all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 651.27 KiB | ||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Internal Photos | |||||||
1 | Parts List/Tune Up Info | |||||||
1 | Test Report | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 651.27 KiB |
PORTABLE CELLULAR TELEPHONE SPH-A250 Users Manual ELECTRONICS
( 2 0 0 1 . 1 . 1 3 ) v e r s i o n D r a f t World Wide Web http://www.samsungmobile.com Printed in Korea Code No. : GH68-XXXXXA Basic. 2001/01. Rev.1.0 FCC RF EXPOSURE INFORMATION SAR Information & FCC ID Labeling In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations using the optional belt-clip/holster placed 0.7 inches (1.8cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.7 inches (1.8cm) must be maintained between the users body and the phone, including the antenna, whether extended or retracted. The use of third-party belt-clips/
holsters with no metallic components that provide the minimum separation distance of 0.7 inches (1.8cm) can be used to satisfy FCC RF exposure requirements. The use of non-tested accessories or other body-worn operations may not comply with FCC RF exposure requirements and should be avoided. Contact your local dealer for optional accessory items. Vehicle Mounted External Antenna (optional, if available.) A minimum separation distance of 7.9 inches (20cm) must be maintained Between a person and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC website at www.fcc.gov THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement know as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is XXXXX and when worn on the body, as described in this user guide, is XXXXX . (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). [Labeling Committee note: if applicable, if body-
worn SARs are required]. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. i ii The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID XXX XXXX. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com (see note).
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Note: The URL http://phonefacts.net may be used in place of http://www.wow-com for direct access to SAR information. Contents Your Phone Unpacking . 7 Phone Layout . 8 Display . 10 Backlight . 12 Service Light . 13 Getting Started Installing Battery . 14 Charging a Battery . 15 Switching the Phone On/Off . 18 Your Phones Modes . 19 Call Functions Making a Call . 21 Correcting the Number . 22 Ending a Call . 22 Emergency Dialing . 23 Prepend Dialing . 23 Redialing Last Number . 24 Speed Dialing from Phone Book Memory . 24 Pause Dialing . 26 Network Dialing . 28 Four-Digit Dialing . 29 Answering a Call . 30 Caller ID Display . 31 Viewing Missed Calls . 32 In-Use Menu Options . 33 Call Waiting . 34 Call Forwarding . 35 Three-Way Calling . 36 Using the Display Notepad . 37 Adjusting the Volume . 37 iii 1 Contents (continued...) Entering Text Changing Text Input Mode . 39 T9(English) Mode . 40 Alpha Mode . 43 Number Mode . 45 Symbol Mode . 45 Using the Menus Accessing a Menu Functions by Scrolling . 46 Accessing a Menu Functions by Using its Shortcut . 47 List of the Menu Functions . 48 Calls Outgoing (MENU 1.1) . 51 Incoming (MENU 1.2) . 52 Missed (MENU 1.3) . 53 Erase History (MENU 1.4) . 54 Air Time (MENU 1.5) . 54 Phone Book Find Name (MENU 2.1) . 55 Add New Entry (MENU 2.2) . 57 My Phone Number (MENU 2.3) . 59 Find Entry (MENU 2.4) . 59 Services (MENU 2.5) . 60 Messages Voicemail (MENU 3.1) . 62 Page/Text (MENU 3.2) . 63 Browser Messages (MENU 3.3) . 64 Erase (MENU 3.4) . 64 Roaming Set Mode (MENU 4.1) . 67 Call Guard (MENU 4.2) . 67 Calendar Today (MENU 5.1) . 68 Month View (MENU 5.2) . 69 Jump To Date (MENU 5.3) . 71 To Do List (MENU 5.4) . 72 Countdown (MENU 5.5) . 73 Alarm Clock (MENU 5.6) . 74 World Clock (MENU 5.7) . 76 MiniBrowser Launching the MiniBrowser . 78 Exiting the MiniBrowser . 79 Using the Soft Keys . 79 Navigating the MiniBrowser . 79 Entering Text, Numbers or Symbols . 81 Using the Links . 81 Initializing a Call from the MiniBrowser . 82 Using Bookmarks . 82 Setup/Tool Sounds (MENU 7.1) . 84 Display (MENU 7.2) . 86 Data/Fax In (MENU 7.3) . 88 Security (MENU 7.4) . 89 Call Answer (MENU 7.5) . 92 Auto Answer (MENU 7.6) . 92 MiniBrowser (MENU 7.7) . 93 Language (MENU 7.8) . 93 Calculator (MENU 7.9) . 94 2 3 Reference Information Accessories . 95 Using the Batteries . 96 Precautions When Using Batteries . 96 Safety Information . 98 Road Safety . 98 Operating Environment . 98 Care and Maintenance . 100 Emergency Calls . 101 Glossary . 102 Index . 105 Quick Reference Card . 109 Safety Precautions and Important Notices Read these simple guidelines. Failure to comply with these guidelines may be dangerous or illegal. For more detailed safety information, see Safety Information on page xx. Road safety comes first Do not use a hand-held phone while driving; park the vehicle first. Remember that in some countries, it is illegal to use a hand-held phone while driving. Switch off when refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals. Switch off in aircraft Mobile phones can cause interference. Using them on aircraft is both illegal and dangerous. Switch off in hospital Follow any regulations or rules. Switch the phone off near medical equipment. Respect special regulations Follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital, for example). 4 5 SSaaffeettyy PPrreeccaauuttiioonnss Interference All mobile phone may be subject to radio interference, which may affect their performance. Use qualified service Only qualified service personnel must install or repair cellular equipment. Use sensibly Use only in the normal position (to ear). Do not touch the antenna unnecessarily when the phone is switched on. IMPORTANT! Use only accessories approved by the phone manufacturer. This apparatus is intended for use when supplied with power from SAMSUNG approved Travel adapter and Desktop charger. The use of any other types will invalidate any approval or warranty applying to the phone, and may be dangerous. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. Your Phone Unpacking Your package contains the following items. Handset Travel Charger Battery Hand Strap Users Manual In addition, you can obtain the accessories for your phone from your local SAMSUNG dealer. For information on the accessories, see page xx. 6 7 Your Phone Phone Layout The following illustrations shows the main elements of your phone. With the phone open Earpiece Display Navigation/
Hot key OK/Messages key End key Clear key Menu key Volume keys Talk key Ear-microphone jack D E F M N O W X Y Z e c a S p A B C J K L T U V N e x t G H I P Q R S S h i f t Alphanumeric keys Microphone YYoouurr PPhhoonnee Antenna Service Light With the phone close Keys Functions Enters the menu facility. Also, scrolls through the menu options. In the menu facility, confirms the selection and input. In Standby mode, enters the Message menu. In the menu facility, scrolls through the menu options and phone book memory, and selects a menu function or stores information that you have entered. In Standby mode, enters the following menus when pressed depending on the direction.
: Find Name in Phone Book
: Find Entry in Phone Book
: MiniBrowser
: Calendar 8 9 YYoouurr PPhhoonnee Keys Functions Makes or answers a call. In Standby mode, recalls the last number dialed. Deletes characters from the display. In the menu facility, returns to the previous menu level. Ends a call. Also switches the phone on and off when pressed and held. In the menu facility, returns to Standby mode and cancels your input.
Enters numbers, letters and some special characters. Use these keys for various purpose in different functions.
(on the side of the phone) In Standby mode, adjust the ringer volume. During a call, adjust the earpiece volume. YYoouurr PPhhoonnee Display The display comprises two areas: an upper line of static icons, and the lower text and graphic area. The following icons display at power-on:
Icons Text and graphic area Signal strength : Shows the received signal strength. The greater the number of bars, the better the signal strength. Service: Appears when a call is in progress. No service indicator: Appears when you are outside a service area. When it appears, you cannot make or receive calls. Wait a little while for a signal or move into an open area. Roaming: Appears When you are out of your home area and have registered with a different network (when travelling in other countries, for example). 10 11 YYoouurr PPhhoonnee YYoouurr PPhhoonnee Service light The service light is at the top right of the phone. It flashes to indicate incoming call or message. Also, the service light flashes for a few seconds when you turn on the phone. New Message: Appears when a new text message has been received. Analog mode: Indicates your phone is operating in analog mode. Vibrator on: Appears when a vibrate mode is on. An incoming call will vibrate the phone rather than ring it. Battery strength: Shows the level of your battery. The more bars you see, the more power you have left. Backlight The display and keypad are illuminated by a backlight. When you press any key, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Backlight option set in the Phone setting menu. The backlight remains on at all times when the phone is connected to a Hands-Free Car Kit (optional). To specify the length of time for which the backlight is active, set the Backlight menu option (Menu 7.2.1); see page xx for further details. 12 13 Getting Started Installing Battery To Install the Battery 1. Insert the tab on the base of the battery into the notches on the base of the phone, as shown. GGeettttiinngg SSttaarrtteedd To Remove the Battery 1. If necessary, switch off the phone by holding down
. 2. Press and hold the catch on the back of the phone
), then lift it away (
). 2. Push the battery down until it snaps into place. Charging a Battery Your phone is powered by a rechargeable Li-ion battery. A travel charger is provided with your phone. Use only Samsung-approved batteries and chargers. Ask you local SAMSUNG dealer for further details. The phone can be used while the battery is charging. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 180 minutes. 14 15 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd 1. With the battery in position on the phone, connect the lead from the travel charger to the jack on the bottom of the phone. 2. Plug the power cord of the charger into a standard wall outlet. 3. When charging finished (the indicator on the Low Battery Indicator When the battery charge level is almost empty and only a few minutes of talk time remain, an empty battery icon (no bars displayed) blinks in the upper right corner of the screen. You will hear a warning tone. S p r i n t P C S 1 : 4 5 P J U L 2 2 When the battery becomes too weak for the phone to operate, it switches off automatically. connector of the charger turns green), disconnect the charger from the power outlet and remove it from the phone by squeezing the two tabs on the lead(
) and unplug the lead (
). 16 17 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd Switching the Phone On/Off 1. Open the phone. 2. Press to switch the phone on. The service light of the phone flashes, and an alert sounds. When the system locates services, the greeting message displays along with the date and time. You can now place and receive calls. S p r i n t P C S 1 : 4 5 P J U L 2 2 If the phone is out of service, the icon appears in the display. In this case, you cannot place and receive calls. You can try again later when service is available. If your phone is locked, - Locked - displays.
, and enter the four-digit lock code to Press unlock the phone. 3. When you wish to switch the phone off, press and hold down begins to play. until the power off animation WARNING!
Do not switch on the phone when the mobile phone use is prohibited or when it may cause interference or danger. Note: Your phone has a built-in antenna. As with any other radio-transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Your Phones Modes Standby Mode Standby is the most basic state of your phone. The phone goes into Standby mode soon after you turn it on, or whenever you briefly press
. When your phone is in Standby mode, you will typically see the greeting message and current date and time. If you enter a phone number, you can press to dial it, to save it in the internal phone book. or press at any time to return to Standby mode. Be
, you Press careful; if you are on a call when you press will return to Standby mode, but it also disconnects the call. Press several times or hold it down to return to Standby mode without ending the call. 18 19 GGeettttiinngg SSttaarrtteedd Talk Mode You can place and answer calls only when your phone is turned on. During a call, the phone is in Talk mode. While you are in Talk mode, pressing gives you a list of options referred to as In-Use options. See page xx for details on the options. Power Save Mode Your phone comes with a Power Save feature that will automatically be activated if your phone is unable to find a signal after 15 minutes of searching. While this feature is active, the phones battery charge is conserved. The phone will automatically recheck for a signal periodically. To manually force the phone to recheck for a signal, press any key. A message on the display will let you know when your phone is operating in Power Save Mode. Call Functions Making a Call In Standby mode, enter the area code and phone number, and press . The phone places the call to the entered phone number. When entering the phone number, pressing allows you to access to the Dial options. Talk: dials the phone number. Save: allows you save the phone number you entered in the Phone Book. Find: allows you to find the phone number from the Phone Book or enables network dialing. For details on network dialing, see page xx. Hard Pause: allows you to enter a Hard pause. See page xx for details on pause dialing. 2sec Pause: allows you to enter a 2-second pause. See page xx for details on pause dialing. Notes:
When you enter the numbers used for memory location (1 through 229), Speed Dial option is available. See page xx for details on speed dialing. When you enter the four digits, 4-Digit Dial option is available.Using this option, you can find and dial the stored number using the four digits. See page xx for details on 4-digit dialing. 20 21 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Correcting the Number To clear... Then... The last digit displayed The whole display Press
. Hold down one second. for more than Ending a Call When you have finished your call, briefly press The call time (length of the call) displays with the name and number of the called party (if available). Or, close the phone. If the number is no stored in your Phone Book, your phone prompts you to save the number. Press to save the number. If you do nothing, the phone automatically returns to Standby mode after about ten seconds. Emergency Dialing You can place calls to 911, *911, #911 or one of the three numbers in your special number list even if your phone is locked. For more details on special numbers, see page xx. To dial emergency number in Lock mode, enter the desired one of the emergency numbers and press
. Prepend Dialing The Prepend option enables you to add up to three digits, such as area codes and network feature activation codes, to a phone number. You can prepend an existing entry in the Phone Book or Call Logs before dialing. To prepend existing phone numbers in the Phone Book or Call Logs:
1. Access the phone number entry. 2. When the desired phone number displays, press to access the options. 3. Press to select Prepend, or press or to scroll to the Prepend option and press the key. 4. Enter the area code or feature code. 5. When the correct number displays, press to dial the number. 22 23 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Redialing Last Number To redial the last number you called, press twice. The phone stores the last 10 numbers dialled. To recall any of these numbers, proceed as follows. 1. If there are any characters on the display, clear for more than the display by holding down one second. 2. Press to access the list of last-dialed number. 3. Press or to scroll through the Redial list until the required number is displayed. Then press to dial the number displayed. Speed Dialing from Phone Book Memory Once you have stored phone numbers in the phone book memory (001 through 229), you can dial them easily whenever you want. See page xx for details on storing phone numbers. One-Touch Dial Memory locations 001 through 009 are special one-
touch locations. Press and hold the last digit of the memory location containing the number to be dialed. For example: Location no. 009 Press and hold. The number (and name) stored is displayed, then dialed. Two-Touch Dial Memory locations 010 through 099 are special two-
touch locations. Press the second digit briefly, then hold down the third digit of the memory cell. For example: Location no. 023 Press briefly and hold down . The number (and name) stored is displayed, then dialed. Three-Touch Dial Memory locations 100 through 229 are special three-
touch locations. Press the first and the second digit briefly, then hold down the third digit of the memory cell. For example: Location no. 229 Press and briefly and hold down . The number (and name) stored is displayed, then dialed. Note: When several numbers are saved in one location, only the phone number which is specified with Set Speed Dial option will be automatically dialed(The first-saved number is automatically set as the speed dial number for the location.). For details, refer to Options under Phone Book menu on page xx. 24 25 CCaallll FFuunnccttiioonnss Pause Dialing When you call automated system, like banking services, you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Phone Book, separated by special characters called pauses. There are two kinds of pauses that can be entered on your phone:
Hard pause: A hard pause stops the dialing sequence until you press
. Two second pause: A two second pause stops the dialing sequence for two seconds and then automatically sends the remaining digits. Note: Multiple two second pauses can be entered to extend the length of a pause. For example, two consecutive two second pauses cause a total pause time of four seconds. However, keep in mind that pauses count as digits towards the 32 digit dialing maximum. Storing Pauses in a Phone Book Entry To store a number in your Phone Book that contains pauses:
1. Enter the phone number you want to store (such as the banks teleservice phone number). 2. Press
. The Dial options display. CCaallll FFuunnccttiioonnss 3. Press or to enter the desired pause. Press for Hard Pause. The letter p displays in the number, meaning that a hard pause will occur at that point in the dialing sequence. Press for 2sec Pause. The letter T displays in the number, meaning that a Timed pause will occur at that point in the dialing sequence. 4. Enter the digits that need to follow the pause
(such as your account number). 5. Store the number in your Phone Book as you normally would by pressing and following the screen prompts. Pause Dialing from a Stored Phone Book Entry 1. Dial the number from the Phone Book. 2. If you stored the number using a two second pause(s), your phone transmits the number that follows the T pause two seconds after connection. If you stored the number using a hard pause(s), wait for the appropriate prompt from the number you are calling (credit card number, back account number, etc.). When prompted, press to send the DTMF number that follows your hard pause. 3. SENDING DTMF flashed on the display and the transmitted tone sounds. 26 27 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Manual Pause Dialing You can enter pauses manually using the Dial options during the dialing process. 1. Enter the phone number of the service you want to call (such as a banks teleservice phone number). 2. Press to display the Dial options. 3. Press for Hard Pause. The phone displays a p meaning a hard pause. Enter the number to be sent after the pause and then press connecting, press additional number. again to transmit the
. After for 2sec Pause. The phone displays Press T meaning a timed pause. When prompted, Enter the number to be sent after the pause and then press
. The phone transmit the number that follows the pause two seconds after connection. Network Dialing (????) You can enter a short string of digits to to find network number which is used for the more than one phones (if supported by your provider) and dial. This feature enables you to call to multiple phone connected to a network at a time. 1. Dial the desired digits (1, 2, 3, or 4 digits). 2. Press to display the Dial options. 3. Press for the Find option. 4. Your phone finds the phone numbers containing the digits you entered or network number through the Phone Book memory. Press or to find the network number, and press to dial. Four-Digit Dialing This feature allows you to enter any four consecutive digits of a stored phone number, have your phone remember the rest of the number and then dial the entire number for you. This feature is convenient if you have the number memorized, but you have forgotten what Phone Book location the number is stored in. 1. Enter any four digits of a phone number that you have stored in Phone Book. 2. Press . The phone automatically dials the entire number. You can also press , scroll to 4-Digit Dial by pressing or . Note: If your Phone Book has more than one phone number stored that contains the four digits, Wait displays and all numbers containing those four digits will be listed. Scroll through the listed phone numbers using to select the desired number. 28 29 CCaallll FFuunnccttiioonnss Answering a Call When somebody calls you, the phone rings and the phone icon in the middle of the screen flashes. nnnn
(( )) Callers name or number If the caller can be identified, the callers phone number (or name if stored in your phone book) is displayed. If the caller cannot be identified, only the phone icon flashes. 1. To answer a call, press if the phone is already open. If the the Call Answer menu (Menu 7.5) is set to Open(???), you can answer a call simply by opening the phone. If the the Call Answer menu is set to Any Key, you can answer a call by pressing any key except
. For details on the Call Answer menu, refer to page xx. 2. End the call by closing the phone or pressing
. Note: You can answer a call while using the Phone Book or menu features. Your setting will be canceled. CCaallll FFuunnccttiioonnss Caller ID Display This feature tells you who is calling you by displaying the callers number when the phone rings. If a callers name and number are stored in your Phone Book, the corresponding name is also displayed. If you call someone who has this feature, your phone number will be displayed on the other partys phone. Note: You may need to contact your service provider to setup the Caller ID service. To block your phone number from being displayed for a particular outgoing call, just follow these steps:
1. Press
. 2. Enter the phone number, and then press
. To activate the Block Own Number feature permanently, call customer care by pressing ,
, . To temporarily unblock the number;
1. Press
. 2. Enter the phone number, and then press
. 30 31 CCaallll FFuunnccttiioonnss Viewing Missed Calls Your phone keeps a list of calls that you do not answer when the phone is on and service is available. The phone indicates a missed call by displaying a text notification on the screen. Additionally, if caller information is available, a Missed Call Log entry is created, and the screen displays the phone number of the most recent missed call. Press to call the displayed number, or to save the number in Phone Book. To view the missed calls, refer to Missed (Menu 1.3) on page xx. Dropped Calls A dropped call can occur during a conversation in response to a signal fade or leaving a service area. In this case, the call ends and Signal Faded displays. Press Standby mode. to clear the message and return to Failed Calls A failed call can occur if your phone is out of calling range or the network is temporarily busy. Your phone responds to a failed call by displaying an appropriate message: Call Failed Out of Range or Call Failed Network Busy. Press Standby mode. to clear the message and return to CCaallll FFuunnccttiioonnss In-Use Menu Options Your phone provides a number of functions that you can use during a call. You cannot utilize all of these functions at all times. Many of the In-Use Menu Options are network services. during a call to choose some or all of the Press following In-Use Menu options:
(Un)Mute: allows you to switch your phones microphone off, so that the other party cannot hear you. Example: You wish to say something to another person in the room but do not want the other party to hear you. 3-Way Call: allows you to conduct conference calls with two separate parties at the same time. Refer to page xx for more details. Calls: allows you to access the Calls menu (Menu 1). Messages: allows you to access the Messages menu (Menu 3). Phone Book: allows you to access the Phone Book menu (Menu 2). Calendar: allows you to access the Calendar menu
(Menu 5). 32 33 CCaallll FFuunnccttiioonnss Call Waiting This feature allows you to receive a second call during conversation. When a waiting call comes, the incoming call alert sounds, when set, and a text notification displays. Contact your service provider to activate the Call Waiting feature. To answer a Call Waiting call:
1. To answer the call, Press
. The phone connects the calling party, and places the current party on hold. 2. Press again to switch between two parties. Note: If you do not respond to a Call Waiting notification, the phone logs the call in the Missed Calls Log and then sends the call to Voicemail. To disable Call Waiting on your next call:
Press , , before dialing the number. When you complete your call and hang up, the Call Waiting feature automatically turns back on. CCaallll FFuunnccttiioonnss Call Forwarding This feature allows you to forward all of your incoming calls to another phone number, even if your phone is switched off. When Call Forwarding is used, you can still make calls from your phone. Contact your service provider to activate the Call Forwarding feature. To use Call Forwarding:
1. Press , , . 2. Enter the phone number (1 + area code + phon number) to which your calls should be forwarded. 3. Press . You will hear a tone (or message) that confirms youve enabled Call Waiting. To disable Call Forwarding:
Press , , , , . Once again you will hear a tone (or message) that confirms Call Waiting is disabled. 34 35 CCaallll FFuunnccttiioonnss Three-Way Calling This feature allows you to talk with two different person at the same time. You will be charged normal air time rates for each of the two calls and your phone records each called party in the Outgoing Call log. Contact your service provider to activate the Three-Way Calling feature. During a three-way call, if one of the callers hangs up, you and the remaining caller will stay connected. If you initiated the call and you hang up first, all three parties are disconnected. 1. During a conversation, press places the other party on hold. The phone You can also press Calling using and scroll to Three-Way or . 2. Enter the phone number for the third party, and then press again. 3. When the third party answers, press again to begin your three-way call. CCaallll FFuunnccttiioonnss Using the Display Notepad Your phone has a really convenient feature for entering a phone number while on a call as if it were a note pad. Say you are talking to a friend who wants to give you a phone number. Just enter the number using the keypad, and the number appears on the display. Then, when you hang up, the number remains in the display so that you can press to be immediately connected to that party, or press and follow the prompts to store the number into your phone book. Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the volume keys on the left side of the phone. Press to decrease the volume. to increase and 36 In Standby mode, you can adjust the ringer volume using these keys. You can set ringer to Off, Vibrate, One Beep, Low, Med or High. For details on the ringer volume, see page xx. 37 Entering Text When using your phone, you will need to enter text at many times. For example, when storing a name in the Phone Book, creating your personal greeting or scheduling events in your calendar. You can enter alphanumeric characters into your phone by using your phones keypad. You are provided with the following text input modes;
T9(English): This mode allows you to enter English words with only one keypress per letter. Each key on a keypad has more than one letter - a single press on could be J,K or L. The T9(English) mode automatically compares your key presses to an internal linguistic database to determine the correct word. The T9(English) mode requires far fewer keystrokes than the traditional multi-tap method, Alpha mode. Alpha: This mode allows you to enter letters by pressing the key labeled with the desired letter once, twice, or three times until the letter appears on the display. Symbol: This mode allows you to enter special characters. Number: This mode allows you to enter numbers. EEnntteerriinngg TTeexxtt Changing Text Input Mode When you are in a field that allows characters entry, you should notice the text input mode indicator in the lower right corner of the display. E n t e r N a m e OK : Save WORD Text mode indicator You can change between T9(English) and Alpha mode to enter words. To include a symbol or number(s) between characters, Symbol and Number modes are also available. To change to another text input mode;
1. Press
. Input Mode ii mm 1: T9(English) 2: Alpha 3: Symbol 4: Number 2. Scroll to the desired mode by pressing or
. 38 39 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt 3. To select the mode highlighted, press
. 4. You will find the selected text input mode indicator in the bottom right corner of the display:
T9(English) mode T9WORD, T9Word, or T9word ABC, Abc, or abc Alpha mode Number mode If you select Symbol mode, symbol input screen 123 appears. Directions for using each of the text input modes appear later in this section. Note: If you want to exit the menu without changing to a new mode, press
. T9(English) Mode To type a word, press keys corresponding to the letters you need. Remember the following as you are typing:
1. Press keys on the handset just once per desired letter. For example, to enter hello, press ,
, , , . 2. The word you are typing appears in the display. It may change with each key press. 3. Type to the end of the word before editing or deleting any keystrokes. 4. Complete each word with a space by pressing
. 40 If the word that appears in the display is not the word that you desire, press to display alternate word choices for the keys you have typed. (For example, of and me both shares the sequence
, . The phone displays the most commonly used choice first.) one or more times To type words not found in the T9 mode, change the text input mode to Alpha mode. Word typed in Alpha mode are automatically added to the T9 dictionary so you can type them using T9(English) mode the next time. Smart Punctuations Period, hyphen, and apostrophe are available on
. T9 applies rules of grammar to insert the correct punctuation. Notice that is used twice in this example to display two punctuation marks:
l e t s e a t . Including a Number You can include a number between letters without exiting the T9 input mode. Press and hold the desired number key. 41 EEnntteerriinngg TTeexxtt Changing Case Your phone offers three shift states;
Word (initial letter is capitalized) WORD (all letters capitalized) word (all letters lower case) Press appropriate shift indicator, and begin typing normally. one or more times to display the Enter Name TREND OK : Save WORD Shift indicator Scrolling To move the cursor left or right through your text message, press or . To move the cursor up or down through your text message, press or . To scroll through alternate word choices for the keys you have entered, press
. Clearing Letters and Words Press left. Press and hold one or more times to clear letters to the to erase the whole words. 42 EEnntteerriinngg TTeexxtt Alpha Mode When typing in Alpha mode, you should press key labeled with the required letter:
-Once for the first letter
-Twice for the second letter
-And so on. For example, you press display the letter C , display the letter K. So, this method is called Multi-tap typing. three times quickly to two times quickly to Refer to the table on next page for the list of characters assigned on each key. List of characters available:
Key Characters in the Order Displayed
, C F I L O R V Y 2 3 4 5 6 S 8 Z
. 1 B A E D H G J K M N Q P T U W X 0
7 9
(Caps Lock mode) 43 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt To shift the case of the next letter(s) that you type, press one or more times. There are three shift states: Lower Case is indicated by abc in the right corner of the display, Initial Capital is Abc, and Capitals Lock is ABC. The cursor moves to the right when you press a different key. When entering the same letter twice
(or a different letter on the same key), just wait for a few seconds for the cursor to move right automatically, and then select the next letter. If you enter a specific word in this mode the first time, the word is automatically added to your phones database, and offers the new word as an option for its keystroke sequence when you are in the T9 mode. Press to insert a space. To move the cursor left or right through your text message, press or . To move the cursor left or right through your text message, press or . Press one or more times to clear letters to the left. Press and hold to erase the whole words. Symbol Mode Symbol mode enables you enter symbols into a text message. Set1 123456789
, . - ? :@() Select number
> : Next Press or to display more symbols in Set 2 or Set 3. Press keys corresponding to the desired mark, then the phone automatically switches back to the text entry mode used just prior to selecting the Symbol mode. Number Mode Number mode enables you to enter numbers into a text message. Press keys corresponding to the desired digits, and manually switch back to text entry mode of choice. 44 45 Using the Menus The phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and submenus. The menus and submenus can be accessed by scrolling or using the shortcuts. Accessing a Menu Functions by Scrolling 1. In Standby mode, press to access the menu facility. Scroll to the desired main menu, e.g. Setup/Tool, by pressing or . Press to enter the selected menu. 2. If the menu contains any submenus: for example, Display, scroll to find the one you want by pressing or . Press to enter the submenu. If the menu you have selected contains submenus, repeat this step. 3. Press or to scroll to the setting of your choice. Press to confirm the chosen setting. UUssiinngg tthhee MMeennuuss Accessing a Menu Functions by Using its Shortcut The menu items (menu, submenus and setting options) are numbered and can be accessed quickly by using their shortcut number. 1. In Standby mode, press
. 2. Within three seconds, key in the first digit of the shortcut number. Repeat this for each digit of the shortcut number. Example: Accessing the Contrast menu Press , and key in , , . MENU for entering the menu facility, 8 for Setup/Tool, 2 for Display, 3 for Contrast. 3. Press or to scroll to the desired setting, and press to confirm the chosen setting. Note: The numbers assigned to each menu function are indicated on the list on page xx. Notes:
You can return the previous menu level by pressing You can exit the menu without changing the menu settings by pressing
. 46 47 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss List of the Menu Functions The list shows the menu structure available and indicates the:
Number assigned to each option Page on which you can find a description of each Page xx Page xx feature 1. Calls 1-1: Outgoing 1-2: Incoming 1-3: Missed 1-4: Erase History 1-4-1: Outgoing 1-4-2: Incoming 1-4-3: Missed 1-4-4: All Calls 1-5: Air Time 1-5-1: Last Call 1-5-2: Total 1-5-3: EraseTotal 1-5-4: Lifetime 2. Phone Book 2-1: Find Name 2-2: Add New Entry 2-3: My Phone#
2-4: Find Entry 2-5: Services 2-5-1: Customer Care 2-5-2: Dir Assist 2-5-3: Prepaid SVC 2-5-4: Road Assist 3. Messages 3-1: Voicemail Page xx 3-1-1: Listen 3-1-2: Reset 3-2: Page/Text 3-3: Browser Msg 3-4: Erase 3-4-1: Page/Text 3-4-2: BrowserMsg Page xx Page xx 4. Roaming 4-1: Set Mode 4-2: Call Guard 5. Calendar 5-1: Today 5-2: Month View 5-3: Jump To Date 5-4: To Do List 5-5: Countdown 5-6: Alarm Clock 5-7: World Clock 6. MiniBrowser Page xx 48 49 UUssiinngg tthhee MMeennuuss 7. Setup/Tool 7-1: Sounds 7-1-1: Ringer Volume 7-1-2: Ringer Type 7-1-3: Key Beep 7-1-4: Tone Length 7-1-5: Alerts 7-1-6: Roam Ringer 7-2: Display 7-2-1: Backlight 7-2-2: Greeting 7-2-3: Contrast 7-2-4: Version 7-3: Data/Fax In 7-4: Security 7-4-1: Lock Phone 7-4-2: Change Lock 7-4-3: Special #
7-4-4: ErasePhonebook 7-4-5: Reset Phone 7-5: Call Answer 7-6: Auto Answer 7-7: MiniBrowser 7-8: Language 7-9: Calculator Page xx Calls You can use the Calls menu to:
View and dial the last outgoing or incoming numbers. Erase the numbers in the Call log memory. View the duration of calls. Outgoing Menu 1.1 The phone stores up to 10 calls you dialed. When you access this menu, the list of outgoing calls are displayed. To... Select an entry Press... or Dial the selected entry View the date and time at which the call was dialed and use option features When you press , you can view the date/time stamp for the selected entry. If there is a Phone Book match, the name displays. to access Options. The following options Press are available:
Talk: dials the selected number. 50 51 Missed CCaallllss Menu 1.3 Your phone keeps a list of 10 calls placed to your phone that you did not answer. The phone indicates missed calls by displaying a text notification on the screen. Press... or To... Select an entry Dial the selected entry View the date and time at which the call was dialed and use option features When you press , you can view the date/time stamp for the selected entry. If there is a Phone Book match, the name displays. Press to access the Options. For further details on the options, refer to Outgoing on page xx. CCaallllss Show Entry (or Save if the phone number is not currently stored in the Phone Book):
shows Phone Book entry or stores the number in the Phone Book. Prepend: allows to add an area code or feature code to the number before calling or saving the number. Incoming Menu 1.2 This option lets you view the last 10 calls placed to your phone. When you access this menu, the list of incoming calls are displayed. To... Select an entry Press... or Dial the selected entry View the date and time at which the call was received and use option features When you press , you can view the date/time stamp for the selected entry. If there is a Phone Book match, the name displays. Press on the options, refer to Outgoing on page xx. to access the Options. For further details 52 53 CCaallllss Erase History Menu 1.4 Phone Book You can erase the entries stored in each of the three Call Logs or all three logs at once. Outgoing: The calls you made are erased. Incoming: The calls you received are erased. Missed: The calls you missed are erased. All Calls: All calls you made, received and missed are erased. Air Time Menu 1.5 Your phone records the amount of airtime (or talk time) used. Using this option, you can view the number of the calls to or from your phone, and the airtime for all calls. You can easily erase the airtime measurement at any time. Last: shows airtime of the last call. Total: shows total duration of all calls made to or from your phone since the call time counter was lastly set to zero by using the Erase Total option. Erase Total: erases the Total airtime measurement and resets the call time counter. Lifetime: shows total duration of all calls made to or from your phone since the phone was shipped from the factory. The Phone book allows you to store frequently used phone numbers and the associated names in your personal directory to make it easy for you to make a call without having to remember or enter the phone number. You can store up to 229 numbers. Find Name Menu 2.1 This option displays the stored names in the Phone Book by alphabetical order. Note: You can locate Phone Book entries quickly when the phone is in Standby mode. Press to access the Find Name menu in one step. 1. Press or to scroll to the desired name. You can also enter the first character(s) of the name by pressing the associated alphanumeric key(s). Using this method, the phone searches for the names in the list beginning with that character(s), and then displays the first name in that section of the list. 2. When the desired entry displays, press to place a call, or to display the name with the number, label and speed dial number. 54 55 PPhhoonnee BBooookk Note: If more than one numbers are stored by the different labels in the selected location, you can see the and symbols on both sides of the label. Press or to scroll to the desired number. With an entry selected, if you press , you can access the following options:
Talk: dials the number. Add Phone#: allows you to add several different kind of numbers into the name, such as work office number or mobile number. Edit: allows you to edit phone number, name, or entry number. Set Secret option prevents a number and name from being displayed. When you have made the number secret, only a person with your phones lock code can view the number and name. Set Speed Dial option allows you set manually the number to be dialed by one touch (or two touch or three touch) of the entry number key(s). Prepend: prepends the number to add an area code or feature code to the number before dialing. Erase: erases the number. Name Ringer: allows you to designate a unique tone to signal an incoming call by the number. 56 Add New Entry PPhhoonnee BBooookk Menu 2.2 This menu allows you to store a number with a name in your Phone Book. You can save a persons different kinds of numbers, such as workplace number, mobile number and fax number, into one entry. Using this feature, you can keep ones information together. It also helps you to find numbers easily in Phone Book. Creating a New Entry 1. Enter a phone number and press . If you want to enter a hard or two second pause, press to enter the desired pause. See page xx for details on pause dialing.
, then or 2. You are asked to select a label. The following labels are available: Home, Work, Mobile, Pager, Fax, No Label. After selecting a label using or , press . 3. The phone prompts for a name. Press to confirm <Add new name>. 4. Enter the desired name, then press . You can enter up to 12 characters for a name. For information on how to enter text, see page xx. 5. The first available location displays. To accept the displayed location, press . To select another location, enter the location number using the numeric keys or press or to scroll to the desired location. 6. Press . 57 PPhhoonnee BBooookk Adding a Number in an Existing Entry You can store more than one numbers in one Phone Book location labeling each of the numbers. 1. Enter a number and press . 2. You are asked to select a label. The following labels are available: Home, Work, Mobile, Pager, Fax, No Label. After selecting a label, press . Note: You can only use each label one time for each stored name. For example, you can only have one number labeled Work for a name entry. 3. At the Name? prompt, press or to scroll to the Phone Book entry that you are adding a number to, then press to store the new number. 4. The number and its information are displayed. Storing Phone Numbers at Call End To store a phone number at your call end:
1. Press to end the call. The call time and the phone number display. 2. To store the phone number, press . 3. To complete storing the number, follow the instructions in Creating a New Entry. My Phone Number PPhhoonnee BBooookk Menu 2.3 The phone number of your phone displays every time you turn on your phone. At other times, you can display your phone number using this menu. Find Entry Menu 2.4 This option allows you to find an entry by location number. Note: You can locate Phone Book entries quickly when the phone is in Standby mode. Press to access the Find Entry menu in one step. 1. Enter the location by pressing the number keys or press or to scroll to the desired location. 2. When the desired entry displays, press to place a call, or to display the name with the number, label and speed dial number. If you press , you can access the options. For details on Options, refer to Find Name on page xx. Note: If more than one numbers are stored by the different labels in the selected location, you can see the and symbols on both sides of the label. Press or to scroll to the desired number. 58 59 PPhhoonnee BBooookk Services Menu 2.5 Messages Phone numbers for frequently used services are pre-
programmed into your phone. Customer Care: Sprint PCS customer care
( + ) Dir Assist : Directory Assistance
( + + ) Prepaid SVC: Prepaid Calling Service
( + + + ) Road Assist: Roadside Assistance
( + + + + ) Your phone receives voicemail, page/text messages, and MiniBrowser messages. When the phone receives a message, an alert sounds, and a text notification displays with the message indicator, the icon. The icon remains on the screen until you read the text messages or until you listen to the voicemail notification messages. You phone can receive incoming messages in both Standby mode and Talk mode. The messages are received even when the phone is locked. If this happens, the time and date of the message displays, but you can access the message. To review the message, you must unlock the phone. Your phone can store up to 99 messages, depending on the length of the messages. If the message memory is full, an error message is displayed and you cannot receive any new message until you erase the stored messages. Message Ringing When your receive a message in Standby mode, the ringer sounds with the message New Voicemail
(Text, Page or BrowserMsg) in the display. If you are on a call and receive a message, the phone automatically mutes the ringer and provides the call waiting tone (this is to avoid ringing in your ear while you are trying to talk) with a message header . You can set a unique ring type for each type of incoming message; voicemail, numeric page, text, or MiniBrowser. See the Ring Type menu on page xx. 60 61 MM ee ss ss aa gg ee ss Voicemail Menu 3.1 Note: Contact your serve provider for information on setting up your voicemail service. This menu allows you to listen to the voicemail messages and reset the counter for the voicemail messages, if desired. If you have new voicemail message(s), the screen displays Voicemail New, the time, date and the number of new messages. Listen: You can listen to the voicemail. Reset: The voicemail system should automatically icon after you have listened to clear the all new voicemail messages.If the icon is not automatically cleared (that is, reset), you can clear the icon manually using this option. One-Touch Access to Your Voicemail Box You can quickly access to your voicemail box by pressing and holding down . However, you must perform a simple setup procedure in order for the this feature to work. Do as follows:
1. In Standby mode, enter the number that will dial your voicemail service. This number is determined by your voicemail provider, but normally it is your phone number, or your phone number with # in front of it. MM ee ss ss aa gg ee ss 2. Once you have entered in the correct number and it appears on the screen, press . The phone prompts with the next available phone book location. 3. IMPORTANT-Press , , to enter in 229. The phone displays Entry # 229 will be used. 4. Press . The phone prompts you for the name. Enter whatever you like and press . Youve now stored your voicemail access number into memory location 229. From now on, when you press and hold , your phone will connect to your voicemail box. Note: Do not store any other location into memory location 229, or this one-touch access feature will no longer work. Page/Text Menu 3.2 An indexed list of page or text messages you received. An exclamation point next to an entry indicates an urgent message. A check mark next to an entry indicates that you have read and stored the message. Select the message to review, then press . 62 63 Erase MM ee ss ss aa gg ee ss Menu 3.4 You can erase all messages after reviewing. Page/Text: allows you to erase all page/text messages. Browser Msg: allows you to erase all MiniBrowser messages. MM ee ss ss aa gg ee ss After reviewing the message, press to access the following options. Talk: makes a call to the sender of the message. Save: allows you to save the senders phone number in your Phone Book if there is no Phone Book match. Erase: erases the message. Next Msg: reviews the next message. Prev Msg: reviews the previous message. Note: If the message you are reviewing contains a phone number that is already stored in the Phone Book, the Save option does not display, and the available menu options will be: Talk, Erase, Next Msg, Prev Msg. Browser Messages Menu 3.3 Selecting this menu launches the MiniBrowser. After connected to network, an indexed list of MiniBrowser messages displays. An exclamation point next to an entry indicates an urgent message. A check mark next to an entry indicates that you have read and stored the message. Select the message to review, then press . After reviewing the message, press to access the options. For details on Options, see above. 64 65 Roaming Your phone allows you to control your phones roaming ability. Roaming is a feature which is only relevant in areas where there are at least two cellular service providers having valid roaming agreements. Roaming allows you to register your phone on one of the networks, but use the facilities of the other if your own network is not available. This system priority feature allows you to program your phone for optimum operation when within your home service area or when outside your home service area. You should always check your phones display because it will let you know when youre outside the Sprint PCS Network and whether your phone is operating in analog cellular or digital mode. Spring PCS Network : No icons display Other CDMA Networks: The Analog Cellular Networks: The icon displays icon and icon display. Note: Always dial using 11 digits (area code +
number) when calling from outside your Sprint PCS Home Service Area. Set mode RR oo aa mm ii nn gg Menu 4.1 This menu allows you to set the desired service mode. The three roaming mode are available:
Automatic: The phone will search for digital service first. If digital service is not available, it will search for analog service automatically. SPRINT PCS: The phone will not roam out side of your home service area. Analog: The phone operates and roams in Analog mode only. The icon displays. Call Guard Menu 4.2 Using this menu, you can set the phone display a message when a roaming call is about to be placed or received. Selecting Yes turns this feature on. Selecting No turns this feature off. 66 67 Calendar The Calendar feature enables you to:
Write down todays event View the calendar and organize your schedule Create a list of things to do Set and count D-Day Set an alarm clock Check the current time for 24 major cities around the world Note: You can quickly access this menu by pressing in Standby mode. Today Menu 5.1 You can schedule up to 9 events for the current day indicating each events start and end time. You can even have your phone's calendar alert you before an event is to start. Events scheduled for future dates automatically appear on your Today events schedule on that day. Scheduling an Event 1. If there is no event, you are asked to write a new
. For details event. Enter an event, then press on entering a text, refer to page xx. 2. Enter the start time and date of the event, then press
. 3. Enter the end time and date of the event, then press
. 68 CCaalleennddaarr 4. You are asked to set an alarm. You are provided several time options; 10 minutes Before, On time, 1 hour Before, 30 minutes Before. Selecting No Alarm does not trigger an alarm. After selecting an option, press
. 5. The display shows the entered information. Adding, Editing, or Deleting an Event When a stored event is displayed, press access the following Options. to New Event: allows you to add an event on today. Edit Event: allows you to edit the todays event. Erase Event: allows you to delete the event. Exit: allows you to exit the Options. After you select an option by pressing or , press the key. Then follow the screen prompt. Month View Menu 5.2 This option allows you to view in calendar format the current month, or a past of future month. In this option, the current date is highlighted on the calendar. Days with the scheduled events are underlined. You can move up or down the Calendar by one week by pressing or . You can move right or left one day by pressing or . To display the next or previous month, press or on the left side of the phone. 69 CCaalleennddaarr CCaalleennddaarr Writing a New Memo Adding, Editing, or Deleting a Memo To write or edit a memo on a specific date, proceed as follows. 1. Scroll to the desired date in the calendar by using
. Note: To skip to the previous or next month, press or on the left side of the phone. 2. Press to confirm the selected date. 3. Enter a new event, then press . For more details on entering text, see page xx. 4. Enter the start time and date of the event, then press to confirm. 5. Enter the end time and date of the event, then press to confirm. 6. You are asked to set an alarm. You are provided several time options; 10 minutes Before, On time, 1 hour Before, 30 minutes Before. Selecting No Alarm does not set the alarm. After selecting an option, press
. 7. The display shows the entered information. to When a stored memo is displayed, press access the following Options. New Event: allows you to create a memo. Edit Event: allows you to edit the memo. Erase Event: allows you to delete the memo. Exit: allows you to exit the Options. After you select an option, press the screen prompt. Then follow Jump To Date Menu 5.3 This menu allows you to specify the calendar date you want to view. When you enter a date and press , the calendar is displayed and the date you entered is highlighted. Then you can consult the calendar and view the dates event to edit or erase it, if any, or create a new event. For details on writing, editing or erasing a memo, refer to Month View on page xx. 70 71 CCaalleennddaarr To Do List Menu 5.4 Countdown CCaalleennddaarr Menu 5.5 This feature allows you to:
Draw up a list of tasks to be done Assign a priority and deadline to each task Sort the tasks by priority Creating the To Do List Item 1. Enter a task, then press . You can enter up to 32 characters. For further details on how to enter characters, see page xx. 2. Enter a desired date and time by when the task has to be done, then press
. 3. Set the priority for a To do list item by pressing or . You can select High or Low. 4. Press to save the To Do List item. Adding, Editing and Erasing an To Do Item If a task is already defined in the To Do List, it is displayed when you select the To Do List menu option (5.4). Press to access Options. The following options are available. New Item: allows you to create a new task. Edit Item: allows you to edit the task. Erase Item: allows you to delete the task. Exit: allows you to exit the Options. Select an option, and press screen prompt. 72
. Then follow the This menu help you know how much time it takes you to do something, or how many months, days, hours and minutes until a specific day. You can create up to 5 Count down timers using this menu. Creating a Countdown timer item 1. When the defined Countdown item is displayed, press . The Options list displays. 2. Select New Item and press . 3. Enter a name for your new Countdown item and press . For details on entering text, see page xx. 4. Enter the date and time that you want to count down to or from. Notes:
Press or toggle between AM and PM. You can enter for dates up to 2099. on the left side of the phone to 5. Press to save the item. 73 CCaalleennddaarr CCaalleennddaarr Adding, Editing and Erasing a Countdown Item Setting an alarm When you select this menu, the defined Countdown item is displayed. Then press Options. to access the Note: If there are more than one items defined in the menu, scroll to the desired item by pressing or , and press . The following options are available. New Item: allows you to create a new item. Edit Item: allows you to edit the item. Erase Item: allows you to delete the item. Exit: allows you to exit the Options. Select an option, and press screen prompt. Then follow the Alarm Clock Menu 5.6 You can set an alarm to sound at a specific time.You set three alarms. Each alarm can be set to go off one time of to go off daily at a time that you have programmed. Keep in mind that if your phone is off at the alarm set time, the alarm will not sound. Note: In order for the alarm to work, the phone must be on, and you must be in a service area or another providers service area where a current time service is available. 1. Choose the alarm frequency option, press . Daily: the alarm rings every day at the same time. No Repeat: the alarm rings only once and is then deactivated. 2. Enter the required time and date (if applicable). Note that date setting is unavailable for a Daily alarm. Note: Press or phone to toggle between AM and PM. on the left side of the 3. Press to save the setting. Adding, Editing and Erasing an Item If you select the alarm already set and press following Options are displayed;
, the Edit: allows you to edit the alarm. Erase: allows you to release the alarm. Exit: allows you to exit the Alarm Clock menu. Select an option, and press screen prompt. Then follow the To stop the alarm when it rings, simply open the flip cover or press . 74 75 CCaalleennddaarr World Clock Menu 5.7 MiniBrowser This menu tells you what time it is in 24 different time zones around the world. Use to find the current time in one of the following 24 time zones. Time zones are identified by one or more major cities, states, regions or countries in a time zone. San Francisco Paris, Berlin Guam, Sydney Caracas Tashkent Honolulu, Hawaii London, Madrid Seoul, Tokyo New York, D.C Abu Dabi Samoa, Midway Cape Verde Hong Kong, Beijing Chicago, Mexico Moscow Wellington Mid Atlantic Bankok, Jakarta Denver, Arizona Athens, Helsink Okhotsk Buenos Aires Alma-ata Alaska The MiniBrowser allows you to access certain information such as stock quotes and weather via the Internet. Browsing the web via the phone is not like using your home computer. Site providers have selected only the critical aspects of their site to present to wireless phone users, and have removed most graphics. Each time you start the MiniBrowser, the phone will connect to the PCS Nationwide Network as necessary, and the service indicator icon (
appear on the display. Any time the service indicator icon is visible on the display, your phone is connected to the PCS Nationwide Network and you will be billed accordingly. Rates will vary according to your billing plan.
) will The MiniBrowser will end the connection after a certain period of network inactivity and will automatically re-connect as necessary. For this reason, you may find that you are billed for several network connections within a single MiniBrowser session. This is normal and is designed to minimize your bill. 76 77 MMiinniiBBrroowwsseerr MMiinniiBBrroowwsseerr Launching the MiniBrowser Selecting the MiniBrowser menu starts the MiniBrowser. Note: The first time you use the MiniBrowser, you will go through a security setup process that takes 3 to 5 minutes. Please follow the on-screen prompts to complete the security setup process. This initial setup process occurs only the first time you access the service. 1. When our phone access the MiniBrowser network, a reminder of the charge will appear. Answer YES or NO by pressing or respectively. 2. Once connected, the Home page (or the last page visited) will be displayed. To access the Home menu page from any other menu in the MiniBrowser, press and hold . An example of a Home Page is shown below:
Yahoo !
Weather Portfolio More Internet 3. What appears on the display when accessing the MiniBrowser is dependent on the service provider content. To view additional text, use or . Note: You can quickly access this menu by pressing in Standby mode. Exiting the MiniBrowser Simply press to exit the MiniBrowser. If the Prompt to end or Prompt both option is set in the MiniBrowser Setup (Menu 7.7 ) , you will be prompted whether you want to end the browser call. Using the Soft Keys At the bottom of the MiniBrowser display is a solid bar which contains browser commands. and below the solid bar are used to execute the commands. These two keys are called Soft keys because their function changes depending on where you are in the MiniBrowser software. Navigating the MiniBrowser When you use the MiniBrowser, some keys on your phone operate differently than on a normal phone call. These keys are explained below. The MiniBrowser presents on-screen items in one of the following ways:
Text or numeric input Links (embedded in content) Numbered options (some options may not be numbered) Simple text 78 79 MMiinniiBBrroowwsseerr MMiinniiBBrroowwsseerr You can act on the options or links by making use of the soft keys. The soft keys ( and ) are located below the bottom line of the display. Heres how the keys work in the MiniBrowser:
Use to scroll through the browser options. The currently selected option is indicated by
. This is the right soft key. For more information, see Using the Soft Keys on page xx. Also, this key is used primarily for secondary options or a menu of secondary options. This is the left soft key. For more information, see Using the Soft Keys on page xx. Also, this key is used primarily to confirm your selection. Backs you up in the browser. Pressing it once backs you up one page. Pressing and holding it backs you up to the Home page. Clears out entered text or numbers. When entering numbers or text, press this key to clear the last number, letter, or symbol. Press and hold the key to completely clear the input field. Use to exit the MiniBrowser and return the phone to Standby mode.
If the items on a page are numbered, you can use these keys to select them. This is the right cursor key: Moves the cursor right in a text entry. This is the left cursor key: Moves the cursor left in a text entry. Allows you to scroll up or down by a page. Press and hold the up portion for one second to back up one level in the browser. Press and hold the down portion for one second to go to your home page. Entering Text, Numbers or Symbols When you are prompted to enter text, the current text entry method will appear on the right soft key as T9(English), Alpha, Symbol or Number. To change the input mode, use the right soft key. For details on entering text, see page xx. Using the Links Links have several purposes, including jumping to a different page, jumping to a different site, or even initiating a phone call from some sites. Links are shown inside of brackets ( [ ] ) , and you can normally press to select a link when it is highlighted. 80 81 MMiinniiBBrroowwsseerr MMiinniiBBrroowwsseerr 4. A message will appear confirming that the bookmark was added to the list. Select OK to return to the screen that you marked to resume navigation within the MiniBrowser. The new bookmark is added to the bottom of your bookmark list. To Find a Bookmark From the home page, select Bookmarks and select the bookmark you want by pressing or . Or, From the home page, press and hold the number associated with the bookmark in the bookmark list. Initializing a Call from the MiniBrowser You may initiate a phone call from the MiniBrowser if the site you are using supports this feature (the phone number may be highlighted and the left soft key will appear as Call.). In most cases, you can also use to call the number. The browser connection will be terminated when you initiate the call. After you end the call, your phone will return to the Standby mode. Using Bookmarks You can bookmark many individual pages for easy access at a later time. Bookmarks save you time by reducing the number of steps it takes to access a desired page. To Create a Bookmark 1. Go to the page that you want to mark, and press and hold . A list of options appears. 2. Select Mark Site. 3. If the page has a title, it will be automatically used for the name of the bookmark. You can also change the bookmark name. Selecting Save will save the name and add the page to your list of bookmarks. 82 83 Setup/Tool Many different features of your phone can be customized to suit your preferences. Sounds Menu 7.1 You are provided a variety of ringer options in the Sounds menu. These ringer options allow you to customize your ring and volume settings so that you can easily recognize when a certain type of call is coming in. Ringer Volume This option allows you to adjust the ringing volumes of calls, messages and alarm. You can set each volume to High, Med, or Low. Selecting Off does not sound the ring volume Selecting Vibrate switches the phone to vibration mode. In vibration mode, an incoming call vibrates the phone. Selecting 1-Beep sounds a beep. Ringer Type This option enables you to set a unique ring type for voice calls, messages, data/fax or alarms. SSeettuupp//TTooooll Voice Calls: allows you to set a unique ring type for incoming voice calls. Also, by selecting different tones, incoming voice calls which have caller ID can be distinguished from those that do not. Messages: allows you to have distinct ring types for voicemail notifications, text messages, numeric pages, and browser messages. Alarms: allows you to have distinct ring types for alarms. Data/Fax In: allows you to have distinct ring types for incoming data or fax. Key Beep This option allows you to adjust the tone volume that the keypad generates each time you press a key. Tone Length The tone length setting enables you to select short or long DTMF (dual-tone multi-frequency) tones. DTMF tones are what is send by your phone to access teleservices (such as a bank account). The system used by the bank or other service determines if you need short or long DTMF. If the service is digital (which most are these days), short DTMF will almost always works. However, some new systems and almost all older (analog) system require you to use long DTMF tones. 84 85 SSeettuupp//TTooooll SSeettuupp//TTooooll Alerts MinuteBeep: With this menu option set to ON, the phone sounds an alert 10 seconds before each elapsed minute to remind you of the length of the current call. Service: With this menu option set to ON, the phone beeps when the phone experiences a dropped call or a failed call or when the phone leaves or enters a service area. Roam Ringer This option enables you to select a unique ring type for incoming roaming calls. Press or to choose Distinctive or Normal. Each tone sounds as you scan the options. Display Menu 7.2 Backlight When the phone is attached to the optional Hands-
Free Car Kit, the backlight remains on (when the phone is on). At other times, you can select backlight options, but remember that backlight use drains your battery faster. The following options are available:
30 SECONDS: The backlight comes on when you press a key or receive a call and switches off 30 seconds after the last key is pressed. 8 SECONDS: The backlight comes on when you press a key or receive a call and switches off 8 seconds after the last key is pressed. Off: The backlight is not used. Always On: The backlight comes on each time you open the phone. Greeting You can create and display a 12-character personal greeting that displays in the Standby mode. Press and hold to erase the existing greeting. Enter your personal greeting by pressing the alphanumeric keys on the keypad, then press . For more details on entering text, see page xx. Contrast The menu allows you to adjust the contrast of the LCD screen. You can set the contrast to Lowest, Low, Med, High, or Highest. Each time you scan the setting pressing or , you can see the status of the LCD changing according to each of the settings. Version The menu allows you to view the software and hardware versions of your phone. This feature is helpful if you need to call the customer care. 86 87 SSeettuupp//TTooooll Data/Fax In Menu 7.3 Receiving a Fax or Data File SSeettuupp//TTooooll Your phone is capable of sending and receiving digital data and fax call when connected to a computing device (laptop, desktop, handheld, palmtop, etc.) running Windows 95, Windows 98, or Windows NT. The phone functions just like a typical modem on your PC, enabling you to use wireless data involving a side variety of Windows software applications. To use digital data or fax services with your phone, you will need to obtain digital data/fax kit from your service provider. This kit will contain the necessary cables, software, and documentation required for your to connect and use your phone with your computing device. Note: The phone must be on a digital network to receive or send fax and data. The following options are available:
Off: Voice Call Only: Your phone receives voice calls only. Incoming Fax Only: Your phone receives fax only. Incoming Data Only: Your phone receives data only. When you select an option and press , the display shows your phone mode. Note: Once you have set your phones mode to Incoming Fax Only or Incoming Data Only, you cannot receive regular voice calls until you change back to Off: Voice Call Only. 88 To Receive a fax or data, ensure that your phone is connected to your PC and is powered on and select a desired option. When you receive a fax call, setup the Answer mode in the Fax program on your PC and click on Receive and select one of the following:
Automatic Receive (recommended) Manual Receive Sending a Fax or Data File When connected to a computing device, your phone allows wireless fax and data transmissions. Your computing device software initiates the call to the destination phone number. The phone functions as a wireless modem to send the fax or data file to the number designated by your PC software. Security
. Menu 7.4 Your phone provides many security options, including a user-programmable lock code, call restriction, and phone resetting features. When you are accessing this menu, your phone requires the four digital lock code. The lock code is preset to 0000. 89 SSeettuupp//TTooooll SSeettuupp//TTooooll Lock Phone This menu allows you to lock the phone. Locking the phone limits all outgoing calls except calls to the three hard coded emergency numbers (911, *911 and
#911) and the three user-programmable special number. Unlocked: The phone remains unlocked. On Power-Up: The phone locks automatically the next time your phone is powered on and stays locked until the lock code is entered. Lock Now: The phone locks immediately and stays locked until the lock code is entered. To unlock the phone:
When the phone is locked, you can see MENU:Unlock on the display. Press and when the phone prompts to enter the lock code, enter the four digits lock code. Change Lock The default lock code for your phone is 0000. You can enter a personal lock code, and then change the lock code as often as you like. Note: Your phone does not allow viewing of the lock code unless you know the lock code (this is for obvious security reasons). So, if you change the lock code, be sure to write down the new code and keep it for your reference. 90 Special Number Your phone provides the option of storing special numbers. Each special numbers can be up to ten digits long. All three special numbers can be manually dialed at any time even when your phone is locked. This can be a useful feature for controlling what numbers can be dialed from your phone. Select a location for the special number, then enter the special number. Then press to save the setting. To dial a special number in lock mode, enter the special number by dialing it as you normally would use the digit keys. Then press to call. Erase Phonebook This menu allows you to erase all numbers in the Phone Book memory. When a confirmation displays explaining that you will erase the entire Phone Book entries, press to confirm. Reset Phone Resetting the phone erases all incoming messages, call logs, special numbers, and returns all user-
selectable options to the default settings. When a confirmation displays explaining that you will reset the phone, press to reset the phone. To confirm resetting the phone, press again. The phone reboots (turns itself off then on), then returns to Standby mode. 91 SSeettuupp//TTooooll Call Answer Menu 7.5 MiniBrowser SSeettuupp//TTooooll Menu 7.7 This menu allows you to select an answer when an incoming call comes. It is preset to TALK key. The following options are available:
Open(???): The phone answers when you open the flip cover. TALK key: The phone answers when you press . Any key: The phone answers when you press any key except . Auto Answer Menu 7.6 Your phone has an automatic answer feature for use with the optional Hands-Free Car Kit. If your phone is installed in the Hands-Free Car Kit cradle, and this menu is turned on, then an incoming call will be answered automatically. Car Kit Only Yes: Select to turn this feature on. When an incoming call comes in, the phone receives the call automatically after ringing two times. Car Kit Only No: Select to turn this feature off.When an incoming call comes in, your phone does not answer the call until you receive the call. Each time you start or end the MiniBrowser, you will view a reminder that you will be billed for the connection time. You have the option to change when this message appears. The following options are available:
Prompt to start : The default setting. You will see the prompt when you enter the browser, but not when you exit it. Prompt both: You will be prompted when you enter or exit the browser. Prompt to end: You will see the prompt only when you exit the browser. Prompt none: You will never see the prompt. Language Menu 7.8 Your phone can display all menus and messages in either English or Spanish. Its quick and easy and very convenient for bilingual families or friends. When the desired option displays, press to save the setting. Changing the setting immediately affects all menus and screens. 92 93 SSeettuupp//TTooooll Calculator Menu 7.9 Reference Information Using this feature, you can use the phone as a calculator. You can perform calculations including addition, subtraction, multiplication and division on your phone. Using the Calculator 1. Enter the first number using the numeric keys. 2. Press to set the operator for your calculation until the required arithmetic symbol appears: +
(addition), - (subtraction), x (multiplication), /
(division). 3. Enter the second number. 4. To perform calculation and see the result, press . 5. Repeat steps 1 to 4 as many times as required. Each time you change the operator, the previous calculation is performed and the result is displayed as the top number in the display. Notes:
To erase any mistakes and clear the display, press
. Use to enter a decimal point and to change the sign of a number to a negative (-). Accessories Batteries Two types of Li-ion batteries are available for use with your phone:
STANDARD Battery EXTENDED Battery Desktop Charger Desktop charger allows you to recharge your battery with the phone and also an extra battery, if any, simultaneously. Cigarette Lighter Adapter The Cigarette Lighter Adapter charges your phone in a vehicle while you drive and enables you to operate the phone from a vehicle cigarette lighter socket. Hands-Free Car Kit The Hands-Free Car Kit provides safety, freedom and convenience in your vehicle. (Kit includes Cradle and Microphone.) Ear-Microphone The Ear-Microphone includes both the earpiece and microphone in a convenient, lightweight unit. RS-232C Cable The RS-232C Cable connects your SPH-A250 to your computer port, allowing you to use Internet or other communication programs. 94 95 RReeffeerreennccee IInnffoorrmmaattiioonn Using the Batteries Your phone is powered by a rechargeable Li-ion standard battery. Additional batteries are also available (ask your SAMSUNG dealer for further details):
Precautions When Using Batteries Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby times are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging times depend on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. RReeffeerreennccee IInnffoorrmmaattiioonn Use only Samsung-approved batteries and recharge your battery only with Samsung-
approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first. Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and life-time of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 C
(32 F). Do not short-circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuit. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. 96 97 RReeffeerreennccee IInnffoorrmmaattiioonn Safety Information Road Safety Remember, road safety always comes first!
Do not use a hand-held phone while driving a vehicle. Always park the vehicle before having a conversation. Make sure that the phone is stored safely and will not fall or be broken in the event of a collision or emergency stop. The use of an alert device to operate a vehicles lights or horn on public roads is not permitted. Only qualified personnel should install or service the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the unit. Electronic fuel injection, anti-skid braking, electronic cruise control or any other electronic systems may malfunction due to the lack of protection from radio signals. Check regularly that all cellular phone equipment in your vehicle is mounted and operating correctly. Operating Environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). RReeffeerreennccee IInnffoorrmmaattiioonn Operation of any radio transmitting equipment, including cellular phones, may interfere with inadequately protected medical devices. Consult a physician or the manufacturer of the medical device if you have any questions. Other electronic equipment may also be subject to interference. As with other mobile radio transmitting equipment, you are advised that for satisfactory operations and personal safety, the equipment should only be used in the normal operating position. Always switch off the phone when at a refuelling point (service station). You are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. Switch off your cellular phone when in an aircraft. The use of cellular phones in an aircraft is illegal and may be dangerous to the operation of the aircraft or disrupt the cellular network. Failure to observe these instructions may lead to the suspension or denial of cellular telephone services to the offender, legal action or both. 98 99 RReeffeerreennccee IInnffoorrmmaattiioonn Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill the warranty obligations and enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of children. Keep the phone dry. Precipitation, humidity and liquids containing minerals will corrode the electronic circuits. Do not use or store the phone in dusty, dirty areas as its components may be damaged. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. Do not store the phone in cold areas. When the phone warms up (to its normal temperature), moisture can form inside the phone, which may damage the electronic circuits. Do not attempt to open the phone. Non-expert handling of the phone may damage it. Do not drop or knock the phone. Rough handling may damage the internal circuits. RReeffeerreennccee IInnffoorrmmaattiioonn Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in mild, soapy water. If the phone or any of its accessories are not working properly, take them to your nearest qualified service centre. The personnel there will assist you, and if necessary, arrange for the phone to be repaired. Emergency Calls Important! This phone, like any cellular phone, uses radio signals, cellular and landline networks, as well as user-programmed functions that cannot guarantee connection in all conditions. Therefore, you should never rely solely on any cellular phone for essential communications (medical emergencies for example). Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with local cellular service providers. 100 101 Glossary Airtime - Actual time spent talking on the wireless phone. Most carriers bill customers based on how many minutes of airtime they use each month. Antenna - A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas. Base Station - The fixed radio transmitter/receiver that maintains communications with mobile radio telephones within a given area. (Typically seen as cell or cell site) CDMA - (Code Division Multiple Access) A spread-
spectrum approach to digital transmission. With CDMA, each conversion is digitized and then tagged with a code. The mobile phone deciphers only a particular code to pick the right conversation off the air. The transmitted signal is just above noise level across the available bandwidth. Channel - Communications signals transmit along paths called channels. Codec - Compression & Decompression. Call Waiting - Ability to inform users that they have an incoming call when engaged on another call. GGlloossssaarryy Line Identification - Services allowing subscribers Services (Caller ID to view or block the telephone Display) numbers of callers. Frequency - A measure based on time, as one or more waves per second, in an electrical or light wave information signal. A signals frequency is stated in cycles-
per-second or Hertz (Hz). Hands-Free - A feature that permits a driver to use a wireless phone without lifting or holding the handset - an important safety feature for automobiles, tractors and most other motorized vehicles. LCD - (Liquid Crystal Display) Commonly used to refer to the screen display on the wireless phone. LED - (Light Emitting Diode) Commonly used to refer to a small light on the wireless phone or on the Desktop Charger. The LED lights on the phone to indicate an incoming call. The lights on the charger to indicate that battery charging is taking place. Prepend - The addition of a prefix, such as an area code, to a phone number. RF - Radio Frequency Roaming - The ability to use a wireless phone to make and receive calls in places outside of the home service area. 102 103 GGlloossssaarryy Service Charge - The amount paid each month to receive wireless service. Soft Keys -
and are used as soft keys in the phone in the MiniBrowser. The purpose of the keys is indicated on the bottom of the display just above the corresponding key. Standby Time - The amount of time a fully charged wireless portable or transportable phone can be on and idle without being in use. (See Talk Time) Talk Time - The length of time a person can talk on a portable or transportable wireless phone without recharging the battery. Vocoder - Voice Coder. A device used to convert speech into digital signals. Voicemail - A computerized answering service that answers a call, plays a greeting and records a message. Depending on the sophistication of the service, it can notify the subscriber, via a pager, of an incoming call or message. (Also called voice messaging) Wireless - Radio-based Systems that allow transmission of telephone or data signals through the air without a physical connection, such as a metal wire
(copper) or fiber optic cable. Index b e P a g e n u m b e r s w i l l l a t e r t e d
. i n s e r A Accessories Accessing, menu Adding, number Adjusting, volume Airtime Alarm Clock Alerts Analog mode Answer a call automatic Automatic answer B Backlight descriptions menu Battery charging installing low indicator removing precautions Block own number Bookmarks Browser - see MiniBrowser C Calculator Calendar Alarm Clock Count Down Jump To Date Month View Today To Do List World Clock Call answer, setting Calls answering dropped failed forwarding emergency ending incoming making missed outgoing three-way waiting Call forwarding Call logs incoming erasing missed outgoing Call time Call waiting Caller ID Clock alarm world Correcting, numbers Contrast Countdown Customer care D Data call , setting receiving ringer Dialing emergency four-digit last number pause prepending speed Dial options 104 105 b e P a g e n u m b e r s w i l l l a t e r t e d
. i n s e r IInnddeexx D (continued...) Display icons menu Dropped calls DTMF tones E Earpiece volume Emergency dialing Entering text alphabetical numbers T9 symbols Entry, finding Erasing airtime alarm setting event call logs messages phonebook to do list F Failed calls Fax call, setting receiving ringer Finding entry name Four-digit dialing G Greeting 106 I Icons, on display Incoming calls messages Internet - see MiniBrowser J Jump To Date K Key beep Key guard Keys descriptions location L Language Last number, redialing Light backlight service light Links Lock changing code code the phone unlock the phone Low battery indicator M Menu accessing by scrolling accessing by shortcut map Memory dialing one-touch speed three-touch two-touch M (continued...) Message Browser erasing options ringer page/text voicemail MiniBrowser bookmarks entering text exiting launching links making a call messages navigating prompts soft keys Month View Minute beep Missed calls Mode power save roaming standby talk text input My phone number Muting microphone ringer N Name Number entering finding/dialing adding blocking correcting my phone finding/dialing storing IInnddeexx O One-touch dialing Outgoing calls P Page Pause dialing dialing storing manual dialing Phone Book adding entry erasing finding name finding entry Phone layout Power save mode Prepend dialing R Recharging batteries Redialing Resetting the phone Ringer muting name roam type volume Roaming guarding a call mode S Safety information precautions precautions for batteries Service light Service alert numbers 107 IInnddeexx S (continued...) Security Special numbers dialing storing Setup/Tool Sounds Speed dialing Standby mode Storing phone book entries special numbers Switching on or off microphone phone T T9 (English) mode Talk mode Text, entering Text input mode alpha number symbol T9 english Text message Three-touch dialing Three-Way calling Today To Do List Tone length Two-touch dialing U Unlock the phone Unpacking V Version Vibration mode Voice mail Volume, adjusting W World Clock P a g e n u m b e r s w i l l l a t e r t e d
. i n s e r c a l l s a n d d a i l b e o r d o w n
T A L K S c a n t h e l a s t T A L K
N a v i g a t i o n
u p n u m b e r R e d a i l l a s t T A L K t w i c e l v o u m e j A d u s t r i n g l v o u m e j A d u s t s p e a k e r
r e p e a t e d l y
i n S t a n d b y m o d e
r e p e a t e d l y
i n T a l k m o d e
) S p e e d d i a l R e c e i v e a c a l l T A L K o r O p e n t h e p h o n e M a k e a c a l l P h o n e n u m b e r
T A L K i n t o m e m o r y S t o r e n u m b e r s n a m e l o c a t i o n S c a n m e m o r i e s E r a s i n g a s p e c i f i c e n t r y
M E N U
5
O K N a v i g a t i o n
u p o r d o w n
) N a v i g a t i o n
u p o r d o w n
) N a v i g a t i o n
d o w n
N a v i g a t i o n
u p o r d o w n
) N a v i g a t i o n
u p
N a m e
O K t h e n h o l d d o w n t h e t h i r d t h e f i r s t a n d t h e s e c o n d
. i d g i t
, T h r e e
T o u c h
1 0 0
2 2 9
P r e s s d o w n t h e t h i r d d i g i t
. t h e s e c o n d d i g i t
, t h e n h o d T w o
T o u c h
0 1 0
0 9 9
P r e s s l d o w n t h e t h i r d d i g i t
. O n e T o u c h
0 0 1
0 0 9
H o d l P h o n e n u m b e r
O K
o r a n o t h e r l o c a t i o n
E n t e r a n a m e
O K
O K O K
S e l e c t a l a b e l
O K
O K
O K
O K I B A S C O P E R A T I O N I N T E R N A L P H O N E B O O K S P H
A 2 5 0 Q u c k i R e f e r e n c e C a r d 108 109 n w o d t n u o C l l k c o C m r a A k c o C d l r o W l
5 6 7 e v i t c A t e S l l A e s a r E d r o c e R w e i v e R
1 2 3 4 n I x a F
a t a D y t i r u c e S r e w s n A l l a C r e w s n A o t u A r e s w o r B n M i i s d n u o S l y a p s i D e g a u g n a L
l r o t a u c l a C
1 2 3 4 5 6 7 8 9 r e s w o r B n M i i l i a D e c i o V
6
7 r a d n e a C l
5 p u t e S
8 E E R T U N E M
) U N E M s s e r p
, s s e c c a o T
u n e M n i a M y r o t s i H e s a r E
4 e m i T r i A
5 g n i o g t u O
1 g n i m o c n I
2 d e s s i M
3 y r t n E w e N d d A
e n o h P y M
2
3 e m a N d n i F
1 y r t n E d n i F
4 s e c i v r e S
5 g s M r e s w o r B
3 e s a r E
4 l i a m e c i o V
1 t x e T
e g a P
2 k o o B e n o h P
2 s e g a s s e M
3 s l l a C
1 110 d r a u G e d o M t e S l l a C
1
2 g n i m a o R
4 e t a D o T p m u J
3 w e i V h t n o M
2 t s i L o D o T
4 y a d o T
1 r a d n e l a C
5 Licensed by QUALCOMM Incorporated under one or more of the following Patents. U.S Patent No. 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 111
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-06-20 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2001-06-20
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
SPHA250
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** C****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R**** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia
|
|||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R****** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia
|
|||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single-Mode PCS Phone (PCS CDMA ) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is EIRP. SAR compliance for body-worn operating configuration is based on a separation distance of 1.8 cm between the back of the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values under this FCC ID are: Head: 1.37 W/kg; Body-worn: 1.07 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R****** O********
|
||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | 1851.25000000 | 1908.75000000 | 0.3650000 | 2.5000000000 ppm | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC