your messages. You can quickly connect to the voice server by pressing and holding the 1 key in Idle Mode. Voice Server Number: allows you to change the voice mail server number, if necessary. To Press the enter the server number corresponding numeric keys. correct a digit C key. move the cursor to the left or right without clearing a digit or key. Note: Voice Mail is a network feature. Please contact your service provider for further details. 72 73 Text Messages Language: allows you to select your preferred language to display cell broadcast messages. Please contact your service provider for further details. Text Messages Broadcast (Menu 1.9) This network service allows you to receive text messages on various topics, such as the weather or traffic. Cell Broadcast (CB) messages display as soon as they are received, provided that:
the phone is in Idle Mode. the Receive option is set to Enable. the message channel is currently active on the channel list. The following options are available:
Read: lets you view the received message. The Volatile box displays the messages from the network, but loses its contents as soon as the phone is switched off. Scroll through the message by using the keys. While reading a message, press the Save soft key to store the message in the Archive box for later retrieval. and Receive: allows you to enable or disable the reception of broadcast messages. Channel List: allows you to indicate the channels from which you wish to receive broadcast messages. The following options are available:
Select: use to enable or disable channels on the list by marking or unmarking them respectively. A check mark displays in front of each selected channel. Add Channel: use to enter the ID and title for a new channel. Delete: use to remove a channel from the list. Edit: use to change the ID and title of an existing channel. 74 75 Picture Messages Multimedia Message Service (MMS) is a messaging service very similar to Short Message Service
(SMS). It provides automatic and immediate delivery of personal multimedia messages from phone to phone or from phone to e-mail. In addition to the familiar text content of text messages, multimedia messages can contain images, graphics, voice and audio clips. An MMS message is a multimedia presentation in a single entry. It is not a text file with attachments. Using the MMS feature, your phone can receive multimedia messages. You can also send picture messages, which are short messages that contain images, such as your photos or graphics you downloaded from the Internet. This function is available only if it is supported by your service provider. Only phones that offer picture message features can receive and display picture messages. Inbox (Menu 2.1) Viewing a Message When You Receive it When a new multimedia message comes in, the display shows a text notification along with the senders number. 1. Press the View soft key to view the message. The display shows brief information about the message, such as the senders number, the message size and the subject. If you want to view the message later in the Inbox, press the Exit soft key. Picture Messages 2. To scroll through the message information, press the or key. While viewing the information, press the Options soft key to use the following options:
Retrieve: retrieves the message from the MMS server. Delete: deletes the message. More Information: shows you detailed information about the message. Viewing a Received Message in the Inbox When you access the Inbox menu (Menu 2.1), the list of multimedia messages you received displays with the senders phone numbers, if they are available in your Phonebook, or subjects. The icons on the left tell you the status of the messages.
: Messages you have already read.
: Messages you havent read yet. 1. Select a message on the list and press the Select soft key. The display presents the message and scrolls to the next page, if it has one, after a specified time; for details about setting the time, see page 86. 2. Press the OK soft key to go to the message view screen. Or, the display automatically switches to the screen. 76 77 Picture Messages Picture Messages 3. To scroll through the message, press the or key. If the message has more than one page, you can scroll through the pages by using the and keys. While viewing a message, you can choose the Message options by pressing the Options soft key. If you are viewing a new message, the options are the same as when you view a message as soon as you receive it. See the previous section. When you are reviewing a message, the following options are available:
Delete: deletes the message. Reply: allows you to reply to the sender by sending a text or picture message. Callback: allows you to call the sender back. Cut Address: allows you to extract the senders number, so that you can dial the number or save it in your Phonebook. Forward: allows you to forward the message to another person. Save Picture: allows you to save an image from the message into your phone. Images are stored in the Images folder (Menu 9.4). Save Sound: allows you to save a sound from the message into the Sounds folder (Menu 9.3). Information: shows you information about the message, such as subject, senders address, message size, status and priority. Outbox (Menu 2.2) When you access this menu, the list of the picture messages you sent or saved displays. The icons on the left tell you the status of the messages.
: Messages currently being sent
: Messages sent
: Messages your phone couldnt send
: Messages to be sent
: Messages deferred 1. Select a message on the list and press the Select soft key. The display presents the message and scrolls to the next page, if it has one, after a specified time; for details about setting the time, see page 86. 2. Press the OK soft key to go to the message view screen. Or, the display automatically switches to the screen. 3. To scroll through the message, press the or key. If the message has more than one page, you can scroll through the pages by using the and keys. While viewing a message, you can choose the following options by pressing the Options soft key:
Delete: deletes the message. Cut Address: allows you to extract the destination numbers or addresses, so that you can dial a number or save them in your Phonebook. 78 79 Picture Messages Picture Messages Send: allows you to resend the message. Edit Message: allows you to change the message contents, sound, picture or text. Information: shows you information about the message, such as subject, senders address, message size, status and priority. Draft (Menu 2.3) After creating a picture message, you can store it in this message box for later sending. For further details about viewing a message, see Outbox on page 79. Write New (Menu 2.4) This menu allows you to create a new picture message and then send it to multiple destinations. Creating and Sending a Picture Message 1. Enter the subject of your message and press the OK soft key. For further details about entering characters, see page 42. 2. When Add Here highlights, press the Options soft key and add the message contents using one of the following options:
Add Text: enter the message text and press the OK soft key. Add My Photo: allows you to add a picture you took using the camera on your phone. Select New Photo to take a new picture, or My Photos to add one of the pictures stored in the phone. For further details about using the camera, see page 92. Add Picture: allows you to add a picture stored in the Images folder (Menu 9.4). Choose a picture and press the Select soft key. Add Sound: allows you to add a sound file. Select Record to record a new voice memo, or Sound List to add one of sounds in the Sounds folder (Menu 9.3) or voice memo list
(Menu 7.6.2). Some downloaded sounds may not be added depending on their file format. Send: allows you to send the message. Use this option when you finish creating the message. This option is activated after you add content to the message. Save: saves the message in the Draft (Menu 2.3) or Templates (Menu 2.5) box for later use. This option is activated after you add content to the message. Settings: allows you to change the message settings. For further details about each setting option, see page 86. After changing the settings, you need to press the soft key or the C key to go to back to the options screen. Add Destination: allows you to enter destination numbers or addresses. See steps 7 to 12 starting from page 83. After adding them, you need to press the C key to go to back to the option screen. soft key or the 80 81 Picture Messages Picture Messages Preview: shows your message as it will display on the recipients phone. Note: You can add text, an image and a sound once for each page. 3. When the added content displays, press the key to highlight Add Here. 4. Repeat steps 2 and 3 until you finish creating your message. 5. If you want to change the added items, press or key to highlight one and press the the Options soft key. The following options are available:
Edit Text/Picture/Sound: allows you to change text or replace the image or sound with another one. Add Page: allows you to add more pages. You can move to each page using the key when Page highlights on the message screen. Delete: deletes the item from your message. Duration: allows you to set how long text, an or image or a sound displays on the message presentation screen. After a specified time, the display scrolls to the next item and then continues to the next page. Send: allows you to send the message. Save: saves the message in the Draft (Menu 2.3) or Templates (Menu 2.5) box for later use. Settings: allows you to change the message settings. For further details about each setting options, see page 86. Add Destination: allows you to enter destination addresses. See steps 7 to 12. Preview: shows your message as it will display on the recipients phone. Note: The options available are different depending on the item you select on the message screen. 6. When you are finished creating the message, choose Send from the options and press the Select soft key. 7. Select To, Cc or Bcc to enter a destination number or address and press the Select soft key. 8. Choose one of the following options and press the Select soft key:
Phone Number: allows you to enter the phone number you want. E-Mail: allows you to enter the e-mail address of the recipient to send the message as an e-mail. Phone Book: allows you to retrieve a number from your Phonebook. 9. Enter a number or an e-mail address, or select a number in Phonebook. 10. When the correct number or address displays, press the OK soft key. 11. To add a destination, press the Select soft key when Add Destination highlights. Repeat from step 8. If you want to edit the destinations, select one and press the Select soft key. You can change or delete it. 82 83 Picture Messages Picture Messages Delete All (Menu 2.6) This menu allows you to delete all of the picture messages in each message box. You can also delete all of your messages at one time. To Press the or key. To delete all select a message box to clear of your messages, select All Messages. place a check mark Mark soft key. remove a check mark delete the marked messages Unmark soft key. Delete soft key. When a confirming message displays, press the Yes soft key to confirm. Memory Status (Menu 2.7) You can check the amount of memory for picture messages. The display shows the total space, including the free and used space. It also shows how much space is currently occupied by each message box. 12. When you are finished adding the destinations soft key. to the type, press the C key or the 13. To enter numbers or addresses, repeat steps 7 through 12. You can enter up to 10 destinations for To, CC and Bcc. 14. When you are finished entering the destinations, select Send Message and press the Select soft key on the Picture Msg Send screen. Your phone sends the message. Templates (Menu 2.5) This menu stores messages you saved as templates so that you can use them to make new messages. 1. Scroll through the template list using the or keys. 2. When the message template you want highlights, press the Select soft key. 3. Press the OK soft key to use the following options, or the display automatically shows the options after a specified time:
Edit Message: allows you to send a message using the template. For further details about how to send a message, see page 80. Delete: allows you to delete the message. You are asked to confirm the deletion by pressing the Yes soft key. 4. Press the key to return to Idle Mode. 84 85 Picture Messages Setup (Menu 2.8) You can change the default settings for sending or receiving picture messages. The following options are available:
Delivery Report: when this option is enabled, the network informs you whether or not your message has been delivered. Read Reply: when this option is enabled, your phone sends a request for a reply along with your message to the recipient. Auto Download: you can set whether or not your phone retrieves new incoming messages from the MMS server without notifications. Message Acceptance: you can specify the category of messages you want to receive. Hide ID: when this option is enabled, your phone number does not display on the recipients phone. Expiry Date: you can select the length of time your messages are stored at the message centre after they are sent. Delivery Time: you can set the delay time before the phone sends your messages. Priority: you can select the priority level of your messages. Report Allowed: when this option is disabled, the sender of an incoming message does not receive a delivery report from the network. Page Duration: you can set how long one page of the received message displays on the message presentation screen. After a specified time, the display automatically scrolls to the next page. Picture Messages MMS Profile (Menu 2.9) In this menu, you can configure various network settings that are required when you send or receive multimedia messages. Notes:
The last profile you accessed is automatically activated for sending messages. If you change the MMS settings without the service providers instructions, the MMS feature may not work properly. The following options are available for each profile:
Profile Name: enter a name that you wish to assign to the MMS server. Connection URL: enter the address of your MMS server. Security: select a data transmission mode. Choose Secure to protect your data against unauthorised access; otherwise, choose Non-Secure. IP Address: enter the gateway address required to connect to the MMS server. User Name: enter the user ID required to connect to the MMS server. Password: enter the password required to connect to the MMS server. APN: enter the access point name used for the address of the MMS server. For further details, contact your service provider. 86 87 Call Records In this menu, you can view the:
calls you missed, received or dialled. length of your calls. cost of your calls. Notes:
You can access the numbers in the three types of call records by pressing the key in Idle Mode. The number of call records the phone can store may be different depending on your SIM card. Missed Calls (Menu 3.1) This menu lets you view the last 20 numbers of the calls you received, but did not answer. The number and name, if available, display together with the date and time when the call was received. By pressing the Options soft key, you can:
edit the number, if available, and dial it or save it in Phonebook. delete the call from the list. You can also dial the number by pressing the key. Call Records Received Calls (Menu 3.2) This menu lets you view the last 20 numbers of the calls you received. The number and name, if available, display together with the date and time when the call was received. By pressing the Options soft key, you can:
edit the number, if available, and dial it or save it in Phonebook. delete the call from the list. You can also dial the number by pressing the key. Dialled Calls (Menu 3.3) This menu lets you view the last 20 numbers you dialled. The number and name, if available, display together with the date and time when the call was made. By pressing the Options soft key, you can:
edit the number and dial it or save it in Phonebook. delete the call from the list. You can also dial the number by pressing the key. 88 89 Call Records Delete All (Menu 3.4) This menu allows you to delete all of the records in each call type. You can also delete all of your call records at one time. To Press the select a call type to clear or key. To delete all of your call records, select All Calls. place a check mark Mark soft key. remove a check mark Unmark soft key. delete the marked messages Delete soft key. When a confirming message displays, press the Yes soft key to confirm. Call Time (Menu 3.5) This menu lets you view the timers for calls made and received. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and so on. The following timers are available:
Last Call Time: length of the last call. Total Sent: total length of all calls made since the timer was last reset. Call Records Total Received: total length of all calls received since the timer was last reset. Reset Timers: option used to reset the call timers. You must first enter the phone password (see page 149) and then press the OK soft key. Call Cost (Menu 3.6) This network feature lets you view the cost of calls. This menu may not be shown depending on your SIM card. The following options are available:
Last Call Cost: cost of the last call made. Total Cost: total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set in the Set Max Cost option, you can no longer make any calls until you reset the counter. Max Cost: maximum cost set in the Set Max Cost option. See below. Reset Counters: option used to reset the cost counter. You must first enter your PIN2 (see page 151) and then press the OK soft key. Set Max Cost: option used to enter the maximum cost that you authorise for your calls. You must first enter your PIN2 (see page 151) and then press the OK soft key. Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the cost of your calls. You must first enter your PIN2
(see page 151) and then press the OK soft key. 90 91 Camera Using the camera module embedded in your phone, you can take pictures of people or events while on the move. Additionally, you can send photos to other people in a multimedia message or set one as a wallpaper or power on/off image. You can also record videos using the camera. Take Photos (Menu 4.1) In this menu, you can take a picture. The camera produces JPEG pictures. Note: When you take a picture in direct sunlight or in bright conditions, shadow may appear on the picture. 1. In Idle Mode, press and hold the key to turn on the camera on the top left of the phone. The image to be captured appears on the display. 2. Adjust the image by rotating the camera module and aiming it to the subject. Camera Use the and keys to adjust the brightness of the image. Use the and keys to adjust the image size. Use the and keys on the left side of the phone to flip the image vertically. To use the camera options, press the Options soft key. For details, see page 94. 3. Press the key to take the picture. 4. Press the Save soft key. Your phone saves the picture in the My Photos menu (Menu 4.2). 5. To Press the use the picture options Options soft key. For further details, see below. return to the capture mode Preview soft key or C key. return to the idle screen key. When you press the Options soft key after saving a picture, the following options are available:
Send: allows you to send the picture using a multimedia message. For further details, see page 80. Set This Photo as: allows you to set the picture as your wallpaper for the idle screen or power on or off image. 92 93
| 1 | Users Manual 2 | Users Manual | 1.14 MiB | October 10 2003 |
Camera Camera Protection: allows you to set the picture not to be deleted. Delete: deletes the picture. Using the Camera options In the capture mode, you can use various options by pressing the Options soft key. To Press the scroll to an option or key. select the highlighted option Select soft key or the key. return to the capture mode Back soft key or C key. The following options are available:
Effects: allows you to change the colour tone or apply special effects to the picture. When you select an option, the display shows your setting and prompts you to confirm it. Press the Yes soft key. Frame: allows you to use the frame. Select a frame from the list using the Navigation keys. Multi-Shot: allows you to take action stills. Select the capture speed, High Speed or Normal Speed, and the number of pictures the camera will take. When you press the Take soft key, the camera takes pictures successively. Rotation: rotates the picture. You can reverse the picture as a mirror image or flip the picture vertically. Timer: allows you to have a delay time before the camera takes a picture. Select the length of time you want. When you press the Take soft key, the camera takes the picture after a specified time. Picture Size: allows you to select a picture size. The higher the value, the higher the image quality and larger the file size. Once you change this setting, it is saved for the next shots. Image Quality: allows you to change the image quality. Once you change this setting, it is saved for the next shots. My Photos (Menu 4.2) This menu allows you to review your photos.When you access this menu, your phone displays them in the thumbnail mode, which shows photos as a small image. To view the photos on the full screen, press the View soft key. To go back to the thumbnail mode, press the Multi soft key. Press the Options soft key to use the following options:
Send: allows you to send the photo as a multimedia message. For further details, see page 80. Set This Photo as: allows you to set the picture as your wallpaper for the idle screen or power on or off image. Protection: allows you to set the picture not to be deleted. 94 95 Camera Camera Delete: deletes the picture. Using the Video Options Delete All: deletes all of the pictures saved in your phone. This option Rename: allows you to change the name of the picture. Properties: shows the properties of the picture, such as date and time it was taken, file size, image size, protection status, file format and file name. Video (Menu 4.3) You can record a video that is currently displayed on the camera screen and save it as a video file. Record (Menu 4.3.1) 1. Press the Rec soft key to start recording. If you want to use the video options before recording, press the Options soft key. For details, see the next page. 2. When you are finished, press the Stop soft key. Or, the phone automatically stops when the recording time expires. 3. Press the Save soft key. The video is saved. When you press the Options soft key before starting recording, the following options are available:
(The options are not available on the current phone!!!) Video Clips (Menu 4.3.2) When you access this menu, the thumbnail images of the videos displays. To play back a video:
1. Press the Navigation keys to scroll to the video you want to view. 2. Press the Play soft key to start the playback. 3. To Press the pause the playback Pause soft key. resume Continue soft key. stop the playback Stop soft key. return to the idle screen key. Press the Options soft key to use the following options:
Rename: allows you to change the file name. Delete This: deletes the current video file. Delete All: deletes all of your video files. Protection: allows you to set the video file not to be deleted. 96 97 Sound Settings Alert Type (Menu 5.3) This menu allows you to specify how you are to be informed of incoming calls. The following options are available:
Light Only: the service light flashes; the phone neither rings nor vibrates. Melody: the phone rings using the ring melody selected in the Ring Tone menu (Menu 5.1); see page 98. Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. Keypad Tone (Menu 5.4) This menu allows you to select a tone that the phone sounds when you press a key. To turn the sound off, select Off. Sound Settings You can use the Sound Settings feature to customise various settings, such as the:
ring melody, volume and type. sounds made when you press a key, receive a message, open/close the folder or switch your phone on/off. alert tone made every minute during a call, when you make an error or when your call is connected to the system. Note: When the phone is in Silent Mode (see page 28), you cannot change the sound settings. Ring Tone (Menu 5.1) This menu allows you to select a ring melody. You can choose between many different melodies. Each time you select a melody, it plays for a few seconds. If you have downloaded sounds from the Internet or EasyGPRS programme, you can use them in this menu. Ring Volume (Menu 5.2) This menu allows you to adjust the ring volume to one of five levels. and Use the left side of the phone to increase or decrease the volume. keys or the volume keys on the 98 99 Sound Settings Sound Settings Message Tone (Menu 5.5) Folder Tone (Menu 5.6) This menu allows you to select how the phone informs you that a new message has been received. This menu allows you to select a tone that the phone sounds when you open or close the folder. SMS Tone (Menu 5.5.1) This menu allows you to select how the phone informs you that a new SMS message has been received. The following options are available:
Off: the phone does not use the SMS tone. Light Only: the service light flashes. Vibration: the phone vibrates. Single Beep: the phone beeps once. SMS Tonex: the phone uses one of several SMS tones. SMS-CB Tone (Menu 5.5.2) This menu allows you to select how the phone informs you that a new cell broadcast (CB) message has been received. The following options are available:
Off: the phone does not use the CB tone. Light Only: the service light flashes. Vibration: the phone vibrates. Single Beep: the phone beeps once. SMS-CB Tonex: the phone uses one of several CB tones. To turn the sound off, select Off. Power On/Off (Menu 5.7) This menu allows you to select a melody that the phone sounds when it is switched on and off. To turn the sound off, select Off. Extra Tones (Menu 5.8) You can customise additional tones used for the phone. To turn a given tone Press the on off On soft key. A check mark displays in front of the option. Off soft key again. The check mark no longer displays. 100 101 Sound Settings The following options are available:
Error Tone: sets whether or not the phone informs you when you make a mistake. Minute Minder: sets whether or not the phone beeps every minute during an outgoing call to keep you informed of the length of your call. Connect Tone: sets your phone to beep when your call is connected to the system. Phone Settings Many different features of your phone can be customised to suit your preferences. All of these features are accessed in the Phone Settings menu. Infrared Activate (Menu 6.1) This feature allows you to send or receive data through the infrared port. To use an infrared connection, you must:
configure and activate an IrDA-compliant infrared port on your PC. activate the infrared feature on the phone; the IrDA icon (
display.
) appears on the top line of the align the IrDA port on the phone with the IrDA port on your computer. IrDA port IrDA port The connection is ready for data transmission. If there is no communication between your phone and the IrDA-compliant device within 30 seconds of activating the feature, it is automatically deactivated. Note: For the best performance, use the data link cable supplied in your SGH-P500 kit. 102 103 Phone Settings Phone Settings Display Settings (Menu 6.2) Menu Style (Menu 6.2.2) This menu allows you to select the menu display style. You can choose either Film Style or Page Style. Brightness (Menu 6.2.3) This menu allows you to adjust the brightness of the display screen to see it better in different lighting conditions. Adjust the brightness by using the or the keys keys on the left side of the phone. and and Back Light (Menu 6.2.4) You can select whether or not the phone uses the backlight. A marginal increase in standby/talk time can be achieved by turning the backlight off. Select the length of time the backlight is on. The backlight turns on when you press a key or receive a call or message and remains on for the specified length of time. If you do not want to use the backlight, select Off. In this menu, you can change various settings for the display or backlight. Wallpaper (Menu 6.2.1) This menu allows you to change the background image or the colour of the text to be displayed in Idle Mode. The following options are available:
Wallpaper List: you can select a background image to be displayed on the idle screen. To change the background image:
1. Scroll through the list by pressing the or key. You have various preset images available. You can also select the blank background and any images downloaded from the Internet and the EasyGPRS programme or received by messages. Once you have set a photo as the wallpaper, it displays as My Photo.icn on this list. 2. Press the Select soft key when the image you want highlights. 3. When the image displays, press the Select soft key to display it on the idle screen. Text Display: you can specify whether or not the phone displays the text, such as the date and time and the service providers name. Text Color: you can select a colour of the text to be displayed on the idle screen. 104 105 Phone Settings Phone Settings Auto Light (Menu 6.2.5) Greeting Message (Menu 6.3) This feature helps you to conserve your battery power by allowing you to set the backlight to be used at certain times. The following options are available:
Disable: the backlight is used according to your setting in the Back Light menu (Menu 6.2.4); see page 105. Enable: the backlight is used only during the specified period of time. Enter the time when the phone turns the light on and then turns it off, using the appropriate number keys. Service Light (Menu 6.2.6) This menu allows you to select whether or not the service light is used or in which colour it flashes. Select one of the seven colour settings. When the phone is ready for use, the service light flashes in the appropriate colour. If you do not wish to use the service light, select Off. Graphic Logo (Menu 6.2.7) This menu allows you to display your service providers logo instead of its name. Off: the service providers name displays in Idle Mode. On: the service providers logo stored in your phone displays in Idle Mode; if no logo has been stored, the service providers name displays. This menu allows you to set a greeting to be displayed briefly when the phone is switched on. To Press the clear the existing message enter a new message change the text input mode C key and hold it down until the message is cleared. appropriate alphanumeric keys. right soft key. For further details about how to enter characters, see page 42. Own Number (Menu 6.4) This feature allows you to:
assign a name to each of your own phone numbers registered on your SIM card. edit the names and numbers. This function is a memory aid, which you can use to check your own phone numbers if you need to do so. Any changes made here do not in any way affect the actual subscriber numbers on your SIM card. 106 107 Phone Settings Phone Settings Language (Menu 6.5) Change PIN (Menu 6.6.2) You can select a display language. When the language option is set to Automatic, the language is automatically selected according to the language of the SIM card used. Security (Menu 6.6) The Security feature enables you to restrict the use of your phone to the people and the types of calls of your choice. Various codes and passwords are used to protect the features of your phone. They are described in the following sections. Also see pages 149-152. PIN Check (Menu 6.6.1) When the PIN Check feature is enabled, you must enter your PIN each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval. Note: Before disabling the PIN Check feature, you must enter your PIN. To change your PIN, see the Change PIN menu
(Menu 6.6.2) on the following page. The following options are available:
Disable: the phone connects directly to the network when you switch it on. Enable: you must enter the PIN each time the phone is switched on. This feature allows you to change your current PIN to a new one, provided that the PIN Check feature is enabled. You must enter the current PIN before you can specify a new one. Once you have entered a new PIN, you are asked to confirm it by entering it again. Phone Lock (Menu 6.6.3) When the Phone Lock feature is enabled, the phone is locked and you must enter the 8-digit phone password each time the phone is switched on. The password is preset to 00000000 at the factory. To change the phone password, see the Change Password menu (Menu 6.6.4) below. Once the correct password has been entered, you can use the phone until you switch it off. The following options are available:
Disable: you are not asked to enter the phone password when you switch the phone on. Enable: you are required to enter the phone password when you switch the phone on. Change Password (Menu 6.6.4) The Change Password feature allows you to change your current phone password to a new one. You must enter the current password before you can specify a new one. The password is preset to 00000000 at the factory. Once you have entered a new password, you are asked to confirm it by entering it again. 108 109 Phone Settings Phone Settings SIM Lock (Menu 6.6.5) Extra Settings (Menu 6.7) When the SIM Lock feature is enabled, your phone only works with the current SIM. You must enter the SIM lock code. Once you have entered the lock code, you are asked to confirm it by entering it again. To unlock the SIM, you must enter the SIM lock code. FDN Mode (Menu 6.6.6) The FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited set of phone numbers. The following options are available:
Disable: you can call any number. Enable: you can only call phone numbers stored in Phonebook. You must enter your PIN2. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu is not displayed. To change your PIN2, see the Change PIN2 menu
(Menu 6.6.7) below. Change PIN2 (Menu 6.6.7) The Change PIN2 feature allows you to change your current PIN2 to a new one. You must enter the current PIN2 before you can specify a new one. Once you have entered a new PIN2, you are asked to confirm it by entering it again. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu is not displayed. You can turn the automatic redialling or answering features on or off. To turn a feature Press the on off On soft key. A check mark displays in front of the option. Off soft key. The check mark no longer displays. The following options are available:
Auto Redial: when this option is checked, the phone makes up to ten attempts to redial a phone number after an unsuccessful call. Note: The interval between two call attempts varies. Active Folder: when this option is checked, you can simply open the folder to answer a call. When it is unchecked, you must open the folder and press a key, depending on the setting of the Anykey Answer option. See below. Anykey Answer: when this option is checked, you can answer an incoming call by pressing any key, key and the Reject soft key. To except the key or the Reject reject the call, press the soft key. When this option is unchecked, you can only press the key or Accept soft key. 110 111 Phone Settings Reset Settings (Menu 6.9) You can easily reset your phone to its default settings. To reset your phone:
1. Select the Reset Settings menu. 2. Enter the 8-digit phone password and press the OK soft key. Note: The password is preset to 00000000. To change this password, see page 109. Organiser The Organiser feature enables you to:
set an alarm so that the phone rings at a specific time, such as to remind you of an appointment. view the calendar and organise your schedule. set the current date and time. define a list of things to do. record voice memos. use the phone as a calculator for basic mathematical equations or currency exchange operations. Alarm (Menu 7.1) This feature allows you to:
set the alarm to ring at a specific time. set the phone to switch on automatically and ring the alarm even if the phone is switched off. The following options are available:
Once Alarm: the alarm rings only once and is then deactivated. Daily Alarm: the alarm rings every day at the same time. Morning Call: the alarm rings to wake you up in the morning. 112 113 Organiser To set an alarm:
1. Choose the type of alarm to be set and press the Select soft key. 2. Enter the time for the alarm to sound. Note: Your phone is preset to use 24-hour format. To change the format, see page 118. If you want to use the alarm options, press the Options soft key. The following options are available:
Remove Alarm: deactivates the current alarm. Alarm Sound Set: allows you to select the alarm melody. 3. Press the OK soft key. 4. If you select Morning Call in Step 1, choose the repeat option, Monday to Friday or Monday to Saturday, and press the Select soft key. To stop the alarm when it rings, open the folder and press the Exit soft key. Remove Alarm: deactivates all alarm settings. Autopower: when this option is set to Enable, the alarm rings at the specified time, even if the phone is switched off. If the menu option is set to Disable and the phone is switched off at the specified time, the alarm does not ring. Organiser Calendar (Menu 7.2) With the Calendar feature, you can:
consult the calendar to check your memos. write memos to keep track of your schedule. trigger an alarm, if necessary. Consulting the Calendar When you select the Calendar menu (Menu 7.2), the calendar displays. The following options are available when you press the Options soft key:
Search All: displays all of the memos, starting with the oldest regardless of the day. To scroll through the memos, press the key. or Delete All: allows you to delete all of the memos. You are asked to confirm your action. Go to Date: allows you to go to a specific date. Exit: exits the Calendar feature and returns to Idle Mode. Writing a Memo You can make up to 30 memos for one day. To write or edit a memo on a specific date:
1. Select a date on the calendar, using the navigation keys. Note: To skip to the previous or next month, press the the phone. or key on the left side of 114 115 Organiser Organiser 2. Press the Select soft key. An empty memo screen displays allowing you to enter your memo. 3. Enter your memo and then press the OK soft key. Note: For further details about how to enter characters, see page 42. You are asked if you wish to set an alarm. 4. If you want an alarm to ring on the chosen day, press the Yes soft key. Otherwise, press the No soft key. The memo is saved. 5. If you pressed the Yes soft key, enter the time for the alarm and press the OK soft key. You can also select the melody for the alarm by pressing the Melody soft key. The colour of the date on the calendar changes to green to indicate that a memo exists. Viewing a Memo When you select a day for which a memo already exists on the calendar, the latest memo for the day displays. If more than one memo is stored, press the or key to scroll to the previous or next memo. Press the New soft key to add a new memo to the day. You can use the following options by pressing the Options soft key:
Edit: allows you to change the memo text. Alarm: allows you to set an alarm to ring at the specified time to inform you of the memo. If you set the alarm earlier, you can change or delete it. Delete: allows you to delete the memo. Copy to: allows you to copy the memo to another date. Move to: allows you to change the date of the memo. Time & Date (Menu 7.3) This menu allows you to change the current time and date displayed. You can also use this option to find out what time it is in another part of the world. The following options are available:
Set Time: allows you to enter the current time. You can choose the time format in the Time Format menu (Menu 7.3.4). See below. Note: Before setting the time, you must specify your time zone, in the World Time menu (Menu 7.3.3). Set Date: allows you to enter the day, month and year. 116 117 Organiser Organiser World Time: allows you to find out what time it is in another part of the world, using the keys. and The screen shows the:
city name. current date and time. time difference between the selected city and your city if you have set the local time (see below for further details) or GMT (by default). To select your time zone:
1. Select the city corresponding to your time zone key one or more times. by pressing the The local date and time display. or 2. Press the Set soft key. Time Format: allows you to change the time format to 24 Hours or 12 Hours. Calculator (Menu 7.4) With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication and division. 1. Enter the first number using the numeric keys. Notes:
To delete mistakes or clear the display, press the C key. To include a decimal point or a bracket, press the left soft key until the symbol you want displays. 2. Press the right soft key until the required arithmetic symbol appears: + (addition),
- (subtraction),
(multiplication), / (division). 3. Enter the second number. 4. To view the result, press the key. 5. Repeat steps 1 to 4 as many times as required. To Do List (Menu 7.5) This feature allows you to:
enter a list of tasks to be done. assign a priority and a deadline to each task. sort the tasks by priority and status mark. Creating the To Do List 1. Press the New soft key. 2. Enter the first task. Note: For further details about how to enter characters, see page 42. 3. Press the OK soft key. 4. Select high, normal or low priority using the and keys and press the Select soft key. 5. Enter your deadline and press the OK soft key. If you do not want to set a deadline, press the Skip soft key. 118 119 Organiser Editing the To Do List When you select the To Do List menu (Menu 7.5), the current contents display with the status mark and priority;
Low. for Normal and for High, for To view the details for a specific task To change the status of a specific task To create a new task To edit an existing task highlight the task. press the View soft key. scroll through the tasks using the and necessary. keys, if highlight the task. press the key to mark the task as completed as of the current date and time. or highlight the task. press the Options soft key. select the Mark option. select the appropriate status
(Done or Undo). press the Options soft key. select the New option. enter the text, priority and/
or deadline for the task. highlight the task. press the Options soft key. select the Edit option. change the text, priority and/
or deadline for the task, as required. Organiser To sort the existing tasks by priority or status press the Options soft key. select the Sort option. select the sort criterion
(High, Low, Done or Undo). To copy a task highlight the task. press the Options soft key. select the Copy option. change the text, priority and/
or deadline for the task, as required. To copy a task to the calendar highlight the task. press the Options soft key. select the Copy to Calendar option. change the text and deadline for the task and set the alarm, as required. highlight the task. press the Options soft key. select the Delete option. press the Options soft key. select the Delete All option. confirm the deletion by pressing the OK soft key. To delete a task To delete all tasks To exit the To Do list press the Options soft key. select the Exit option. 120 121 Organiser Organiser Voice Memo (Menu 7.6) 6. Press the OK soft key. You can record up to 5 voice memos of 30 seconds each. After recording, you can send a memo to other people using the multimedia message service. Record (Menu 7.6.1) This menu allows you to record a new memo. When you select this option, the display shows the 30-
second timer. The memo is saved and then the display shows the memo information. 7. Press the Options soft key to use the following memo options:
Send: allows you to send the memo to other people by using the MMS feature. Follow the procedure on page 80. Rename: allows you to change the memos name. 1. To start recording, press the Record soft key. Delete: deletes the memo. 2. Record a memo by speaking into the 8. To exit, press the C or key. microphone. 3. When you press the Stop soft key or the recording time expires, the following options display:
Replay: plays back your memo. Re-record: discards the memo and enables you to record another one. Save: allows you to save the memo. Quit: cancels your recording and exits the Record menu. 4. To save the memo, choose Save from the options and press the Select soft key. 5. Press the C key to clear the default name, if necessary, and enter a name for the memo. For further details about how to enter characters, see page 42. Memo List (Menu 7.6.2) This menu shows your voice memo list. Scroll to a memo and press the Options soft key. The following options are available:
Play: plays back the memo. Send: allows you to send the memo to other people by using the MMS feature. See page 80 for further details about sending a message. Rename: allows you to change the memos name. Information: displays information about the memo, such as name, recording duration, and date and time when the memo was made. Delete: deletes the memo. 122 123 Organiser Delete All (Menu 7.6.3) In this menu, you can delete all of your voice memos. When the confirming message appears, press the Yes soft key. To cancel the deletion, press the No soft key. Currency Exchange (Menu 7.7) Using this menu, you can make currency conversions. 1. Enter the current exchange rate of your source currency and press the OK soft key. You can insert a decimal point by pressing the key. 2. Enter the amount to convert and press the OK soft key. The amount you entered and its equivalent value display. 3. Press the Exit soft key to exit the currency convertor. 124 Network Services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you wish. Call Diverting (Menu 8.1) This network service enables incoming calls to be rerouted to the number that you specify. Example: You may wish to divert your business calls to a colleague while you are on holiday. Call diverting can be set up in the following ways:
Divert Always: all calls are diverted. Busy: calls are diverted when you are already on another call. No Reply: calls are diverted when you do not answer the phone. Unreachable: calls are diverted when you are not in an area covered by your service provider. Cancel All: all call diverting options are cancelled. You can specify individual diverting options for each of the following call types:
Voice calls only Data calls only 125 Network Services Network Services To set your call diverting options:
Call Barring (Menu 8.2) 1. Select the type of call diverting by pressing the or key, and then press the Select soft key. 2. Select the type of calls to be diverted by pressing the Select soft key. or key, and then press the The current status displays. If the option has already been set, the number to which the calls are diverted displays. 3. To Press the activate call diverting Activate soft key. Go to Step 4. change the number to be called Change soft key. Go to Step 4. deactivate call diverting Remove soft key. 4. Enter the number to which the calls are to be diverted and press the OK soft key. To enter an international code, press the 0 key until the + sign displays. The phone sends your settings to the network and the networks acknowledgement displays. You can deactivate all call diverting settings by selecting the Cancel All option. The call barring network service allows you to restrict your calls. Call barring can be set up in the following ways:
All Outgoing: calls cannot be made. International: international calls cannot be made. International Except to Home: when abroad, calls can be made only to numbers within the current country and to your home country, which is the country where your home network provider is located. All Incoming: calls cannot be received. Incoming While Abroad: calls cannot be received when you are using your phone outside of your home service area. Cancel All: all call barring settings are deactivated;
calls can be made and received normally. You can specify individual barring options for each of the following call types:
Voice calls only Data calls only To set your call barring options:
1. Select the type of call barring by pressing the key, and then press the Select soft key. or 2. Select the type of calls to be barred by pressing key, and then press the Select soft or the key. 126 127 Network Services Network Services 3. Press the Activate soft key to confirm your settings. 4. Enter your call barring password supplied by your service provider. The phone sends your settings to the network and the networks acknowledgement displays. To deactivate specific call barring settings:
1. Select the call barring option to be deactivated. 2. Select the type of call to which this option applies. 3. Press the Deactivate soft key. 4. Enter your call barring password supplied by your service provider. The phone sends your settings to the network and the networks acknowledgement displays. You can also deactivate all call barring settings by selecting the Cancel All option. Change Barring Password: you can set and change the call barring password obtained from your service provider using this option. You must enter the current password before you can specify a new one. Once you have entered a new password, you are asked to confirm it by entering it again. Call Waiting (Menu 8.3) This network service informs you when someone is trying to reach you during another call. You can specify individual call waiting options for each of the following call types:
Voice calls only Data calls only To set your call waiting options:
1. Select the type of calls to which you want to apply the call waiting option by pressing the or key, and then press the Select soft key. The screen informs you whether call waiting is activated or deactivated. 2. You can activate or deactivate the call waiting feature as necessary by using the Activate or Deactivate soft key respectively. To return to the previous screen, press the Exit soft key. You can also deactivate all call waiting settings by selecting the Cancel All option. 128 129 Network Services Network Services Network Selection (Menu 8.4) Caller ID (Menu 8.5) The Network Selection feature enables you to automatically or manually select the network used when roaming outside of your home area. You can prevent your phone number from being displayed on the phone of the person being called. Note: Some networks do not allow the user to change Note: You can select a network other than your home this setting. network only if there is a valid roaming agreement between them. To indicate to automatically or manually select the network when roaming:
1. When Network Selection displays, press the Select soft key. 2. Press the or key until the appropriate option highlights and then press the OK soft key. If you select Automatic, you are connected to the first available network when roaming. If you select Manual, the phone scans for the available networks. Go to Step 3. 3. Press the or key until the preferred network highlights and then press the OK soft key. You are connected to that network. The following options are available:
Default: the default setting provided by the network is used. Hide Number: your number does not display on the other persons phone. Send Number: your number is sent each time you make a call. Closed User Group (CUG) (Menu 8.6) This network service allows incoming and outgoing calls to be restricted to a selected user group. You may be a member of up to ten user groups. For details on how to create, activate and use a closed user group, contact your service provider. Example: A company lends SIM cards to its employees and wants to restrict outgoing calls to members of the same team. Activating a Closed User Group If you select the Closed User Group menu, you can enter the CUG function. You can now access the following options after pressing the Select soft key:
130 131 Network Services Network Services Index List: lets you list, add or delete CUG index numbers. The list of current CUG indexes appears. Add a new CUG index as advised by your service provider or delete a group. To scroll through the existing CUG indexes add a new CUG index Press the or key. Options soft key, select the Add option and enter the index. delete a CUG index Options soft key and select the Delete option. activate a CUG index Options soft key and select the Activate option. Outside Access: lets you enable or disable calls to numbers other than those in the Closed User Group. This feature depends on the nature of your CUG subscription. Please check with your service provider. Default Group: you may set a default CUG with your service provider. If you have done so, you can enable the Default Group option on your phone. When making a call, you are given the option of using your default CUG, instead of selecting one from the list. Deactivate: deactivates the CUG function. This menu appears only when the default group is enabled or a CUG index is selected. Band Selection (Menu 8.7) For the phone to make and receive phone calls, it must register with one of the available networks. Your phone can handle either of the following types of networks:
GSM 900 GSM 1800 Combined GSM 900/1800 GSM 1900 The country where you purchased your phone determines the default band that it uses. When you travel abroad, you must remember to change to an appropriate band. 1. When Band Selection displays, press the Select soft key. 2. Press the or key until the appropriate option, GSM 900/1800 or GSM 1900, highlights and press the OK soft key. When you select a new band, your phone displays a confirmation message and then automatically searches for all of the available networks. Your phone registers with a preferred network within the band. 132 133 Funbox The Funbox menu contains several fun options. WAP Browser (Menu 9.1) Your phone is equipped with a WAP (Wireless Application Protocol) browser to allow you to access and navigate the Wireless Web via your phone. Home (Menu 9.1.1) Selecting this menu connects the phone to the network and loads the homepage of the Wireless Web service provider. You can also press the in Idle Mode. key The content of the WAP Browser startup homepage depends on your Wireless Web service provider. To scroll through the screen, use the keys. and Note: To access the startup homepage from any other screen in the WAP browser, use the Home option. For further details about the WAP Browser menus, see page 136. Exiting the WAP Browser To exit the browser at any time, simply press the key. Funbox Navigating the WAP Browser To Press the scroll through and select browser items select a numbered item return to the previous page return to the startup homepage key until the symbol or points to the item, and then press the Select soft key to confirm the selection. corresponding numeric key. Back soft key or the C key. key and select the Home option. For further details about this option, see page 136. Entering Text in the WAP Browser When you are prompted to enter text, the current text entry mode is indicated on the screen. The following modes are available:
Upper-case character (A): allows you to enter upper-case English characters. Lower-case character (a): allows you to enter lower-case English characters.
): allows you to enter English characters by T9 (
pressing one key per letter. In this mode, you can use only the 0 key to display alternative words. To change the case, press the key. Number (1): allows you to enter numbers. 134 135 Funbox To change modes To enter a space press the times. key one or more press the key. To edit text set the cursor to the right of the character(s) to be corrected. press the C key as required. enter the correct character(s). Selecting and Using Browser Menu Options Various menu options are available when you are using the WAP Browser to navigate the Wireless Web. To access a menu option:
1. Press the key. A menu list displays. 2. Highlight a menu by pressing the or key. 3. Select an option by pressing the Select soft key. 4. If necessary, select the secondary option using keys, and press the Select soft and the key to confirm. Note: The menus may vary, depending on your version of the WAP browser. Funbox The following options are available:
Reload: reloads the current page. Home: takes you back at any time to the home page of the Wireless Web service provider. Goto URL: allows you to manually enter the URL address of a Web page. After entering an address, press the OK soft key to go there directly. Show URL: displays the URL address of the Web page to which you are currently connected. It also enables you to set the current site as the startup home page. To Press the set the current page as your startup home page Option soft key, select the Save to Home option and press the Select soft key. set a bookmark for the current page Option soft key, select the Save to Bookmark option and press the Select soft key. cancel your setting Back soft key. Edit Home: allows you to change the startup home page manually. Enter the URL and press the OK soft key. For further details about entering text, see page 135. Clear Cache: deletes the information stored in the cache, which stores the most recently accessed Web pages. Inbox: allows you to read messages received from the web server. 136 137 Funbox Funbox Favorite (Menu 9.1.2) Settings (Menu 9.1.4) This menu allows you to store the URL addresses of up to five of your favourite web sites. You can access this menu directly by pressing and holding the key while using the WAP browser. To store a URL address:
1. Select an empty location and press the Options soft key. 2. Enter the address and press the Enter soft key. For further details about how to enter characters, see page 42. 3. Enter a name for the favourite item and press the Enter soft key. After saving favourite items, you can use the following options by pressing the Options soft key:
Goto URL: quickly accesses you to the site. Edit: allows you to edit the address. Delete: deletes the address. http:// (Menu 9.1.3) This menu allows you to manually enter the URL address of the Web site that you wish to access. You can access this menu directly by pressing and holding the key in the WAP browser. For further details about how to enter characters, see page 42. This menu allows you to set up five proxy servers for the WAP browser. Contact your service provider for details about your Settings options. For each server, the following options are available:
Profile Name: enter a name that you wish to assign to the HTTP proxy server. Homepage URL: set the address of your startup homepage. When the default homepage displays, you can delete it using the C key and enter your own choice. Security: select a data transmission mode. Choose Secure to protect your data against unauthorised access; otherwise, choose Non-Secure. Bearer: select a bearer to be used for each type of network address accessed; GPRS or Data. When the bearer is set to GPRS:
IP Address: enter the WAP gateway address required to connect to the Internet. User Name: enter the User ID required to connect to the GPRS network. Password: enter the password required to connect to the GPRS network. APN: enter the access point name used for the address of the GPRS network gateway. When the bearer is set to Data:
IP Address: enter the WAP gateway address required to connect to the Internet. Login Name: enter the PPP server login ID. 138 139 Funbox Funbox Password: enter the PPP server password. Dial-up Number: enter the PPP server phone number. Data Call Type: select a data call type; Analogue or ISDN. Note: The WAP browser settings may vary, depending on the service provider. Contact your service provider for further details. Clear Cache (Menu 9.1.5) You can clear the information stored in the cache, the phones temporary memory which stores the most recently accessed Web pages. Press the Yes soft key to confirm the deletion. Otherwise, press the No soft key. Push Message (Menu 9.1.6) In this menu, you can receive and access web messages from the server. The following options are available:
Inbox: allows you to read the messages received from the web server. Receive: allows you to set whether or not your phone receives web messages. Delete All: allows you to delete all of the web messages. Games (Menu 9.2) You can download MIDlets (Java applications running on mobile phones) from various sources using the WAP Browser and store them in your phone. When you access the Games menu, the list of the default games appears. Once you have downloaded games, they are added to the list. Note: Java services may be unavailable depending upon the service provider. Launching a MIDlet 1. Scroll to the MIDlet you want on the Games list and press the Launch soft key. 2. On the startup screen of the MIDlet, scroll to an option using the Navigation keys. The following options are available:
START GAME: starts a new game. CONTINUE: allows you to continue the last game you played. HIGH SCORE: shows the high score table. This option may not be available for some games. HOW TO PLAY: shows how to play the game and the key functions for the game. OPTION: allows you to switch the game sound on or off. 3. Press the key to confirm your selection. 140 141 Funbox Funbox While you are playing a game, to Press the adjust the sound volume Volume keys. stop the game and return to the startup screen C key. exit the game key. Viewing MIDlet Information 1. Scroll to the MIDlet you want and press the Info soft key. The display shows information about the MIDlet, such as file size, application version and its vendor. 2. To scroll to other MIDlet information, press the or key. 3. If you want to delete the MIDlet, press the Delete soft key and then press the Yes soft key to confirm the deletion. Note: When you select the default games from the list, the Delete option is not available, so that you cannot delete them. 4. To exit and return to the Games screen, press the Back soft key or the C key. Changing the DNS Settings The DNS (Domain Name Server) is the server that resolves the Java server domain name into the IP address. The DNS setting is preset at the factory, but sometimes you may need to change it at your service providers instructions. 1. Scroll to Settings on the Games list and press the Select soft key. 2. Enter the primary address using the number keypad and press the OK soft key. 3. Enter the secondary address and press the OK soft key. Entering Text For entering text while using a MIDlet, the following input modes are available:
Upper-case character (A): allows you to enter upper-case English characters. Lower-case character (a): allows you to enter lower-case English characters. Number (1): allows you to enter numbers. Symbol: allows you to enter symbols. After highlighting a symbol by pressing the navigation keys, press the key to insert it.
): allows you to enter English characters by T9 (
pressing one key per letter. In this mode, you can change the case by pressing the 0 key. To change the text input mode, press the key until the appropriate indicator appears on the soft key area of the display. 142 143 Funbox Delete All (Menu 9.5) This menu allows you to delete all of the downloaded items in the Games, Sounds and Images folders. You can delete all of the items at one time. To Press the key. To delete all of your items, select All. or select a folder to clear place a check mark Mark soft key. remove a check mark Unmark soft key. delete the marked items Delete soft key. When a confirming message displays, press the Yes soft key to confirm. Memory Status (Menu 9.6) You can check the amount of memory for games or sounds and images. The display shows the total, free and used space, and the number of objects you downloaded. Funbox Sounds (Menu 9.3) In this menu, you can view the list of sounds downloaded from the web server or received in multimedia messages. You can set the downloaded sounds as the current ring tone or send them to other phones. By pressing the Options soft key, you can use the following options:
Rename: allows you to change the name of the sound. Delete: deletes the sound. Set as Ring Tone: sets the sound as your ring tone. Images (Menu 9.4) In this menu, you can view the list of pictures downloaded from the web server or received in messages. You can set the downloaded pictures as the current background image or send them to other phones. If you set a photo as your wallpaper, it displays as My Photo.icn on the list. By pressing the Options soft key, you can use the following options:
Rename: allows you to change the name of the image. Delete: deletes the image. Set as Wallpaper: sets the image as your wallpaper. 144 145 Solving Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call. When you switch your phone on, the following messages may appear:
Insert SIM Card Check that the SIM card is correctly installed. Phone Locked Enter Password The automatic locking function has been enabled. You must enter the phones password before you can use the phone. Enter PIN You are using your phone for the first time. You must enter the Personal Identification Number
(PIN) supplied with the SIM card. The PIN Check feature is enabled. Every time the phone is switched on, the PIN has to be entered. To disable this feature, use the PIN Check menu
(Menu 6.6.1). Enter PUK The PIN code was entered incorrectly three times in succession and the phone is now blocked. Enter the PUK supplied by your network operator. Solving Problems No service, Network failure or Not done displays The network connection was lost. You may be in a weak signal area (in a tunnel or surrounded by buildings). Move and try again. You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details. You have entered a number but it was not dialled Have you pressed the key?
Are you accessing the right cellular network?
You may have set an outgoing call barring option. Your correspondent cannot reach you Is your phone switched on (the key pressed for more than one second)?
Are you accessing the right cellular network?
You may have set an incoming call barring option. Your correspondent cannot hear you speaking Have you switched off the microphone?
Are you holding the phone close enough to your mouth? The microphone is located at the bottom of the phone. 146 147 Solving Problems The phone starts beeping and
**Warning** Low Battery flashes on the display Your battery is insufficiently charged. Recharge the battery. The audio quality of the call is poor Check the signal strength indicator on the display
); the number of bars indicates the signal
strength from strong (
) to weak ( ). Try moving the phone slightly or moving closer to a window if you are in a building. No number is dialled when you recall a Phonebook entry Check that the number has been stored correctly, by using the Phonebook Search feature. Re-store the number, if necessary. If the above guidelines do not help you to solve the problem, take note of:
the model and serial numbers of your phone your warranty details a clear description of the problem Then contact your local dealer or Samsung after-
sales service. Access Codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorised use. When requested for any of the codes explained below, enter the appropriate code (displayed as asterisks) and press the OK soft key. If you make a mistake, press the C key one or more times until the incorrect digit is cleared and then continue entering the correct code. The access codes, except for the PUK and PUK2 codes, can be changed using the Security menu
(Menu 6.6). See page 108 for further details. Important! Avoid using access codes resembling emergency numbers, such as 112, so that you do not accidentally dial an emergency number. Phone Password The Phone Lock feature uses the phone password to protect your phone against unauthorised use. The phone password is supplied with the phone and is preset to 00000000 at the factory. To activate/deactivate the Phone Lock feature change the phone password See page 109
(Menu 6.6.3). page 109
(Menu 6.6.4). 148 149 Access Codes PIN The Personal Identification Number or PIN (4 to 8 digits) protects your SIM card against unauthorised use. It is usually supplied with the SIM card. If you enter an incorrect PIN three times in succession, the code is disabled and cannot be used until you re-enable it by entering the PUK (see below). To See activate/deactivate the PIN Check feature page 108
(Menu 6.6.1). change the PIN page 109
(Menu 6.6.2). PUK The 8-digit PUK (PIN Unblocking Key) is required to change a disabled PIN. The PUK may be supplied with the SIM card. If not, or you have lost it, contact your service provider. To re-enable your PIN:
1. Enter the PUK and press the OK soft key. 2. Enter a new PIN of your choice and press the OK soft key. 3. When the Confirm New PIN message displays, enter the same code again and press the OK soft key. If you enter an incorrect PUK ten times in succession, the SIM card becomes invalid. Contact your service provider for a new card. Access Codes PIN2 The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to access specific functions, such as setting the maximum cost of a call. These functions are available if supported by your SIM card. If you enter an incorrect PIN2 three times in succession, the code is disabled and you cannot access the functions until you re-enable it by entering the PUK2. To change the PIN2, see page 110 (Menu 6.6.7). PUK2 The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some SIM cards, is required to change a disabled PIN2. If you lose the code, contact your service provider. To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key. 2. Enter a new PIN2 of your choice and press the OK soft key. 3. When the Confirm PIN2 message displays, enter the same code again and press the OK soft key. If you enter an incorrect PUK2 ten times in succession, you will not be able to access the functions requiring the PIN2. Contact your service provider for a new card. 150 151 Access Codes Barring Password A 4-digit barring password is required when you use the Call Barring function. You can obtain the password from your service provider when you subscribe to this function. You can change this password in the Call Barring menu (Menu 8.2). See page 128 for further details. 152 Health and Safety Information Exposure to Radio-Frequency Energy
(SAR Information) This phone meets European Union (EU) requirements concerning exposure to radio waves. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured so as not to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through the periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for mobile phones employs a unit of measurement known as SAR (Specific Absorption Rate). The SAR limit recommended by the EU Council is 2.0W/kg.*
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR values may vary depending on national reporting requirements and the network band. 153 Health and Safety Information Exposure to Radio Frequency (RF) Signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission
(FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards that were developed by independent scientific organizations through periodic and through evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless phones employs a unit of measurement known as Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/kg *.
*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 154 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn SAR tests are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID printed in the label on the phone. FCC certification information for this model phone is attached separation paper. For Body Operation This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 1.5 cm separation distance between the user's body and the back of the phone,including the antenna. The use of belt-clips, holsters, and similar accessories should not contain metallic components. The use of accessories that do not satisfy these requirements may not comply with For more Information concerning exposure to radio frequency signals, see the following websites:
Federal Communications Commission (FCC) http://www.fcc.gov/rfsafety Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com U.S.Food and Drug Administration (FDA) http://www.fda.gov/cdrh/consumer World Health Organization (WHO) http://www.who.int/peh-emf/en 155 156 Health and Safety Information Health and Safety Information SAR tests are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the phone. Before a new model phone is available for sale to the public, compliance with the European R&TTE Directive must be shown. This directive includes as one of its essential requirements the protection of the health and safety of the user and any other person. Precautions When Using Batteries Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. Use only Samsung-approved batteries and recharge your battery only with Samsung-
approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first. Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 C (32 F). Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. 157 158 Health and Safety Information Health and Safety Information Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your Phonebook takes your attention away from your primary responsibility-
driving safely. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial an emergency number in case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call an emergency number, as you would want others to do for you. 10. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-emergency wireless number. 159 160 Health and Safety Information Health and Safety Information Operating Environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its users guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers:
Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is switched on Should not carry the phone in a breast pocket Should use the ear opposite the pacemaker to minimise potential interference If you have any reason to suspect that interference is taking place, switch your phone off immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. 161 162 Health and Safety Information Health and Safety Information Posted Facilities Emergency Calls Switch off your phone in any facility where posted notices require you to do so. Potentially Explosive Environments Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch the phone off while at a refuelling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas, such as propane or butane, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call, proceed as follows. 1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location (for example, 112 or any other official emergency number). Emergency numbers vary by location. 3. Press the key. If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so. 163 164 Health and Safety Information Health and Safety Information Other Important Safety Information Care and Maintenance Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch your phone off before boarding an aircraft. The use of wireless phones in aircraft may be dangerous to the operation of the aircraft, and is illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both. Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of small children. Keep the phone dry. Precipitation, humidity and liquids contain minerals that corrode electronic circuits. Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone. Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phones electronic circuit boards. Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. 165 166 Health and Safety Information Do not paint the phone. Paint can clog the devices moving parts and prevent proper operation. Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. Use only the supplied or an approved replacement antenna. Unauthorised antennas or modified accessories may damage the phone and violate regulations governing radio devices. If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features of your mobile phone, here are a few definitions:
Active Folder Ability to answer a call simply by opening the phone. Call Barring Ability to restrict outgoing and incoming calls. Call Diverting Ability to reroute calls to another number. Call Holding Ability to put one call on standby while answering or making another call; you can then switch between the two calls, as required. Call Waiting Informs you that you have an incoming call when you are engaged on another call. Caller Line Identification Services (Caller ID) Services allowing subscribers to view or block the telephone numbers of callers. 167 168 Glossary Glossary EMS (Enhanced Message Service) Java An adaptation of the Short Message Service (SMS) that allows you to send and receive ring tones and service providers logo, as well as combinations of simple media to and from EMS-compliant handsets. Because EMS is based on SMS, it can use SMS centres the same way that SMS does. EMS works on all Global System for Mobile communications
(GSM) networks. EMS senders can use text, melodies, pictures, sounds, and animations to enhance the expressive power of messages that are limited by the display constraints of mobile devices. GPRS (General Packet Radio Service) New non-voice value-added service that allows information to be sent and received across a mobile telephone network. GPRS provides continuous connection to the Internet for mobile phone and computer users. It is based on the Global System for Mobile Communication (GSM) circuit-switched cellular phone connections and the Short Message Service (SMS). GSM (Global System for Mobile Communication) International standard for cellular communication, guaranteeing compatibility between the various network operators. GSM covers most European countries and many other parts of the world. Programming language generating applications that can run on all hardware platforms, whether small, medium or large, without modification. It has been promoted for and geared heavily to the Web, both for public Web sites and Intranets. When a Java program runs from a Web page, it is called a Java applet. When it is run on a mobile phone or pager, it is called a MIDlet. MMS (Multimedia Message Service) A message service for the mobile environment, standardized by the WAP Forum and the 3rd Generation Partnership Program (3GPP). For phone users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of user-created content from phone to phone. The message addressing used is primarily phone numbers, thus the traffic goes from phone to phone. MMS also provides support for e-mail addressing, so that messages can be sent by e-mail. In addition to the text content of SMS, MMS messages can contain still images, voice or audio clips, and also video clips and presentation information. Multi-party Calling Ability to establish a conference call involving up to five additional parties. Phone Password Security code used to unlock the phone when you have selected the option to lock it automatically each time it switches on. 169 170 Glossary Glossary PIN (Personal Identification Number) SMS (Short Message Service) Security code that protects the phone against unauthorised use. The PIN is supplied by the service provider with the SIM card. It may be a four to eight-digit number and can be changed, as required. Network service sending and receiving messages to and from another subscriber without having to speak to the correspondent. The message created or received can be displayed, received, edited or sent. PUK (PIN Unblocking Key) Security code used to unlock the phone when an incorrect PIN has been entered three times in succession. The eight-digit number is supplied by the service provider with the SIM card. Roaming Use of your phone when you are outside your home area (when travelling for example). SDN (Service Dialling Numbers) Telephone numbers supplied by your network provider and giving access to special services, such as voice mail, directory inquiries, customer support and emergency services. SIM (Subscriber Identification Module) Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscribers personal data). The SIM card fits into a small slot on the back of the phone and is protected by the battery. Soft Keys Two keys marked purpose of which:
and on the phone, the varies according to the function that you are currently using. is indicated on the bottom line of the display just above the corresponding key. Tri Band Ability to handle any of the following types of network; GSM 900, GSM 1800, combined GSM 900/
1800 and GSM 1900 MHz bands, for greater call success and wider roaming. Your phone automatically searches for the last network used. If, for any reason, this network is unavailable, your phone will attempt to register with a different network. Voice Mail Computerised answering service that automatically answers your calls when you are not available, plays a greeting (optionally in your own voice) and records a message. 171 172 Index Index A Access codes Active folder 113 Alarm Alert type Alphabet mode, text input 149 111 99 46 Anykey answer 111 Auto redial 111 B Background image Backlight time, set Backlight Backlight, auto Barring, calls Battery 127 15 106 104 105 charge install remove 19 18 17 Battery low indicator Battery precautions Brightness, display Broadcast messages 134 Browser, WAP 20 154 105 74 C 118 Calculator Calendar memos 117 117 116 115 copy delete view write 91 89 26, 88 Call back, message Call costs Call numbers dialled missed received Call records 90 Call time Caller groups 37 89 88 edit search 36 65 Caller ID Calls 131 25 125 127 answer bar divert end hold make redial wait 23 49 22 23 54, 129 Camera take picture view picture 92 95 messages CB (Cell Broadcast) 74 Characters, enter Closed User Group (CUG) 42 131 Conference call Connect tone 91 Cost, calls Currency exchange 54 102 124 D Date, set Delivery reports, message 117 71 Dialled calls Display 89 15 external 14 Display icons 125 Divert, calls DTMF tones, send 52 E Earpiece volume Emergency calls EMS (Enhanced Message 24 161 Service) 64 102 Error tone External display 15 F FDN (Fixed Dial Number) mode Folder tone Forward, picture message 110 101 78 Front LCD 15 G Games Greeting message 141 107 H Hold, call 49 I Icons, description Inbox, messages 76 picture 64 text Infrared, connect International calls Internet 134 14 103 22 J Java service 141 K Key volume Keypad tones 24 select send 99 52 Keys description 10 location 11 L Language, select Last number, redial Lock phone SIM card 109 110 108 23 Low battery indicator 20 M Memory status downloaded items phonebook picture messages 72 text messages 41 145 85 Menus access 58 list 57 Message tone Messages 100 74 cell broadcast 107 greeting multimedia 76 picture 64 text 73 voice 76 MIDlets, launch 141 Minute minder 102 Missed calls 26, 88 Morning call 113 Multimedia messages (MMS) 76 Multi-party calls 54 Mute all sounds 28 key tones 52 microphone 51 N Names enter 42 search/dial 35 Network band, select 133 Network services 125 Numbers, phone search/dial 35 store 31 173 174 Index O Organiser 113 Outbox, messages picture 79 text 66 Own number 107 P Password Phone Phonebook call bar 128, 152 phone 109, 149 lock 109 password 149 copy 34 delete 34, 40 edit 34 options 34 search/dial 35 speed-dial 38 store 31 Photos take 92 view 95 Picture messages create/send 80 delete 78, 79 edit 80 read 76, 79 set 81 change 109 description 150 PIN PIN2 change 110 description 151 Power on/off tone 101 PUK 150 PUK2 151 R Received calls 89 Received messages picture 76 text 64 Redial automatically 111 manually 23 Reset 112 Ring tone 98 Ring type 99 Ring volume 98 Roaming 130 S Safety information 153 precautions 7 Scheduler 115 Search, phonebook 35 Security, calls 108 Sent messages picture 79 text 66 Service light 16, 106 Silent mode 28 SIM card install 17 lock 110 Inbox 64 Outbox 66 Soft keys 29 Sounds, set 98 Speed-dial 38 Switch on/off microphone 51 phone 21 Symbol, text input 48 SMS (Short Message Service) Index W Waiting call 129 Wallpaper 104 WAP browser access 134 cache, clear 140 favorites 138 World time 118 T T9 mode, text input 44 Tasks, to do list create 119 edit 120 Templates picture 84 text 70 Text input mode 43 Text message delete 65, 66, 72 read 64, 66 send 67 set 70 Text, enter 42 Time format 118 Time, set 117 To do list 119 Tone connect 102 error 102 folder 101 keypad 99 message 100 ring 98 Travel adapter 19 U User group 131 V Vibration 99 Voice mail 73 Voice memo delete 123 play 123 record 122 Voicemail server 73 Volume, adjust earpiece 24 keypad tone 24 ring 98 175 176 177
. y e k e h t s s e r p y l f e i r B l l a C a d n E d n a e n o h p e h t n e p O t f o s w e i V e h t s s e r p
. y e k d n a e h t h t i w l l o r c S e h t h g u o r h t s y e k
. s l l a c d e s s i m s s e r p
, l l a c e h t n r u t e r o T
. y e k e h t d e s s i M w e V i s l l a C l i y e t a d e m m I g n i s s i M r e t f A m e h T e n o h p e l e T S R P G 0 0 5 P
H G S d n a B i r T d r a C e c n e r e f e R k c i u Q
. y e k t f o s u n e M e h t s s e r P l e h t d o h d n a s s e r P
. y e k f f O
n O h c t i w S d n a e h t h t i w l l o r c S h c a e r u o y l i t n u s u n e m e h t f o t s i l e h t h g u o r h t s y e k
. t n a w u o y u n e m e h t
. r e b m u n e h t r e t n E
. y e k e h t s s e r P l l a C a e k a M
. y e k t f o s t c e l e S e h t s s e r P e h t s s e c c A s n o i t c n u F u n e M d n a e h t h t i w l l o r c S e n o e h t l i t n u s n o i t p o e h t f o t s i l e h t h g u o r h t s y e k l
. d e t c e e s s i t n a w u o y
. y e k t f o s t c e l e S e h t s s e r P e h t f o e n i l m o t t o b e h t n o
, t i e v o b a t x e t e h t y b d e t a c i d n i n o i t c n u f e h t m r o f r e p
) d n a
s y e k t f o s o w t e h t f o h c a E l
. y a p s i d 178 S t o r e P h o n e b o o k N u m b e r s i n M e l o d y L i g h t O n l y i V b r a t i o n i V b r a
M e l o d y l S e e c t a n o p t i o n
l S e e c t a m e m o r y
. P r e s s t h e S e l e c t s o f t k e y
. P r e s s t h e S e l e c t s o f t k e y
. l S e e c t a n i c o n
. E n t e r t h e n u m b e r a n d p r e s s t h e S a v e s o f t k e y
. P r e s s t h e S e l e c t s o f t k e y
. l A e r t T y p e C h o o s e t h e m e n u
M e n u 5
. 3
. l S e e c t t h e A l e r t T y p e l V o u m e A d j u s t t h e C a l l A n s w e r a o r P r e s s t h e k e y
. O p e n t h e p h o n e l e f t s i d e o f t h e p h o n e
. P r e s s t h e o r k e y o n t h e P h o n e b o o k N u m b e r i n S e a r c h f o r a
c o n t i n u e d
) S t o r e P h o n e b o o k N u m b e r s i n n u m b e r s
, p r e s s t h e T o s c r o l l t h r o u g h t h e P r e s s t h e V i e w s o f t k e y
. k e y
. n a m e s
, p r e s s t h e T o s c r o l l t h r o u g h t h e o r o p t i o n
. l S e e c t t h e S e a r c h k e y
. P r e s s t h e N a m e s o f t o f t h e n a m e
. E n t e r t h e f i r s t f e w l e t t e r s r e t u r n t o I d e M o d e
. l P r e s s t h e k e y t o P r e s s t h e O K s o f t k e y
. l o c a t i o n n u m b e r
. I f n e c e s s a r y
, c h a n g e t h e E n t e r t h e n a m e
. P r e s s t h e O K s o f t k e y
. P r e s s t h e o r k e y
. k e y t o d a l
. i 179 Declaration of Conformity (R&TTE) For the following product :
TRI BAND GSM TELEPHONE
(Product Name) SGH-P500
(Model Number) Manufactured at :
Samsung Electronics, 94-1 Imsu-Dong, Gumi City, Kyung Buk, Korea, 730-350
(factory name, address*) to which this declaration relates, is in conformity with the following standards and/or other normative documents. Safety EMC SAR Network
: EN 60950:2000
: EN 301 489-1:2000 EN 301 489-7:2000
: EN 50360:2001 OET Bulletin 65, Supplement C:2001
: EN 301 511 V7.0.1 We hereby declare the [all essential radio test suites have been carried out and that] the above named product is in conformity to all the essential requirements of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ, UK Identification mark: 168 The technical documentation kept at:
Samsung Electronics Euro QA Lab. which will be made available upon request.
(Representative in the EU) Samsung Electronics Euro QA Lab. Blackbushe Business Park, Saxony Way, Yateley, Hampshire, GU46 6GG, UK 2003. 3. 26 In-Seop Lee / S. Manager
(place and date of issue) (name and signature of authorised person)
* This is not the address of the Samsung Service Centre. For the address or the phone number of the Samsung Service Centre, see the warranty card or contact the retailer where you purchased your phone. Index 180
. r e b m u n e h t n i y e K
. y e k e h t s s e r P l l a C a e k a M
. y e k t f o s t c e l e S e h t s s e r P e n o h p e l e T S R P G 5 1 7 E
H G S d n a B i r T d r a C e c n e r e f e R k c i u Q
. y e k t f o s u n e M e h t s s e r P l e h t d o h d n a s s e r P
. y e k f f O
n O h c t i w S u o y l i t n u s u n e m e h t f o t s i l
. t n a w u o y u n e m e h t h c a e r e h t h g u o r h t s y e k n w o D d n a p U e h t h t i w l l o r c S e h t s s e c c A s n o i t c n u F u n e M
. y e k e h t s s e r p y l f e i r B l l a C a d n E e h t h g u o r h t s y e k n w o D d n a p U e h t h t i w l l o r c S
. s l l a c d e s s i m d n a e n o h p e h t n e p O t f o s w e i V e h t s s e r p
. y e k s s e r p
, l l a c e h t n r u t e r o T
. y e k e h t d e s s i M w e V i s l l a C l i y e t a d e m m I g n i s s i M r e t f A m e h T e h t l i t n u s n o i t p o e h t f o t s i l l
. d e t c e e s s i t n a w u o y e n o e h t h g u o r h t s y e k n w o D d n a p U e h t h t i w l l o r c S
. y e k t f o s t c e l e S e h t s s e r P e h t f o e n i l m o t t o b e h t n o
, t i e v o b a t x e t e h t y b d e t a c i d n i n o i t c n u f e h t m r o f r e p
) d n a
s y e k t f o s o w t e h t f o h c a E l
. y a p s i d 181 S t o r e P h o n e b o o k N u m b e r s i n l A e r t T y p e C h o o s e t h e l V o u m e A d j u s t t h e i V b r a t i o n i V b r a
M e l o d y M e l o d y L i g h t O n l y l S e e c t a n o p t i o n
l S e e c t a m e m o r y
. P r e s s t h e S e l e c t s o f t k e y
. P r e s s t h e S e l e c t s o f t k e y
. l S e e c t a n i c o n
. E n t e r t h e n u m b e r a n d p r e s s t h e S a v e s o f t k e y
. P r e s s t h e S e l e c t s o f t k e y
. m e n u
M e n u 5
. 3
. l S e e c t t h e A l e r t T y p e l e f t s i d e o f t h e p h o n e
. P r e s s t h e o r k e y o n t h e C a l l A n s w e r a o r P r e s s t h e k e y
. O p e n t h e p h o n e P h o n e b o o k N u m b e r i n S e a r c h f o r a
c o n t i n u e d
) S t o r e P h o n e b o o k N u m b e r s i n r e t u r n t o I d e M o d e
. l P r e s s t h e k e y t o P r e s s t h e O K s o f t k e y
. l o c a t i o n n u m b e r
. I f n e c e s s a r y
, c h a n g e t h e E n t e r t h e n a m e
. P r e s s t h e O K s o f t k e y
. D o w n k e y
. T o s c r o l l t h r o u g h t h e n a m e s
, p r e s s t h e U p o r o p t i o n
. l S e e c t t h e S e a r c h k e y
. P r e s s t h e N a m e s o f t o f t h e n a m e
. E n t e r t h e f i r s t f e w l e t t e r s o r D o w n k e y
. T o s c r o l l t h r o u g h t h e n u m b e r s
, p r e s s t h e U p P r e s s t h e V i e w s o f t k e y
. P r e s s t h e k e y t o d a l
. i 182 Declaration of Conformity (R&TTE) For the following product :
TRI BAND GSM TELEPHONE
(Product Name) SGH-E715
(Model Number) Manufactured at :
Samsung Electronics, 94-1 Imsu-Dong, Gumi City, Kyung Buk, Korea, 730-350
(factory name, address*) to which this declaration relates, is in conformity with the following standards and/or other normative documents. Safety EMC SAR Network
: EN 60950:2000
: EN 301 489-1:2000 EN 301 489-7:2000
: EN 50360:2001 OET Bulletin 65, Supplement C:2001
: EN 301 511 V7.0.1 We hereby declare the [all essential radio test suites have been carried out and that] the above named product is in conformity to all the essential requirements of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ, UK Identification mark: 168 The technical documentation kept at:
Samsung Electronics Euro QA Lab. which will be made available upon request.
(Representative in the EU) Samsung Electronics Euro QA Lab. Blackbushe Business Park, Saxony Way, Yateley, Hampshire, GU46 6GG, UK 2003. 3. 26 In-Seop Lee / S. Manager
(place and date of issue) (name and signature of authorised person)
* This is not the address of the Samsung Service Centre. For the address or the phone number of the Samsung Service Centre, see the warranty card or contact the retailer where you purchased your phone.
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2003-10-10 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2003-10-10
|
||||
| 1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0027908797
|
||||
| 1 | Physical Address |
19 Chapin Rd., Building D
|
||||
| 1 |
Pine Brook, New Jersey 07058
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
| 1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
A3L
|
||||
| 1 | Equipment Product Code |
SGHP500
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J**** C******
|
||||
| 1 | Title |
General Manager
|
||||
| 1 | Telephone Number |
973-8********
|
||||
| 1 | Fax Number |
973-8********
|
||||
| 1 |
j******@samsung.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
| 1 | Name |
R****** O******
|
||||
| 1 | Physical Address |
6660-B Dobbin Road
|
||||
| 1 |
Columbia, Maryland 21045
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
410-2********
|
||||
| 1 | Fax Number |
410-2********
|
||||
| 1 |
r******@pctestlab.com
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single-Band PCS GSM Phone | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output is EIRP. SAR compliance for body-worn operating configuration is based on a separation distance of 1.5 cm between the back of the unit and the body of the user. Belt clips or holsters may not contain metallic components. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are Head: 1.01 W/kg; Body-worn: 0.312 W/kg. This device contains 900 MHz GSM and 1800 MHz DCS functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
SAMSUNG ELECTRONICS CO., LTD.
|
||||
| 1 | Name |
N**** P********
|
||||
| 1 | Telephone Number |
82-31********
|
||||
| 1 | Fax Number |
82-31********
|
||||
| 1 |
n******@samsung.co..kr
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 1.4090000 | 2.5000000000 ppm | 250KGXW | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC