2. The Samsung Smart Control Turns the TV on or off. 123: Press this button to display the On-Screen Remote. Displays the numeric buttons, the Source button, the Menu button, and other function buttons on the top of the screen so that you can run functions conve-
niently. EXTRA: Displays related information about the current program. Moves the focus and changes the values seen on the TV's menu. Enter: Press this button to select or run a focused item.
: Returns to the previous menu or channel. Press and hold to exit the currently running function on the TV's screen.
: Controls the content when you are playing movies or music or viewing pictures.
: Press this button to bring up Smart Hub applications. (See the e-Man-
ual chapter, "Smart Features > Smart Hub.") VOL: Changes the volume. Press this button to mute the sound temporarily. CH: Changes the channel. Press this button to launch the Guide while you are watching the TV. N When you are in a dark place, the Samsung Smart Control lights up its buttons so that you can identify their printed names. Pairing the TV to the Samsung Smart Control When you turn on the TV for the first time, the Samsung Smart Control pairs to the TV automatically. If the Samsung Smart Control does not pair to the TV automatically, point it at the remote control sensor of the TV, and then press and hold the buttons labeled and in the diagram on the left simultaneously for 3 seconds or more. KU6300_ZA_BN68-07842A-X1_ENG.indb 5 2016-01-06 3:00:01 English - 5 Installing batteries into the Samsung Smart Control To install the batteries, push the rear cover open in the direction of the arrow and insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct direction. N Alkaline batteries are recommended for longer battery life. KU6300_ZA_BN68-07842A-X1_ENG.indb 6 2016-01-06 3:00:02 English - 6
<FCC Part 15 statement>
: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. The antenna used for this device must not be co-located or operating in conjunction with any other antenna or transmitter.
<RSS compliance statement>
This product complies with RSS-247 of Industry Canada. Operation is subject to the following two conditions:
(1) this product may not cause harmful interference, and
(2) this product must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. IC Radiation Exposure Statement This device is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528.