all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual 1 | Users Manual | 2.19 MiB | ||||
1 |
|
Users Manual 2 | Users Manual | 1.78 MiB | ||||
1 | Attestation Statements | |||||||
1 | RF Exposure Info | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual 1 | Users Manual | 2.19 MiB |
* Some contents of this manual may differ from your phone depending upon the software of the phone or your service provider. CELLULAR PHONE SCH-A633 Users Manual ELECTRONICS Draft version
(2003/05/14) All phone functions couldnt be checked because the software of the current working sample was unstable. The descriptions in this manual were borrowed from the other manuals. The functions will be checked and, therefore, the contents will be corrected in the next version. World Wide Web http://www.samsungmobile.com Printed in Korea Cdigo No.: GH68-XXXXXA English. 05/2003.Rev.1.0 Please read this manual before operating your phone, and keep it for future reference. FCC RF EXPOSURE INFORMATION Table of Contents In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied antenna or one that is approved. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in a violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain at least a 0.59 inch (1.5 cm.) separation distance, between the user's body and the back of the phone, including the antenna, whether extended or retracted. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Vehicle Mounted External Antenna (optional, if available.) A minimum separation distance of 7.9 inches (20cm) must be maintained between a person and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC web site at www.fcc.gov Important Safety Precautions .................................................. 7 Unpacking ................................................................................... 9 Your Phone Phones Parts ................................................................................ 10 Display ......................................................................................... 13 Backlight ...................................................................................... 15 Camera ........................................................................................ 15 Getting Started Using a Battery ............................................................................. 17 Switching the Phone On or Off ....................................................... 20 Using the Soft Keys ........................................................................ 22 Your Phones Modes ...................................................................... 23 Call Functions Making a Call ................................................................................ 26 Emergency Dialling ....................................................................... 27 Redialing the Last Number ............................................................ 28 Making a Call from Phonebook ..................................................... 28 Prepend Dialling ........................................................................... 29 Speed-dialling ............................................................................... 29 Four-digit Dialling ......................................................................... 31 Pause Dialling .............................................................................. 32 Voice Dialling ................................................................................ 34 Adjusting the Volume During a Call ............................................... 36 Answering a Call ............................................................................ 36 Options During a Call ..................................................................... 37 Using Caller ID .............................................................................. 38 Viewing Missed Calls ...................................................................... 38 Call Forwarding ............................................................................. 39 Call Waiting ................................................................................... 39 Three-way Calling .......................................................................... 40 3 Entering Text Changing the Text Input Mode ........................................................ 42 Using the T9 (English) Mode .......................................................... 43 Using the Alphabet Mode ............................................................... 45 Using the Symbol Mode ................................................................. 47 Using the Number Mode ................................................................ 47 Using the Menus Accessing a Menu Function by Scrolling .......................................... 48 Accessing a Menu Function by Using Its Shortcut ...............................49 List of Menu Functions ................................................................... 50 Phone Book Find (Menu 1-1) ........................................................................ 53 Add Entry (Menu 1-2) ............................................................... 55
................................................................... 59 Groups (Menu 1-3) Memory Status (Menu 1-4)......................................................... 60 Messages Write (Menu 2-1) ....................................................................... 61 Inbox (Menu 2-2)....................................................................... 64 Outbox (Menu 2-3) .................................................................... 65 Saved (Menu 2-4) ...................................................................... 66 Templates (Menu 2-5)................................................................. 67 Erase Messages (Menu 2-6) ........................................................ 67 Settings (Menu 2-7).................................................................... 68 Voice Mail (Menu 2-8) ................................................................ 70 Call History Missed (Menu 3-1) ..................................................................... 71 Received (Menu 3-2) ................................................................. 72 Dialled (Menu 3-3) .................................................................... 73 Erase History (Menu 3-4)............................................................ 73 Call Duration (Menu 3-5)............................................................ 74 Sounds Ringer Tones (Menu 4-1) ........................................................... 75 Ringer Volume (Menu 4-2) ........................................................ 76 Alerts (Menu 4-3) ..................................................................... 77 Key Tone (Menu 4-4) ................................................................ 78 Power On/Off Melody (Menu 4-5) .............................................. 78 Display Language (Menu 5-1) ............................................................... 79 Service Area (Menu 5-2) ........................................................... 79 Menu Theme (Menu 5-3) .......................................................... 79 Wallpaper (Menu 5-4) ............................................................... 80 Banner (Menu 5-5) .................................................................... 81
................................................................ 82 Backlight (Menu 5-6)
........................................................ 82 Set Dual Clock (Menu 5-7) Service LED (Menu 5-8) ............................................................. 83 Voice Tools Voice Dial (Menu 6-1) ............................................................... 84 Voice Memo (Menu 6-2) ............................................................ 87 Answer Machine (Menu 6-3) ....................................................... 89 Organiser Scheduler (Menu 7-1) ................................................................ 92 Task List (Menu 7-2) ................................................................. 95 Memo Pad (Menu 7-3) .............................................................. 97 Alarm (Menu 7-4) ..................................................................... 98 Calculator (Menu 7-5) ............................................................... 99 World Time (Menu 7-6) ........................................................... 100 Count Down (Menu 7-7) .......................................................... 100 Settings Call (Menu 8-1) ....................................................................... 102 Phone/System (Menu 8-2) ...................................................... 105 Security (Menu 8-3) ............................................................... 106 4 5 R World R-Menu (Menu 9-1).................................................................. 110 Multimedia (Menu 9-2).............................................................. 115 Games (Menu 9-3) .................................................................... 116 Reset R-Menu (Menu 9-4)........................................................ 1167 Photos Camera (Menu 0-1) ................................................................ 118 Photo Album (Menu 0-2) ......................................................... 122 Photo Wallet (Menu 0-3) ......................................................... 123 Settings (Menu 0-4) ................................................................ 125 Health and Safety Information Precautions When Using Batteries ................................................. 126 Road Safety ................................................................................. 128 Operating Environment................................................................. 130 Electronic Devices ........................................................................ 131 Potentially Explosive Environments................................................ 133 Emergency Calls ........................................................................... 134 Other Important Safety Information .............................................. 135 Care and Maintenance .................................................................. 136 Glossary ...................................................................... 138 Index............................................................................ 141 Quick Reference Card.................................................... 145 Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch your phone off near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger
(in a hospital for example). 6 7 IImmppoorrttaanntt SSaaffeettyy PPrreeccaauuttiioonnss Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Emergency Call Ensure the phone is switched on and in service. Key in the emergency number for your present location, then press the any unnecessary features before you can make an emergency call. Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so. key. You must deactivate Water Resistance Your phone is not water-resistance. Keep it dry. Accessories and Batteries Use only Samsung-approved accessories and batteries. Use of unauthorised accessories could damage your phone and may be dangerous. Qualified Service Only qualified service personnel may install or repair your phone. For more detailed safety information, see Health and Safety Information on page xx. Unpacking Your package contains the following items:
Handset Battery Travel Adapter Hand Strap Users Manual Ear-microphone In addition, you can obtain the following accessories for your phone from your local Samsung dealer:
Ear-microphone Travel adapter Standard batteries Cigarette lighter adapter Hands-free car kit Data cable 8 9 Your Phone Phones Parts The following illustrations shows the main elements of your phone:
Open View Closed View Camera module YYoouurr PPhhoonnee Antenna External display Folder Camera module Ear-microphone jack Volume keys During a call, adjust the voice volume. In Standby Mode with the folder open, adjust the key tone volume. In Menu Mode, scroll through the menu options. 10 Earpiece Main display Microphone Key(s) Functions Perform the functions indicated by the text above them, on the bottom line of the display.
(soft keys)
(Navigation keys) In Menu Mode, scrolls through the menu options and Phonebook memory. In Standby Mode, accesses the following menus:
Up: Messages Down: Voice Memo Left: Scheduler (All) Right: Ringer Tones Quickly launches R-World. Makes or answers a call. In Standby Mode, retrieves the last numbers you dialled or received. Redials the number of the last call when pressed twice. 11 YYoouurr PPhhoonnee YYoouurr PPhhoonnee Key(s) Functions (continued) Deletes characters from the display. In Menu Mode, returns to the previous menu level. Quickly enters the Photos menu. Turns the camera on when held down. In the capture mode, works as a camera shutter. Ends a call. Also switches the phone on and off when held down. In Menu Mode, cancels your input and returns to Standby Mode. Display Layout The display has three areas; an upper line of various icons, the lower text and graphic area and the last line containing the soft key indicators. Icons Text and graphic area Soft key indicators Menu Find
Enters numbers, letters and some special characters. Icons In Standby Mode, initiates the voice dialling feature when held down. While entering text, allows you to change the case. Also, use this key for the special star calling feature. In Standby Mode, enters or exits the silent mode when held down. Also, use this key when you make a call to an automated system, especially when using teleservices. Signal Strength : Shows the received signal strength. The greater the number of bars, the better the signal. Service: Appears when a call is in progress. No Service: Appears when you are outside a service area. When it appears, you cannot make or receive calls. New Message: Appears when a new message is received. 12 13 YYoouurr PPhhoonnee YYoouurr PPhhoonnee Alarm: Appears when you set an alarm to ring at a specified time. Roaming: Appears when you are out of your home area and have logged onto a different network, when travelling in other countries, for example. Ringer On: Appears when you set the ringer volume for calls to one from Level 1 to Level 8 or to 1-Beep. Ringer Off: Appears when the ringer volume is turned off. Vibration: Appears when you set the ringer volume for calls to Vibrate or High+Vib or when the phone is in the vibrate mode. Digital Mode: Indicates when the phone is logged onto a digital network. Analogue Mode: Indicates when the phone is logged onto an analogue network. 1x Mode: Indicates when the phone is in the 1x mode. Battery Status: Shows the level of your battery. The more bars you see, the more power you have left. 14 External Display Your phone has an external display on the folder. When the folder is closed, it indicates that you have an incoming call or message. It also alerts you when you have set an alarm at the specified time by turning its backlight on and displaying the corresponding icon. Backlight The display and the keypad are illuminated by a backlight. When you press any key or open the folder, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Backlight option set in the Display menu. To specify the length of time for which the backlight is active, set the Backlight menu (Menu 5-6); see page xx for further details. Note: In Standby Mode or Talk Mode, the display automatically turns off after some time, depending on your setting in the Backlight menu to conserve your battery power. Press any key to turn the display on. Camera The camera module on the top left of your phone allows you to take a picture while on the move. For further details about the Camera feature, see page xx. 15 Getting Started Using a Battery Your Samsung phone comes packaged with a partially charged, rechargeable Lithium Ion (Li-ion) battery. Installing the battery 1. Place the battery back on the phone so that its tabs match the slots on the phone. GGeettttiinngg SSttaarrtteedd Removing the battery 1. If necessary, switch off the phone by holding down the key until the power-off image displays. 2. To remove the battery:
Pull the catch above the battery toward the top of the phone and hold it in that position. Lift the battery away, as shown. 2. Press the battery down until it snaps into place. Make sure that the battery is correctly installed before switching on the phone. Charging the Battery The travel adapter is provided with your phone to allow you to charge your phones battery from a standard AC wall outlet. Use only approved batteries and chargers. Note: You need to fully charge the battery before using your phone for the first time. You can use your phone while the battery is charging, but this increases time it will take to charge the battery. An empty standard battery can be fully charged in approximately 4 hours. 16 17 GGeettttiinngg SSttaarrtteedd To charge the battery:
1. With the battery in position on the phone, plug the connector form the travel adapter into the jack at the bottom of the phone. 2. Plug the adapter into a standard wall outlet. The battery begins charging immediately. 3. When charging is finished, unplug the adapter from both the power outlet and the phone by pressing the grey tabs on both sides of the connector (see ) and pulling the connector out (see ). Note: You must unplug the adapter before removing the battery from the phone during charging;
otherwise, the phone could be damaged. 18 GGeettttiinngg SSttaarrtteedd Low Battery Indicator You can easily tell if your battery needs to be recharged by checking the Battery Status icon (
the upper-right corner of your phones display. The presence of all three bars indicates a full charge, two bars indicates a smaller charge, and one bar indicates an even smaller charge.
) at When the battery charge level becomes low, the battery sensor blinks an empty Battery Status icon
) and sounds a warning tone. If the battery level gets too low, the phone automatically turns off. When this happens, you lose whatever you are doing and your phone call cuts off. Watch the Battery Status icon and make sure that your battery is adequately charged. Battery Talk Time and Standby time Battery times can vary depending on operating conditions, usage, signal strength and backlight setting. Talk time usage will decrease standby time. Talk time: xx hours Standby time : xx hours 19 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd WARNING!
Do not switch the phone on when mobile phone use is prohibited or when it may cause interference or danger. Note: As with any other radio-transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects the call quality and may cause the phone to operate at a higher power level than otherwise needed. Switching the Phone On or Off 1. Press and hold the key until the power-on image displays to switch the phone on. The service light on the phone flashes and an alert sounds. When the system locates services, the greeting message displays along with the date and time. You can now place and receive calls. i o n O n l y P o s i t Service Provider The 13 May 10:30 If the phone is out of service, the No Service icon
cannot make and receive calls. You can try again later when service is available.
) appears on the display. In this case, you Menu Find Note: You can change the display language. To change the language, use the Language menu (Menu 5-1). For further details, see page xx. 2. When you wish to switch the phone off, hold down the key more than two seconds. 20 21 GGeettttiinngg SSttaarrtteedd Using the Soft Keys Your phone offers a set of functions that allow you to customize your phone. These functions are arranged in menus and sub-menus, accessed using the two soft keys marked and . Each menu and sub-menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the function you are currently using; the label on the bottom line of the display just above each key indicates its current role. Example:
i o n O n l y P o s i t Service Provider The 13 May 10:30 Menu Find GGeettttiinngg SSttaarrtteedd Your Phones Modes Standby Mode Standby is the most basic state of your phone. The phone goes into Standby Mode after you turn it on or whenever you briefly press the key. When your phone is in Standby Mode, you will typically see the greeting message and the current date and time. If you enter a phone number, you can press the dial it or press the Save soft key to save it in the internal Phonebook. key to key at any time to return to Standby Press the Mode. Be careful; if you are on a call when you press the returns to Standby Mode. key, the call disconnects and the phone Talk Mode You can place and answer calls only when your phone is turned on. During a call, the phone is in the talk mode. While you are in the talk mode, pressing the Options soft key gives you a list of options. See page xx for details. Press the left soft key to access Menu Mode. Press the right soft key to find a number in your Phonebook 22 23 GGeettttiinngg SSttaarrtteedd Vibrate Mode Vibrate Mode disables all sounds on the phone. This feature is best used in situations where the phone might disturb others, such as in a meeting, at a library or in a theater. Your phone can be set to the vibrate mode with a press of a key in Standby Mode. To enter the silent mode, press and hold the until Change to Vibrate Mode and the Vibration icon
) appear. key To exit and reactivate the previous sound settings, press and hold the appears. The Vibration icon no longer displays. key until Cancel Vibrate mode GGeettttiinngg SSttaarrtteedd Power Save Mode Your phone comes with a Power Save feature that automatically turns off the display when you dont use the phone. While this feature is active, the phones battery charge is conserved. The display switches off if no key is pressed within one minute after the backlight turns off. You can press any key to activate the display. phone to recheck for a signal, press any key. Lock Mode When you lock your phone using the Lock Phone menu (Menu 8-3-1) in the Settings menu, you cannot use the phone. In the lock mode, you can receive messages and calls, but you cannot place an outgoing call until you unlock the phone. To unlock the phone, you need to enter the lock code. For details about locking and unlocking your phone, see page xx. 24 25 Call Functions Making a Call In Standby Mode, enter the area code and phone number and press the key. Note: If the Auto Redial menu (Menu 8-1-1) have been enabled, the phone automatically retries to make the call when the line is busy or the remote person does not answer. See page xx. While entering a number, press the Options soft key to use the following options:
Call: places a call to the number. Save: allows you to save the number in Phonebook. Find: allows you to find a number from Phonebook. Hard Pause: enters a hard pause. Notes:
When you enter a number corresponding to a Phonebook location, the Speed Dial option is available. For details about speed dialling, see page xx. When you enter four digits, the 4-digit Dial option is available. For details about four-digit dialling, see page xx. CCaallll FFuunnccttiioonnss Correcting the Number To clear the last digit displayed whole display Press CLR key. CLR key for more than one second. Ending a Call When you want to finish your call, briefly press the key or close the folder. If you end the call by pressing the key, the call time, or the length of the call, displays briefly and the phone returns to Standby Mode. Emergency Dialling You can place emergency calls from your emergency number list even if your phone is locked. For more information about emergency numbers, see page xx. 26 27 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Redialling the Last Number Prepend Dialling To redial the last call you made or received, press the key twice quickly. Your phone stores the ten numbers each of the last missed, received and dialled calls. To recall any of these numbers:
The prepend option lets you add digits, such as area codes and network feature activation codes, to a phone number that is in your Phonebook. To prepend a phone number stored in your phone:
1. Press the Find soft key to access the Phonebook 1. In Standby Mode, press the outgoing calls displays. key. The list of the entries. 2. Press the Left or Right key to scroll to the call type you want. Note: When a list is empty, the next available list displays. 2. Press the Up or Down key to scroll to the number you want and press the Select soft key. 3. Press the Options soft key to access the options. 4. Press the 3 key to select the Prepend option. 3. Press the Up or Down key until you find the required 5. Enter the area code or feature code. name or number. 4. Press the key to dial the number displayed. 6. Press the number. key or the Call soft key to dial the Making a Call from Phonebook Speed-dialling You can store the phone numbers called regularly in the memory, which is called Phonebook. You then simply recall the number to dial. For further information about the Phonebook feature, see page xx. Once you have stored phone numbers in the Phonebook memory, you can dial them easily whenever you want. Note: When several numbers are saved in one name entry, the first number you entered is automatically specified as a speed dial number. To change the speed dial number, use Speed dial of the Phonebook options; see page xx. 28 29 CCaallll FFuunnccttiioonnss One-Touch Dial Memory locations 001 through 009 are special one-
touch locations. You can dial the phone numbers stored in the Phonebook memory from 001 through 009 simply by pressing one key. Press and hold the third digit of the memory location containing the number to be dialled. For example: Location no. 009 Press the 9 key and hold. The number (and name) stored is displayed, and then dialled. Two-Touch Dial Memory locations 010 through 099 are special two-
touch locations. Press the second digit briefly, and then hold down the third digit of the memory location. For example: Location no. 023 Press the 2 key briefly and hold down the 3 key. The number (and name) stored is displayed, and then dialled. CCaallll FFuunnccttiioonnss Three-Touch Dial Memory locations 100 through 250 are special three-
touch locations. Press the first two digits briefly, and then hold down the third digit of the memory location. For example: Location no. 123 Press the 1 key and the 2 key briefly, then hold down the 3 key. The number (and name) stored is displayed, and then dialled. Four-digit Dialling You can quickly dial a phone number in Phonebook by entering its last four consecutive digits. This feature is convenient if you have the number memorised, but you have forgotten where the number is stored in your Phonebook. 1. Enter the last four digits of the phone number you want to dial. 2. Press the Options soft key and select the 4-digit Dial option. The phone displays the phone number matching the four digits. If the phone found more than one number that contains those four digits, it displays the first number. Scroll through the number using the Left or Right key to select a number. 3. Press the key or the Call soft key to dial it. 30 31 CCaallll FFuunnccttiioonnss Pause Dialling When you call an automated system, like banking services, you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Phonebook, separated by special characters which are called pauses. Note: Multiple two-second pauses can be entered to extend the length of a pause. For example, two consecutive pauses cause a total pause time of two seconds. However, keep in mind that pauses count as digits towards the 32 digit dialling maximum. Storing Pauses in a Phonebook Entry To store a number in your Phonebook that contains pauses:
1. Enter the phone number you want to store, such as the banks teleservice phone number. 2. Press the Options soft key to access the options. 3. Press the 4 key for Hard Pause. The letter P displays, meaning that a hard pause will occur at that point in the dialling sequence. 4. Enter the digits that need to follow the pause, such as your account number. 5. Repeat steps 2 through 4 to add more pauses and numbers, if necessary. CCaallll FFuunnccttiioonnss 6. Store the number in your Phonebook as you normally would by pressing the Save soft key and following from step 2 on page xx. Pause Dialling from a Stored Phonebook Entry 1. Dial the number of the service from Phonebook. 2. Wait for the appropriate prompt from the system you are calling. 3. When prompted, press the key to send the DTMF (Dual tone multi-frequency) number that follows your pause. SENDING DTMF flashes on the display and the transmitted tone sounds. 4. Repeat from step 2, if necessary. Manual Pause Dialling You can enter pauses manually during the dialling process. 1. Enter the phone number of the service you want to call, such as a banks teleservice phone number. 2. Press the Options soft key to access the options. 3. Press the 4 key for Hard Pause. The letter P displays, meaning that a hard pause will occur at that point in the dialling sequence. 32 33 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss 4. Enter the number to be sent after the pause, such as credit card number or bank account number, and then press the key to dial the first number. 5. To transmit the additional number after connecting, press the pause. key again at the prompt for the SENDING DTMF flashes on the display and the transmitted tone sounds. Voice Dialling Before using the voice dialling feature, you must record names and numbers in your phone using the Voice Dial menu (Menu 6-1). For further details, see page xx. 1. To place a call, press and hold the key or open the folder, depending on the Activate By menu
(Menu 6-1-4). See page xx. Adjusting the Volume During a Call During a call, if you want to adjust the voice volume, use the Volume keys on the left side of the phone. Press the key to increase the volume level and the key to decrease the level. You can also adjust the keypad tone volume using these keys in Standby Mode. 2. At a voice prompt, say a name into the microphone. If the phone recognises the name, the phone attempts a connection. If the phone does not recognise the name, the phone sounds an alert and prompts for the name again . 3. The phone dials the corresponding number. 34 35 CCaallll FFuunnccttiioonnss Answering a Call When somebody calls you, the phone rings and displays the incoming call animation. If the caller can be identified, the callers phone number, or name if available in your Phonebook, displays. 1. To answer a call, press the key. If the Answer Mode menu (Menu 8-1-2) is set to Any Key, you can answer a call by pressing any key except for the key. When the menu is set to Folder Open, you can simply open the folder to answer the call. For details about the Answer Mode menu, see page xx. 2. To end the call, press the the folder. key or simply close Notes:
You can answer a call while using Phonebook or menu functions. The current operation stops. If you cannot answer incoming calls, you can set the phone to answer the call by playing a greeting message and record callers messages. For further details, see page xx. CCaallll FFuunnccttiioonnss Options During a Call Your phone provides you with a number of functions that you can use during a call. Press the Options soft key during a call to access the following options:
Phone Book: allows you to access the Phone Book menu. For details, see page xx. Mute/Quit: allows you to switch your phones microphone off, so that the other person cannot hear you. Example: You wish to say something to another person in the room but do not want the other person to hear you. Silent/Quit: does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call. Calls: allows you to access the Call History menu. For details, see page xx. Messages: allows you to use the Message feature. For details, see page xx. Organiser: allows you to access the Organiser menu. For details, see page xx. C a n n o t b e c h e c k e d w i p h o n e ! !
r e n t c u r t h e t h 36 37 CCaallll FFuunnccttiioonnss Using Caller ID This feature tells you who is calling you by displaying the callers number when the phone rings. If the name and number are stored in your Phonebook, the corresponding name also displays. If you call someone who has this feature, your phone number displays on her/his phone. Note: Contact Reliance to set up the Caller Line Identification service. Viewing Missed Calls If you fail to answer a call for any reason, the phone indicates the missed call by displaying a text notification on the screen. Additionally, if caller information is available, a missed entry is created. Press the press the Standby Mode. key to access the missed call list, or key to clear the message and return to To view missed calls, access the Missed menu
(Menu 3-1) on page xx. C a n n o t b e c h e c k e d w i p h o n e ! !
r e n t c u r t h e t h 38 CCaallll FFuunnccttiioonnss Call Forwarding When the Call Forwarding menu (Menu 8-1-3) is enabled, your phone forwards incoming calls to another phone number, even if your phone turns off. Activating Call Forwarding does not affect outgoing calls made from this phone. For further details for activating Call Forwarding, see page xx. Call Waiting C a n n o t t h e t h b e c h e c k e d w i p h o n e ! !
r e n t c u r You can answer an incoming call while you have a call in progress, when the Call Waiting menu (Menu 8-1-4) is enabled. See page xx for further details. When a waiting call is detected, the incoming call alert sounds, depending on your network, and a text notification displays. To answer a waiting call during a call:
1. When you hear a beep telling that you have a waiting call, press the the calling person and places the current call on hold. key. The phone connects 2. Press the key again to switch between the two calls. Note: If you do not respond to a Call Waiting notification, the phone will forward the call to voice mail server or another number that you have set up. Contact Reliance for more information. 39 CCaallll FFuunnccttiioonnss Three-way Calling This feature enables you to conduct conference calls with two separate persons at the same time. The phone records each participant into the Outgoing Calls Log. Also, You are billed call time for each outgoing call separately. Note: Contact Reliance to activate Three-way Calling. To place a Three-way call:
1. During a conversation, press the places the other person on hold. key. The phone 2. Enter the phone number for the third person, and key. The phone dials the third then press the person. 3. When you are connected to the person, press the key again to begin your three-way call. If one of the callers (not you) hangs up, you and remaining caller stay connected. If you initiated the call and you hang up first, all three participants are disconnected. C a n n o t b e c h e c k e d w i p h o n e ! !
r e n t c u r t h e t h Entering Text At many times when using your phone, you will need to enter text; for example, when storing a name in Phonebook, creating your personal greeting or scheduling events on your calendar. You can enter alphanumeric characters into your phone using your phones keypad. Your phone has the following text input modes:
T9(English): This mode allows you to enter words with only one key press per letter. Each key on a keypad has more than one letter - a single press on the 5 key could be J,K or L. The T9 mode automatically compares your key presses to an internal linguistic database to determine the correct word. The T9 mode requires far fewer keystrokes than the traditional multi-tap method, alphabet mode. Alphabet: This mode allows you to enter letters by pressing the key labeled with the letter you want to enter once, twice, or three times until it appears on the display. Symbol: This mode allows you to enter special characters. Number: This mode allows you to enter numbers. Note: The T9 mode supplies an appropriate language database as your language setting menu (Menu 5-1). 40 41 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Changing the Text Input Mode Using the T9 (English) Mode When you are in a field that allows characters entry, you should notice the text input mode indicator on the display. Example: Entering a name for a Phonebook entry Text input mode indicator i o n O n l y P o s i t To change to another text input mode:
1. Press the Options soft key. i o n O n l y P o s i t 2. Scroll to the mode by pressing the Up or Down key. 3. To select the highlighted mode, press the Select soft key. If you want to exit the menu without changing to a new mode, press the CLR key. The selected text input mode indicator appears on the display. 42 To type a word, press keys corresponding to the letters you need. Remember the following as you are typing:
1. Press alphanumeric keys on the keypad just once per letter. For example, to enter Hello, press the 4, 3, 5, 5 and 6 keys. The word you are typing appears on the display. It may change with each key press. 2. Type to the end of the word before editing or deleting any keystrokes. 3. Put a space between words by pressing the key. If the word that appears on the display is not the word that you desire, press the 0 key one or more times to display alternative word choices for the keys you have typed. For example, both of and me have the sequence of the 6 key and 3 key. The phone displays the most commonly used choice first. 4. Continue entering the next word. Smart Punctuation You can enter periods, hyphens, and apostrophes by pressing the 1 key. The T9 mode applies rules of grammar to insert the correct punctuation. Notice that the 1 key is used twice in this example to display two punctuation marks:
L e t s e a t . 43 EEnntteerriinngg TTeexxtt Including a Number You can include a number between letters without exiting the T9 input mode. Press and hold the corresponding number key. Changing the Case Your phone offers three cases:
T9: initial letter is capitalised. T9: all letters are capitalised. t9: all letters are lower-cased. Press the key one or more times to display the appropriate case indicator on the top right of the display and begin typing normally. Other Usages Press the key to insert a space. To move the cursor to the left or right through your text, press the Left or Right key. Press the CLR key one or more times to delete the letters one by one to the left. Press and hold the CLR key to clear the display. 44 EEnntteerriinngg TTeexxtt Using the Alphabet Mode When typing in the alphabet mode, you need to press the keys labeled with the required letter:
- once for the first letter
- twice for the second letter
- and so on. This method is called multi-tap typing. For example, you press the 2 key three times to display the letter C and the 5 key two times to display the letter K. The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to move to the right automatically, and then enter the next letter. Refer to the table below for the list of characters assigned on each key. Key Characters in the Order Displayed
. , - ? ! @ : 1 A B D E G H J K M N Q P T U W X 0
(Caps Lock mode) C F I L O R V Y 2 3 4 5 6 S 8 Z 9 7 45 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Changing the Case Your phone offers three cases:
Ab: initial letter is capitalised. AB: all letters are capitalised. ab: all letters are lower-cased. Press the appropriate case indicator, and begin typing normally. key one or more times to display the Other Usages Press the key to insert a space. To move the cursor to the left or right through your text, press the Left or Right key. Press the CLR key one or more times to delete the letters one by one to the left. Press and hold the CLR key to clear the display. Using the Symbol Mode The symbol mode enables you to enter symbols. i o n O n l y P o s i t You can display more symbols by pressing the Left or Right key. Press the number key corresponding to the symbol you want to enter. The phone automatically switches back to the text entry mode used just prior to selecting the symbol mode. Using the Number Mode The number mode enables you to enter numbers. Press the keys corresponding to the digits you want to enter and manually switch back to the text entry mode of choice. For details about changing the mode, see page xx. 46 47 Using the Menus Your phone offers a range of functions that allow you to tailor it to your needs. These functions are arranged in menus and submenus. The menus and submenus can be accessed by scrolling or by using the shortcuts. Accessing a Menu Function by Scrolling 1. In Standby Mode, press the Menu soft key to access Menu Mode. 2. Scroll with the Navigation keys to reach the desired main menu; for example, Display. Press the Select soft key to enter the menu. 3. If the menu contains any submenus; for example, Language, find the one you want by scrolling with the Up or Down key. Press the Select soft key to enter the submenu. If the menu you have selected contains submenus, repeat this step. 4. Scroll with the Up or Down key to find the setting of your choice. 5. Press the OK or Save soft key to confirm the chosen setting. UUssiinngg tthhee MMeennuuss Notes:
You can return to the previous menu level by pressing the CLR key or the Back soft key. You can exit the menu without changing the menu settings by pressing the key. Accessing a Menu Function by Using Its Shortcut Menu, submenus and setting options are numbered and can be quickly accessed by using their shortcut numbers. Note: The numbers assigned to each menu function are indicated on the list on page xx. 1. In Standby Mode, press the Menu soft key to access Menu Mode. 2. Within three seconds, enter the first digit of the shortcut number. Repeat this for each digit of the shortcut number. Example: Accessing the Language menu Press the 5 and the 1 keys. 5 selects Display and 1 selects Language. 3. Find the setting of your choice by pressing the Up or Down key. 4. Press the OK or Save soft key to confirm the chosen setting. 48 49 UUssiinngg tthhee MMeennuuss List of Menu Functions UUssiinngg tthhee MMeennuuss Main menu 1 1. Find 2. Add Entry 3. Groups 4. Memory Status 1. Write 2. Inbox 3. Outbox 4. Saved 5. Templates 6. Erase Msgs 7. Settings 8. Voice Mail 1. Missed 2. Received 3. Dialled 4. Erase History 5. Call Duration Main menu 2 1. Add Number 2. Add Email 3. Add URL 1. Inbox 2. Outbox 3. Saved 4. All Messages 5. Voice Mail 1. Auto Scroll 2. Msg Reminder 3. New Msg 4. Msg Color Setup 1. Missed 2. Received 3. Dialled 4. All 1. Last Call 2. Total Dialled Call 3. Total Received Call 4. Reset All 5. Life Time Main menu 1. Phone Book 2. Messages 3. Call History 50 Main menu 2 1. Calls 2. Messages 3. Schedules 1. Calls 2. Messages 3. Alarm
/Schedules 1. Service 2. Call Connect 3. Call Disconnect 4. Folder Open
/Closed 1. Volume 2. Type 3. Length Main menu 4. Sound 5. Display Main menu 1 1. Ringer Tones 2. Ringer Volume 3. Alerts 4.Key Tone 5. Power On/Off Melody 1. Language 2. Service Area 3. Menu Theme 4. Wallpaper 5. Banner 6. Backlight 7. Set Dual Clock 8. Service LED 6. Voice Tools 1. Voice Dial 2. Voice Memo 3. Answer Machine 1. Record 2. Review 3. Erase All 4. Activate By 1. Record 2. Review 3. Erase All 1. On/Off 2. Voice Messages 3. Settings 51 UUssiinngg tthhee MMeennuuss Main menu 7. Organiser Main menu 1 Main menu 2 1. Today 2. All 1. Scheduler 2. Task List 3. Memo Pad 4. Alarm 5. Calculator 6. World Time 7. Count Down 1. Auto Redial 2. Answer Mode 3. Call Forwarding 4. Call Waiting 1. Set time 2. Set NAM 3. Version 1. Lock Mode 2. Change Code 3. Emergency Numbers 4. Voice Privacy 5. Clear Phone Book 6. Reset Phone 1. Show List 2. Erase List 1. Push Push 2. X-Flighter 3. Space War 1. Security 2. Camera Settings 8. Settings 1. Call 2. Phone/System 3. Security 1. R-Menu 2. Multimedia 3. Games 4. Reset R-Menu 1. Camera 2. Photo Album 3. Photo Wallet 4. Settings 9. R World 0. Photos 52 Phone Book Phonebook allows you to store frequently used phone numbers and the associated names in your personal directory to make it easy for you to make a call without having to remember or enter the phone number. You can store up to 250 entries including e-mail and URL addresses. Find Menu 1-1 This option allows you to find an entry in your Phonebook. Note: You can access this menu by pressing the Find soft key in Standby Mode. 1. Press the Left or Right key to scroll to the method you want to use. By Name: Enter the first few letters of the name you want using the alphabet mode. The Phonebook entries are listed starting with the first entry matching your input. By Entry: Enter the location number of the number your want to find, using the numeric keys. By Group: Press the Down key and select the group containing the entry you want to find, using the Left or Right key. The phone lists all of the entries in the selected group. 53 PPhhoonnee BBooookk 2. If necessary, press the Up or Down key to scroll through the entries. 3. When the entry you want highlights, press the Select soft key to access the entry. The phone shows the details about the name. 4. To place a call to selected number use the options Press the key or the Call soft key. Options soft key. For details about the options, see below. When you press the Options soft key in the details display, the following options are available:
Call: places a call to the number. Edit: allows you to change the phone number, name, location number, label and so on. Prepend: allows you to add digits, such as area codes, ahead of the selected number before dialing. See page xx for details. Erase: erases the selected entry. Add Entry PPhhoonnee BBooookk Menu 1-2 This menu allows you to store a number with a name in your Phonebook. You can save a persons numbers, such as workplace number, mobile number and fax number, into one entry. A Phonebook entry can contain up to six numbers, one in each category. Add Number (Menu 1-2-1) 1. Enter a phone number and press the Save soft key. 2. Press the Select soft key to confirm to add a new entry. If you are creating an entry for the first time, skip to step 3. 3. Enter a name and press the Next soft key. For further details about entering characters, see page xx. 4. Select an icon to identify the category of the number to be stored using the Navigation keys and press the Select soft key. 5. To select an option, scroll to it by pressing the Up or Down key. The following options are available:
Enter Name: allows you to enter a name, if you didnt in step 3. For further details about how to enter text, see page xx. Entry: The first available location displays. If necessary, enter the location number using the number keys. 54 55 PPhhoonnee BBooookk PPhhoonnee BBooookk Home/Office/Mobile/Pager/Fax/No label:
allows you to store more numbers for each category. Speed dial: allows you to select one of the stored numbers for speed dialling. E-mail: allows you to store an e-mail address. URL: allows you to store a URL address. Group: allows you to assign an entry to a caller group. To remove the entry from a group, select No Group. Name Ringer: allows you to select the unique ringer to be used for alerting you to an incoming call from the person. Birthday: allows you to save the date of the persons birthday. Secret: allows you to prevent a number from being displayed when it is accessed or dialled by unauthorised users. When this option is set to ON, only people with your phones lock code can view the secret number. Image: allows you to select an image to be displayed for alerting you to an incoming call from the person. 6. Press the Edit soft key to enter information or use the Left or Right key to change the setting. 7. When you finish setting the options, press the Save soft key to store the entry. After storing, the phone displays the Phonebook entry number that you just saved and the remaining slots you can further store phone numbers. Add Email (Menu 1-2-2) Using this menu, you can save an e-mail address. 1. Enter an e-mail address and press the Next soft key. For further details about entering characters, see page xx. 2. Enter a name and press the Next soft key. 3. To complete storing the e-mail address, follow the procedure from step 5 in Add Number on page xx. Add URL (Menu 1-2-3) Using this menu, you can save a URL address. 1. Enter an URL address and press the Next soft key. For further details about entering characters, see page xx. 2. Enter a name and press the Next soft key. 3. To complete storing the URL address, follow the procedure from step 5 in Add Number on page xx. 56 57 PPhhoonneebbooookk Storing Phone Numbers at Calls End Groups PPhhoonnee BBooookk Menu 1-3 To store a phone number at the end of your call:
1. Press the key to end the call. The call time and the phone number display. 2. To store the phone number, press the Save soft key. 3. To complete storing the number, follow the procedure from step 2 in Add Number on page xx. Adding a Number into an Existing Entry 1. Enter a number and press the Save soft key. 2. Scroll to the entry where you want to add a number by pressing the Up or Down key. Press the Select soft key. 3. To complete storing the number, follow the procedure from step 4 in Add Number on page xx. This option allows you to change the settings for the caller groups. To change a ringer melody indicated when a call comes in from a member of a group:
1. Press the Up or Down key to scroll to the group you want to edit. 2. Press the Ringer soft key. 3. Select the ringer category you want by pressing the Left or Right key and press the Down key. 4. Select the ringer melody you want by pressing the Up or Down key. 5. Press the Save soft key. To change the name of a caller group:
1. Press the Up or Down key to scroll to the group you want to edit. 2. Press the Edit soft key. 3. Press the CLR key to clear the current group name. 4. Enter a new name and press the Save soft key. For further details about entering characters, see page xx. 58 59 PPhhoonnee BBooookk Memory Status Menu 1-4 This option shows you how many Phonebook locations are used or empty. After displaying, the phone automatically goes back to the previous menu level. Messages Your phone can receive voicemail notification, text messages and pages. It also can send text messages and pages if Reliance provides this service. When the phone receives a message, an alert sounds, a text notification displays along with the name and phone number of the caller if available. The New Message icon (
read the new text messages, or you listen to the new voice mail messages.
) remains on the screen until you Messages are received even when your phone is in the lock mode. However, the screen does not display information about the message. To access a message, you must unlock the phone. If you receive an incoming message during a conversation, your phone automatically mutes the ringer. This is to avoid ringing in your ear while you are trying to converse. You can quickly enter the Messages menu by pressing the Up key in Standby Mode. Write Menu 2-1 You can create a short text message and send it to other mobile phones. Note: Message transmission is available only when your phone is operating in a digital network and if service is supported by Reliance. 60 61 MMeessssaaggeess MMeessssaaggeess 1. Enter the message contents and press the Next soft key. For further details about how to enter text, see page xx. Press the Options soft key and select Templates to add a template message. 2. Enter a destination number using the numeric keys. Pressing the Ph Book soft key allows you to search your Phonebook for a number. You can retrieve one of the numbers labelled as Mobile. 3. To send the message to multiple destinations, press the key to insert a space and repeat step 2. 4. When you finish entering destinations, press the Next soft key. 5. To select an option, press the Up or Down key. The following options are available:
Msg: press the Edit soft key to change the message contents youve already entered in step 1. Send To: press the Edit soft key to change the destination phone numbers. Settings: press the Edit soft key to change the message setting. Scroll to an option using the Up or Down key and change the setting using the Left or Right key. The following options are available:
- Priority: select the message priority.
- Validity: select how long your message is valid at the SMS centre while attempts are made to deliver them to the recipients.
- Send Later: select how long the delivery of the message will be delayed at the SMS centre, if you do not want to send it immediately.
- Delivery ACK: turn the delivery acknowledgement feature on or off. When this is activated, the network informs you whether or not your message has been read by the recipients.
- Save Message : set whether or not the phone saves the message in the Outbox after transmission. When you select Prompt Save, the phone will ask if you want to save the message. Note: The Delivery ACK and Save Message options can be preset in the New MSG menu (MENU 2-7-3); for details, see page xx. Save Msg: press the Save soft key to store the message contents in the Saved menu for future use. 6. Repeat step 5 to set the message options. 7. After changing the setting options, press the key or the Send soft key to send the message. Note: Closing the folder or pressing the before the message is sent stops the transmission. key 62 63 MMeessssaaggeess Inbox Menu 2-2 Outbox MMeessssaaggeess Menu 2-3 Your phone can store up to 99 messages total in the Inbox, Outbox and Saved message box. When the memory is full, a warning message displays and the phone rejects additional messages until you erase the obsolete ones. When you access the Inbox menu, the message list appears. To view a message, press the Up or Down key to scroll to it and press the Select soft key. If necessary, press the Up or Down key to scan through the contents. You can move to the next or previous message by pressing the Left or Right key. While viewing the message:
Press the Forward soft key to send the message. For more information about sending a message, see page xx. Press the Erase soft key to erase the message from the Inbox. To make a call to the senders number of the key. Press the key again or message, press the the Call soft key on the callback list to dial the number, or the Save soft key to save it in Phonebook. C a n n o t t h b e c h e c k e d w i p h o n e . c u r r e n t t h e Your phone can store up to 99 messages total in the Inbox, Outbox and Send message box. When you access the Outbox menu, the message list appears. A red number means that it is an urgent message. To review a message, press the Up or Down key to scroll to it and press the Select soft key. If necessary, press the Up or Down key to scan through the contents. You can move to the next or previous message by pressing the Left or Right key. While reviewing the message:
Press the Resend soft key to send the message again. For more information about sending a message, see page xx. Press the Erase soft key to erase the message from the Outbox. To make a call to the recipients number of the message, press the number on the callback list and press the again or the Call soft key to dial the number, or the Save soft key to save it in Phonebook. key. If necessary, select a key 64 65 MMeessssaaggeess Saved Menu 2-4 Templates MMeessssaaggeess Menu 2-5 Your phone can store draft messages that are yet to be sent in the Saved message box. If you save the message contents using the Save Msg menu before sending it (see page xx), you can access them using this menu. While reviewing the message:
Press the Resend soft key to send the message again. For more information about sending a message, see page xx. Press the Erase soft key to erase the message from the Outbox. To make a call to the recipients number of the message, press the number on the callback list and press the again or the Call soft key to dial the number, or the Save soft key to save it in Phonebook. key. If necessary, select a key Using this menu, you can preset up to ten message templates that you use most frequently and use them when you send a message. Scroll to the message you want by pressing the Up or Down key. Press the Select soft key to send the message using the template. For further details about how to send a message, see page xx. Press the Edit soft key to change the message. For further details about how to enter characters, see page xx. Erase Messages Menu 2-6 Using this menu, you can erase all of the messages in each message box. You can also erase all of the messages at one time by selecting All Messages. When a confirming message appears, select Yes and press the OK soft key. 66 67 MMeessssaaggeess Settings Menu 2-7 In this menu, you can preset several options for using the messaging feature. Auto Scroll (Menu 2-7-1) If a message is too long for the display, the phone displays it by scrolling the screen automatically. You can set how often the phone scrolls the message to the next screen. If you select Off, you need to scroll to the next screen manually using the Up or Down key. Message Reminder (Menu 2-7-2) When a message is received, the phone alerts you by sounding the selected ringer. You can set how often you want to be alerted. Selecting Off means that the message alert does not sound, but the New Message icon (
) appears. MMeessssaaggeess New Message (Menu 2-7-3) You can set up the default settings of the options for creating a new message. The following options are available:
Save Message: allows you to set whether or not you want the transmitted message to be saved in the Outbox.
- Do not Save: the phone does not save the message.
- Prompt Save: the phone asks you if you want to save the message or not.
- Auto Save: the phone automatically saves the message. Entry Method: allows you to select the text input mode between T9 Word (T9 English) and Alphabet. Delivery Ack: allows you to activate or deactivate the delivery acknowledgement. Message Color Setup (Menu 2-7-4) This menu allows you to change the colour of the text or background of your outgoing messages. 1. Press the Left or Right key to select a colour for the message text and press the Down key. The display shows your colour setting. 2. Press the Left or Right key to select a colour for the message background. 3. Press the Save soft key to save your setting. 68 69 MMeessssaaggeess Voice Mail Menu 2-8 When you access this menu, the display shows how many new voice messages you have received. Press the key to dial your voicemail centre and listen to the messages. Follow the instructions from the system. You can access the following options by pressing the Options soft key:
Listen: allows you to listen to the voice message. The phone automatically dials the number of your voice mail centre. Clear Icon: clears the New Message icon and resets the counter for a new voice message, if necessary. The system resets the counter automatically after you listen to all of the new messages. C a n n o t b e c h e c k e d w i p h o n e . c u r r e n t t h e t h 70 Call History You can use the Call History menu to:
view and dial the last calls you dialled, received or missed. erase the numbers in the call log memory. view the length of calls. Note: You can also access the numbers in the three key in Standby call type by pressing the Mode. Missed Menu 3-1 If Caller Line Identification service is available, your phone keeps a list of the last 10 incoming calls that you failed to answer. Contact Reliance for more information about the service. 1. Press the Up or Down key to find a number, or name if it is saved in Phonebook. 2. Press the Select soft key to confirm the highlighted number. The missed number, or name if it is saved in Phonebook, displays along with the date and time when the call was received. 3. To place a call to the number use the options Press the key or the Call soft key. Options soft key. For details, see the next page. exit the call log key. 71 CCaallll HHiissttoorryy When you press the Options soft key on the call log list, the following options are available:
Save: (shown when the number is not stored in your Phonebook) allows you to save the number in Phonebook. Show Entry: (shown when the number is stored in your Phonebook) shows you the Phonebook location number. Edit: allows to change the phone number to dial it or save it in Phonebook. Erase: erases the selected number. Send MSG: allows you to send a message to the number. For details, see page xx. Received Menu 3-2 This option lets you view up to 10 of the last calls you received if you are subscribed to the Caller Line Identification service. Contact Reliance for more information about this service. When you access this menu, a list of the calls you received displays. For more information about scrolling through the list and accessing the call log, see Missed on page xx. Dialled CCaallll HHiissttoorryy Menu 3-3 The phone stores up to 10 of the last calls you dialled. When you access this menu, a list of the outgoing calls displays. When you access this menu, a list of the calls you dialed displays. For more information about scrolling through the list and accessing the call log, see Missed on page xx. Erase History Menu 3-4 You can erase the entries stored in each of the three call logs or all three logs at once. When a confirming message displays, select Yes to erase the selected log or all of the logs. If you want to cancel the selection, select No. Press the OK soft key to confirm the selection. 72 73
1 | Users Manual 2 | Users Manual | 1.78 MiB |
CCaallll HHiissttoorryy Call Duration Menu 3-5 Your phone records the amount of air time, or talk time, used. Using this option, you can view the number of the calls to or from your phone, and the air time for all of the calls. You can easily erase the call time record at any time. This option is convenient for estimating your usage. Note: This feature is not intended to be used for billing purposes. The following options are available:
Last Call: shows the time of the last call. Total Dialled Call: shows the number of all calls you made and the total duration of the calls since the time counter was last set to zero by using the Reset All option. Total Received Call: shows the number of all calls you received and the total duration of the calls since the time counter was last set to zero by using the Reset All option. Reset All: erases all of the time measurements and resets all of the air time counters. Life Time: shows the number and total duration of all calls made to or from your phone since the phone was shipped from the factory. Sounds You can use the Sounds menu to customize various sound settings, such as the:
ringer volume, type, and tone. alert sounds and key tone. sound which plays when the phone is switched on or off. Ring Tones Menu 4-1 This option allows you to set the unique ringer melodies for the following items:
Calls: allows you to set a unique ringer for incoming voice calls. Messages: allows you to have a distinctive ringer for incoming text messages and voicemail messages independently. Schedules: allows you to have a distinctive ringer for schedule alarm settings. Select a unique ringer melody using the Navigation keys. After you change it, it plays for a few seconds. 74 75 SSoouunnddss Ringer Volume Menu 4-2 Alerts SSoouunnddss Menu 4-3 This menu allows you to adjust the ringer volume. Calls: allows you to adjust the ringer volume for incoming voice calls. Messages: allows you to adjust the ringer volume for incoming messages. Alarms/Schedules: allows you to adjust the ringer volume for alarm settings or scheduled events. Press the Navigation keys to adjust the volume level or select a ringer type. The following options are available:
- Silent: the phone does not sound a ring.
- Vibrate: the phone switches to the vibration mode. An incoming call vibrates the phone.
- 1-Beep: the phone sounds a beep.
- Level 1 ~ 8: adjust the volume level. The more bars, the louder.
- High+Vib: the phone rings in the highest volume level and then vibrates. Notes:
The options available may be different depending on the selected ringer item. When Emergency call only appears after you end an emergency call, the ringer volume for calls and messages is automatically set to Level 4. Your phone gives audible alerts (beeps) at a specified time to inform you that certain things have happened. The alerts only occur in your earpiece so that the other person does not hear them. The available alerts are:
Service : when this option is set to On, the phone sounds an alert when you exit or return to a service area. Call Connect: when this option is set to On, the phone sounds the connect tone when your call is connected to the system. Call Disconnect: when this option is set to On, the phone sounds the disconnect tone when a call is disconnected. Folder Open/Closed: when this option is set to On, the phone sounds an alert when you open or close the folder. 76 77 SSoouunnddss Key Tone Menu 4-4 Display In this menu, you can set up the sound your phone generates when you press a key. The following options are available:
Volume: adjusts the volume using the Navigation keys or the volume keys on the left side of the phone. Note: When Emergency call only appears after ending an emergency call, the key tone is automatically set to Level 4. Type: allows you to select the type of the key tone. Choose one of Beep, Drum, Piano, and Ladys Voice. Length: enables you to select Short or Long DTMF
(dual-tone multi-frequency) tones. DTMF tones are sent by your phone to access teleservices, such as a bank account. The system used by the bank or other service determines if you need short or long DTMF tones. If the service is digital, as most are, short DTMF tones will almost always work. Power On/Off Melody Menu 4-5 You can turn on or off the melody that the phone plays when it is switched on or off. Choose On to use the power on/off sound or Off not to use it. The Display feature enables you to customize various settings for the display and the light. Language Menu 5-1 This menu allows you to change the language of voice prompts, menus and key input. You can choose a language, either English, Hindi, Marathi or Gujarathi. Service Area Menu 5-2 This menu displays the service area where you currently are. The service area is also displayed for about 5 seconds when your phone is registered onto a network or when you make or receive a call. Menu Theme Menu 5-3 This menu allows you to select the menu display style. You can choose a style, either Nature or Camera. 78 79 DDiissppllaayy Wallpaper Menu 5-4 Banner DDiissppllaayy Menu 5-5 You can change the background image (wall paper) to be displayed in Standby Mode. On the Image Wallpaper list, you can select one from the default animation images and downloaded images. In addition, you can choose Digital Clock, Analog Clock or Dual Clock. When you select Dual Clock, the phone displays the analogue clocks for the two time zones selected in the Set Dual Clock menu (Menu 5-7). See page xx On the Photo Wallpaper list, you can choose from the photos you took using the camera on your phone. Note: To view your photos on this list, you need to set them as a wallpaper in the Photo Wallet menu
(Menu 0-4). See page xx. This option allows you to set a banner message to be displayed at the bottom of the display in Standby Mode. 1. If necessary, press the CLR key to delete each letter of the old greeting. Press are hold the CLR key to clear the display. 2. Enter your banner message. For further information about how to enter characters, see page xx. 3. When you finish entering the message, press the Next soft key. The screen allowing you to change the banner colour appears. 4. Press the Left or Right key to change the colour for the text font and press the Down key. 5. Press the Left or Right key to change the colour for the text shadow and press the Save soft key. 80 81 DDiissppllaayy 3. Select the time zone for the second clock by pressing the Left or Right key. 4. Press the Save soft key to confirm the selection. To apply the daylight saving time:
1. When Location is highlighted, press the Left or Right to display DST. Press the Down key. 2. Select Yes to use the daylight saving time for the first clock. Otherwise, select No. 3. Press the Down key and repeat step 2 for the second clock. 4. Press the Save soft key to confirm the selection. Service LED Menu 5-8 This option allows you to select whether or not the service light on the folder is used. DDiissppllaayy Backlight Menu 5-6 You have several options for setting how the LCD backlight operates. Remember that backlight use drains your battery faster. The following options are available:
Folder open: the backlight remains on when the folder is open. 30 seconds: the backlight switches on when you press a key or open the folder and switches off 30 seconds after that. 8 seconds: the backlight switches on when you press a key or open the folder and switches off 30 seconds after that. Dimming: the backlight is not used. Set Dual Clock Menu 5-7 You can choose two time zones to be displayed when you select Dual Clock for the wallpaper image; for details, see page xx. To select time zones for the dual clock:
1. When Location is highlighted, press the Down key. 2. Select the time zone for the first clock by pressing the Left or Right key and press the Down key. 82 83 Voice Tools In this menu, you can use the phones voice features, allowing you to:
dial a number by saying an associated name. record a voice memo. set the phone to answer a call and record the callers message. Voice Dial Menu 6-1 When your phone is in the digital mode, you can call up to 20 stored entries by speaking the name into the microphone. Using the voice dialling option requires that you first program the phone to recognise the name of the person you are calling. Record (Menu 6-1-1) This option allows you to record names and register numbers for subsequent voice dialling. The phone provides voice prompts and screen displays to guide you through the recording process. 1. Say the name you want to program at the prompt. The phone stores the name as a first sample. 2. Respond to the prompt by repeating the name after the beep. The phone stores the name as a second sample, and then prompts you to enter the phone number. 3. Enter the phone number by pressing the number keys and press the OK soft key. VVooiiccee TToooollss Tips for Recording a Name Avoid recording similar names phonetically. If you record a similar name to one already in the memory, the phone requests another name. Speak clearly and naturally. The person who will use the phone should record the name. The phone does not recognize the name if the voice is different. Avoid too long or too short a name. Names with two to five syllables are recommended. If this feature does not work properly, erase the name and try again with another name. Practice several times to obtain the best result. You can record up to 20 names. If you try to record more than that, the phone announces Out of space to store voice dial. Review (Menu 6-1-2) When a list of your stored voice dial numbers displays, scroll to the entry you want to review and press the Play soft key. The recorded name plays audibly. You can erase the selected number by pressing the Erase soft key. 84 85 VVooiiccee TToooollss Erase All (Menu 6-1-3) This option erases all of the entries on the Voice Dial list. When a confirming message displays, select Yes and press the OK soft key. Activate By (Menu 6-1-4) Voice Dialling is always active once you have programmed the phone to accept voice dialling entries and the associated phone numbers. To place a call using voice dialling, simply press and hold the key in Standby Mode and then say the name into the phone after you hear a prompt. Using the Activate By menu, you can set how to initiate a voice dialling call. The following options are available:
] Only: enables voice dialling only by pressing and key.
]/ Folder: enables voice dialling by pressing and key or by opening the folder.
] /Headset: enables voice dialling by pressing and key or he button on your ear-
holding the
holding the
holding the microphone. Voice Memo VVooiiccee TToooollss Menu 6-2 Note: You can quickly enter this menu by pressing the Down key in Standby Mode. Record (Menu 6-2-1) You can record up to voice memos of 4 minutes total. This feature shares the memory with the Voice Answer feature and the amount of time for memos are dependent on the available memory less any callers'
messages; for example, if your phone has the callers'
messages of 4 minutes total, you cannot record any voice memo. 1. Record a memo by speaking to the microphone. While you are recording, a timer displays to show you the elapsed time. You can pause recording by pressing the Left key and then resume by pressing the Right key. 2. Press the Stop soft key to end recording. The screen provides you with the following choices. Scroll to an option and press the Select soft key. Review: allows you to review the voice memo. The screen displays the length of the memo along with the date and time. Rerecord: allows you to discard the current memo and record another one. Save: allows you to save the voice memo. 86 87 VVooiiccee TToooollss 3. When you are satisfied, select the Save option and press the Select soft key. 4. Enter a title for the memo and press the Next soft key. Review (Menu 6-2-2) When a list of your voice memos displays, scroll to the memo you want to review and press the Play soft key. The phone plays back the memo. You can pause the playback by pressing the Left key and then resume by pressing the Right key. On the memo list, press the Options soft key to use the following options:
Erase: erases the selected memo. Info: shows detailed information about the memo, such as title, length, memory size and date and time when the memo was recorded. Erase All (Menu 6-2-3) This menu allows you to erase all of the voice memos. When a confirming message displays, select Yes and press the OK soft key. C a n n o t b e c h e c k e d w i p h o n e . c u r r e n t t h e t h Answer Machine VVooiiccee TToooollss Menu 6-3 If you are not able to answer an incoming call, you can set your phone to answer a call with the default greeting message and record the callers message. As this feature shares the memory with voice memos, the total length of messages is dependent on the available memory less any voice memos. Note: The voice answer feature does not work when your phone is in the analogue mode. On/Off (Menu 6-3-1) This option allows you to enable or disable the voice answer mode. Voice Message (Menu 6-3-2) You can listen to the callers messages recorded in your phone. When you access this option, a list of the recorded messages appears. Note: If the phone has the callers messages waiting to be checked, it displays the total number of the messages and the date and time when the last message was recorded. Pressing the Play(??) soft key takes you to the Inbox. Press the Up or Down key to scroll to a message and press the Play soft key to play it back. You can pause the playback by pressing the Left key and then resume by pressing the Right key. 88 89 VVooiiccee TToooollss VVooiiccee TToooollss VVooiiccee TToooollss On the message list, press the Options soft key to the following options:
To play back the currently selected message, highlight Play and press the Select soft key. Erase: erases the selected message. Info: shows detailed information about the message, such as callers number if identified, elapsed time, length, memory size and date and time when the message was recorded. Talk: places a call to the callers number, if identified. Settings (Menu 6-3-3) You can change the settings for the voice answer mode. The following options are available:
Greeting: Your phone provides you with the two default greeting messages to be played when a call comes in. You can also record up to two own greeting messages. To record a greeting message:
1. Select Record and press the Select soft key. 2. Select the entry either My Message 1 or My Message 2 by pressing the OK soft key. 3. Wait until a beeping prompt sounds and record a greeting message by speaking into the microphone. You can pause recording by pressing the Left key and then resume by pressing the Right key. 4. When recording is complete, press the Save soft key. The phone automatically saves and activates the message. 90 To select a greeting message:
1. Highlight Select and press the Select soft key. 2. Select My Message 1/2 to use one of your messages or Default 1/2 to use one of the default messages. 3. Press the OK soft key to save your selection. Screening: allows you to enable or disable the screening speaker which allows you to listen to the callers message while the caller is leaving it. Wait Time: allows you to set how long the phone waits before answering a call with the greeting message. Selecting Off means that the phone plays back the message as soon as a call comes in. 91 Organiser The Organiser feature enables you to:
keep track of important dates and events. create a list of things to do and memos of things you need to remember. set an alarm to ring at a specific time. use the phone as a calculator. check the time in another part of the world. Scheduler Menu 7-1 In this menu, you can keep track of your daily or monthly schedule. Today (Menu 7-1-1) You can schedule up to 9 events for the current day, indicating each events start and end time. You can even have your phone's calendar alert you before an event commences. Events scheduled for future dates automatically appear on your Today schedule on that day. Scheduling a New Event 1. Enter your event contents and press the Next soft key. For further details about how to enter characters, see page xx. 2. Enter the start time and date using the numeric keys. Note: You can move through the input fields using the Navigation keys. 92 OOrrggaanniisseerr 3. Enter the end time and date using the number keys. 4. Select when an alarm will inform you of the event, by pressing the Left or Right key. Selecting No Alarm means that the phone does not ring the alarm. 5. Press the Save soft key to store your event. Viewing Your Todays Schedule The list of the events stored on the current day displays when you select the Today menu (Menu 7-1-
1). While viewing the schedule list, press the Up or Down key to scroll to an event and:
To view details, press the View soft key. To view the Start and End time settings, use the Left or Right keys. You can move to the previous or next event by pressing the Left or Right key. While viewing the event, press the Edit soft key to change the event, or press the Erase soft key to erase the event. Press the Options soft key to use the following options:
Add New: allows you to add a new event. Erase : allows you to erase the event. Erase All: allows you to erase all of the events. 93 OOrrggaanniisseerr All (Menu 7-1-2) This option allows you to view the current month, as well as past or future months, in calendar format. On the calendar, the current day is boldfaced and days with scheduled events are indicated by a box inside the calendar day. Note: You can quickly access this menu by pressing the Left key in Standby Mode. Scrolling Through the Calendar You can move up or down by one day by pressing the Left or Right key. You can move right or left by one week by pressing the Up or Down key. To display the next or previous month, press the or key. Creating a New Schedule You can store up to 70 events total in the scheduler, with up to 9 events for one day. 1. Select a day on the calendar, referring to Scrolling Through the Calendar on page xx and press the Add soft key. 2. Follow the procedure in Scheduling an Event on page xx. OOrrggaanniisseerr Viewing Your Schedule Select a day with scheduled events on the calendar, referring to Scrolling Through the Calendar on page xx and press the View soft key. The first event stored on the selected day displays. To view the Start and End time settings, use the Up and Down key. You can move to the previous or next event by pressing the Left or Right key. While viewing the event, press the Edit soft key to change the event, or press the Erase soft key to erase the event. Task List Menu 7-2 This feature allows you to enter up a list of tasks to be done and assign both a priority and a deadline to each task. Creating a New Task 1. Enter the first task and press the Next soft key to confirm. For further details about how to enter characters, see page xx. 2. Enter the time and date by which the task needs to be done, by using the numeric keys. Note: You can move through the input fields using the Navigation keys. 94 95 OOrrggaanniisseerr 3. Select High or Low priority using the Left or Right key. 4. Press the Save soft key to store the task. Viewing a Task The list of the tasks displays when you access the Task List menu (Menu 7-2). While viewing the task list, press the Up or Down key to scroll to a task and:
To view details, press the View soft key. You can move to the previous or next task by pressing the Navigation keys. While viewing the task, press the Edit soft key to change the task, or press the Erase soft key to erase the task. Press the Options soft key to use the following options:
Add New: allows you to add a new task. Erase : allows you to erase the selected task. Erase All: allows you to erase all of the tasks. Memo Pad OOrrggaanniisseerr Menu 7-3 This feature allows you to write down memos about anything you need to remember. Writing a New Memo 1. Enter the memo contents. For further details about how to enter characters, see page xx. 2. Press the Save soft key to save the memo. Viewing a Memo The list of your memos displays when you access the Memo Pad menu (Menu 7-3). While viewing the memo list, press the Up or Down key to scroll to a memo and:
To view details, press the View soft key. You can move to the previous or next memo by pressing the Navigation keys. While viewing the memo, press the Edit soft key to change the memo, or press the Erase soft key to erase the memo. Press the Options soft key to use the following options:
Add New: allows you to add a new memo. Erase : allows you to erase the selected memo. Erase All: allows you to erase all of the memos. 96 97 OOrrggaanniisseerr Alarm Menu 7-4 Calculator OOrrggaanniisseerr Menu 7-5 This option allows you to set up to three alarms to ring at a specific time. To set an alarm:
1. Select an alarm type, Daily Alarm or Weekly Alarm, and press the Set soft key. 2. Select On by pressing the Left or Right key. 3. Press the Down key and enter the time and date for the alarm to ring. 4. Press the Down key and select an alarm melody by pressing the Left or Right key. 5. Press the Down key and select a repeat option by pressing the Left or Right key. You can choose either Daily or Once for the daily alarm, or select a day of the week for the daily alarm. 6. Press the Save soft key to save the alarm setting. To stop the alarm when it rings, press the Stop soft key. If you stop the alarm using other keys, the Snooze function is activated and the phone rings the alarm after 5 minutes. (Pls confirm this feature???) To deactivate an alarm setting, access it from the alarm list and select Off. Using this feature, you can use the phone as a calculator. The calculator provides you with the basic arithmetic functions; addition, subtraction, multiplication and division. 1. Enter the first number on the first line using the numeric keys. Notes:
To erase any mistakes or clear the display, press the CLR key. Use the key to enter a decimal point and the key to change the sign of a number to a negative (-). 2. Enter the operation for your calculation on the second line by pressing the Navigation keys, according to the graphic on the display. 3. Enter the second number. 4. Repeat step 2 and 3 as many times as required. 5. To view the result, press the = soft key. 6. To perform another calculation, press the CLR key to reset the calculator and repeat from step 1. 98 99 OOrrggaanniisseerr World Time Menu 7-6 This menu allows you to check the current time for 24 major cities around the world. Select the city corresponding to your time zone by pressing the Navigation keys one or more times. The local date and time display. To turn the DST (Daylight Saving Time) setting on:
1. After selecting the time zone, you want to apply the DST, press the DST soft key. 2. Select On and press the OK key. The DST icon appears on the left of the time. To cancel the setting, select Off. Count Down Menu 7-7 This menu helps you know how much time it takes for you to do something, or how many months, days, hours and minutes until a specific day arrives. You can create up to 9 counters using this menu. Creating a New Counter 1. Enter the contents for your counter and press the Next soft key. For further details about entering characters, see page xx. OOrrggaanniisseerr 2. Enter the time and date you want to count down from. Note: You can enter a year between 1980 and 2099. 3. Press the Save soft key to store the counter. Viewing a Counter The list of the counters displays when you access the Count Down menu (Menu 7-7). While viewing the counter list, press the Up or Down key to scroll to a counter and:
To view details, press the View soft key. You can move to the previous or next counter by pressing the Navigation keys. While viewing a counter, press the Edit soft key to edit the counter, or press the Erase soft key to erase the counter. Press the Options soft key to use the following options:
Add New: allows you to add a new counter. Erase : allows you to erase the selected counter. Erase All: allows you to erase all of the counters. 100 101 Settings Many different features of your phone can be customised to suit your preferences. Call Menu 8-1 This menu contains the suboptions for answering or redialling a call. Auto Redial (Menu 8-1-1) When this menu is activated, your phone automatically redials the call up to 10 times when a connection fails. To activate this feature, select how often the phone will automatically retry the call; 60 Seconds, 30 Seconds and 10 Seconds are available. Select Off to deactivate the Auto Redial feature. Answer Mode (Menu 8-1-2) This menu allows you to select how to answer an incoming call. The following options are available:
key. Any Key: the phone answers when you press any key except for the Folder Open: the phone answers when you open the folder. When the folder is already open, you can press the key SSeettttiinnggss SEND Key: the phone answers only when you press the key. Call Forward (Menu 8-1-3) This menu allows you to forward your incoming calls to another number. When the call forwarding option is enabled, the phone does not ring or accept incoming calls. You can still make outgoing calls without any problems. Note: This feature is only available when your network operator supports it. Contact Reliance to check its availability. The following options are available:
Unconditional: calls are always forwarded. When Busy: calls are forwarded when you are already on the phone. No Reply/Not Reachable: calls are forwarded when you do not answer the phone or the phone is powered off or out of the service area. To set your forwarding options:
1. Choose the type of call forwarding by pressing the Up or Down key and press the Select soft key. 2. Select Activate and press the OK soft key. Select Deactivate to disable the call forwarding option. 3. Enter a phone number to which your calls will be forwarded and press the Save soft key. 102 103 SSeettttiinnggss Once Call Forwarding is enabled, a notification text appears to inform you that your calls will be diverted, each time a call is forwarded or you switch the phone on. (Pls confirm this feature???) Call Waiting (Menu 8-1-4) Call Waiting lets you receive a second call during a conversation. Select Activate to enable the call waiting feature;
otherwise Deactivate. When Call Waiting is enabled, you can respond to an incoming call by pressing the a call. This puts the first caller on hold and answers the second call. For further details about answering a waiting call, see page xx. key while you are on SSeettttiinnggss MENU 8-2 Phone/System Set Time (Menu 8-2-1) To display the correct date and time on the idle screen or to use the Organiser features, such as Scheduler, Task List, Count Down, Alarm and World Time, you need to set the current time and date using this menu. Enter the time and date using the numeric keys. You need to enter the time in 24-hour format. The minute, hour, month and day each must be entered using 2 digits and the year requires all 4 digits. Set NAM (Menu 8-2-2) NAM stands for numerical assignment module, essentially your phone number. Your phone can have two NAMs. This means that you can have two phone numbers for using your phone and can quickly and easily switch your service back and forth between the two numbers. If you change the NAM, the phone turns off by itself and back on, and then acquires service using the new NAM setting. Version (Menu 8-2-3) This menu allows you to view the software and hardware versions of your phone. This feature is helpful if you need to the call customer care. 104 105 SSeettttiinnggss Security Menu 8-3 Change Code (Menu 8-3-2) SSeettttiinnggss Your phone provides you with many security options, including a user-programmable lock code and call restriction features. To access the Security menu, you need to enter a lock code. The lock code is preset to 0000 at the factory. Lock Mode (Menu 8-3-1) When the phone is locked, you cannot operate the phone until you enter the lock code. The following options are available:
Never: the phone remains unlocked. On Power-Up: the phone locks automatically the next time you turn it on. Now: the phone locks immediately. To place an emergency call, enter the number and then press the key. The phone recognises three emergency numbers stored in the Emergency Numbers menu (Menu 8-3-3). To unlock the phone, press the Unlock soft key and enter the lock code. The phone returns to Standby Mode. This feature allows you to change your current lock code to a new one. The lock code is preset to 0000 at the factory. Enter a new, four-digit lock code and then press the Save soft key. Emergency Numbers (Menu 8-3-3) Your phone provides you with the option for storing three emergency numbers. All of these numbers can be manually dialled at any time even when your phone is locked. IMPORTANT NOTICE!
Emergency calling may not be available on all wireless networks at all times. A connection cannot always be guaranteed, due to various transmission methods, network parameters and user settings used to complete a call from your wireless phone. DO NOT depend on this phone as a primary method of dialling 100 or for any other essential or emergency communications. Remember to always turn your phone on and check for the adequate signal strength before placing a call. To store an emergency number:
1. Press the Up or Down key to select a number location and press the Select soft key. 106 107 SSeettttiinnggss SSeettttiinnggss Clear Phone Book (Menu 8-3-5) This menu allows you to erase your Phonebook entries. When a confirming message displays, select Yes and press the OK soft key to confirm. Reset Phone (Menu 8-3-6) Resetting the phone restores the default settings of all of user-selectable options. When a confirming message displays, select Yes and press the OK soft key to confirm. The phone reboots, turning itself off and then back on, and returns to Standby Mode. 2. If necessary, press and hold the CLR key to clear the existing number. 3. Enter the required number. Each emergency number can be up to 24 digits long. 4. Press the Save soft key to store the number. To make an emergency call in the lock mode, simply enter one of the stored emergency numbers, and then press the key. Voice Privacy (Menu 8-3-4) Used only in digital networks, Voice Privacy encrypts the voice channel so that people cannot eavesdrop on your conversation. The following options are available:
Standard: turns this feature off. The phone will use a standard line for calls. Enhanced: turns this feature on. The phone will make and receive calls on an encrypted high security line. Note: This feature may not be available in all areas. Contact Reliance for details and its availability. 108 109 C a n n o t b e c h e c k e d w i p h o n e . c u r r e n t t h e t h R World This R World menu allows you to:
launch the web browser. play the downloaded multimedia items. enjoy the games. reset the web browser. R-Menu Menu 9-1 Your phone comes equipped with a web browser which makes it possible for you to access the wireless web. The web browser allows you to access up-to-the minute information through your phone. Browsing the wireless web through your phone is unlike using your computer; site providers have selected only the critical aspects of their sites to present to wireless phone users and they have removed most of the graphics. Each time you start the web browser, the phone will connect to the wireless web and the Service icon (
) will appear on the display. Any time this icon is visible on the display, you are connected to the wireless web and will be billed accordingly. Rates will vary according to your service plan. The web browser will end the connection after a certain period of network inactivity and will automatically reconnect as necessary. For this reason, you may find that you are billed for several network connections within a single session. This is normal and is designed to minimise your bill. RR WWoorrlldd Launching the Web Browser Note: The first time you use the web browser, you will go through a security setup process that takes 3 to 5 minutes. Please follow the on-screen prompts to complete the security setup process. This initial setup process occurs only the first time you access the service. 1. Accessing the R-Menu menu (Menu 9-1) connects your phone to the wireless web. You can also press the key in Standby Mode. 2. Once you are connected, the home page or the last page you visited displays. The opening page contents may be different according to your wireless web service provider. 3. To scroll through the screen, use the Up or Down key. Exiting the Web Browser To exit the web browser, simply press the any time. key at 110 111 RR WWoorrlldd RR WWoorrlldd Navigating the Web Browser When you use the web browser, some keys on your phone operate differently than when on a normal phone call. These keys are explained below. The web browser presents on-screen items in one of the following ways:
text or numeric input links (embedded in content) numbered options (some options may not be numbered) simple text Heres how the keys work in the web browser:
Navigation keys: Use these keys to scroll to and select browser options. The currently selected option is indicated by an arrow. You can also use them to move the cursor when editing text. Left soft key: This is the left soft key used to execute the commands at the bottom left of the browser display. Right soft key: This is the right soft key used to execute the commands at the bottom right of the browser display. Cursor keys: Use these keys to move the cursor when editing text. END key: This key ends the web browser connection and returns the phone to Standby Mode. Clear key: This key performs two important functions:
Sends you back in the browser. Pressing it once sends you back one page. Pressing and holding this key sends you back to the home page. Clears out the entered text or numbers. When entering characters, press this key to clear the last number, letter or symbol. Press and hold this key to completely clear the input field.
Numbered keys 0 - 9: If the items on a page are numbered, you can use these keys to select them. Volume keys: These keys allows you to scroll up or down by a page or change the volume setting. Using the Web Browser Menus On the web browser, you can access the following options by pressing the Menu soft key:
Reload: reloads the current web page. Home: takes you back at any time to the homepage of the wireless web service provider. Bookmarks: allows you to load a bookmarked web page directly. 112 113 RR WWoorrlldd RR WWoorrlldd Mark Site: allows you to set a bookmark for most pages; they can be accessed directly from any web page. Bookmarks save you time by reducing the number of steps required to access a given page. About Openwave: provides you with information about Openwave and your version of the web browser. Advanced: gives you access the following advanced features:
- Show URL: displays the URL address of the site where you are currently connected. It also enables you to declare the current site as the startup homepage.
- Homepage: allows you to change the startup homepage manually.
- Set WAP Proxy: allows you to configure the proxy settings required for connecting to the wireless web.
- Offline Service: Most applications are stored on a server that cannot be accessed outside your wireless coverage area. However, some applications can be stored in the cache of your phone, enabling you to use them offline. You can remove the associated site from the cache at any time.
- Outbox: stores outgoing requests from the browser so that they can be processed at a later date.
- Restart Browser: restarts the browser without exiting it.
- Encryption: This option is automatically set by the service provider. You do not need to change it. Entering Text in the Web Browser When prompted, you can enter letters, numbers or symbols same way as in the phone mode. See page xx for more information about how to enter characters. Multimedia Menu 9-2 In this menu, you can use the multimedia files downloaded from R-World. You can download up to 3 items. To play back a multimedia file:
1. When the Show List highlights, press the Select soft key. 2. When the list of the downloaded items displays, scroll to the item you want to play by pressing the Up or Down key. 3. Press the Select soft key to start playing the file. 4. To pause resume the playback adjust the volume repeat the playback cancel the repeating mode Press the Pause soft key. Play softkey. volume keys. Loop soft key. End-Loop soft key. 5. To exit the screen, press the CLR key. 114 115 RR WWoorrlldd RR WWoorrlldd Key Info.: shows you the key helper screen. Continue: allows you to continue the last game you played. This option is activated only when you already played the game. 4. To stop the game, press the key. key or the CLR Reset R-Menu Menu 9-4 If the screen is not clear or it often freezes when you are navigating the web browser, you can use this feature to clear the problem. When a confirming message displays, select Yes and then press the OK soft key. To remove a multimedia file from the phones memory:
1. Select the Erase List by pressing the Up or Down key. 2. When the list of the downloaded files displays, scroll to the file you want to delete by pressing the Up or Down key. To delete all of the files, select All. 3. Press the Select soft key. 4. When a confirming message displays, select Yes and press the OK soft key. Games Menu 9-3 This menu allows you to play the three games; Push Push, X-Flighter and Space War. 1. Press the Up or Down key to scroll to a game and press the Select soft key. The game start screen displays. 2. For Push Push, press the OK soft key and the key helper screen appears. Press the OK soft key to start the game. For X-Flighter or Space War, press the corresponding number key to select an option:
New game: starts a new game. HighScore: shows you the High Score table. 116 117 Photos Using the camera module built in your phone, you can take pictures of people or events while on the move. You can set a picture as a wall paper image or caller image. Camera Menu 0-1 In this menu, you can take a picture. The camera produces JPEG pictures. Note: When you take a picture in direct sunlight or under too bright illumination, shading may occurs on the picture. To take a picture:
1. Accessing the Camera menu turns on the camera at the top left of the phone. Or, press and hold the key in Standby Mode. The image to be captured appears on the display. 2. Adjust the image by rotating the camera module and aiming it at the subject. PPhhoottooss 3. To Press the flip the image vertically volume keys. change the image size change the image resolution use the options review the picture stored in your Photo Album return to the capture mode from the review screen Left or Right key. Up or Down key. Options soft key. See below. Review soft key. CLR key. 4. Press and hold the key to take the picture. The phone automatically saves the picture in the Photo Album menu (Menu 0-2) and returns to the capture mode. 5. Press the Review soft key to view the taken picture. If you want to use the camera options, press the Options soft key. See page xx. 6. When you are finished, press the return to Standby Mode. key to 118 119 PPhhoottooss PPhhoottooss Color Tones This options allows you to change the color tone of the picture. Press the Navigation keys to find the tone you want to use. Mono, Sepia, Negative, Emboss, Sketch, UV Positive and UV Negative are available. To set the phone to adjust the color automatically, select Auto. White Balance This setting adjusts the color balance of the picture to remove the current lighting conditions add. With this setting, you can make your picture appear warm or cool. Scroll to the setting you want to use by pressing the Up or Down key. When you select Manual, you can adjust the balance using the Navigation keys. Using the Camera options When you press the Options soft key in the capture mode, the following options are available for the current shot:
Flash You can use the flash which allows you to take a picture of the best quality when it is dark. Select On this Shot to use the flash only for the current shot and Always On to use it for all of the pictures you take. When the flash turns on, the flash icon (???) appears on the top right of the image Self Timer You can set the phone to take a picture at a predefined time. Once you set the time, the timer (???) appears on the top right of the image. When you press and hold the seconds. The phone automatically takes and saves a picture when the specified time expires. key, it counts down and turns red before 3 Brightness You can adjust the brightness of the image. When the brightness is selected Auto, the phone automatically determines the setting. Fun Frames This option allows you to use a frame on the picture. Press the Navigation keys to find the frame format you want to use. 120 121 PPhhoottooss Photo Album Menu 0-2 Erase You can erase the selected picture or all of the pictures. PPhhoottooss PPhhoottooss In this menu, you can review the pictures you have taken. By default, your phone displays them in the thumbnail mode, which shows pictures as a small image. To scroll through the pictures use the options view the selected picture in a large size on the full screen return to the thumbnail mode Press the Navigation keys. Options soft key. For details, see below. Expand soft key. Thumbnail soft key. Using the Picture Options Press the Options soft key while reviewing a picture, and the following options are available:
Camera You can switch the display to the capture mode. Save to Wallet This option copies the picture to the Photo Wallet menu (Menu 0-3). See the next page. Edit Caption This option allows you to change the pictures title displayed on the right top of the picture in the expand mode. Photo Info. This option shows you information about the current picture, such as title, time and date when it was taken, image size and quality. The display scrolls the information screen automatically. Press the Up or Down key to scroll the screen by one item. You can also scroll by one page by pressing the Scroll soft key. Thumbnail/Expand You can switch the display to the thumbnail mode or the expand mode. Photo Wallet Menu 0-3 Photo Wallet allows you to store the pictures independently, like your photo album. By default, your phone displays them in the thumbnail mode, which shows pictures as a small image. 122 123 PPhhoottooss To scroll through the pictures use the options view the selected picture in a large size on the full screen return to the thumbnail mode Press the Navigation keys. Options soft key. For details, see below. Expand soft key. Thumbnail soft key. When you press the Options soft key while reviewing a picture, the following options are available:
Wallpaper: copies the picture into the Photo Wallpaper image folder. You can use it in the Wallpaper menu (Menu 5-4). Phonebook: allows you to set the picture as a caller image for a Phonebook entry. Erase: allows you to erase the selected picture or all of the pictures from Photo Wallet. Settings PPhhoottooss Menu 0-4 This menu allows you to set up the options for using the camera and pictures. Security (Menu 0-4-1) You can lock the pictures so that a person without your approval cannot review them. To access the Security menu, you need to enter the lock code. It is preset to 0000 at the factory. Select On and press the OK soft key. Once you have locked the pictures, you need to enter the lock code each time you access the Photo Album and Photo Wallet menus. To deactivate this feature, select Off. Camera Settings (Menu 0-4-2) You can change the default image settings. The following options are available:
Resolution: allows you to adjust the resolution of the image. You can select either High:640*480, Med:320*240 or Low:160*120. Quality: allows you to change the image quality. You can select either Economy, Normal or Fine. 124 125 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first. Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and life-time of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-
ion batteries are particularly affected by temperatures below 0 C (32 F). Do not short-circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the
+ and terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuit. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. Health and Safety Information Precautions When Using Batteries Your phone is powered by a rechargeable Li-ion standard battery. Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time, including talk time and standby time, is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. 126 127 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a To do list or flipping through your phonebook takes your attention away from your primary responsibility, driving safely. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. 9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you. 10. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-emergency wireless number. 128 129 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Operating Environment Electronic Devices Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its users guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Most modern electronic equipment are shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers:
should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on;
should not carry the phone in a breast pocket;
should use the ear opposite the pacemaker to minimize potential interference. If you have any reason to suspect that interference is taking place, switch your phone off immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. 130 131 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch your phone off in any facility where posted notices require you to do so. Potentially Explosive Environments Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch the phone off while at a refuelling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. 132 133 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call:
1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location. Emergency numbers vary by location. 3. Press the key. If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and Reliance. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so. Other Important Safety Information Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch your phone off before boarding an aircraft. The use of wireless phones in aircraft may be dangerous to the operation of the aircraft, and is illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both. 134 135 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-
water solution. Do not paint the phone. Paint can clog the devices moving parts and prevent proper operation. Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices. If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of small children. Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone. Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phones electronic circuit boards. Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. 136 137 Glossary Airtime - Actual time spent talking on the wireless phone. Most carriers bill customers based on how many minutes of airtime they use each month. Antenna - A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas. Base Station - The fixed radio transmitter/receiver that maintains communications with mobile radio telephones within a given area. (Typically called a cell or cell site) CDMA (Code Division Multiple Access) A spread-
spectrum approach to digital transmission. With CDMA, each conversion is digitized and then tagged with a code. The mobile phone deciphers only a particular code to pick the right conversation off the air. The transmitted signal is just above noise level across the available bandwidth. Channel - Communications signals transmit along paths called channels. Codec - Compression & Decompression. Deactivation - The process of rendering a wireless phone inactive. GGlloossssaarryy DTMF - (Dual-tone Multi-Frequency ) You send DTMF signals when you enter numbers by pressing the digit keys. EVRC - (Enhanced Variable Rate Codec) EVRC is a new global standard for compressing and decompressing voice signals. EVRC uses a lower bit rate (the number of bits sent per second) than existing CDMA vocoders, while providing significant improvements in voice quality. This technology enables your phone to provide superb voice quality while benefiting from the ability to process more cellular voice calls using less bandwidth than the voice codecs in CDMA networks today. Frequency - A measure based on time, as one or more waves per second, in an electrical or light wave information signal. A signals frequency is stated in cycles-per-second or Hertz (Hz). Hands-Free - A feature that permits a driver to use a wireless phone without lifting or holding the handset -
an important safety feature for automobiles, tractors and most other motorized vehicles. LCD - (Liquid Crystal Display) Commonly used to refer to the screen display on the wireless phone. LED - (Light Emitting Diode) Commonly used to refer to a small light on the wireless phone or on the Desktop Charger. The LED lights on the phone to indicate an incoming call. The lights on the charger indicate that battery charging is taking place. 138 139 GGlloossssaarryy Prepend - The addition of a prefix, such as an area code, to a phone number. RF - Radio Frequency Roaming - The ability to use a wireless phone to make and receive calls in places outside of the home service area. Service Charge - The amount paid each month to receive wireless service. Standby Time - The amount of time a fully charged wireless portable or transportable phone can be on and idle without being in use. (See Talk Time) Talk Time - The length of time a person can talk on a portable or transportable wireless phone without recharging the battery. Vocoder - Voice Coder. A device used to convert speech into digital signals. Wireless - Radio-based Systems that allow transmission of telephone or data signals through the air without a physical connection, such as a metal wire
(copper) or fiber optic cable. Index A Accessories 9 Air time (1-5) 55 Alarm (5-5) 84 Alerts (7-3) 98 Animation 101 Auto answer (0-1) 105 Auto retry (0-3) 106 B Backlight (8-4) 102 Banner (8-3) 102 Battery charging 18 installing 17 low battery indicator 20 removing 18 precautions 116 C Calculator (5-6) 85 Call answer (0-2) 105 answering 34 emergency 25 ending 25 forwarding 37 from Phone Book 26 incoming (1-2) 53 making 24 missed 36 outgoing (1-1) 52 redialling last 25 restriction 111 three way 39 waiting 38 Caller ID 36 Camera (#) 114 Care 126 Characters, entering 40 Charging batteries 18 Clock 103 T h e l l i n d e x w i l a t e r a i n b e u p d a t e d v e r s i o n Connect tone 98 Contrast (8-6) 103 Correcting number 25 D Data/fax Dialling receiving/sending 109 Data/fax (0-7) 108 pause 29 prepend 26 speed 27 voice 32, 88 Disconnect tone 98 Display LCD 10 external 15 DTMF tone length (7-6) 99 Dual clock (8-5) 103 E Erasing History (1-4) 54 Erase Msg (3-7) 69 External Display 15 F Finding phonebook 56 G Games (9) 104 Greeting 94 140 141 IInnddeexx I Icon description 13 Inbox ( 3-3) 66 In-call options 35 Incoming calls (1-2) 53 Installing battery 17 K Key Beep (7-5) 99 Keys description 11 location 10 L Language (0-4) 106 Last number redialling 25 Letters, entering 40 Listening voicemail 65 Lock code 111 Low battery indicator 20 M Maintenance 126 Memo pad (5-4) 83 Memory (2-5) 61 Memory, clearing 113 Menus list 49 scrolling 47 shortcuts 48 Messages erasing 69 filed 68 greeting 94 setup (3-8) 70 voice 65 Minute beep 98 Missed calls 36 Modes phone 22 text input 40 Mute microphone 35 N Names entering 40 find (2-1) 56 NAM setting (0-5) 107 Number adding in an entry 60 correcting 25 my phone # (2-4) 61 searching 56 O Outbox (3-4) 67 Outgoing calls (1-1) 52 P Phone layout 10 lock 110 my number (2-4) 61 Phonebook (2) 56 PIN code 112 Planner (5) 79 Power save mode 23 Prepend dialling 26 R Redialling auto 106 last call 25 Removing battery 18 Reset phone 113 Restrict 111 Ring type (7-2) 97 volume (7-1) 96 Roam ringer (7-4) 99 IInnddeexx W Web Browser get in web (4-1) 73 prompt (4-2) 78 World time (5-7) 86 Writing new message 62 S Safety batteries 116 information 116 precautions 7 Schedular (5-2) 81 Searching phonebook 56 Security (0-9) 110 Service alert 98 Service light 16 Setting NAM (0-5) 107 Setting system (0-6) 107 Setting time (5-9) 87 Setup (0) 105 Sounds (7) 96 Speed dialling 27 Standby mode 22 Switching on/off phone 21 T Task List (5-3) 82 Text, entering 40 Today (5-1) 79 Tone length (7-6) 99 T9 text mode 42 U Unpacking 9 V Version (0-8) 110 Voice answer (6-3) 92 Voice dial (6-1) 88 Voice memo (6-2) 91 Voice message (3-2) 65 Volume, adjusting ring (7-1) 96 key (7-5) 99 142 143 V o i c e d a i l v i b r a t e m o d e S w i t c h t o t h e R e d a i l t h e l a s t c a l l j A d u s t t h e s p e a k e r v o u m e l b e e p l v o u m e j A d u s t t h e k e y l
S a y H o d
o r a n a m e o p e n t h e f o d e r l H o d l
t w i c e
o n t h e l e f t s i d e
d u r i n g a c o n v e r s a t i o n
i n S t a n d b y M o d e
o n t h e l e f t s i d e E n d a c a l l R e c e i v e a c a l l o r o p e n t h e p h o n e M a k e a c a l l P h o n e n u m b e r
S a v e a N u m b e r I B A S C O P E R A T I O N S i n f o r m a t i o n
S a v e t h e s e t t i n g s o r E d i t t o e n t e r
t o c h a n g e N a m e
N e x t
I f n e c e s s a r y
, N u m b e r
S a v e
S e l e c t
C a t e g o r y
S e l e c t
S C H
A 6 3 3 Q u c k i R e f e r e n c e C a r d 145 b r o w s e r L a u n c h t h e w e b P r e s s T a k e a p i c t u r e P r e s s
S e a r c h P h o n e b o o k P r e s s
O K o r 144 S p e e d d i a l l i n g d i a l
. l a s t d i g i t t o a u t o m a t i c a d e s i r e d n u m b e r
, h o l d i n g l l y E n t e r m e m o r y l o c a t i o n o f t h e e d o M r e w s n A l i a d e R o t u A d r a w r o F l l g n i t i a W l l a C a C e m T i M A N t e S t e S n o i s r e V s r e b m u N y c n e g r e m E k o o B e n o h P y c a v i r P e n o h P e c i o V r a e C l t e s e R
. e d o C e g n a h C e d o M k c o L
. 1 2 3 4 1 2 3 1 2 3 4 5 6 i e n h c a M r e w s n A o m e M e c i o V l i a D e c i o V l r e u d e h c S t s i L k s a T d a P o m e M m r a A l e m T i n w o D d l r o W t n u o C l r o t a u c l a C
1 2 3
1 2 3 4 5 6 7 s l o o T e c i o V
6 r e s i n a g r O
7 m e t s y S
e n o h P
2 y t i r u c e S
3 l l a C
1 s g n i t t e S
8 u n e M
R t e s e R i a d e m i t l u M u n e M
R s e m a G l m u b A o t o h P t e l l a W o t o h P s g n i t t e S a r e m a C
1 2 3 4
1 2 3 4 d l r o W R
9 s o t o h P
0 s u t a t S y r o m e M y r t n E d d A s p u o r G d n i F
s g s M e s a r E l s e t a p m e T l i a M e c i o V s g n i t t e S x o b t u O d e v a S e t i r W
x o b n I
y r o t s i H e s a r E n o i t a r u D l l a C d e v i e c e R d e s s i M d e l l i a D
1 2 3 4 5 l e m u o V r e g n R i
s e n o T r e g n R i
e n o T y e K s t r e A l a e r A e c i v r e S e m e h T u n e M r e p a p l l a W t h g r e n n a B i l k c a B k c o C l l a u D t e S D E L e c i v r e S e g a u g n a L
1 2 3 4 1 2 3 4 5 6 7 8
1 2 3 4 5 1 2 3 4 5 6 7 8 y d o e M l f f O
n O r e w o P k o o B e n o h P
1 s e g a s s e M
2 y r o t s i H l l a C
3 s d n u o S
4 l y a p s i D
5 Licensed by QUALCOMM Incorporated under one or more of the following Patents. U.S Patent No. 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 S N O I T C N U F U N E M F O T S I L
) y e k t f o s u n e M e h t s s e r p
, s s e c c a o T
u n e M n a M i 146
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-08-15 | 824.7 ~ 848.31 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-08-15
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
SCHA633
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** C******
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R**** O********
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single-Mode Cellular Phone (CDMA) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output is ERP. SAR compliance for body-worn operating configuration is based on a separation distance of 1.5 cm between the back of the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are Head: 1.44 W/kg: Body-worn: 0.757 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SAMSUNG ELECTRONICS CO., LTD.
|
||||
1 | Name |
N******** P****
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
n******@samsung.co..kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22.901(d) | 824.70000000 | 848.31000000 | 0.2280000 | 2.5000000000 ppm | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC