ACA-3216-A1-CC-S Specification 1. Features and Application This product is for WiFi/BT band 2. Explanation of Part Number AC A
(1) (2)
- 3216 - A1
(4)
(3)
- CC - S
(6)
(5) _
(7)
(1) Product TypeChip Antenna
(2) Center Frequency/Band Code2.4 GHz Band
(3) Size Code3.2*1.6 mm (Length * Width)
(4) Design Revision CodeRev.1
(5) Antenna TypeCoupling Ceramics
(6) Special CodeRoHS Compliant
(7) Suffix For Special Requirements 3. Electrical Specification Item Frequency Band Polarization Impedance VSWR
*Peak Gain
*Peak Efficiency Specification 2400 ~ 2500 MHz Linear 50 ohm Typ. Less than 2.5 0.97 dBi Typ. 71.1 % Typ.
* Test condition Test board size 100*50 mm Matching circuit may be required UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 1 OF 8
4. Physical Dimension Top view L Bottom view Side view W W1 H A B L1 L W H A B L1 W1 3.20 0.30 1.70 0.20 0.50 0.10 0.30 0.15 0.30 0.15 0.47 0.20 0.70 0.20
(Unit mm) 5. Recommended PCB Layout Layout Pad Pad 2.4 GHz
(GND)
(Feed) Pad
(GND) Clearnace Area
(8.5*6.5 mm) Ground Feed Line
(50 ohm) UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 2 OF 8
Pad Dimensions on PCB Layout Top View Perspective View
(Unitmm)
* Tolerance0.05 mm UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 3 OF 8
6. Electrical Characteristics Return Loss Frequency
(MHz) VSWR 2400 2450 2500 1.84 1.15 1.99 Radiation Pattern The Gain pattern is measured in INPAQs FAR-field chamber. DUT is placed on the table of rotator, a standard horn antenna and Vector Network Analyzer is used to collect data. 3D Chamber Definition UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 4 OF 8
3D Gain Pattern 2450 MHz UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 5 OF 8
7. Taping Package and Label Marking
(1) Quantity4000pcs/Reel, T(Thickness of chip)1.2
(2) Plastic Tape Type 3216 W 80.1 A 1.9~2.1 B K 3.50~3.60 Max. 1.40 t 0.220.05 F 3.500.1 P 4.000.1
(Unit: mm)
(3) Tape Packing
(4) Cover Tape Reel Off Force
(5) Reel Dimensions 1780.5 130.5 1780.5 130.5
(Unit: mm) A B W 80.5 120.5 UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 6 OF 8
8. Environmental Characteristics
(1) Reliability Test Item Condition Specification Thermal shock 1. 303 minutes at -40C5C, 2. Convert to +105C (5 minutes) 3. 303 minutes at +105C5C, 4. Convert to -40C (5 minutes) 5. Total 100 continuous cycles Humidity resistance 1. Humidity: 85% R.H. 2. Temperature: 855C 3. Time: 1000 hours. High temperature resistance 1. Temperature: 150C5C 2. Time: 1000 hours. Low temperature resistance 1. Temperature: -40C5C 2. Time: 1000 hours. No apparent damage Fulfill the electrical spec. after test. No apparent damage Fulfill the electrical spec. after test. No apparent damage Fulfill the electrical spec. after test. No apparent damage Fulfill the electrical spec. after test. Soldering heat resistance 1. Solder bath temperature: 2605C 2. Bathing time: 101 seconds No apparent damage Solderability The dipped surface of the terminal shall be at least 95% covered with solder after dipped in solder bath of 2455C for 31 seconds. No apparent damage
(2) Storage condition
(a) At warehouse The temperature should be within 0 ~ 30C and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.
(b) On board The temperature should be within -40 ~ 85C and humidity should be less than 85% RH.
(3) Operating temperature range Operating temperature range: -40 ~ +105C. UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 7 OF 8
9. Recommended reflow soldering
(1) Soldering gun procedure Note the follows, in case of using solder gun for replacement.
(a) The tip temperature must be less than 350C for the period within 3 seconds by using soldering gun under 30 W.
(b) The soldering gun tip shall not touch this product directly.
(2) Soldering volume Note that excess of soldering volume will easily get crack the body of this product. UNLESS OTHER SPECIFIED TOLERANCES ON ANGLES !!!! HOLEDIA !!!!
UNIT####mm SCALE#### -----
DRAWN BY:!"#!"#!"#!"#
CHECKED BY:$%&$%&$%&$%&
DESIGNED BY:!"#!"#!"#!"#
APPROVED BY:()()()() TITLE####ACA-3216-A1-CC-S Specification INPAQ TECHNOLOGY CO., LTD.
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. ENS000069320 SPEC REV. A1 PAGE 8 OF 8