FCC ID: A3LRMCSPR1AP1 Smart Control

02 The Samsung Smart Remote About the Buttons on the Samsung Smart Remote The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.

(Power) Press to turn the TV on or off.

(Color / Number button) Each time you press this button, the colored buttons window and the virtual numeric pad are displayed alternately. Use these colored buttons to access additional options specific to the feature you are using. When pressed, a number strip appears on the bottom of the screen. Select numbers and then select Done to enter a numeric value. Use to change the channel, enter a PIN, enter a ZIP code, etc. Select Selects or runs a focused item. When pressed while you are watching content, detailed program information appears.

(Return) Returns to the previous menu. When pressed for 1 second or more, the running function is terminated. When pressed while you are watching a program, the previous channel appears.

(Play/pause) When pressed, the playback controls appear. Using these controls, you can control the media content that is playing.

(Smart Hub) Returns to the Home Screen.

(Bixby) Runs Bixby. Press and hold the button, say a command, and then release the button to run Bixby. When you press the button, the Explore Now menu appears at the bottom of the screen.

[ Keep the remote more than 0.6 inches from your face when using and speaking to Bixby through the mic on the remote. For more information about the Bixby, refer to Smart Features >

Using Bixby in the e-Manual.

(Ambient Mode) In TV mode, press this button to enter Ambient Mode. If you press the button when the TV is completely turned off, the TV turns on in Ambient Mode. For more information about the Ambient Mode, refer to Smart Features > Using the Ambient Mode in the e-Manual. Directional pad (up/down/left/right) Moves the focus and changes the values seen on the TV's menu. VOL (Volume) Move the button up or down to adjust the volume. To mute the sound, press the button. When pressed for 1 second or more, the Accessibility Shortcuts menu appears. CH (Channel) Move the button up or down to change the channel. To see the Guide screen, press the button. Press each button to run its function. English - 11 Pairing the TV to the Samsung Smart Remote When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV automatically. If the Samsung Smart Remote does not pair to the TV automatically, point it at the remote control sensor of the TV, and then press and hold the buttons labeled and as shown in the figure on the left simultaneously for 3 seconds or more. Installing batteries into the Samsung Smart Remote To install the batteries, push the rear cover open in the direction of the arrow at the bottom of the illustration, and then insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct direction. Close the rear cover as shown. Alkaline batteries are recommended for longer battery life.

- Battery: DC 3.0 V

- Temperature range: 0 C ~ 50 C English - 12

Page 1 of 4 Page 2 of 4 Page 3 of 4 Page 4 of 4 Chip Antenna

< DUT Photograph >

Page 1 of 7

< Front >

ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC-003 (Rev.2)

< Back >

Page 2 of 7

< Left >

< Right >

ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC-003 (Rev.2) Page 3 of 7

< Top >

< Bottom >

ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC-003 (Rev.2)

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment Label Location

Company Address Letter of Authorization

: Samsung Electronics Co Ltd

: 19 Chapin Rd., Building D, Pine Brook, New Jersey, 07058, United States

: RMCSPR1AP1

: A3LRMCSPR1AP1

: SMART CONTROL Product Name Model Number FCC Identifier We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Jenni Chun Title: General Manager Date: October 25, 2018 Signature of applicant:

Samsung Electronics Co Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: October 25, 2018 Subject; Request for Confidentiality FCC ID: A3LRMCSPR1AP1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Jenni Chun Title: General Manager