all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 4.47 MiB | May 09 2022 / November 11 2022 | delayed release | ||
1 2 |
|
Internal Photos | Internal Photos | 2.47 MiB | May 09 2022 / November 11 2022 | delayed release | ||
1 2 |
|
External Photos | External Photos | 550.14 KiB | May 09 2022 / November 11 2022 | delayed release | ||
1 2 |
|
Label and Label Location | ID Label/Location Info | 3.54 MiB | May 09 2022 / May 15 2022 | |||
1 2 |
|
Authorization Letter | Cover Letter(s) | 100.85 KiB | May 09 2022 / May 15 2022 | |||
1 2 | Block Diagram | Block Diagram | May 09 2022 | confidential | ||||
1 2 | Circuit diagram | Schematics | May 09 2022 | confidential | ||||
1 2 |
|
Confidentiality Request Letter -1 | Cover Letter(s) | 75.76 KiB | May 09 2022 / May 15 2022 | |||
1 2 |
|
Confidentiality Request Letter -2 | Cover Letter(s) | 21.90 KiB | May 09 2022 / May 15 2022 | |||
1 2 |
|
Declaration Letter | Cover Letter(s) | 70.50 KiB | May 09 2022 / May 15 2022 | |||
1 2 | Operational Description | Operational Description | May 09 2022 | confidential | ||||
1 2 | Operational Description - Antenna spec | Operational Description | May 09 2022 | confidential | ||||
1 2 |
|
RF Exposure Info | RF Exposure Info | 200.62 KiB | May 09 2022 / May 15 2022 | |||
1 2 |
|
Setup Photos | Test Setup Photos | 386.90 KiB | May 09 2022 / November 11 2022 | delayed release | ||
1 2 |
|
Test Report | Test Report | 4.13 MiB | May 09 2022 / May 15 2022 |
1 2 | Users Manual | Users Manual | 4.47 MiB | May 09 2022 / November 11 2022 | delayed release |
FULL MANUAL MX-ST90B Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register SAFETY INFORMATION SAFETY WARNINGS WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Refer to the table below for an explanation of CAUTION symbols which may be on your Samsung product. Do not expose this apparatus to dripping or CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A):
FCC Suppliers Declaration of Conformity Responsible Party - U.S. Contact Information:
Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864) FCC Compliance Statement :
AC voltage : Rated voltage marked with this symbol is AC voltage. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use :
This symbol instructs the user to consult the user manual for further safety related information. conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENG - ii FCC Caution :
FCC Radiation Exposure Statement :
Any changes or modifications not expressly This equipment complies with FCC radiation approved by the party responsible for exposure limits set forth for an uncontrolled compliance could void the users authority to environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) This product satisfies FCC regulations when between the radiator and your body. This device shielded cables and connectors are used to and its antenna(s) must not be co-located or connect the unit to other equipment. operated in conjunction with any other antenna or To prevent electromagnetic interference with transmitter. electric appliances, such as radios and televisions, use shielded cables and CALIFORNIA USA ONLY (Applicable for connectors for connections. networking models only.) Class B FCC Statement This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the This equipment has been tested and found to product sold or distributed ONLY in California comply with the limits for a Class B digital device, USA Perchloate Material - special handling may pursuant to Part 15 of the FCC Rules. These limits apply, See www.dtsc.ca.gov/hazardouswaste/
are designed to provide reasonable protection perchlorate. against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/
recycling Or call, 1800SAMSUNG WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. cause harmful interference to radio or television Important Safety Instructions reception, which can be determined by turning Read these operating instructions carefully the equipment off and on, the user is encouraged before using the unit. Follow all the safety to try to correct the interference by one of the instructions listed below. Keep these operating following measures:
Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. Connecting the equipment to an outlet that is 5. Do not use this apparatus near water. on a different circuit than the radio or TV. 6. Clean only with dry cloth. Consulting the dealer or an experienced 7. Do not block any ventilation openings. radio/TV technician for help. Install in accordance with the manufacturers instructions. ENG - iii 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other To avoid deterioration of water resistant Check the following and use the unit correctly. apparatus (including amplifiers) that produce Deformation or damage from dropping the heat. unit or subjecting it to mechanical shock may 9. Do not defeat the safety purpose of the cause deterioration of the water resistant. polarized or grounding-type plug. This unit does not have a design that is A polarized plug has two blades with one resistant to water pressure. Use of the unit in wider than the other. A grounding type plug a location where high water pressure is has two blades and a third grounding prong. applied, such as in the shower, may cause a The wide blade or the third prong are malfunction. provided for your safety. If the provided plug Do not pour high-temperature water or blow does not fit into your outlet, consult an hot air from a hair dryer or any other electrician for replacement of the obsolete applicance on the unit directly. Also never use outlet. the unit in a place subject to high 10. Protect the power cord from being walked temperatures, such as in a sauna or near a on or pinched particularly at plugs, heat source. convenience receptacles, and the point Handle the cap with care. Port cover and AC where they exit from the apparatus. plug cover plays a very important role in 11. Only use attachments/accessories specified maintenance of the water resistant. When by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. using the unit, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the water resistant may deteriorate and may cause a When a cart is used, use caution when malfunction of the unit as a result of water moving the cart/apparatus combination to entering the unit. avoid injury from tip-over. The product cannot be dumped to ensure it is 13. Unplug this apparatus during lightning water resistant. storms or when unused for long periods of IPX5 cannot be met when any JACK is time. plugged in. 14. Refer all servicing to qualified service In a state of electricity, IPX5 can be met when personnel. Servicing is required when the the power cord passes through the cover apparatus has been damaged in any way, power slot and the cover power is completely such as power-supply cord or plug is closed, otherwise, it does not. damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A) ENG - iv POWER PRECAUTIONS ABOUT THIS MANUAL 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the rear of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. 3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.
(https://www.samsung.com/us/support/
downloads/) Design and specifications are subject to change without prior notice. ENG - v CONTENTS 01 Checking the Components 2 Inserting Batteries before using the Remote Control
(AAA batteries X 2) 02 Product Overview Top Panel of the Sound Tower Rear Panel of the Sound Tower 03 Connecting the Sound Tower Connecting Electrical Power Connecting the Group Play Mode 04 Connecting an External Device Connecting an External Device via Analog Audio Cable Connecting a mobile device via Bluetooth Connecting a Samsung TV via Bluetooth 05 Connecting a USB Storage Device Software Update Connecting an Optional Microphone 06 Using the Remote Control How to Use the Remote Control How to use Sound Mode How to use the DJ Effect ENG - vi
------------------------- 4 5
------------------------- 5
------------------------- 6 8
------------------------- 8
------------------------- 9 16
------------------------- 16
------------------------- 17
------------------------- 20 22
------------------------- 23
------------------------- 24 25
------------------------- 25
------------------------- 28
------------------------- 29 07 Using the Samsung Sound Tower App 30 Install Samsung Sound Tower App Using the Samsung Sound Tower App What you can do with Samsung Sound Tower App:
------------------------- 30
------------------------- 30
------------------------- 31 08 Trouble shooting 09 License 10 Open Source License Notice 11 12 Important Notes About Service Specifications and Guide 32 35 36 36 37 Specifications
------------------------- 37 ENG - vii 01 CHECKING THE COMPONENTS Sound Tower Main Unit Remote Control (AH81-15581A) /
Batteries (AAA batteries x 2) Power Cord
(AH81-15587A) For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Sound Tower Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. Carry the system When moving the product, in order to avoid personal injury and/ or property damage, and achieve water resistant, please see the illustrations below. 1. When moving the product, do not drag or pull the product from the ground without the wheels sticking out. 2. Do not lift the set to prevent the set from injuring your feet. ENG - 2 3. To move the set, perform the following steps. Press the self-locking switch of the wheels respectively to rotate the two wheels out of the bottom of the set. When DA is heard, it means that the wheels are adjusted in place. Press the self-locking switch Rotate the wheels 180 degrees POWER Two hands grasp the handle of the set and move the set through the wheels as shown below The wheels were adjusted to the front Warning:
when the set passes the blind road or does not lie flat on the road, please move slowly to prevent the set from rolling over!
ENG - 3 After the set is moved, press the self-locking switch of the two wheels respectively to rotate the wheels to the bottom of the set. When DA is heard, it means that the wheels are adjusted in place. Press the self-locking switch Rotate the wheels 180 degrees POWER 4. The product cannot be dumped to ensure it is water resistant. The wheel was rotated back to the bottom of the set Inserting Batteries before using the Remote Control
(AAA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.
(the remote control does not support IPX5) ENG - 4 02 PRODUCT OVERVIEW Top Panel of the Sound Tower
BASS
Remote Sensor When operating the Sound Tower system, please aim the front of the remote control at the remote sensor. LED indicator Displays operating messages or current status of the Sound Tower system. The information sources represented by each LED are as follows:
(BT)
(USB1)
(USB2)
(AUX1)
(AUX2) Power Turns the Sound Tower on and off. Light Press the
(Light) button to turn the Lighting Mode on.
Source Press to select a source connected to the Sound Tower. Press and hold the SEARCHING TV mode.
(Source) button for more than 5 seconds to enter the
Play/Pause Play/Pause Press the button to pause a music file temporarily. When you press the button again, the music file plays. Demo play button for more than 5 seconds to start the Demo play while Press and hold the the system is turned on. 5 LEDS flashing simultaneously and it plays demo music for 90 seconds. Please be careful as it may play louder than the set volume.
Volume down
Volume up Press the
(Volume down) button to lower the volume. Press the
(Volume up) button to raise the volume.
BASS Press the BASS button to use the powerful bass sound. ENG - 5 Rear Panel of the Sound Tower
AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A) AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A)
POWER
Bluetooth PAIRING
ADD STEREO
GROUP PLAY
AUX1 ECH01 VOL1 MIC1 Press the plane will be fast blink. PAIRING button to enter pairing mode, "PAIRING" LED on the rear Press the ADD STEREO button to connect to another same model Sound Tower wirelessly. Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly. Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio Out on an external device. You can give an echo effect to the sound from a connected microphone (MIC1) by adjusting the ECH01 knob. Use the VOL1 knob on the main unit to adjust the volume of a connected microphone (MIC1). Connect your microphone to the MIC1 jack.
GROUP PLAY IN Terminals Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to Audio Out on an external analog output device.
GROUP PLAY OUT Terminals Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main unit to GROUP PLAY(IN) on another Sound Tower.
MIC2 VOL2 ECHO2 Connect your microphone to the MIC2 jack. Use the VOL2 knob to adjust the volume of a connected microphone (MIC2). You can give an echo effect to the sound from a connected microphone (MIC2) by adjusting the ECHO2 knob. ENG - 6
USB1 USB2 Power Connect a USB device to the USB1 or USB2 ports on the main unit. If you connect your cell phone to the USB1 port, you can charge it. Press the
(Source) button to select USB1 or USB2. Connect the power cord to the Power jack and connect the other end of the power cord to a wall socket to supply electrical power to the Sound Tower. ENG - 7 03 CONNECTING THE SOUND TOWER Connecting Electrical Power Use the power cord to connect the Sound Tower to an electrical outlet in the following order:
Connect the power cord to the Sound Tower and then to a wall socket. See the illustrations below. For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Sound Tower) How to use the water resistant function? Water resistant can be met when any Jack or AC power cord is plug-in, but make sure that the caps are closed completely. Product cannot be dumped to ensure it is water resistant. POWER Rear of Sound Tower Connecting Electrical Power ENG - 8 Connecting the Group Play Mode You can connect multiple audio systems in a wired group play mode to create a more interesting party environment and to produce higher sound output. Connecting the wired Group Play mode RCA cable
(not supplied)
AUX2 white LED on AUX2 white LED on Continue the connection until the last Sound Tower 1st Sound Tower HOST 2nd Sound Tower Last Sound Tower
Connect the analog audio cable to the OUT(Group Play) of the HOST. Sound Tower HOST can play music from any source.
Connect the analog audio cable to the IN(AUX2) of 2nd Sound Tower and Set the source to AUX2.
Set up Group Play by connecting all the systems using analog audio cables. Use the AUX or
(Source) button to change the source to AUX2 for every Sound Tower except the Sound Tower HOST. Set one Sound Tower as the HOST and any music played on it will be shared among any other Sound Tower in the Audio group. NOTES Analog audio cables are not supplied. Depending on the length or characteristics of the cable, there may be a difference in operating distance. You do not need to connect the last system to the first system. In this case, only the first system can become a group play mode Host. Connect the system that is not equipped with the wired group play function as the last system. Be sure to select the Audio In function on the last system. In this configuration, the sound from the last system may lag behind others. To deactivate the wired group play mode Remove analog audio cable from the HOST Change to a source other than AUX2 Turn off the HOST Wired Group Play function cannot be activated. ENG - 9 Check the connections. Check the audio cables are connected correctly. Check the Sound Tower HOST operation status. Wired Group Play function does not work properly. Turn off the system. Then, turn it back on again to activate the function. When the microphone operating on the HOST, the MIC sound is output to all the SUB Sound Tower. Connecting the wireless Group Play mode You can connect multiple audio systems in a wireless group play mode to create a more interesting party environment and to produce higher sound output. Precondition When connecting a Sound Tower, make sure it is within 3.28 ft (1 m) distance. Cannot set the mode to Group Play mode when sound tower is connected to TV. If the sound tower is in Stereo mode, need to exit it before using Group Play mode.
LED Blinks Slow(15s) Waiting to enter pairing mode POWER LED Blinks Fast(30s) SUB Connection available POWER HOST Sound Tower SUB 1 Sound Tower Continue the connection until the last Sound Tower POWER Last(S UB) Sound Tower
Press the GROUP PLAY button on the HOST Sound Tower, wait until the GROUP PLAY LED from slow blinks(15s) turns to fast blinks(30s), and the Sound Tower has became Sound Tower HOST.
(SUB connect to HOST within 30sec which LED fast blinks.) Only BT source can be used, select other source will cause Group Play mode disconnecting. Press and hold GROUP PLAY button for 5sec in BT Source, the Sound Tower turns to fast blinks immediately.
Press the GROUP PLAY button on the SUB Sound Tower, searching the HOST while GROUP PLAY LED blinks, and the LED will turns to solid and output beep sound after connected to the Sound Tower HOST.
If less than 20 minutes have passed since Group Play button was pressed, refer to Step 2 to connect additional SUB. If 20 minutes have passed since Group Play button was pressed, refer to Step 1&2 to connect additional SUB. Play music on the HOST Sound Tower. Sound outputs from all the connected systems. ENG - 10 NOTES All the Sound Tower models can connect Group Play mode. When HOST Sound Tower connect to the Samsung TV, the Group play mode will automatically disconnected. Environmental conditions or other factors with connected devices may have effect on playback quality. When lighting LED blinks pink and output beep sound, an error in the Group Play mode connection. Try Step 1 to 2 again. The ADD STEREO button and PAIRING button on the SUB Sound Tower systems are not available while in wireless Group Play mode. The ADD STEREO button on the HOST Sound Tower is not available while in wireless Group Play mode. Bluetooth devices can search and connect with the HOST Sound Tower only, but the SUB cannot connect to any Bluetooth device. If you power off or select any source other than BT on a SUB unit, the Group Play mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. In this configuration, the sound from the last system may lag behind others. Wireless Group Play function does not work properly. Turn off the system. Then, turn it back on again to activate the function. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc. When using the wireless Group Play mode function, sound from the microphone is only output from the system to which the microphone is connected. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (HOST or SUB). Output beep sound and the LED above the GROUP PLAY button is off. 2. If you select any source other than BT on the SUB units or turn off the HOST Sound Tower, the Group Play mode is disconnected. LED Indications LED STATE Description Green Red Blink Solid Solid Waiting for a wireless Group Play connection. The wireless Group Play connection was successful. There is an error with the wireless Group Play connection. ENG - 11 Connecting the Stereo Mode Connect two Sound Tower and use them with mobile device to enjoy stereo mode, to make a larger listening area or to hear greater left and right audio separation. Precondition To use the Stereo mode, both Sound Tower systems must be the same model. When connecting a Sound Tower, make sure it is within 3.28 ft (1 m) distance. If the sound tower is in Group Play mode, need to exit it before using Stereo mode. Cannot set the mode to Stereo mode when sound tower is connected to TV. Description LED Indicator Light Bar Cyan blink Connecting Connected Failed Cyan blink once Pink blink once POWER POWER Left Speaker MAIN Sound Tower Right Speaker SUB Sound Tower The initial connection MAIN(Left) and SUB(Right) can not select when initial connection. If press the ADD STEREO button on the MAIN or SUB Sound Tower, it switch the Left and Right Speaker. 1. Press the ADD STEREO buttons of the two Sound Towers. The LED blinks on the ADD STEREO button. 2. When the connection is complete, output beep sound and ADD STEREO LED turns solid. MAIN Sound Tower is Bluetooth PAIRING LED blinks. The MAIN Sound Tower outputs left channel sound and the SUB Sound Tower outputs right channel sound. Play music by connecting your mobile device to the MAIN Sound Tower via Bluetooth. Sound is output from both Sound Tower. ENG - 12 NOTES Environmental conditions or other factors with connected devices may have effect on playback quality. If the red LED is on the ADD STEREO, an error has occurred in the Stereo Group connection. Try step 1 and step 2 again. Remote Controller, BT PAIRING, GROUP PLAY and Source buttons on the SUB Sound Tower are disabled while in Stereo Group mode. The GROUP PLAY button on the MAIN Sound Tower is not available while in Stereo Group mode. In mode other than BT (ex. USB, AUX mode), music is played only in MAIN Sound Tower and music is not played in SUB Sound Tower. The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary. This product does not support aptX audio stream with Stereo mode. When using the wireless Stereo mode function, sound from the microphone is only output from the system to which the microphone is connected. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc. Disconnecting the wireless Stereo mode Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds while the Stereo Group is connected. Output beep sound and the LED above the ADD STEREO button is off. ENG - 13 Using Stereo Mode of Samsung TV Connect two Sound Tower and use them with Samsung TV to enjoy stereo mode, to cover a larger listening area or to hear greater left and right audio separation. Precondition To use the Stereo mode, both Sound Tower systems must be the same model. When connecting a Sound Tower or TV, make sure it is within 3.28 ft (1 m) distance. Cannot set the mode to Stereo mode when sound tower is connected to TV. If the sound tower is in Group Play mode, need to exit it before using Stereo mode.
White LED on AUX2 white LED on LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP Left Sound Tower
(MAIN) Right Sound Tower
(SUB) Left Sound Tower
(MAIN) Right Sound Tower
(SUB)
Connect two sound towers via stereo mode by press the ADD STEREO button on the two Sound Tower.
In BT mode, press the AUX button on the MAIN Sound Tower remote control for at least 5 seconds. The LED blinks on the ADD STEREO button.
Connect the RCA cable to the OUT(Group Play) on the MAIN and AUX2 IN on the SUB as shown by using the RCA cable. When the connection is complete, the ADD STEREO LED turn on and then output beep sound, the SUB top panel AUX2 LED turn on. The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to change the sound channel of the Sound Tower. Connect a TV and MAIN Sound Tower via Bluetooth to play music. Sound is output from both Sound Tower. ENG - 14 NOTES Analog audio cables are not supplied. When light bar blinks pink and output beep sound, an error in the Stereo mode connection. Try Step 1 to 3 again. In Stereo Group mode, the remote control, BT PAIRING, GROUP PLAY, and Source buttons on the SUB Sound Tower are disabled. The GROUP PLAY button on the MAIN Sound Tower is not available in Stereo Group mode. If Samsung TV supports a simple connection, the connection pop-up is automatically displayed on the TV, and if you select Yes, it connects to the TV. If there is a previous connection history between Samsung TV and Sound Tower, it will be connected to Samsung TV without pop-up. For a simple connection to Samsung TV. The lighting colors may vary between the MAIN Sound Tower and the SUB Sound Tower. When the microphone operating on the MAIN, the MIC sound is output to the SUB. Disconnecting Stereo mode connection Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is connected. Sound tower will be output beep sound and the LED on the ADD STEREO button turns off. ENG - 15 04 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external devices sound through the Sound Tower. Connecting an External Device via Analog Audio Cable A phone jack or RCA cable is a physical connection that transfers analog audio signals. Mobile device / MP3 / PMP 0.14 inches (3.5 mm) stereo cable
(not supplied)
Rear of the Sound Tower AUX 1 ECHO 1 VOL 1 MIC 1
Audio (AUX) Cable (not supplied) AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A) POWER R
- AUDIO -
L BD / DVD player / Set-top box / Game console
0.14 inches (3.5 mm) stereo Cable (AUX1) 1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an 0.14 inches (3.5 mm) stereo cable. 2. Select AUX1 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control.
RCA Cable (AUX2) 1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device using an RCA cable. 2. Select AUX2 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control. ENG - 16 NOTES Analog audio cables are not supplied. Depending on the length or characteristics of the cable, there may be a difference in operating distance. AUX1 and AUX2 does not support wireless Stereo and Group Play mode. Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. Precondition When connecting to a new BT device, make sure it is within 3.28 ft (1 m) distance. Disconnect from Samsung TV before connect to mobile device. SUB speaker cant connect to BT when in the Group Play or Stereo mode. Blue Blinks OR Bluetooth device Pairing
(blinks) Connected 1. Press the PAIRING button on the rear panel of sound tower.
(OR) Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the BT PAIRING mode. 2. On your device, select [AV] MX-ST9B Series from the list that appears. After the device is connected. The light bar will be all show cyan, and the Bluetooth light on the rear panel is steady on. 3. Play music files from the device connected via Bluetooth through the Sound Tower. NOTES If the device fails to connect Sound tower will output beep sound via BT disconnected. If a previously connected Sound Tower listing (e.g. [AV] MX-ST9B Series) appears in the list, delete it. Then repeat steps 1 and 2. Bluetooth connection In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Sound Tower and the Bluetooth device exceeds 32.8 ft (10 meters). ENG - 17 The Sound Tower automatically turns off after 20 minutes in the Ready state. The Sound Tower may not perform Bluetooth search or connection correctly under the following circumstances:
If there is a strong electrical field around the Sound Tower. If several Bluetooth devices are simultaneously paired with the Sound Tower. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc. What is the difference between BT READY and BT PAIRING?
BT READY : In this mode, you can use the previously connected TV or mobile device to connect to Sound Tower. BT PAIRING : In this mode, you can connect a new device to the Sound Tower.
(Press and hold the PAIRING button on the remote control for more than 5 seconds or press the PAIRING button on the rear of the Sound Tower to enter the BT PAIRING mode.) Using Bluetooth Multi connection The Sound Tower can be connected to 2 Bluetooth devices at the same time. Precondition When connecting to a new BT device, make sure it is within 3.28 ft (1 m) distance. Disconnect from Samsung TV before connect to mobile device. SUB speaker cant connect to BT when in the Group Play or Stereo mode. Bluetooth Multi Connection Indicator Description LED Indicator Blue fast blink Connecting Light Bar Cyan blink Blue solid Cyan blink once Connected Failed Blue blink Pink blink once Bluetooth device 1 Bluetooth device 2 ENG - 18 1. Make your Sound Tower BT PAIRING mode and connect each mobile device. 2. On your device, select [AV]MX-ST9B Series from the list that appears. 3. When the Sound Tower is connected to two mobile devices, The light bar will be all show cyan, and the Bluetooth light on the rear panel is steady on. How to operate Bluetooth Multi Connection Function Play music from one of the connected Bluetooth devices while two devices are connected. If music is played from the Bluetooth device B while playing from the device A, the music is started playing on the device B and automatically being stopped/paused playback on the device A. NOTES When connecting to Samsung TV, the BT multi connection will automatically disconnect If you want to connect Sound Tower to a third device, you can disconnect Sound Tower from one of the two currently connected devices and then connect Sound Tower to the third device. With the Sound Tower and two devices currently connected, when pairing to a new Bluetooth device, the devices currently connected maybe disconnected. Environmental conditions or other factors with connected devices may have effect on playback quality. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc. Bluetooth Multi connection may not be supported depending on the connected devices specifications. Removable/detachable Bluetooth devices (Ex: Dongle etc..), windows phone, laptops, TV, etc. do not support Bluetooth Multi connection. After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing depending on the Bluetooth devices. If you move too far out of range from the Sound Tower without first disconnecting your Bluetooth device, it may take a few minutes to connect other Bluetooth devices. If you turn the Sound Tower off and back on, you can connect other Bluetooth devices without waiting. Disconnecting the Sound tower from the Bluetooth device Press the Source button on the top panel or on the remote control, and then change to any mode except BT. Disconnecting takes time because the Bluetooth device must receive a response from the Sound tower. When the Soundtower is disconnected from the Bluetooth device,The sound tower will output the beep sound. ENG - 19 Using Bluetooth Power On When the Sound Tower is turned off, you can connect your smart device via a Bluetooth connection to turn it on. 1. Press and hold the BASS button on the remote control or on the top panel to set the Bluetooth Power On function on. Lighting bar will be blink white once. 2. When the Sound Tower is off, connect your smart device via Bluetooth. (For information on Bluetooth connections, refer to your smart devices manual.) 3. When the connection is complete, the Sound Tower turns itself on automatically in Bluetooth mode. Select the desired music to play from your smart device. NOTE Each time you press and hold the BASS button for 5 seconds. LED lighting bar will be blink white once and status switched:
BLUETOOTH POWER-ONBLUETOOTH POWER-OFF Connecting a Samsung TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
(Only one TV can be connected at a time) Precondition When connecting to a new BT device, make sure it is within 3.28 ft (1 m) distance. While in wireless Group Play or Stereo mode, searching TV is not available. If the Samsung TV doesnt support Easy Connection function, SEARCHING TV mode can not connect to TV, make your Sound Tower BT PAIRING mode and connect Samsung TV. OR LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT Pairing(blinks) Connected 1. Press and hold
(Source) bottom for more than 5 seconds on remote control or top panel then Sound Tower will start to search Samsung TV. Lighting bar will blink white once and then blink cyan, The back plane PAIRING LED will be slow blink.
(Or, when the wired Stereo Groupmode connection is complete, the SEARCHING TV mode is automatically activated.) 2. If Samsung TV has connected with Sound Tower before, Samsung TV will be connected without popup. ENG - 20 3. Play music files from the device connected via Bluetooth through the Sound Tower. If Sound Tower can not find any Samsung TV within 5 minutes, Sound Tower will terminate SEARCHING TV mode and turn to BT PARING mode. If find any Samsung TV, Sound Tower will request connect to those TV. NOTES To stop searching Samsung TV, turn off the Sound Tower or press the
(Source) or PAIRING button. Sound Tower does not support multi connection if Samsung TV is connected. While Samsung TV is connected, Sound mode is PARTY and SOUND MODE button is not available. While Samsung TV is connected, Sound Tower APP can not connect with Sound Tower. Connection popup may not be displayed according to TV spec, you can try press the PAIRING button on the rear panel of sound tower, On your Samsung TV, select [AV] MX-ST9B Series from the list that appears. You can select and connect directly from the Bluetooth speaker list on your TV when the connection pop-up does not appear on your TV. When the Sound Tower is connected to your TV by Bluetooth connection, the video on the TV and audio from the Sound Tower may not be synchronized because the distance between the Sound Tower and the TV is too far. ENG - 21 05 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Sound Tower. Rear of the Sound Tower USB1 white LED on LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT OR AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A) USB1
(5V 2.1A) USB2
(5V 0.5A) OR USB2 white LED on POWER USB storage device
(not supplied) 1. Connect a USB storage device to the USB jacks on your Sound Tower. 2. Press the
(Source) button on the top panel or USB button of remote control, and then select USB. 3. The USB indicator on the top panel is steady on. And then read the files on the USB, Lighting LED will be blink blue. After reading the music file, the sound tower will automatically play the music. The lighting LED will blinks white once when press the button(TEMPO+/-, Repeat, FOLDER UP/DOWN, Play/
Pause, Skip) on remote control. Using with the Sound Tower App can get better experience. CAUTION DO NOT connect microphone dongle to the USB port, it may damage the Sound Tower. NOTES This product only supports USB storage device that are formatted in the FAT and FAT32 file system. This product does not support HDD storage or storage on mobile devices. A maximum of 999 files can be played per USB storage device. A maximum of 256 folders can be read per USB storage device. The Sound Tower automatically turns off (Auto Power Down) if USB device is not connected, playback stopped, or there is no input for more than 18 minutes USB source does not support wireless Stereo and Group Play mode. ENG - 22 Supported Audio Formats File Extension Audio Codec Sampling Rate Bit Rate MPEG 1 Layer3 32 kHz ~ 48 kHz 32 kbps ~ 320 kbps
*.mp3 MPEG 2 Layer3 16 kHz ~ 24 kHz 8 kbps ~ 160 kbps MPEG 2.5 Layer3 8 kHz ~ 12 kHz 8 kbps ~ 160 kbps
*.wma WMA7/8/9 8 kHz ~ 48 kHz 32 kbps ~ 320 kbps AAC AAC-LC HE-AAC PCM/LPCM/
IMA_ADPCM 8 kHz ~ 96 kHz 8 kHz ~ 96 kHz 8 kHz ~ 96 kHz
< 1728 kbps
< 1728 kbps
< 1728 kbps 8 kHz ~ 192 kHz
< 5 Mbps
8 kHz ~ 192 kHz
< 5 Mbps
*.aac
*.wav
*flac NOTES This product does not support WMA Professional codec. The above table shows supported sampling rates and bit rates. Files in formats that are not supported will not play. AAC files only support the ADTS native format. Software Update Samsung may offer updates for the Sound Towers system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB1 or USB2 port on your Sound Tower. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.com/us/support/. Then, enter or select the model number of your Sound Tower, select the Software & Apps option, and then Downloads. Note that the option names can vary. NOTE If the upgrade takes more than 10 minutes, it means the upgrade process is stuck, Please unplug the power cord Wait until the sound tower is powered off and plug it back in again, Make sure the USB device is in the USB2 port, wait 1 minute, sound tower will automatically restart, and then upgrade until the upgrade is complete. ENG - 23 Connecting an Optional Microphone You can output your voice from the system by connecting a dynamic microphone with a normal plug. AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A) AUX 1 ECHO 1 VOL 1 MIC 1 MIC 2 VOL 2 ECHO 2 USB1
(5V 2.1A) USB2
(5V 0.5A) MIN MAX MIN MAX POWER Microphone(Not supplied) 1. Open the rear panel cover. 2. Turn the MIC1/2, VOL1/2 & ECHO1/2 knob to MIN to reduce the microphone level. 3. Connect an optional microphone to the MIC jack on the unit. 4. Adjust the volume using the MIC VOL1/2 knob. 5. Adjust the Effect of the echo using the MIC ECHO1/2 knob. 6. Speak or sing into the connected microphone. NOTES Microphone is not supplied. When using the wireless Group Play or stereo mode function, sound from the microphone is only output from the system to which the microphone is connected. It may happen sound noise or distortion according to the characteristics of the microphone. ENG - 24 06 USING THE REMOTE CONTROL How to Use the Remote Control
LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP LIGHT BASS
PAIRING
SOUND MODE EFFECT DOWN
LIGHT
PAIRING SOUND MODE EFFECT
DOWN Power USB LIGHT LIGHT Lighting LED white blink x1 DJ PAIRING EFFECT SOUND MODE UP EFFECT USB Source AUX DOWN TEMPO Lighting LED white blink x1 LIGHT EFFECT DJ
BASS PAIRING UP Bluetooth SOUND MODE PAIRING Lighting LED EFFECT Cyan blinks Turn the Sound Tower on and off. AUX TEMPO
(LIGHT) button to turn the Press the Lighting Mode on.
(Only during music playback is effective) AUX Press the button repeatedly to cycle through the available light modes: AMBIENT, PARTY, DANCE, THUNDERBOLT, STAR or OFF. USB TEMPO EFFECT Press to select a source connected to the Sound Tower. DJ Press the button repeatedly to cycle through the available sources: BT, USB1, USB2, AUX1 or AUX2. UP White LED moves to right on LED indicator on the top of the product USB Press to select a source connected directly to
"BT" mode. AUX TEMPO Press and hold the button for more than 5 seconds to enter the "BT PAIRING" mode. You can connect the Sound Tower to a new Bluetooth device in this mode by selecting the DJ Sound Tower from the Bluetooth device's search list. EFFECT BASS DOWN white LED on UP LED indicator on the top of the product Press to select the USB1 or USB2 source connected to the Sound Tower. AUX USB1 white LED on USB2 white LED on TEMPO OR LED indicator on the top of the product USB USB Lighting LED white blink x1 LIGHT BASS
PAIRING SOUND MODE EFFECT DJ EFFECT BASS ENG - 25 DOWN UP BASS LIGHT
USB AUX PAIRING SOUND MODE EFFECT TEMPO AUX LIGHT Lighting LED white blink x1 EFFECT PAIRING SOUND MODE DJ
DOWN UP SOUND MODE EFFECT Lighting LED white blink x1 DJ DOWN AUX TEMPO LIGHT USB PAIRING SOUND MODE EFFECT
LIGHT BASS PAIRING DJ SOUND MODE USB TEMPO +, -
EFFECT Lighting LED white blink x1 AUX TEMPO Press to select the AUX1 or AUX2 sources connected to the Sound Tower. AUX1 white LED on AUX2 white LED on OR LED indicator on the top of the product USB AUX TEMPO EFFECT Press the button repeatedly to cycle through the available sound effects: PARTY, STANDARD, HIPHOP, EDM, ROCK, LATIN, HOUSE or REGGAE. PARTY: Term for more upbeat music effect ,like a party Standard: Term for raw musical effects, like no EQ. HIPHOP: term for Dynamic dance and music. EDM: A more generalized concept genre than electronic music. ROCK: Band music. LATIN: Term for the music of many South American countries. HOUSE: Fast beat dance music played on electronic instruments. REGGAE: Unique Jamaican Music. UP Press the TEMPO + or TEMPO - buttons to change the tempo of the music up or down. This function only works in the USB1 and USB2 mode. DOWN UP BASS
EFFECT DJ DJ LIGHT LIGHT DOWN UP Lighting LED white blink x1 USB USB AUX PAIRING PAIRING SOUND MODE SOUND MODE LIGHT BASS EFFECT USB EFFECT DJ PAIRING EFFECT DJ EFFECT This function lets you turn on the DJ effect function. Press the button repeatedly to cycle through the available DJ sound effects:
NOISE, FILTER, CRUSH, CHORUS, WAHWAH or OFF. NOISE: Mixing white noise into the original sound. FILTER: Filter out the sound of some frequencies. CRUSH: Make the original sound sharp. CHORUS: Separate the original sound into several track and delay them AUX TEMPO separately,then mix again. Create a chorus effect. TEMPO WAHWAH: WAHWAH effect created by enhancing some specific frequencies of original sound. AUX EFFECT Press the EFFECT + or EFFECT - buttons to change the level of the each DJ sound effect up or down. Effect value default is 5, can be changed to 15 ~ 0 ~ +15 TEMPO UP EFFECT +, -
SOUND MODE Lighting LED DOWN BASS white blink x1 UP DOWN
EFFECT DJ EFFECT Press the
(DOWN) button to move to the next folder in the USB device. DOWN UP Folder DOWN Lighting LED white blink x1 BASS BASS BASS ENG - 26 LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT
DOWN UP Folder UP Lighting LED white blink x1
BASS LIGHT Volume up, Volume down /
Skip USB PAIRING Lighting LED White blink x1 SOUND MODE From down to up EFFECT From top to bottom DJ LIGHT
USB PAIRING SOUND MODE EFFECT DJ Press the
(UP) button to move to the previous folder in the USB device. Volume up, Volume down Press the down.
(Volume up) or
(Volume down) to adjust the volume level up or button to select the next music file. If the playing time is less than button to select the previous music, otherwise play the current Music Skip Press the 3s, press the music again. Press and hold the button or the play mode to Fast Foward or Fast reverse. Press and hold the button for more than 3 seconds again to get back to normal play. button for more than 3 seconds in USB button or the AUX TEMPO EFFECT AUX DOWN TEMPO Press the button to pause a music file temporarily. When you press the button again, the music file plays. Auto Power Down Function UP Play / Pause Lighting LED white blink x1 EFFECT To turn off Auto Power Down function while the unit is in AUX1, AUX2 mode, press and hold the once. button for more than 5 seconds. Lighting bar will be blink white
DOWN UP Press the Press it again to unmute the sound.
(Mute) button to mute the sound. Mute BASS Lighting LED white blink x1
Repeat BASS Lighting LED white blink x1
(Repeat) button to use the Repeat function in USB1 and USB2 mode. Press the Press the button repeatedly to cycle through the available repeat functions:
ONE, FOLDER, ALL, RANDOM or OFF. ENG - 27 LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP Press the BASS button to use the powerful bass sound. Press it again to return to the normal sound. Press and hold the BASS button for more than 5 seconds to turn on or off the BLUETOOTH POWER function. The remote control button function is not available in the current source.
BASS BASS Lighting LED white blink x1 Not available Lighting LED Pink blink x1 From middle to end How to use Sound Mode Your Sound Tower provides predefined equalizer settings that are optimized for particular music genres. 1. Press the SOUND MODE button on the Remote control. 2. Each time you press the SOUND MODE button, the Sound Tower cycles through the available sound effects: PARTY, STANDARD, HIPHOP, EDM, ROCK, LATIN, HOUSE or REGGAE. NOTES Default sound mode is PARTY. When turned off, press and hold the button on product or remote control for more than 5 seconds to turn on in the default Sound Mode setting. ENG - 28 How to use the DJ Effect The DJ Effect function lets you add DJ sound effects to your music. The level of each effect is adjustable. 1. Press the DJ button on the Remote control. 2. Each time you press the DJ button, the Sound Tower cycles through the available DJ Effects:
NOISE: Create white noise and mixed with the original sound through the filter and output. FILTER : Creates an effect similar to the sound of only treble or bass. CRUSH: Creates an effect that makes the original sound sharper. CHORUS : Creates an effect similar to a singing chorus. WAHWAH : Creates a Wah~ Wah~ effect. DJ EFFECT OFF : Turns off the DJ Effect. 3. Press the EFFECT + or EFFECT - buttons to raise or lower the level of each of the DJ sound effects from -15 to +15. NOTE When turned off, press and hold the button on product or remote control for more than 5 seconds to turn on in the default DJ Effect setting. ENG - 29 07 USING THE SAMSUNG SOUND TOWER APP Install Samsung Sound Tower App To control this product with your Smart Device and the Samsung Sound Tower app, download the Samsung Sound Tower App from the Google Play Store or Apple App Store, and install it on your Smart Device. Using the Samsung Sound Tower App You can control the system more flexibly and enjoy it in new ways using the App. Precondition This function may not be supported, depending on the mobile device. App cannot use when connecting with Samsung TV. This function is compatible with Apple mobile devices running iOS 11.0 or later. This function is compatible with Android mobile phone devices running Android OS 8.0. App cannot use when using Bluetooth multi connection. Market search : Samsung Sound Tower Samsung Multiroom Samsung Sound Tower Samsung Sound Tower 1. Download the Samsung Sound Tower App from the Google Play Store or Apple App Store, and install it on your Smart Device. 2. Turn on the Sound Tower app on your mobile device. 3. A connection is established between the mobile device and Sound tower via Bluetooth. 4. Play audio from the mobile device through the Sound tower ENG - 30 What you can do with Samsung Sound Tower App:
Balance the sound using preset EQs or custom EQs. Change the sound effect using DJ EFFECT. Configure the various settings for the system. Change the light effect by preset or custom. Adjust the Volume. Switch source NOTES To use this function, update the Sound tower app to the latest version. The function may not be supported, depending on the app version. The Sound tower app may not work if there are devices near the Sound tower that cause radio interference such as electric devices. Make sure devices that may cause radio interference are placed at a sufficient distance away from the Sound tower. If the sound tower app doesnt work:
Reboot the mobile device. Update the Sound Tower app to the latest version. Reinstall the Sound Tower app after uninstalling. Update the phone system version. ENG - 31 08 TROUBLE SHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Sound Tower does not turn on.
; Remove the power plug, after a while
; Power cannot be turned on via remote control or mobile Party Audio App, Remove the power plug, after a while plug-in it again, Press the POWER button to turn on the Sound Tower. Sound Tower works erratically.
; Remove the power plug, after a while plug-in it again, Press the POWER button to turn on the Sound Tower.
; Power cycle the external device and try again.
; If there is no signal, the Sound Tower automatically turns off after a certain period of time. Press the POWER button to turn on the Sound Tower. If the remote control does not work.
; Point the remote directly at the Sound Tower.
; Replace the batteries with new ones. Sound Tower does not output any sound via Bluetooth.
; The volume of the Sound Tower is too low or muted. Press the volume up button to increase the volume.
; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, Increase the volume of the external device.
; For sound output of the TV, select Sound Tower. (Samsung TV: Home Menu Settings All Settings Sound Sound Output Select Sound Tower). plug-in it again, Press the POWER button to turn on the Sound Tower.
; When connecting a new device, switch to BT PAIRING for connection. (Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the BT PAIRING mode, or single-click the PAIRING button on the rear panel.) Sound Tower does not connect via Bluetooth.
; If the Sound Tower is connected to another device, disconnect that device first to switch the device.
; Enable the Bluetooth pairing function of the Bluetooth device and Sound Tower.
; It is recommended to move the Sound Tower closer to your Bluetooth device within 3.3 ft (1 meter).
; Remove the power plug, after a while plug-in it again, Press the POWER button to turn on the Sound Tower. Sound drops out when connected via Bluetooth.
; Some devices can cause radio if they are located too close to the sound tower. e. g. microwaves, wireless routers, etc.
; If your device that is connected via Bluetooth moves too far away from the Sound Tower. Move the device closer to the Sound Tower. ENG - 32
; If there are obstacles between the Sound Tower and your Bluetooth device, remove or avoid the obstacles.
; There maybe sound drop when connect to Samsung TV, please refer to page15 Using Stereo Mode of Samsung TV steps to reconnect the Samsung TV.
; The recommended operating distance between Sound Tower and the BT device is less than 32.8 ft (10 meters) There is severe hum, noise, or distorted sound when connected via Bluetooth.
; If there are obstacles between the Sound tower and your Bluetooth device, remove or avoid the obstacles.
; Some devices can cause radio interference if they are located too close to the sound tower. e. g. microwaves, wireless routers, etc. The PAIRING button is not working.
; Try again after disconnecting the wireless Group Play or Stereo mode connection. The USB device is not recognized.
; Switch the source to USB1/USB2 by press the source button, plug-in the USB device to correct port(USB1/USB2).
; Turn off the sound tower, turn on the sound tower, reconnect the USB device.
; You may using an unsupported USB device. Suggest format the USB storage device to FAT or FAT32 file system. Files in USB device cannot be played back.
; Switch the source to USB1/USB2 by press the source button, plug-in the USB device to correct port(USB1/USB2).
; You may using an unsupported USB device. Suggest format the USB storage device to FAT or FAT32 file system.
; The file format may not supported. Sound tower only supports MP3,WMA,AAC,WAV and FLAC file format.
; Turn off the sound tower ,turn on the sound tower, reconnect the USB device.
; Files that are encrypted or protected by passwords cannot be played back. The connected USB device cannot be charged.
; USB port is only for USB storage device playback. Sound Tower does not output any sound via AUX.
; Make sure the external device is in AUX output mode, and make sure sound tower switch to AUX1 or AUX2 source.
; Make sure the AUX cable is connected to AUX1 or AUX2 securely.
; The volume of the Sound Tower is too low or muted. Adjust the volume.
; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.
; Remove the power plug, after a while plug-in it again, Press the POWER button to turn on the Sound Tower. ENG - 33 Stereo mode connection is not working. BT power on not working.
; The Add Stereo button can not use in Group Play mode, disconnect the wireless Group
; Remove the power plug, after a while plug-in it again, Press the POWER button to Play mode and try Stereo mode connection turn on the Sound Tower. How to use the water resistant function?
; Water resistant can be met when any Jack or AC power cord is plug-in, but make sure that the caps are closed completely. Product cannot be dumped to ensure it is water resistant. I cannot change wireless Stereo mode to wired Stereo mode.
; Make sure the HOST(main) system is in Bluetooth source. I cannot change the source.
; The SUB cant change the source in Stereo mode. If the sound tower app doesnt work.
; Reboot the mobile device.
; Update the Sound Tower app to the latest version. Reinstall the Sound Tower app after uninstalling. Update the phone system version.
; This function is compatible with Apple mobile devices running iOS 11.0 or later.
; This function is compatible with Android mobile phone devices running Android OS 8.0 or later. again. I want to switch the HOST (MAIN) system to the other in wireless Group Play or Stereo Group connection.
; Disconnect Group Play mode, press the Speaker which you want make to HOST first, and after it use Group LED to judge instead connect the others one by one.
; With Stereo Group mode, MAIN is fixed. You can not change others as MAIN. I cant connect a SUB to Group play.
; After 1 hour, the HOST will block any additional SUB from being added. Press the GROUP PLAY button on HOST, the SUB can be reconnected. I cannot make a Wireless/ Wired Group/
Add Stereo/ Bluetooth connection.
; It is recommended to make a Wireless/
Wired Group/ Add Stereo/ Bluetooth pairing within 3.3 ft (1 meter) from the system.
; Sound Tower can not connect to Samsung TV when using Wireless add Stereo mode. MIC is not working?
; Adjust the VOL knob of the rear panel.
; MIC only works on the connected sound tower in the group mode, cant works on both sound towers.
; Try disconnect and reconnect the Microphone again. ENG - 34 09 LICENSE The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
[ENERGY STAR]
ENERGY STAR qualified model only Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program. ENERGY STAR qualified model only
(Applicable to Thin Client models only) As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR Program has been to reduced greenhouse gas emissions and save energy through voluntary labeling. Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours. The product can wake with a button press on the chassis from sleep mode. ENERGY STAR qualified model only (The other models) As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency. ENG - 35 10 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com). 11 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair. ENG - 36 12 SPECIFICATIONS AND GUIDE Specifications Model Name USB1/USB2 Weight Dimensions (W x H x D) MX-ST90B USB1: 5V/2.1A USB2: 5V/0.5A 54.6lbs(24.8kg) 16.7X33.8X15.1 inches
(424X858X383mm) Operating Temperature Range
+41F to +95F (+5C to +35C) Operating Humidity Range AMPLIFIER Rated Output power Overall Power Consumption NOTES 10 % ~ 75 %
1700 W 150W Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. ENG - 37 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
http://www.samsung.com/us/peaceofmind/authorized_resellers.html. QUESTIONS OR COMMENTS?
Country Samsung Service Center Web Site Address IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridge eld Park, NJ 07660 2022 Samsung Electronics Co., Ltd. All rights reserved.
1 2 | External Photos | External Photos | 550.14 KiB | May 09 2022 / November 11 2022 | delayed release |
1 2 | Label and Label Location | ID Label/Location Info | 3.54 MiB | May 09 2022 / May 15 2022 |
110-120V 100-240V 110-127V 110-240V MODEL / MODELE NO. : MX-ST90B MODEL CODE : MX-ST90B/ZA AC110-120V~ 50/60Hz 150W MODEL / MODELE NO. : MX-ST90B MODEL CODE : MX-ST90B/ZA AC100-240V~ 50/60Hz 150W MODEL / MODELE NO. : MX-ST90B MODEL CODE : MX-ST90B/ZA AC110-127V~ 50/60Hz 150W MODEL / MODELE NO. : MX-ST90B MODEL CODE : MX-ST90B/ZA AC110-240V~ 50/60Hz 150W MFD. / FABRIQUE:JANUARY 2022 S/N:5FP514PT300001L FCC ID:A3LMXST90B MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ) TSCA Title VI compliant MFD. / FABRIQUE:JANUARY 2022 S/N:5FP514PT300001L FCC ID:A3LMXST90B MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ) TSCA Title VI compliant MFD. / FABRIQUE:JANUARY 2022 S/N:5FP514PT300001L FCC ID:A3LMXST90B MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ) TSCA Title VI compliant MFD. / FABRIQUE:JANUARY 2022 S/N:5FP514PT300001L FCC ID:A3LMXST90B MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ) TSCA Title VI compliant label location:
1 2 | Authorization Letter | Cover Letter(s) | 100.85 KiB | May 09 2022 / May 15 2022 |
Samsung Electronics Co Ltd Date: 4/18/2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;
endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:
Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Date: 4/18/2022
1 2 | Confidentiality Request Letter -1 | Cover Letter(s) | 75.76 KiB | May 09 2022 / May 15 2022 |
Samsung Electronics Co Ltd A3LMXST90B Request for Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:
FCC ID:
To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Date: 04/27/2022
1 2 | Confidentiality Request Letter -2 | Cover Letter(s) | 21.90 KiB | May 09 2022 / May 15 2022 |
Samsung Electronics Co Ltd DATE : 04/27/2022 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Request for Short-Term Confidentiality Company name:
FCC ID: A3LMXST90B FCC Part 15 Certification Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:
(1) Test Setup Photos
(2) External Photos
(3) Internal Photos
(4) User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Date: 04/27/2022
1 2 | Declaration Letter | Cover Letter(s) | 70.50 KiB | May 09 2022 / May 15 2022 |
Samsung Electronics Co Ltd Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Confirmation Letter We, Samsung Electronics Co Ltd The product: Sound Tower And model No.: MX-ST9**, MX-ST9*****
FCC ID: A3LMXST90B MX-ST9**, MX-ST9***** (* represents any alphanumeric character, -, / or Blank)have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with MX-ST90B. We select Sound Tower with model number with MX-ST90B as the representative model for compliance test. The difference lies only model number and marketing purpose. ______________________ Contact personJenni Chun Date04/27/2022
1 2 | Setup Photos | Test Setup Photos | 386.90 KiB | May 09 2022 / November 11 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-05-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-05-15
|
||||
1 2 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0027908797
|
||||
1 2 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 2 |
Pine Brook, New Jersey 07058
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
A3L
|
||||
1 2 | Equipment Product Code |
MXST90B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** C********
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
973-8********
|
||||
1 2 | Fax Number |
973-8********
|
||||
1 2 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/11/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Sound Tower | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filling. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
1 2 | Name |
S******** G****
|
||||
1 2 | Telephone Number |
+86 0********
|
||||
1 2 |
S******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0079000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0074000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC