all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual -1 | Users Manual | 720.11 KiB | December 22 2020 / June 20 2021 | delayed release | ||
1 |
|
User Manual -2 | Users Manual | 5.28 MiB | December 22 2020 / June 20 2021 | delayed release | ||
1 |
|
User Manual -3 | Users Manual | 2.39 MiB | December 22 2020 / June 20 2021 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 1.65 MiB | December 22 2020 / June 20 2021 | delayed release | ||
1 |
|
External Photos | External Photos | 660.59 KiB | December 22 2020 / June 20 2021 | delayed release | ||
1 |
|
Label and Label Location | ID Label/Location Info | 1.45 MiB | December 22 2020 / December 23 2020 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 116.23 KiB | December 22 2020 / December 23 2020 | |||
1 | Block Diagram | Block Diagram | December 22 2020 | confidential | ||||
1 | Circuit diagram | Schematics | December 22 2020 | confidential | ||||
1 |
|
Confidentiality Request Letter -1 | Cover Letter(s) | 74.95 KiB | December 22 2020 / December 23 2020 | |||
1 |
|
Confidentiality Request Letter -2 | Cover Letter(s) | 21.87 KiB | December 22 2020 / December 23 2020 | |||
1 |
|
Declaration Letter | Cover Letter(s) | 76.97 KiB | December 22 2020 / December 23 2020 | |||
1 | Operational Description | Operational Description | December 22 2020 | confidential | ||||
1 | RF Exposure Info | 200.58 KiB | December 22 2020 / December 23 2020 | |||||
1 |
|
Setup Photos | Test Setup Photos | 651.94 KiB | December 22 2020 / June 20 2021 | delayed release | ||
1 | Test Report | 5.66 MiB | December 22 2020 / December 23 2020 | |||||
1 |
|
Test Report -1 | Cover Letter(s) | 5.43 MiB | December 25 2020 / December 23 2020 |
1 | User Manual -1 | Users Manual | 720.11 KiB | December 22 2020 / June 20 2021 | delayed release |
01 USING THE REMOTE CONTROL
Power button
(Source) button Press to select a source connected to the Soundbar.
Bluetooth PAIR button Switch the Soundbar to Bluetooth pairing mode.
Up/Down/Left/Right button
p (Play / Pause) button
(Mute) button
SOUND MODE button You can select the desired sound effect.
(Sound Control) button
When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence. The desired settings can be adjusted using the Up/Down buttons.
VOL (Volume) button
WOOFER (BASS) LEVEL button Push the button up or down to adjust the level of the woofer (bass). 02 INSTALLING THE WALL MOUNT Installation Precautions Install on a vertical wall only. Do not install in a place with high temperature or humidity. Verify whether the wall is strong enough to support the products weight. If not, reinforce the wall or choose another installation point. Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs. Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on. Diameter: M5 Length: 1 3/8 inches (35 mm) or longer recommended. Connect cables from the unit to external devices before you install the Soundbar on the wall. Make sure the unit is turned off and unplugged from the power source before you install it. Otherwise, it may cause an electric shock. SOUNDBARPAIRVOLWOOFERSOUNDMODESOUNDBARPAIRVOLWOOFERSOUNDMODE Components
(AH81-11685A) A B C x 2
(AH81-11684A) D B A C A x 2
(M4 x L10)
(AH81-11683A) x 2
(AH81-13934A) B D A C D B C D 1. 4. A B C D 2 inches (5 cm) or more Center Line A B C D A B C D A B A C B D C D 2. 3. A B C D A B C D Rear of Soundbar Right end of Soundbar 72-ZAA450-WALB2-SS
1 | User Manual -2 | Users Manual | 5.28 MiB | December 22 2020 / June 20 2021 | delayed release |
FULL MANUAL HW-A450 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register SAFETY INFORMATION The following also applies to the Wireless WARNING Subwoofer (PS-WA45T). SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of CAUTION symbols which may be on your Samsung product. Do not expose this apparatus to dripping or To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A):
FCC Compliance Statement :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). AC voltage : Rated voltage marked with this symbol is AC voltage. DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use :
This symbol instructs the user to consult the user manual for further safety related information. ENG - ii FCC Caution :
FCC Radiation Exposure Statement :
Any changes or modifications not expressly This equipment complies with FCC radiation approved by the party responsible for exposure limits set forth for an uncontrolled compliance could void the users authority to environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) This product satisfies FCC regulations when between the radiator and your body. This device shielded cables and connectors are used to and its antenna(s) must not be co-located or connect the unit to other equipment. operated in conjunction with any other antenna or To prevent electromagnetic interference with transmitter. electric appliances, such as radios and televisions, use shielded cables and CALIFORNIA USA ONLY (Applicable for connectors for connections. networking models only.) Class B FCC Statement This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the This equipment has been tested and found to product sold or distributed ONLY in California comply with the limits for a Class B digital device, USA Perchloate Material - special handling may pursuant to Part 15 of the FCC Rules. These limits apply, See www.dtsc.ca.gov/hazardouswaste/
are designed to provide reasonable protection against harmful interference in a residential perchlorate. installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/
recycling Or call, 1800SAMSUNG WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. cause harmful interference to radio or television Important Safety Instructions reception, which can be determined by turning Read these operating instructions carefully the equipment off and on, the user is encouraged before using the unit. Follow all the safety to try to correct the interference by one of the instructions listed below. Keep these operating following measures:
Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. Connecting the equipment to an outlet that is 5. Do not use this apparatus near water. on a different circuit than the radio or TV. 6. Clean only with dry cloth. Consulting the dealer or an experienced 7. Do not block any ventilation openings. radio/TV technician for help. Install in accordance with the manufacturers instructions. ENG - iii 11. Only use attachments/accessories specified 3. Do not expose the unit to direct sunlight or 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. ENG - iv ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.
(http://www.samsung.com/support) Design and specifications are subject to change without prior notice. ENG - v CONTENTS 01 Checking the Components 02 Product Overview Inserting Batteries before using the Remote Control (AA batteries X 2)
------------------------- 2 Front Panel / Top Panel of the Soundbar Bottom Panel of the Soundbar
------------------------- 3
------------------------- 4 03 Connecting the Soundbar Connecting Electrical Power
------------------------- 5 Connecting the Soundbar to the Subwoofer Automatic connection between the Subwoofer and the Soundbar Manually connecting the Subwoofer if automatic connection fails
------------------------- 6
------------------------- 6 7
Connecting an SWA-9100S (Sold Separately) to your Soundbar
------------------------- 9 04 Connecting to your TV Method 1. Connecting with a Cable Connecting using an Optical Cable Method 2. Connecting Wirelessly Connecting a TV via Bluetooth 05 Connecting an External Device 06 Connecting a USB Storage Device 07 Connecting a Mobile Device ENG - vi Connecting using an Optical Cable
------------------------- 14 Connecting via Bluetooth
------------------------- 17 2 3 5 11 14 15 17
------------------------- 11
------------------------- 11
------------------------- 12
------------------------- 12
------------------------- 25
------------------------- 25
------------------------- 28
------------------------- 28 20 25 27 29 30 31 31 32 08 Using the Remote Control How to Use the Remote Control
------------------------- 20 Adjusting the Soundbar volume with a TV remote control
------------------------- 23 Using the Hidden Buttons (Buttons with more than one function)
------------------------- 24 Output specifications for the different sound effect modes
------------------------- 24 09 Installing the Wall Mount Installation Precautions Wallmount Components 10 Software Update Update Procedure If UPDATE is not displayed Troubleshooting 11 12 License 13 Open Source License Notice 14 Important Notes About Service 15 Specifications and Guide ENG - vii Specifications
------------------------- 32 01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR x 2 Soundbar Main Unit Subwoofer Remote Control (AH81-13358A) / Batteries x 2 Power Cord
(Subwoofer, Soundbar)
(AH81-11680A) x 2 x 2 Optical Cable
(AH81-11681A) Wall Mount Guide
(AH81-11685A) Holder-Screw
(AH81-11684A) Screw
(AH81-11683A) Bracket-Wall Mount
(AH81-13934A) For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. The appearance of the accessories may differ slightly from the illustrations above. Inserting Batteries before using the Remote Control (AA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries
(1.5V) oriented so that their polarity is correct. Slide the back cover back into position. ENG - 2 02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar
Position the product so that the SAMSUNG logo is located on the top.
Top Panel
Display Displays the products status and current mode.
(Power) Button
Turns the power on and off. Auto Power Down Function The unit turns off automatically in the following situations:
In D.IN / BT / USB Mode : If there is no audio signal for 18 minutes.
(Volume) Button Adjusts the volume. When adjusted, the volume level appears on the Soundbars front display.
(Source) Button Selects the source input mode. Input mode Optical Digital input BLUETOOTH mode USB mode Display D.IN BT USB To turn on BT PAIRING mode, change the source to BT mode, and then press and hold the
(Source) button for more than 5 seconds. When you plug in the AC cord, the power button will begin working in 4 to 6 seconds. When you turn on this unit, there will be a 4 to 5 second delay before it produces sound. If you want to enjoy sound only from the Soundbar, you must turn off the TVs speakers in the Audio Setup menu of your TV. Refer to the owners manual supplied with your TV. ENG - 3 Bottom Panel of the Soundbar DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A) POWER
DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) POWER
DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.
USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar.
POWER Connect the Soundbar's AC power cable. When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable. Do not connect this unit or other components to an AC outlet until all connections between components are complete. ENG - 4 03 CONNECTING THE SOUNDBAR Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following Connecting Electrical Power order:
1. Connect the power cord to the Subwoofer. 2. Connect the power cord to the Soundbar. See the illustrations below. For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) POWER Power Cord Power Cord USB (5V 0.5A) POWER DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) POWER POWER Connecting Electrical Power Rear of Subwoofer Connecting Electrical Power Bottom of the Soundbar Main Unit ENG - 5 Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on. LED Indicator Lights on the Rear of Subwoofer LED Status Description Resolution On Successfully connected
(normal operation)
Blue Blinking Recovering the connection or wait about 5 minutes. If blinking persists, Check if the power cable attached to the main Soundbar unit is connected properly try manually connecting the subwoofer. See page 7. Standby (with the Soundbar Check if the power cable attached to the main unit turned off) main Soundbar unit is connected properly. Red On Connection failed Red and blue Blinking Malfunction Connect again. See the instructions for manual connection on page 7. See the contact information for the Samsung Service Center in this manual. ENG - 6 Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below:
Check whether the power cables for the Soundbar and subwoofer are connected properly. Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2. Press and hold the Up button on the remote control for at least 5 seconds. The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. The Soundbar will automatically power on when ID SET is complete. A I R P 5 Sec O S N O U M D D E SAMSUNG logo is on the top ID SET 3. Check if the LINK LED is solid blue (connection complete). The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Blue is On Wireless Subwoofer. ENG - 7 NOTES Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. Before moving or installing this product, be sure to turn off the power and disconnect the power cord. If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times. If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption. The maximum transmission distance of the main units wireless signal is about 32.8 ft (10 m), but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all because the wireless signal cannot penetrate metal. PRECAUTIONS and moisture. Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from water For optimal listening performance, make sure that the area around the wireless subwoofer and the Wireless Receiver Module (sold separately) is clear of any obstructions. ENG - 8 Connecting an SWA-9100S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit
(SWA-9100S, sold separately) to your Soundbar. 1. Connect the Wireless Receiver Module to 2 Surround Speakers. When connecting the speaker cable, connect the core wire to the speaker. SURROUND-RIGHT SURROUND-RIGHT The speaker cables are color coded. SURROUND-LEFT SURROUND-RIGHT SURROUND-LEFT SURROUND-RIGHT L R SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3 ID SET L R SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3 POWER ID SET 2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-9100S user manual. SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3 L R 5 Sec SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3 ID SET ID SET STANDBY STANDBY LINK LINK POWER POWER Blue blinking ENG - 9 3. Press and hold the Up button on the remote control for at least 5 seconds. The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. The Soundbar will automatically power on when ID SET is complete. SAMSUNG logo is on the top ID SET A I R P 5 Sec O S N O U M D D E CAUTION If your Soundbar was playing music when it connects to the SWA-9100S, you may hear some stuttering from the woofer as the connection finalizes. 4. Check if the LINK LED is solid blue (connection complete). STANDBY STANDBY LINK LINK Blue is On The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Receiver Module. 5. If the SWA-9100S is not connected, repeat the procedure from Step 2. ENG - 10 04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TVs remote control. This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1. Connecting with a Cable When the audio in a broadcast is encoded in Dolby Digital and the Digital Output Audio Format on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.) Connecting using an Optical Cable Pre-connection Checklist When you use an optical cable and the terminals have covers, be sure to remove the covers. Optical Cable
Top of the Soundbar OPTICAL OUT
Bottom of the Soundbar DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) D.IN ENG - 11 1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable. 2. Press the
(Source) button on the top panel or remote control, and then select the D.IN mode. Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. Only one TV can be connected at a time. OR A I R P O S N O U M D D E The initial connection 1. Press the PAIR button on the remote control to enter the BT PAIRING mode.
(OR) a. Press the
(Source) button on the top panel and then select BT. BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record. b. When BT READY appears, press and hold the
(Source) button on the top panel of the Soundbar for more than 5 seconds to display BT PAIRING. 2. Select Bluetooth mode on the TV. (For more information, see the TVs manual.) 3. Select [AV] Samsung Soundbar A4-Series from the list on TVs screen. An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection. When the TV is connected, [TV Name] BT appears on the Soundbars front display. 4. You can now hear TV sound from the Soundbar. If a previously connected Soundbar listing (e.g. [AV] Samsung Soundbar A4-Series) appears in If the device fails to connect the list, delete it. Then repeat steps 1 through 3. NOTE reconnect. ENG - 12 After you have connected the Soundbar to your TV the first time, use the BT READY mode to Disconnecting the Soundbar from the TV Press the
(Source) button on the top panel or on the remote control and switch to any mode but BT. Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.) To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in BT READY status. (Toggle On Off) What is the difference between BT READY and BT PAIRING?
BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the
(Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in BT mode.) NOTES If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 18 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc. ENG - 13 05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external devices sound through the Soundbar. Connecting using an Optical Cable Optical Cable
OPTICAL OUT Top of the Soundbar BD / DVD player /
Set-top box /
Game console Bottom of the Soundbar DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A)
D.IN 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable. 2. Select D.IN mode by pressing the
(Source) button on the top panel or on the remote control. ENG - 14 06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) POWER USB (5V 0.5A) USB 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the
(Source) button on the top panel or on the remote control, and then select USB. 3. USB appears in the display screen. 4. Play music files from the USB storage device through the Soundbar. The Soundbar automatically turns off (Auto Power Down) if no USB device has been connected for more than 18 minutes. ENG - 15 File Format Type Compatibility list Extension Codec Sampling Rate Bitrate
*.mp3 MPEG 1 Layer2 32kHz ~ 48kHz MPEG 1 Layer3 32kHz ~ 48kHz MPEG 2 Layer3 16kHz ~ 24kHz MPEG 2.5 Layer3 8kHz ~ 12kHz WMA7/8/9/STD 8kHz ~ 48kHz
*.wma
*.aac AAC AAC-LC HE-AAC 8kHz ~ 96kHz
< 1728kbps
*.ogg Vorbis codec
(8, 16, 22.05, 32, 44.1, 48)kHz 32kbps~320kbps 32kbps~320kbps 8kbps~160kbps 8kbps~160kbps 32kbps~320kbps unsupport ogg:
1. block size 0 < 256, block size 0 > 1024 2. block size 1 < 512, block size 1 > 4096 3. codebook counter >
64 4. codebook entry > 640 5. floor counter > 2 6. floor type 0 7. residua counter > 2 8. dimension != 2 9. mapping counter > 2 10. mode counter > 2 11. residue type !=
channel number
< 5Mbps
< 5Mbps
< 5Mbps
*.flac
*.wav
*.AIFF
8kHz ~ 192kHz PCM/LPCM/IMA_ ADPCM/MPEG/MULAW 8kHz ~ 192kHz Compression type:
alwa, ulaw, sowt 2 channels
(8, 16, 22.05, 32, 44.1, 48, 96, 192)kHz If there are too many folders (about 200) and files (about 2000) stored on the USB device, it may take the Soundbar some time to access and play files. ENG - 16 07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. You cannot connect more than one Bluetooth device at a time. OR A I R P O S N O U M D D E Bluetooth device The initial connection 1. Press the PAIR button on the remote control to enter the BT PAIRING mode.
(OR) a. Press the
(Source) button on the top panel and then select BT. BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record. b. When BT READY appears, press and hold the
(Source) button on the top panel of the Soundbar for more than 5 seconds to display BT PAIRING. 2. On your device, select [AV] Samsung Soundbar A4-Series from the list that appears. When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] BT appears in the front display. 3. Play music files from the device connected via Bluetooth through the Soundbar. If a previously connected Soundbar listing (e.g. [AV] Samsung Soundbar A4-Series) appears in If the device fails to connect the list, delete it. Then repeat steps 1 and 2. NOTE mode to reconnect. After you have connected the Soundbar to your mobile device the first time, use the BT READY ENG - 17 What is the difference between BT READY and BT PAIRING?
BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button on the remote control or press and hold the
(Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in BT mode.) NOTES If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 18 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc. The Soundbar supports SBC data (44.1kHz, 48kHz). Connect only to a Bluetooth device that supports the A2DP (AV) function. You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function. mode. Once you have paired the Soundbar to a Bluetooth device, selecting [AV] Samsung Soundbar A4-Series from the devices scanned devices list will automatically change the Soundbar to BT Available only if the Soundbar is listed among the Bluetooth devices paired devices.
(The Bluetooth device and the Soundbar must have been previously paired at least once.) The Soundbar will appear in the Bluetooth devices searched devices list only when the Soundbar is The Soundbar cannot be paired to another Bluetooth device if already in Bluetooth mode and displaying BT READY. paired to a Bluetooth device. Bluetooth Power On (SOUND MODE) If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power On function is on and the Soundbar is turned off, the Soundbar turns on automatically. 1. Press and hold the SOUND MODE button for more than 5 seconds on the remote while the Soundbar is turned on. 2. ON-BLUETOOTH POWER appears on the Soundbars display. ENG - 18 Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth devices user manual. The Soundbar will be disconnected. When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display BT DISCONNECTED on the front display. Disconnecting the Soundbar from the Bluetooth device Press the
(Source) button on the top panel or on the remote control, and then change to any mode Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ, depending on the Bluetooth device) When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display BT DISCONNECTED on the front display. except BT. NOTES In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 18 minutes in the Ready state. More About Bluetooth Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection. A Bluetooth device may cause noise or malfunction, depending on usage, if:
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar. It is subject to electrical variation from obstructions caused by a wall, corner, or office partition. It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs. Pair the Soundbar with the Bluetooth device while they are close together. The further the distance between the Soundbar and Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost. In poor reception areas, the Bluetooth connection may not work properly. The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors. This wireless device may cause electric interference during its operation. ENG - 19 08 USING THE REMOTE CONTROL How to Use the Remote Control
SOUND MODE VOL WOOFER SOUNDBAR
Turns the Soundbar on and off. PAIR Press to select a source connected to the Soundbar. Power Source Press the Press it again to unmute the sound.
(Mute) button to mute the sound. PAIR PAIR SOUND MODE Mute SOUND MODE Press to cycle through the available sound modes:
STANDARD, SURROUND SOUND, BASS BOOST, GAME, or ADAPTIVE . SOUND MODE STANDARD Outputs the original sound. PAIR SURROUND SOUND PAIR VOL Provides a wider sound field than standard. WOOFER BASS BOOST Sound field mode with emphasis on bass SOUND MODE VOL WOOFER SOUND MODE sound. GAME Provides stereoscopic sound to immerse you in the action while gaming. ADAPTIVE Analyzes the content in real time and automatically provides an optimal sound WOOFER field based on the characteristics of the content. VOL WOOFER VOL ENG - 20 DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button for more than 5seconds while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default. Press and hold the SOUND MODE button for more than 5 seconds to turn off the Bluetooth Power function. Press the PAIR button. BT PAIRING appears in the Soundbars display. You can connect the Soundbar to a new Bluetooth device in this mode by selecting the Soundbar from the Bluetooth device's search list. Press the p button to pause a music file temporarily. When you press the button again, the music file plays. Press the indicated areas to select Up/Down/Left/Right. Press Up/Down/Left/Right on the button to select or set functions. To use the Repeat function in USB mode, press the Up button. Repeat Music Skip ID SET VOL WOOFER VOL WOOFER Press the Right button to select the next music file. Press the Left button to select the previous music file. Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless subwoofer or wireless rear speakers). PAIR Bluetooth SOUND MODE PAIR
VOL WOOFER PAIR Play / Pause SOUND Up/Down/
MODE Left/Right PAIR SOUND MODE ENG - 21 Volume Restriction function To protect your hearing, the Volume Restriction function restricts the volume to 20 if you turn on the Soundbar when the volume is set higher than 20. The default value for the Volume Restriction function is Off. You must turn it on to activate it. turned off. When turned on, the Volume Restriction function stays on even when the power is To turn Volume Restriction on or off, press and hold the Down button on the remote control for 5 seconds in standby mode. With Volume Restriction off, V FREE appears on the front display. With the function on, V LOCK appears. Press to cycle through the available Sound Control options: TREBLE, BASS, or AUDIO SYNC. To control the volume of the treble or bass sound, press the Sound Control button to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/
Down buttons. Press and hold the
(Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons. If the video on the TV and audio from the Soundbar are not synchronized, press the Sound Control button to select AUDIO SYNC and then set the audio delay between 0~300milliseconds by using the Up/Down buttons. (Not available in BT and USB mode.) AUDIO SYNC is only supported for some functions.
Sound Control PAIR SOUND MODE
VOL SOUND M ODE
SOUND M ODE W OOFER SO U N D B A R VOL PAIR PAIR SOUND M ODE WOOFER WOOFER W OOFER
(BASS) LEVEL SOUND MODE SO U N D B A R VOL SOUND MODE W OOFER SO U N D B A R VOL SOUND M ODE W OOFER SO U N D B A R VOL Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to
+6. To set the woofer (bass) volume level to 0 (Default), press the button. VOL VOL WOOFER SOUND M ODE SOUND M ODE SOUND M ODE SOUND M ODE
(Volume) VOL WOOFER VOL W OOFER SO U N D B A R W OOFER SO U N D B A R VOL W OOFER SO U N D B A R VOL W OOFER SO U N D B A R VOL Push the button up or down to adjust the volume. Mute Press the VOL button in to mute the sound. Press it in again to unmute the sound. ENG - 22 4. If you want to return the Soundbar to the default mode (control by a Samsung TV remote), push up and hold the WOOFER button for 5 seconds repeatedly until SAMSUNG-TV REMOTE appears in the display. 5 Sec SOUND M ODE W OOFER SO U N D B A R VOL SAMSUNG-TV REMOTE
(Default mode) Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order:
SAMSUNG-TV REMOTE (Default mode) OFFTVREMOTE ALLTVREMOTE. This function may not be available, depending on the remote control. Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA Adjusting the Soundbar volume with a TV remote control If you have a Samsung TV, you can adjust the Soundbars volume using the IR remote control that came with your Samsung TV. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your Samsung remote to control the Soundbars volume. For more information, see the TVs user manual. The default mode for this function is control by a Samsung TV remote. If your TV is not a Samsung TV, follow the directions below to change the settings of this function. 1. Turn Off the Soundbar. OFF 2. If you do not want to use this function, push up and hold the WOOFER button for 5 seconds repeatedly until OFF-TV REMOTE appears in the display. 5 Sec SOUND M ODE W OOFER SO U N D B A R VOL OFF-TV REMOTE 3. If you want to control the Soundbar with your TVs remote, push up and hold the WOOFER button for 5seconds repeatedly until ALL-TV REMOTE appears in the display. Then, use your TVs menu to select external speakers. 5 Sec SOUND M ODE W OOFER SO U N D B A R VOL ALL-TV REMOTE ENG - 23 Using the Hidden Buttons (Buttons with more than one function) Hidden Button Remote Control Button Function Reference page WOOFER (Up) TV remote control On/Off (Standby) p (Play / Pause) Initialize (Standby) Left Up Down TV Auto connect On/Off (BT Ready) ID SET (Standby) Volume Restriction On/Off (Standby)
(Sound Control) 7 Band EQ SOUND MODE DRC ON/OFF (Standby) Bluetooth Power Output specifications for the different sound effect modes Output Without Wireless Rear Speaker Kit With Wireless Rear Speaker Kit Effect Surround Bluetooth POWER SOUND MODE SOUND MODE STANDARD SURROUND SOUND BASS BOOST GAME ADAPTIVE Input 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.0 ch 5.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch 2.1 ch VOL The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the WOOFER vendor you purchased the Soundbar from. page 23 page 28 page 13 page 21 page 22 page 22 page 21 page 21 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch 4.1 ch ENG - 24 09 INSTALLING THE WALL MOUNT Wallmount Components Installation Precautions Install on a vertical wall only. Do not install in a place with high temperature or humidity. Verify whether the wall is strong enough to support the products weight. If not, reinforce the wall or choose another installation point. Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs. Wall Mount Guide (AH81-11685A) x 2 x 2 Holder-Screw
(AH81-11684A) Screw
(AH81-11683A) x 2 Bracket-Wall Mount
(AH81-13934A) Purchase wall mounting screws according to 1. Place the Wall Mount Guide against the wall the type and thickness of the wall you want to surface. mount the Soundbar on. Diameter: M5 The Wall Mount Guide must be level. If your TV is mounted on the wall, install Length: 1 3/8 inches (35 mm) or longer the Soundbar at least 2 inches (5 cm) recommended. below the TV. Connect cables from the unit to external devices before you install the Soundbar on Make sure the unit is turned off and unplugged from the power source before you install it. Otherwise, it may cause an electric the wall. shock. 2 inches (5 cm) or more ENG - 25 2. Align the Wall Mount Guides Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. If you are not mounting below a TV, place the Center Line in the center of the installation area. 6. Install the 2 Bracket-Wall Mounts in the correct orientation on the bottom of the Soundbar using 2 Screws. Center Line 3. Push a pen tip or sharpened pencil tip through the center of the B-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide. When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of the Soundbar. Rear of Soundbar 4. Using an appropriately sized drill bit, drill a hole in the wall at each marking. If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors into the holes before you insert the support screws. If you use anchors, make sure the holes you drill are large enough for the anchors you use. Right end of Soundbar ENG - 26 7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 SOFTWARE UPDATE Insert the Holder-Screws into the wide If an update is offered, you can update the 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
(bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the Holder-Screws. Samsung may offer updates for the Soundbars system firmware in the future. USB port DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) POWER USB (5V 0.5A) firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at https://www.samsung.com/us/support/
downloads/. Then, select the product type or enter the model number of your Soundbar, select the Software &
Apps option, and then Downloads. Note that the option names can vary. ENG - 27 Update Procedure If UPDATE is not displayed Important: The update function erases all user 1. Turn off the Soundbar, disconnect and then settings. We recommend you write down your reconnect the USB storage device that settings so that you can easily reset them after contains the update files to the Soundbars the update. Note that updating the firmware USB port. resets the subwoofer connection too. 2. Disconnect the Soundbars power cord, 1. Connect a USB thumb drive to the USB port reconnect it, and then turn on the Soundbar. on your computer. Important: Make sure there are no music files on the USB thumb drive. This may cause NOTES 3. Save the downloaded software to a USB down your settings so that you can easily The firmware update may not work properly if audio files supported by the Soundbar are stored in the USB storage device. Do not disconnect the power or remove the USB device while updates are being applied. After the update is completed, the user setup in the Soundbar is initialized so you can reset your settings. We recommend you write reset them after the update. Note that updating firmware resets the subwoofer connection too. If the connection to the subwoofer is not re-established automatically after the update, refer to page 6. If the software update fails, check if the USB Mac OS users should use MS-DOS (FAT) as the stick is defective. USB format. Updating via USB may not be available, depending on the USB storage device manufacturer. the firmware update to fail. 2. Go to https://www.samsung.com/us/
support/downloads/ on your computer select Enter Model Number and enter the model of your Soundbar. Select manuals and downloads and download the latest software file. stick and select Extract Here to unzip the folder. 4. Turn off the Soundbar and connect the USB stick containing the software update to the USB port. 5. Turn on the Soundbar and source change to USB mode. Within 3 minutes, UPDATE is displayed and updating begins. 6. When the update finishes, the Soundbar
(Power) turns off (or turns off by press the button). Press the p button on the remote control for 5 seconds. INIT appears on the display and then the Soundbar turns on. The update is complete. This product has a DUAL BOOT function. If the firmware fails to update, you can update the firmware again. Sound bar AC code on when USB in with update file. Then update again but VFD no show anything, It will update finish after 2min. 7. Restore your settings on the Soundbar. ENG - 28 11 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. Is the power cord firmly plugged into the wall outlet?
; Unplug and reconnect the power cord to the wall outlet to make sure the connection is secure. A function does not work when the button is pressed. Is there static electricity in the air?
; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode.
; See the Bluetooth connection sections on pages 12 and 17. Sound is not produced. Is the Mute function on?
; Press the Is the volume set to minimum?
; Adjust the Volume. The remote control does not work.
(Mute) button to cancel the mute function. Are the batteries drained?
; Replace with new batteries. Is the distance between the remote control and Soundbar main unit too far?
; Move the remote control closer to the Soundbar main unit. The red LED on the subwoofer blinks and the subwoofer is not producing sound. This issue can occur if the subwoofer is not connected to the Soundbar main unit.
; Try to connect your subwoofer again. (See page 6.) The subwoofer drones and vibrates noticeably. Try to adjust the vibration of your subwoofer.
; Push the WOOFER button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. ENG - 29 For DTS patents, see http://patents.dts.com. Environmental Protection Agency and 12 LICENSE Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
[ENERGY STAR]
ENERGY STAR qualified model only Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program. ENERGY STAR qualified model only
(Applicable to Thin Client models only) As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR Program has been to reduced greenhouse gas emissions and save energy through voluntary labeling. Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours. The product can wake with a button press on the chassis from sleep mode. ENERGY STAR qualified model only (The other models) As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency. ENG - 30 13 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com). 14 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair. ENG - 31 15 SPECIFICATIONS AND GUIDE Operating Temperature Range
+41F to +95F (+5C to +35C) Operating Humidity Range 10 % ~ 75 %
(DTS 2.0 sound is played in DTS format.)
(supporting Dolby Digital), DTS HW-A450 5V/0.5A 3.3 lbs (1.5 kg) 33.9 x 2.1 x 2.9 inches
(860.0 x 54.0 x 74.0 mm) 40W x 2, 6 ohm LPCM 2ch, Dolby Audio PS-WA45T 9.5 lbs (4.3 kg) 7.2 x 13.5 x 10.7 inches
(181.5 x 343.0 x 272.0 mm) 220W Specifications Model Name USB Weight Dimensions (W x H x D) AMPLIFIER Rated Output power Supported play formats Subwoofer Name Weight Dimensions (W x H x D) AMPLIFIER Peak Output power NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. ENG - 32 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
http://www.samsung.com/us/peaceofmind/authorized_resellers.html. Certi cation model only QUESTIONS OR COMMENTS?
Country Samsung Service Center Web Site Address IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridge eld Park, NJ 07660 2021 Samsung Electronics Co., Ltd. All rights reserved.
1 | User Manual -3 | Users Manual | 2.39 MiB | December 22 2020 / June 20 2021 | delayed release |
72-ZAA450-MANB3-SS SAFETY INFORMATION The following also applies to the Wireless Subwoofer
(PS-WA45T). SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product. USER MANUAL HW-A450 You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website. (http://www.samsung.com/support) QUESTIONS OR COMMENTS?
Country Samsung Service Center Web Site Address IN THE US www.samsung.com/us/support 1-800-SAMSUNG
(726-7864) Samsung Electronics America, Inc. 85 Challenger Road Ridge eld Park, NJ 07660 2021 Samsung Electronics Co., Ltd. All rights reserved. FCC Compliance Statement :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution :
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. Class B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. Connecting the equipment to an outlet that is on a different circuit than the radio or TV. Consulting the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). AC voltage : Rated voltage marked with this symbol is AC voltage. DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use : This symbol instructs the user to consult the user manual for further safety related information. WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CAUTION Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. 01 CHECKING THE COMPONENTS 03 CONNECTING THE SOUNDBAR Soundbar Main Unit / Subwoofer / Remote Control (AH81-
13358A) / Batteries / Power Cord X 2 (Subwoofer, Soundbar)
(AH81-11680A) / Optical Cable (AH81-11681A) NOTES For more information about the power supply and power consumption, refer to the label attached to the product. (Label:
Bottom of the Soundbar Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. Design and specifications are subject to change without prior notice. 02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Connecting the power and units For more information about the required electrical power and power consumption, refer to the label attached to the product.
(Label: Bottom of the Soundbar Main Unit) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) POWER USB (5V 0.5A) POWER DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) POWER POWER Rear of Subwoofer Bottom of the Soundbar Main Unit Manually connecting the Subwoofer Power
Source Volume
Position the product so that the SAMSUNG logo is located on the top.
Display Press the changed appears on the display. (D.IN / BT / USB)
(Source) button and the mode to be
Subwoofer
Red and Blue is On 5 Sec Blinking blue fast
Remote Control 5 Sec First, press the button on the remote control to turn on the display, and then press the Up button on the remote control for at least 5 seconds.
Soundbar SOUNDBAR SOUNDBAR ID SET NOTES If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption. The maximum transmission distance of the main units wireless signal is about 32.8 ft (10 m), but may vary depending on your operating environment. Bottom Panel of the Soundbar
DIGITAL AUDIO IN
(OPTICAL) DIGITAL AUDIO IN
(OPTICAL) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) USB (5V 0.5A) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) USB (5V 0.5A) DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) POWER POWER POWER
DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.
USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar.
POWER Connect the Soundbar's AC power cable.
POWER POWER POWER
Connection complete The LINK LED indicator stops blinking and glows a solid blue (connection complete). PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. 3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat
(e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. CALIFORNIA USA ONLY (Applicable for networking models only.) This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA Perchloate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:
www.samsung.com/recycling Or call, 1800SAMSUNG WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov. Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 04 CONNECTING WITH A 06 TROUBLESHOOTING HDMI OUT CABLE HDMI HDMI IN
(ARC) HDMI
(ARC) Optical Cable Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG
(1-800-726-7864). DIGITAL AUDIO IN
(OPTICAL) Bottom of the USB (5V 0.5A) Soundbar D.IN mode OPTICAL OUT OPTICAL TV / BD / DVD player / Set-top box / Game console The unit will not turn on. Is the power cord firmly plugged into the wall outlet?
Unplug and reconnect the power cord to the wall outlet to make sure the connection is secure. POWER A function does not work when the button is pressed. Is there static electricity in the air?
Disconnect the power plug and connect it again. DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) POWER Sound dropouts occur in BT mode. Please refer to the FULL MANUAL for more information. NOTE When you use an optical cable and the terminals have covers, be sure to remove the covers. 05 CONNECTING WIRELESSLY Connecting a TV or Bluetooth Device via Bluetooth Top of the Soundbar 5 Sec BT PAIRING OR A I R P OR What is the difference between BT READY and BT O S N O U M D D E PAIRING?
BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the or press and hold the Soundbar for more than 5 seconds while the Soundbar is in BT mode.) PAIR button on the remote control
(Source) button on the top of the NOTE If asked for a PIN code when connecting a Bluetooth device, enter <0000>. Sound is not produced. Is the Mute function on?
Press the Is the volume set to minimum?
Adjust the Volume.
(Mute) button to cancel the mute function. The remote control does not work. Are the batteries drained?
Replace with new batteries. Is the distance between the remote control and Soundbar main unit too far?
Move the remote control closer to the Soundbar main unit. The red LED on the subwoofer blinks and the subwoofer is not producing sound. This issue can occur if the subwoofer is not connected to the Soundbar main unit. Try to connect your subwoofer again. The subwoofer drones and vibrates noticeably. Try to adjust the vibration of your subwoofer. Push the WOOFER button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. 07 LICENSE Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. 08 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair. 09 SPECIFICATIONS AND GUIDE Specifications Model Name HW-A450 Weight 3.3 lbs (1.5 kg) USB 5V/0.5A Dimensions (W x H x D) 33.9 x 2.1 x 2.9 inches
(860.0 x 54.0 x 74.0 mm) Operating Temperature Range
+41F to +95F (+5C to +35C) Operating Humidity Range 10 % ~ 75 %
AMPLIFIER Rated Output power 40W x 2, 6 ohm Supported play formats
(DTS 2.0 sound is played in DTS format.) LPCM 2ch, Dolby Audio (supporting Dolby Digital), DTS Subwoofer Name PS-WA45T Weight 9.5 lbs (4.3 kg) AMPLIFIER Peak Output power 220W Dimensions (W x H x D) 7.2 x 13.5 x 10.7 inches
(181.5 x 343.0 x 272.0 mm) NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
[ENERGY STAR]
ENERGY STAR qualified model only Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program. ENERGY STAR qualified model only
(Applicable to Thin Client models only) As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR Program has been to reduced greenhouse gas emissions and save energy through voluntary labeling. Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours. The product can wake with a button press on the chassis from sleep mode. ENERGY STAR qualified model only (The other models) As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency. To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource. samsung.com) LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specifi ed above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior fi nish; accidents, abuse, neglect, fi re, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fl uctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefi ts of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
http://www.samsung.com/us/peaceofmind/authorized_resellers.html.
1 | External Photos | External Photos | 660.59 KiB | December 22 2020 / June 20 2021 | delayed release |
1 | Label and Label Location | ID Label/Location Info | 1.45 MiB | December 22 2020 / December 23 2020 |
MODEL / MODELE NO.: HW-A450 MODEL CODE: HW-A450/ZA AC110-120V~ 50/60Hz 25W MFD./FABRIQUE: OCTOBER 2020 S/N: 4LZ814PNB00001M FCC ID: A3LHWA450 Contains Tx FCC ID: A3LWSM520V MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ)
1 | Authorization Letter | Cover Letter(s) | 116.23 KiB | December 22 2020 / December 23 2020 |
Samsung Electronics Co Ltd Date: 11/23/2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) f) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
use certification only to indicate the products are certified as being in conformity with specified standards;
g) h) i) j) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by :
Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058
1 | Confidentiality Request Letter -1 | Cover Letter(s) | 74.95 KiB | December 22 2020 / December 23 2020 |
Samsung Electronics Co Ltd A3LHWA450 Request for Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:
FCC ID:
To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Date: 11/23/2020
1 | Confidentiality Request Letter -2 | Cover Letter(s) | 21.87 KiB | December 22 2020 / December 23 2020 |
Samsung Electronics Co Ltd DATE : 11/23/2020 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Request for Short-Term Confidentiality Company name:
FCC ID: A3LHWA450 FCC Part 15 Certification Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:
(1) Test Setup Photos
(2) External Photos
(3) Internal Photos
(4) User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Sincerely, Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Date: 11/23/2020
1 | Declaration Letter | Cover Letter(s) | 76.97 KiB | December 22 2020 / December 23 2020 |
Samsung Electronics Co Ltd Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Confirmation Letter We, Samsung Electronics Co Ltd The product: SoundBar And model No.: HW-A450 FCC ID: A3LHWA450 HW-A460,HW-A430,HW-A440,HW-A40M,HW-A47M,HW-A470,HW-A450***, HW-A450/**,HW-A460***,HW-A460/**,HW-A430***,HW-A430/**,HW-A440***, HW-A440/**,HW-T40M***, HW-T40M/**,HW-T47M***,HW-T47M/**, HW-A470***, HW-A470/** ("*" represents any alphanumeric character or blank) have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with HW-A450. The difference lies only model number and marketing purpose. ______________________ Contact personJenni Chun Date11/23/2020
1 | Test Report -1 | Cover Letter(s) | 5.43 MiB | December 25 2020 / December 23 2020 |
CFR 47 FCC PART 15 SUBPART C CERTIFICATION TEST REPORT For SoundBar MODEL NUMBER: HW-A450, HW-A460, HW-A430, HW-A440, HW-A40M, HW-A47M, HW-A470, HW-A450***, HW-A450/**, HW-A460***, HW-A460/**, HW-A430***, HW-A430/**, HW-A440***, HW-A440/**, HW-A40M***, HW-A40M/**, HW-A47M***, HW-A47M/**, HW-A470***, HW-A470/**
FCC ID: A3LHWA450 REPORT NUMBER: 4789711459-17 ISSUE DATE: November 30, 2020 Prepared for Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi-
Tech Development Zone Dongguan, 523808, Peoples Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com The results reported herein have been performed in accordance with the laboratorys terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. REPORT NO.: 4789711459-17 Page 2 of 95 Rev. V0 Issue Date 11/30/2020 Revisions Initial Issue Revision History Revised By UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 3 of 95 Summary of Test Results Clause Test Items FCC Rules Test Results 20dB Bandwidth and 99% Occupied Bandwidth FCC 15.247 (a) (1) Pass Conducted Output Power FCC 15.247 (b) (1) Pass Carrier Hopping Channel Separation FCC 15.247 (a) (1) Number of Hopping Frequency 15.247 (a) (1) III Time of Occupancy (Dwell Time) 15.247 (a) (1) III Conducted Bandedge FCC 15.247 (d) Pass Radiated Bandedge and Spurious Conducted Emission Test for AC Power Port Antenna Requirement FCC 15.247 (d) FCC 15.209 FCC 15.205 FCC 15.207 FCC 15.203 Note:
1.This test report is only published to and used by the applicant, and it is not for evidence purpose in China. 2. The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C >when <Accuracy Method> decision rule is applied. Pass Pass Pass Pass Pass Pass 1 2 3 4 5 6 7 8 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 4 of 95 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 6 2. TEST METHODOLOGY ..................................................................................................... 7 3. FACILITIES AND ACCREDITATION ................................................................................. 7 4. CALIBRATION AND UNCERTAINTY ................................................................................ 8 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................... 8 5. EQUIPMENT UNDER TEST ............................................................................................... 9 5.1. DESCRIPTION OF EUT .............................................................................................. 9 5.2. MAXIMUM PEAK OUTPUT POWER ........................................................................... 9 5.3. PACKET TYPE CONFIGURATION ............................................................................10 5.4. CHANNEL LIST ..........................................................................................................11 5.5. TEST CHANNEL CONFIGURATION ..........................................................................11 5.6. WORST-CASE CONFIGURATIONS...........................................................................11 5.7. THE WORSE CASE POWER SETTING PARAMETER ..............................................12 5.8. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................12 5.9. DESCRIPTION OF TEST SETUP ...............................................................................13 6. MEASURING INSTRUMENT AND SOFTWARE USED ....................................................14 7. ANTENNA PORT TEST RESULTS ...................................................................................16 7.1. ON TIME AND DUTY CYCLE .....................................................................................16 7.2. 20 dB BANDWIDTH AND 99 % OCCUPIED BANDWIDTH ........................................17 7.3. CONDUCTED OUTPUT POWER ...............................................................................19 7.4. CARRIER FREQUENCY SEPARATION .....................................................................20 7.5. NUMBER OF HOPPING FREQUENCIES ..................................................................22 7.6. TIME OF OCCUPANCY (DWELL TIME) .....................................................................24 7.7. CONDUCTED BANDEDGE AND SPURIOUS EMISSION ..........................................26 8. RADIATED TEST RESULTS .............................................................................................28 8.1. RESTRICTED BANDEDGE ........................................................................................34 8.1.1. GFSK MODE .......................................................................................................34 8DPSK MODE .....................................................................................................37 8.1.2. 8.2. SPURIOUS EMISSIONS (1 GHz ~ 3 GHz) .................................................................40 8DPSK MODE .....................................................................................................40 8.2.1. 8.3. SPURIOUS EMISSIONS (3 GHz ~ 18 GHz) ...............................................................42 8.3.1. GFSK MODE .......................................................................................................42 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 5 of 95 8.3.2. 8DPSK MODE .....................................................................................................48 8.4. SPURIOUS EMISSIONS (18 GHz ~ 26 GHz) .............................................................54 8.4.1. GFSK MODE .......................................................................................................54 8.5. SPURIOUS EMISSIONS (30 MHz ~ 1 GHz) ...............................................................56 8.5.1. GFSK MODE .......................................................................................................56 8.6. SPURIOUS EMISSIONS BELOW 30 MHz .................................................................58 8.6.1. GFSK MODE .......................................................................................................58 8.7. WORST-CASE CO-LOCATION ..................................................................................61 9. AC POWER LINE CONDUCTED EMISSIONS ..................................................................65 9.1.1. GFSK MODE .......................................................................................................66 10. ANTENNA REQUIREMENTS ........................................................................................68 11. Appendix .......................................................................................................................69 11.1. Appendix A: 20dB Emission Bandwidth ...................................................................69 Test Result .......................................................................................................69 Test Graphs .....................................................................................................70 11.1.1. 11.1.2. 11.2. Appendix B: Occupied Channel Bandwidth .............................................................72 Test Result .......................................................................................................72 Test Graphs .....................................................................................................73 11.2.1. 11.2.2. 11.3. Appendix C: Maximum peak conducted output power .............................................75 Test Result .......................................................................................................75 11.3.1. 11.4. Appendix D: Carrier frequency separation ...............................................................76 Test Result .......................................................................................................76 Test Graphs .....................................................................................................77 11.4.1. 11.4.2. 11.5. Appendix E: Time of occupancy ..............................................................................78 Test Result .......................................................................................................78 Test Graphs .....................................................................................................79 11.5.1. 11.5.2. 11.6. Appendix F: Number of hopping channels ...............................................................81 Test Result .......................................................................................................81 Test Graphs .....................................................................................................82 11.6.1. 11.6.2. 11.7. Appendix G: Band edge measurements ..................................................................83 Test Result .......................................................................................................83 Test Graphs .....................................................................................................84 11.7.1. 11.7.2. 11.8. Appendix H: Conducted Spurious Emission ............................................................87 Test Result .......................................................................................................87 Test Graphs .....................................................................................................88 11.8.1. 11.8.2. 11.9. Appendix I: Duty Cycle ............................................................................................94 Test Result .......................................................................................................94 Test Graphs .....................................................................................................95 11.9.1. 11.9.2. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 6 of 95 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Samsung Electronics Co Ltd Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Manufacturer Information Company Name: Samsung Electronics Co Ltd Address: 19 Chapin Rd., Building D Pine Brook New Jersey United EUT Information EUT Name:
Model:
Serial Model:
Brand:
Sample Received Date:
Sample Status:
Sample ID:
Date of Tested:
States 07058 SoundBar HW-A450 Please refer to clause 5.1. Description of EUT SAMSUNG November 12,2020 Normal 3440010 November 12,2020~ November 30,2020 APPLICABLE STANDARDS STANDARD CFR 47 FCC PART 15 SUBPART C TEST RESULTS PASS Prepared By:
Check By:
Kebo Zhang Shawn Wen Project Engineer Laboratory Leader Approved By:
Stephen Guo Laboratory Manager UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 7 of 95 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with KDB 558074 D01 15.247 Meas Guidance v05r02, 414788 D01 Radiated Test Site v01r01, CFR 47 FCC Part 2, CFR 47 FCC Part 15, ANSI C63.10-2013. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Delcaration of Conformity (DoC) and Certification rules ISED (Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with ISED. The Company Number is 21320. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name:
Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note 1: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China Note 2: The test anechoic chamber in UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch had been calibrated and compared to the open field sites and the test anechoic chamber is shown to be equivalent to or worst case from the open field site. Note 3: For below 30 MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. And these measurements below 30 MHz had been correlated to measurements performed on an OFS. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 8 of 95 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations and is traceable to recognized national standards. 4.2. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus:
Test Item Conduction emission Radiated Emission
(Included Fundamental Emission) (9 kHz ~ 30 MHz) Radiated Emission
(Included Fundamental Emission) (30 MHz ~ 1 GHz) Uncertainty 3.62 dB 2.2 dB 4.00 dB Radiated Emission
(Included Fundamental Emission) (1 GHz to 26 GHz) 5.78 dB (1 GHz ~ 18 GHz) 5.23 dB (18 GHz ~ 26 GHz) Note: This uncertainty represents an expanded uncertainty expressed at approximately the 95
% confidence level using a coverage factor of k=2. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 9 of 95 5. EQUIPMENT UNDER TEST 5.1. DESCRIPTION OF EUT SoundBar EUT Name Model Series Model HW-A450 HW-A460, HW-A430, HW-A440, HW-A40M, HW-A47M, HW-A470, HW-A450***, HW-A450/**, HW-A460***, HW-A460/**, HW-A430***, HW-A430/**, HW-A440***, HW-A440/**, HW-
A40M***, HW-A40M/**, HW-A47M***, HW-A47M/**, HW-A470***, HW-A470/**
HW-A460, HW-A430, HW-A440, HW-A40M, HW-A47M, HW-A470, HW-A450***, HW-A450/**,HW-A460***, HW-A460/**, HW-A430***, HW-A430/**, HW-A440***, HW-A440/**,HW-A40M***, HW-
A40M/**, HW-A47M***, HW-A47M/**, HW-A470***, HW-A470/**
("*" represents any alphanumeric character or blank) have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with HW-A450. The difference lies only model number and marketing purpose. Bluetooth BR & EDR 2402 MHz ~ 2480 MHz Basic Rate Enhanced Data Rate GFSK DH5 1 Mbps
/4-DQPSK 8DPSK 2DH5 2 Mbps 3DH5 3M bps AC mains State AC 120V, 60Hz Model difference Technology Transmit Frequency Range Mode Modulation Packet Type
(Maximum Payload):
Data Rate Supply Voltage 5.2. MAXIMUM PEAK OUTPUT POWER Modulation GFSK 8DPSK Frequency
(MHz) 2402 ~ 2480 2402 ~ 2480 Channel Number 0-78[79]
0-78[79]
Maximum Peak Output Power (dBm) 4.31 2.61 Maximum EIRP
(dBm) 7.01 5.31 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 10 of 95 5.3. PACKET TYPE CONFIGURATION Packet Type DH1 DH3 DH5 2-DH1 2-DH3 2-DH5 3-DH1 3-DH3 3-DH5 Setting (Packet Length) 27 183 339 54 367 679 83 552 1021 Modulation GFSK
/4-DQPSK 8DPSK UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 11 of 95 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 5.4. CHANNEL LIST Channel Channel Channel Channel Frequency
(MHz) 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Frequency
(MHz) 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 Frequency
(MHz) 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
Frequency
(MHz) 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480
5.5. TEST CHANNEL CONFIGURATION Test Mode GFSK-DH5 8DPSK-3DH5 Test Channel Frequency CH 0(Low Channel), CH 39(MID Channel), CH 78(High Channel) CH 0(Low Channel), CH 39(MID Channel), CH 78(High Channel) Hop Hop 2402 MHz, 2441 MHz, 2480 MHz 2402 MHz, 2441 MHz, 2480 MHz 2402 MHz ~ 2480 MHz 2402 MHz ~ 2480 MHz GFSK-DH5 8DPSK-3DH5 Note: The hop is hopping mode. 5.6. WORST-CASE CONFIGURATIONS Bluetooth Mode Modulation Technology Modulation Type Data Rate Packet Type BR EDR FHSS FHSS GFSK 8DPSK 1Mbit/s 3Mbit/s DH5 3-DH5 Note: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates. Only GFSK and 8DPSK test data were report in this report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 12 of 95 5.7. THE WORSE CASE POWER SETTING PARAMETER The Worse Case Power Setting Parameter under 2400 ~ 2483.5 MHz Band Test Software Transmit Antenna Number Modulation GFSK 8DPSK Tera Term Test Software Setting Value 1 1 CH 00 63 63 CH 39 63 63 CH 78 63 63 5.8. DESCRIPTION OF AVAILABLE ANTENNAS Antenna Frequency (MHz) Antenna Type MAX Antenna Gain (dBi) 1 2402-2480 Flex PIFA antenna 2.7 Modulation GFSK 8DPSK Transmit and Receive Mode 1TX, 1RX 1TX, 1RX Description Antenna 1 can be used as transmitting/receiving antenna. Antenna 1 can be used as transmitting/receiving antenna. Note: 1. The value of the antenna gain was declared by customer. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 13 of 95 5.9. DESCRIPTION OF TEST SETUP SUPPORT EQUIPMENT Item Equipment Brand Name Model Name Remarks 1 2 3 4 Laptop UART DVD USB Disk ThinkPad
Pioneer Kingston X230i
32 GB HGKD001867CN
I/O CABLES Cable No 1 Port USB ACCESSORIES Connector Type Cable Type Cable Length(m) Remarks N/A N/A 1 N/A Item Accessory Brand Name Model Name Cable Length(m) 1 Optical Cable
1.5M Note: This cable is provided by the customer. TEST SETUP The EUT can work in engineering mode with a software through a Laptop. SETUP DIAGRAM FOR TESTS DVD EUT USB Disk Laptop UART UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 14 of 95 6. MEASURING INSTRUMENT AND SOFTWARE USED Used Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Two-Line V-
Network R&S R&S ESR3 101961 Dec.05,2019 Dec.05,2020 ENV216 101983 Dec.05,2019 Dec.05,2020 Used Description Manufacturer Name Version Test Software for Conducted disturbance Farad EZ-EMC Ver. UL-3A1 Conducted Emissions Instrument Software Radiated Emissions Instrument Used Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. MXE EMI Receiver KESIGHT N9038A MY56400036 Dec.06,2019 Dec.06,2020 Hybrid Log Periodic Antenna Preamplifier EMI Measurement Receiver Horn Antenna High Gain Horn Antenna TDK HLP-3003C 130960 Sep.17, 2018 Sep.17, 2021 HP R&S 8447D 2944A09099 Dec.05,2019 Dec.05,2020 ESR26 101377 Dec.05,2019 Dec.05,2020 TDK HRN-0118 130939 Sep.17, 2018 Sep.17, 2021 Schwarzbeck BBHA-9170 691 Aug.11, 2018 Aug.11, 2021 Preamplifier TDK PA-02-0118 Dec.05,2019 Dec.05,2020 Preamplifier TDK PA-02-2 Dec.05,2019 Dec.05,2020 Loop antenna Schwarzbeck Jan.07, 2019 Jan.07, 2022 Preamplifier TDK Dec.5, 2019 Dec.5, 2020 Band Reject Filter Wainwright 4 Dec.05,2019 Dec.05,2020 Band Reject Filter Wainwright Dec.05,2019 Dec.05,2020 High Pass Filter Wainwright Dec.05,2019 Dec.05,2020 TRS-305-
00066 TRS-307-
00003 00008 TRS-302-
00050 4 4 1519B PA-02-001-
3000 WRCJV8-
2350-2400-
2483.5-
2533.5-
40SS WRCJV12-
5695-5725-
5850-5880-
40SS WHKX10-
5850-6500-
1800-40SS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 15 of 95 Used Description Test Software for Radiated disturbance Manufacturer Name Version Farad EZ-EMC Ver. UL-3A1 Software Other instruments Used Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Spectrum Analyzer Keysight N9030A MY55410512 Dec.06,2019 Dec.06,2020 Spectrum Analyzer Keysight N9020A MY49100060 Dec.06,2019 Dec.06,2020 Power Meter Keysight N1911A MY55416024 Dec.06,2019 Dec.06,2020 Power Sensor Keysight U2021XA MY5100022 Dec.06,2019 Dec.06,2020 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 16 of 95 7. ANTENNA PORT TEST RESULTS 7.1. ON TIME AND DUTY CYCLE LIMITS None; for reporting purposes only. PROCEDURE Refer to ANSI C63.10-2013 Zero Span Spectrum Analyzer method. TEST SETUP EUT Attenuator Spectrum Analyser 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to appendix I. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 17 of 95 7.2. 20 dB BANDWIDTH AND 99 % OCCUPIED BANDWIDTH LIMITS Detector RBW VBW Span Trace CFR 47FCC Part15 (15.247) Subpart C Section Test Item Limit Frequency Range
(MHz) CFR 47 FCC 15.247 (a) (1) 20 dB Bandwidth None; for reporting purposes only. 2400-2483.5 ISED RSS-Gen Clause 6.7 99 % Occupied Bandwidth None; for reporting purposes only. 2400-2483.5 TEST PROCEDURE Refer to ANSI C63.10-2013 clause 6.9.2. Connect the EUT to the spectrum analyser and use the following settings:
Center Frequency The center frequency of the channel under test Peak For 20 dB Bandwidth: 1 % to 5 % of the 20 dB bandwidth For 99 % Occupied Bandwidth: 1 % to 5 % of the occupied bandwidth For 20 dB Bandwidth: approximately 3RBW For 99 % Occupied Bandwidth: 3RBW Approximately 2 to 3 times the 20dB bandwidth Max hold Auto couple Sweep a) Use the occupied bandwidth function of the instrument, allow the trace to stabilize and report the measured 99 % occupied bandwidth and 20 dB Bandwidth. TEST SETUP EUT Attenuator Spectrum Analyzer UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 18 of 95 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to appendix A and B. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. LIMITS REPORT NO.: 4789711459-17 Page 19 of 95 7.3. CONDUCTED OUTPUT POWER CFR 47 FCC Part15 (15.247), Subpart C Section Test Item Limit CFR 47 FCC 15.247 (b) (1) Peak Conducted Output Power Frequency Range
(MHz) 2400-2483.5 Hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel: 1 watt or 30 dBm;
Hopping channel carrier frequencies that are separated by 25 kHz or two-
thirds of the 20 dB bandwidth of the hopping channel: 125 mW or 21 dBm TEST PROCEDURE Connect the EUT to a low loss RF cable from the antenna port to the power sensor (video bandwidth is greater than the occupied bandwidth). Measure peak emission level, the indicated level is the peak output power, after any corrections for external attenuators and cables. TEST SETUP EUT Power Sensor Power Meter 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to appendix C. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 20 of 95 7.4. CARRIER FREQUENCY SEPARATION LIMITS Section Test Item Limit Frequency Range
(MHz) CFR 47 FCC Part15 (15.247), Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel. CFR 47 FCC 15.247 (a) (1)) Carrier Frequency Separation 2400-2483.5 TEST PROCEDURE Refer to ANSI C63.10-2013 clause 7.8.2. Connect the EUT to the spectrum analyzer and use the following settings:
Center Frequency The center frequency of the channel under test Span Detector RBW VBW Trace wide enough to capture the peaks of two adjacent channels Peak Start with the RBW set to approximately 30 % of the channel spacing;
adjust as necessary to best identify the center of each individual channel. RBW Max hold Auto couple Sweep time Allow the trace to stabilize and use the marker-delta function to determine the separation between the peaks of the adjacent channels. Compliance of an EUT with the appropriate regulatory limit shall be determined. TEST SETUP EUT Attenuator Spectrum Analyzer UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 21 of 95 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to Appendix D. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 22 of 95 7.5. NUMBER OF HOPPING FREQUENCIES LIMITS Detector RBW VBW Span Trace CFR 47 FCC Part15 (15.247), Subpart C Section Test Item Limit CFR 47 15.247 (a) (1) III Number of Hopping Frequency at least 15 hopping channels TEST PROCEDURE Refer to ANSI C63.10-2013 clause 7.8.3. Connect the EUT to the spectrum Analyzer and use the following settings:
Peak To identify clearly the individual channels, set the RBW to less than 30% of the channel spacing or the 20 dB bandwidth, whichever is smaller. RBW The frequency band of operation. Depending on the number of channels the device supports, it may be necessary to divide the frequency range of operation across multiple spans, to allow the individual channels to be clearly seen. Max hold Auto couple Sweep time Set EUT to transmit maximum output power and switch on frequency hopping function. then set enough count time (larger than 5000 times) to get all the hopping frequency channel displayed on the screen of spectrum analyzer, count the quantity of peaks to get the number of hopping channels. EUT TEST SETUP Attenuator Spectrum Analyzer UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 23 of 95 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to appendix F. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. LIMITS REPORT NO.: 4789711459-17 Page 24 of 95 7.6. TIME OF OCCUPANCY (DWELL TIME) CFR 47 FCC Part15 (15.247), Subpart C Section Test Item CFR 47 15.247 (a) (1) III Time of Occupancy
(Dwell Time) Limit The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds, multiplied by the number of hopping channels employed. TEST PROCEDURE Refer to ANSI C63.10-2013 clause 7.8.4. Connect the EUT to the spectrum Analyzer and use the following settings:
Center Frequency The center frequency of the channel under test Peak 1 MHz RBW Detector RBW VBW Span Trace Sweep time Zero span, centered on a hopping channel Max hold As necessary to capture the entire dwell time per hopping channel; where possible use a video trigger and trigger delay so that the transmitted signal starts a little to the right of the start of the plot. The trigger level might need slight adjustment to prevent triggering when the system hops on an adjacent channel Use the marker-delta function to determine the transmit time per hop (Burst Width). If this value varies with different modes of operation (data rate, modulation format, number of hopping channels, etc.), then repeat this test for each variation in transmit time. For FHSS Mode (79 Channel):
DH1/3DH1 Dwell Time: Burst Width * (1600/2) * 31.6 / (channel number) DH3/3DH3 Dwell Time: Burst Width * (1600/4) * 31.6 / (channel number) DH5/3DH5 Dwell Time: Burst Width * (1600/6) * 31.6 / (channel number) For AFHSS Mode (20 Channel):
DH1/3DH1 Dwell Time: Burst Width * (800/2) * 8 / (channel number) DH3/3DH3 Dwell Time: Burst Width * (800/4) * 8 / (channel number) DH5/3DH5 Dwell Time: Burst Width * (800/6) * 8 / (channel number) UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 25 of 95 TEST SETUP EUT Attenuator Spectrum Analyzer 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to appendix E. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. LIMITS Detector RBW VBW Span Trace Span Detector RBW VBW REPORT NO.: 4789711459-17 Page 26 of 95 7.7. CONDUCTED BANDEDGE AND SPURIOUS EMISSION CFR 47 FCC Part15 (15.247), Subpart C Section CFR 47 FCC 15.247 (d) Test Item Conducted Spurious Emission Limit at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power TEST PROCEDURE Refer to ANSI C63.10-2013 clause 7.8.6 and 7.8.8. Connect the EUT to the spectrum analyser and use the following settings for reference level measurement:
Center Frequency The center frequency of the channel under test Peak 100 kHz 3 RBW 1.5 x DTS bandwidth Max hold Auto couple. Sweep time Allow trace to fully stabilize and use the peak marker function to determine the maximum PSD level. Change the settings for emission level measurement:
Set the center frequency and span to encompass frequency range to be measured Peak 100 kHz 3 RBW measurement points span/RBW Trace Max hold Auto couple. Sweep time Allow trace to fully stabilize and use the peak marker function to determine the maximum PSD level. Ensure that the amplitude of all unwanted emissions outside of the authorized frequency band (excluding restricted frequency bands) is attenuated by at least the minimum requirements. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 27 of 95 TEST SETUP EUT Attenuator Spectrum Analyzer 26.2 C 101 kPa Relative Humidity Test Voltage 60.9 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS Please refer to appendix G & H. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 28 of 95 8. RADIATED TEST RESULTS LIMITS Please refer to CFR 47 FCC 15.205 and 15.209. Radiation Disturbance Test Limit for FCC (Class B) (9 kHz-1 GHz) Emissions radiated outside of the specified frequency bands above 30 MHz Frequency Range
(MHz) Field Strength Limit
(uV/m) at 3 m 30 - 88 88 - 216 216 - 960 Above 960 Above 1000 100 150 200 500 500 FCC Emissions radiated outside of the specified frequency bands below 30 MHz Frequency (MHz) Field strength (microvolts/meter) Measurement distance (meters) 0.009-0.490 0.490-1.705 1.705-30.0 2400/F(kHz) 24000/F(kHz) 30 Field Strength Limit
(dBuV/m) at 3 m Quasi-Peak 40 Peak 74 Average 54 43.5 46 54 300 30 30 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 29 of 95 FCC Restricted bands of operation refer to FCC 15.205 (a):
Note: 1Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2Above 38.6c TEST SETUP AND PROCEDURE Below 30 MHz 200 Hz (From 9 kHz to 0.15 MHz)/ 9 kHz (From 0.15 MHz to 30 MHz) 200 Hz (From 9 kHz to 0.15 MHz)/ 9 kHz (From 0.15 MHz to 30 MHz) The setting of the spectrum analyser RBW VBW Sweep Trace Auto Max hold 1. The testing follows the guidelines in ANSI C63.10-2013 clause 6.4. 2. The EUT was arranged to its worst case and then turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are used for the test in order to get better signal level. Both Horizontal, Face-on and Face-off polarizations of the antenna are set to make the measurement. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 30 of 95 3. The EUT was placed on a turntable with 80 cm above ground. 4. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a 1 m height antenna tower. 5. The radiated emission limits are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. 6. For measurement below 1 GHz, the initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak and average detector mode re-
measured. If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, the emission measurement will be repeated using the quasi-peak and average detector and reported. 7. Although these tests were performed other than open field site, adequate comparison measurements were confirmed against 30m open field site. Therefore sufficient tests were made to demonstrate that the alternative site produces results that correlate with the ones of tests made in an open field site based on KDB 414788. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 31 of 95 Below 1 GHz and above 30 MHz The setting of the spectrum analyser RBW VBW Sweep Detector Trace 120 kHz 300 kHz Auto Peak/QP Max hold 1. The testing follows the guidelines in ANSI C63.10-2013 clause 6.5. 2. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are used for the test in order to get better signal level. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 3. The EUT was placed on a turntable with 80 cm above ground. 4. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. 5. For measurement below 1 GHz, the initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, the emission measurement will be repeated using the quasi-peak detector and reported. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 32 of 95 Above 1 GHz The setting of the spectrum analyser RBW VBW Sweep Detector Trace 1 MHz PEAK: 3 MHz AVG: see note 6 Auto Peak Max hold 1. The testing follows the guidelines in ANSI C63.10-2013 clause 6.6. 2. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are used for the test in order to get better signal level. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 3. The EUT was placed on a turntable with 1.5 m above ground. 4. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. 5. For measurement above 1 GHz, the emission measurement will be measured by the peak detector. This peak level, once corrected, must comply with the limit specified in Section 15.209. 6. For measurements above 1 GHz the resolution bandwidth is set to 1 MHz, then the video bandwidth is set to 3 MHz for peak measurements and 1 MHz resolution bandwidth with 1/T video bandwidth with peak detector for average measurements. For the Duty Cycle please refer to clause 7.1.ON TIME AND DUTY CYCLE. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 33 of 95 X axis, Y axis, Z axis positions :
Note 1: For all radiated test, EUT in each of three orthogonal axis emissions had been tested, but only the worst case (X axis) data recorded in the report. Note 2: Simultaneous transmission had been evaluated with the wireless 5.8GHz and BT transmitter and there were not any additional or worse emissions found. Only the worst data was recorded in the test report. Note 3: The EUT was fully exercised with external accessories during the test. In the case of multiple accessory external ports, an external accessory shall be connected to one of each type of port. 25.2 C 101 kPa Relative Humidity Test Voltage 48.7 %
AC 120V, 60Hz TEST ENVIRONMENT Temperature Atmosphere Pressure RESULTS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 34 of 95 8.1. RESTRICTED BANDEDGE 8.1.1. GFSK MODE RESTRICTED BANDEDGE (LOW CHANNEL, VERTICAL) No. 1 2 Frequency
(MHz) 2376.240 2390.000 Reading
(dBuV) 37.24 35.71 Correct
(dB/m) 11.87 11.96 Result
(dBuV/m) 49.11 47.67 Limit
(dBuV/m) 74.00 74.00 Margin
(dB)
-24.89
-26.33 Remark peak peak Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Only the worst data was recorded, if it complies with the limit, the other emissions deemed to comply with the limit. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 35 of 95 RESTRICTED BANDEDGE (HIGH CHANNEL, VERTICAL) PEAK No. 1 2 3 Frequency
(MHz) 2483.500 2483.550 2483.700 Reading
(dBuV) 45.25 45.26 46.44 Correct
(dB/m) 12.38 12.38 12.38 Result
(dBuV/m) 57.63 57.64 58.82 Limit
(dBuV/m) 74.00 74.00 74.00 Margin
(dB)
-16.37
-16.36
-15.18 Remark peak peak peak Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Only the worst data was recorded, if it complies with the limit, the other emissions deemed to comply with the limit. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 36 of 95 AVG No. 1 2 3 Frequency
(MHz) 2483.500 2483.550 2483.700 Reading
(dBuV) 23.75 25.63 23.79 Correct
(dB/m) 12.38 12.38 12.38 Result
(dBuV/m) 36.13 38.01 36.17 Limit
(dBuV/m) 54.00 54.00 54.00 Margin
(dB)
-17.87
-15.99
-17.83 Remark AVG AVG AVG Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Only the worst data was recorded, if it complies with the limit, the other emissions deemed to comply with the limit. Note: Both horizontal and vertical had been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 37 of 95 8.1.2. 8DPSK MODE RESTRICTED BANDEDGE (LOW CHANNEL, VERTICAL) No. 1 2 Frequency
(MHz) 2375.435 2390.000 Reading
(dBuV) 37.17 34.19 Correct
(dB/m) 11.86 11.96 Result
(dBuV/m) 49.03 46.15 Limit
(dBuV/m) 74.00 74.00 Margin
(dB)
-24.97
-27.85 Remark peak peak Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Only the worst data was recorded, if it complies with the limit, the other emissions deemed to comply with the limit. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 38 of 95 RESTRICTED BANDEDGE (HIGH CHANNEL, VERTICAL) PEAK No. 1 2 3 Frequency
(MHz) 2483.500 2483.525 2483.825 Reading
(dBuV) 45.09 46.31 44.32 Correct
(dB/m) 12.38 12.38 12.38 Result
(dBuV/m) 57.47 58.69 56.70 Limit
(dBuV/m) 74.00 74.00 74.00 Margin
(dB)
-16.53
-15.31
-17.30 Remark peak peak peak Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Only the worst data was recorded, if it complies with the limit, the other emissions deemed to comply with the limit. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 39 of 95 AVG No. 1 2 3 Frequency
(MHz) 2483.500 2483.525 2483.825 Reading
(dBuV) 25.71 25.53 26.08 Correct
(dB/m) 12.38 12.38 12.38 Result
(dBuV/m) 38.09 37.91 38.46 Limit
(dBuV/m) 54.00 54.00 54.00 Margin
(dB)
-15.91
-16.09
-15.54 Remark AVG AVG AVG Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Only the worst data was recorded, if it complies with the limit, the other emissions deemed to comply with the limit. Note: Both horizontal and vertical had been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 40 of 95 8.2. SPURIOUS EMISSIONS (1 GHz ~ 3 GHz) 8.2.1. 8DPSK MODE HARMONICS AND SPURIOUS EMISSIONS (HIGH CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 1834.000 2116.000 2284.000 2480.000 2584.000 2828.000 Reading
(dBuV) 34.79 34.98 34.81 83.76 37.96 35.95 Correct
(dB/m) 9.85 11.08 11.32 12.35 12.41 13.84 Result
(dBuV/m) 44.64 46.06 46.13 96.11 50.37 49.79 Limit
(dBuV/m) 74.00 74.00 74.00
74.00 74.00 Margin
(dB)
-29.36
-27.94
-27.87
-23.63
-24.21 Remark peak peak peak fundamental peak peak Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 41 of 95 HARMONICS AND SPURIOUS EMISSIONS (HIGH CHANNEL, VERTICAL) No. 1 2 3 4 5 6 Frequency
(MHz) 1414.000 2184.000 2286.000 2480.000 2584.000 2636.000 Reading
(dBuV) 36.67 34.04 34.84 88.29 39.16 38.63 Correct
(dB/m) 6.74 11.27 11.32 12.35 12.41 12.62 Result
(dBuV/m) 43.41 45.31 46.16 100.64 51.57 51.25 Limit
(dBuV/m) 74.00 74.00 74.00
74.00 74.00 Margin
(dB)
-30.59
-28.69
-27.84
-22.43
-22.75 Remark peak peak peak fundamental peak peak Note: 1. Measurement = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. Note: All the modes and channels have been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 42 of 95 8.3. SPURIOUS EMISSIONS (3 GHz ~ 18 GHz) 8.3.1. GFSK MODE HARMONICS AND SPURIOUS EMISSIONS (LOW CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4800.000 8160.000 11820.000 14220.000 16980.000 17925.000 Reading
(dBuV) 47.94 38.72 35.92 33.94 32.33 29.27 Correct
(dB/m) 0.46 8.18 13.19 16.34 20.31 23.37 Result
(dBuV/m) 48.40 46.90 49.11 50.28 52.64 52.64 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-25.60
-27.10
-24.89
-23.72
-21.36
-21.36 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 43 of 95 HARMONICS AND SPURIOUS EMISSIONS (LOW CHANNEL, VERTICAL) No. 1 2 3 4 5 6 7 Frequency
(MHz) 4260.000 4800.000 4800.000 10410.000 11625.000 13920.000 16920.000 Reading
(dBuV) 51.03 56.51 45.15 37.58 36.55 34.99 32.71 Correct
(dB/m)
-1.71 0.46 0.46 11.02 13.12 16.17 20.06 Result
(dBuV/m) 49.32 56.97 45.61 48.60 49.67 51.16 52.77 Limit
(dBuV/m) 74.00 74.00 54.00 74.00 74.00 74.00 74.00 Margin
(dB)
-24.68
-17.03
-8.39
-25.40
-24.33
-22.84
-21.23 Remark peak peak AVG peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 44 of 95 HARMONICS AND SPURIOUS EMISSIONS (MID CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4875.000 7710.000 11295.000 12765.000 13920.000 17340.000 Reading
(dBuV) 43.77 40.12 36.28 34.64 34.35 30.96 Correct
(dB/m) 0.76 6.64 12.34 15.18 16.17 21.61 Result
(dBuV/m) 44.53 46.76 48.62 49.82 50.52 52.57 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-29.47
-27.24
-25.38
-24.18
-23.48
-21.43 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 45 of 95 HARMONICS AND SPURIOUS EMISSIONS (MID CHANNEL, VERTICAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4875.000 6015.000 11100.000 12810.000 13920.000 16845.000 Reading
(dBuV) 53.19 45.34 36.94 34.95 34.46 32.61 Correct
(dB/m) 0.76 3.31 12.56 15.59 16.17 19.96 Result
(dBuV/m) 53.95 48.65 49.50 50.54 50.63 52.57 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-20.05
-25.35
-24.50
-23.46
-23.37
-21.43 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 46 of 95 HARMONICS AND SPURIOUS EMISSIONS (HIGH CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4950.000 8115.000 11505.000 13920.000 16200.000 17430.000 Reading
(dBuV) 46.31 38.12 36.21 34.63 33.39 31.51 Correct
(dB/m) 1.13 7.90 13.42 16.17 18.50 21.38 Result
(dBuV/m) 47.44 46.02 49.63 50.80 51.89 52.89 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-26.56
-27.98
-24.37
-23.20
-22.11
-21.11 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 47 of 95 HARMONICS AND SPURIOUS EMISSIONS (HIGH CHANNEL, VERTICAL) No. 1 2 3 4 5 6 7 Frequency
(MHz) 4950.000 4950.000 6015.000 7845.000 13320.000 13920.000 17055.000 Reading
(dBuV) 53.61 40.41 44.95 38.85 34.36 35.07 32.39 Correct
(dB/m) 1.13 1.13 3.31 7.62 15.74 16.17 20.53 Result
(dBuV/m) 54.74 41.54 48.26 46.47 50.10 51.24 52.92 Limit
(dBuV/m) 74.00 54.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-19.26
-12.46
-25.74
-27.53
-23.90
-22.76
-21.08 Remark peak AVG peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 48 of 95 8.3.2. 8DPSK MODE HARMONICS AND SPURIOUS EMISSIONS (LOW CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4800.000 10260.000 11790.000 15630.000 17130.000 17850.000 Reading
(dBuV) 48.55 38.38 35.99 33.49 31.62 29.70 Correct
(dB/m) 0.46 10.71 13.17 16.89 20.72 23.32 Result
(dBuV/m) 49.01 49.09 49.16 50.38 52.34 53.02 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-24.99
-24.91
-24.84
-23.62
-21.66
-20.98 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 49 of 95 HARMONICS AND SPURIOUS EMISSIONS (LOW CHANNEL, VERTICAL) No. 1 2 3 4 5 6 7 Frequency
(MHz) 4800.000 4800.000 7755.000 10320.000 13065.000 13800.000 17145.000 Reading
(dBuV) 56.11 43.67 39.45 36.93 34.56 33.56 32.00 Correct
(dB/m) 0.46 0.46 7.29 11.05 15.11 17.10 20.77 Result
(dBuV/m) 56.57 44.13 46.74 47.98 49.67 50.66 52.77 Limit
(dBuV/m) 74.00 54.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-17.43
-9.87
-27.26
-26.02
-24.33
-23.34
-21.23 Remark peak AVG peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 50 of 95 HARMONICS AND SPURIOUS EMISSIONS (MID CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4875.000 7845.000 9135.000 11505.000 13920.000 17130.000 Reading
(dBuV) 46.62 39.22 38.06 36.87 34.60 32.01 Correct
(dB/m) 0.76 7.62 9.07 13.42 16.17 20.72 Result
(dBuV/m) 47.38 46.84 47.13 50.29 50.77 52.73 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-26.62
-27.16
-26.87
-23.71
-23.23
-21.27 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 51 of 95 HARMONICS AND SPURIOUS EMISSIONS (MID CHANNEL, VERTICAL) No. 1 2 3 4 5 6 7 Frequency
(MHz) 4875.000 4875.000 6015.000 8145.000 11700.000 13920.000 17235.000 Reading
(dBuV) 55.97 43.35 45.04 39.47 36.63 34.28 31.29 Correct
(dB/m) 0.76 0.76 3.31 8.08 12.95 16.17 21.21 Result
(dBuV/m) 56.73 44.11 48.35 47.55 49.58 50.45 52.50 Limit
(dBuV/m) 74.00 54.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-17.27
-9.89
-25.65
-26.45
-24.42
-23.55
-21.50 Remark peak AVG peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 52 of 95 HARMONICS AND SPURIOUS EMISSIONS (HIGH CHANNEL, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 4950.000 7770.000 10470.000 11790.000 13800.000 16815.000 Reading
(dBuV) 48.40 39.66 37.66 36.36 33.45 33.30 Correct
(dB/m) 1.13 7.50 11.25 13.17 17.10 19.96 Result
(dBuV/m) 49.53 47.16 48.91 49.53 50.55 53.26 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-24.47
-26.84
-25.09
-24.47
-23.45
-20.74 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 53 of 95 HARMONICS AND SPURIOUS EMISSIONS (HIGH CHANNEL, VERTICAL) No. 1 2 3 4 5 6 7 Frequency
(MHz) 4950.000 4950.000 6015.000 10560.000 13620.000 17115.000 17745.000 Reading
(dBuV) 56.34 42.41 45.03 37.53 34.51 31.78 29.91 Correct
(dB/m) 1.13 1.13 3.31 11.73 15.99 20.68 22.82 Result
(dBuV/m) 57.47 43.54 48.34 49.26 50.50 52.46 52.73 Limit
(dBuV/m) 74.00 54.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-16.53
-10.46
-25.66
-24.74
-23.50
-21.54
-21.27 Remark peak AVG peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 54 of 95 8.4. SPURIOUS EMISSIONS (18 GHz ~ 26 GHz) 8.4.1. GFSK MODE SPURIOUS EMISSIONS (MID CHANNEL, WORST-CASE CONFIGURATION, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 20000.000 22024.000 23064.000 24248.000 24664.000 25616.000 Reading
(dBuV) 50.81 49.54 48.99 48.82 48.40 47.68 Correct
(dB/m)
-5.45
-4.46
-3.42
-2.83
-2.33
-1.24 Result
(dBuV/m) 45.36 45.08 45.57 45.99 46.07 46.44 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-28.64
-28.92
-28.43
-28.01
-27.93
-27.56 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. The preamplifier only effect to the above 18GHz signal and no filter added to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 55 of 95 SPURIOUS EMISSIONS (MID CHANNEL, WORST-CASE CONFIGURATION, VERTICAL) No. 1 2 3 4 5 6 Frequency
(MHz) 18960.000 19600.000 21544.000 22792.000 24928.000 25728.000 Reading
(dBuV) 50.51 50.29 50.26 49.11 47.04 46.11 Correct
(dB/m)
-5.25
-5.43
-4.63
-3.65
-2.15
-0.72 Result
(dBuV/m) 45.26 44.86 45.63 45.46 44.89 45.39 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-28.74
-29.14
-28.37
-28.54
-29.11
-28.61 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. The preamplifier only effect to the above 18GHz signal and no filter added to the measurement chain. Note: All the modes and channels have been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 56 of 95 8.5. SPURIOUS EMISSIONS (30 MHz ~ 1 GHz) 8.5.1. GFSK MODE SPURIOUS EMISSIONS (MID CHANNEL, WORST-CASE CONFIGURATION, HORIZONTAL) No. 1 2 3 4 5 6 Frequency
(MHz) 30.9700 121.1800 201.6900 337.4900 445.1600 594.5400 Reading
(dBuV) 45.67 52.71 46.15 51.17 39.95 37.99 Correct
(dB/m)
-17.13
-20.62
-16.28
-13.77
-11.90
-8.98 Result
(dBuV/m) 28.54 32.09 29.87 37.40 28.05 29.01 Limit
(dBuV/m) 40.00 43.50 43.50 46.00 46.00 46.00 Margin
(dB)
-11.46
-11.41
-13.63
-8.60
-17.95
-16.99 Remark QP QP QP QP QP QP Note: 1. Result Level = Read Level + Antenna Factor + Cable loss. 2. If Peak Result complies with QP limit, QP Result is deemed to comply with QP limit. 3. Test setup: RBW: 120 kHz, VBW: 300 kHz, Sweep time: auto. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 57 of 95 SPURIOUS EMISSIONS (MID CHANNEL, WORST-CASE CONFIGURATION, VERTICAL) No. 1 2 3 4 5 6 Frequency
(MHz) 51.3400 142.5200 203.6300 372.4100 542.1599 615.8800 Reading
(dBuV) 50.85 48.25 47.67 47.66 39.32 37.56 Correct
(dB/m)
-18.46
-18.80
-16.30
-13.13
-10.02
-8.52 Result
(dBuV/m) 32.39 29.45 31.37 34.53 29.30 29.04 Limit
(dBuV/m) 40.00 43.50 43.50 46.00 46.00 46.00 Margin
(dB)
-7.61
-14.05
-12.13
-11.47
-16.70
-16.96 Remark QP QP QP QP QP QP Note: 1. Result Level = Read Level + Antenna Factor + Cable loss. 2. If Peak Result complies with QP limit, QP Result is deemed to comply with QP limit. 3. Test setup: RBW: 120 kHz, VBW: 300 kHz, Sweep time: auto Note: All the modes and channels have been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 58 of 95 8.6. SPURIOUS EMISSIONS BELOW 30 MHz 8.6.1. GFSK MODE
(MID CHANNEL, LOOP ANTENNA FACE ON TO THE EUT, WORST-CASE CONFIGURATION) 9 kHz~ 150 kHz No. 1 2 3 4 5 6 Frequency
(MHz) 0.0100 0.0131 0.0221 0.0362 0.0636 0.1300 Reading
(dBuV) 74.72 70.97 67.13 63.01 59.31 54.43 Correct
(dB/m)
-101.40
-101.38
-101.35
-101.42
-101.54
-101.70 FCC Result
(dBuV/m)
-26.68
-30.41
-34.22
-38.41
-42.23
-47.27 FCC Limit
(dBuV/m) 47.6 45.25 40.71 36.43 31.53 25.33 Margin
(dB)
-74.28
-75.66
-74.93
-74.84
-73.76
-72.60 Note: 1. If Peak Result complies with AV and QP limit, AV and QP Result are deemed to comply with AV limit. 2. All 3 polarizations(Horizontal, Face-on and Face-off) of the loop antenna had been tested, but only the worst data recorded in the report. Remark peak peak peak peak peak peak UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 59 of 95 150 kHz ~ 490 kHz No. 1 2 3 4 5 6 Frequency
(MHz) 0.1621 0.1832 0.2295 0.2785 0.3382 0.4142 Reading
(dBuV) 73.42 68.49 65.04 61.71 59.23 56.23 Correct
(dB/m)
-101.65
-101.69
-101.77
-101.83
-101.90
-101.98 FCC Result
(dBuV/m)
-28.23
-33.2
-36.73
-40.12
-42.67
-45.75 FCC Limit
(dBuV/m) 23.41 22.35 20.38 18.7 17.02 15.26 Margin
(dB)
-51.64
-55.55
-57.11
-58.82
-59.69
-61.01 Note: 1. If Peak Result complies with AV and QP limit, AV and QP Result are deemed to comply with AV limit. 2. All 3 polarizations(Horizontal, Face-on and Face-off) of the loop antenna had been tested, but only the worst data recorded in the report. Remark peak peak peak peak peak peak UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 60 of 95 490 kHz ~ 30 MHz No. 1 2 3 4 5 6 Frequency
(MHz) 0.5917 0.8679 1.7580 5.2705 10.7299 16.3959 Reading
(dBuV) 63.24 61.85 55.58 53.04 52.98 52.17 Correct
(dB/m)
-62.08
-62.18
-61.93
-61.45
-60.83
-60.96 FCC Result
(dBuV/m) 1.16
-0.33
-6.35
-8.41
-7.85
-8.79 FCC Limit
(dBuV/m) 32.16 28.83 29.54 29.54 29.54 29.54 Margin
(dB)
-31.00
-29.16
-35.89
-37.95
-37.39
-38.33 Remark peak peak peak peak peak peak Note: 1. If Peak Result complies with AV and QP limit, AV and QP Result are deemed to comply with AV limit. 2. All 3 polarizations(Horizontal, Face-on and Face-off) of the loop antenna had been tested, but only the worst data recorded in the report. Note: All the modes and channels have been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 61 of 95 8.7. WORST-CASE CO-LOCATION Module BT GFSK MODE & Module Wireless 5G MODE SPURIOUS EMISSIONS (LOW CHANNEL, WORST-CASE CONFIGURATION, HORIZONTAL) 1-7GHz No. 1 2 3 4 5 6 Frequency
(MHz) 1774.000 3448.000 4800.000 5116.000 5734.000 6388.000 Reading
(dBuV) 45.44 42.34 46.93 40.45 39.76 35.93 Correct
(dB/m)
-10.30
-5.23 0.52 1.47 1.97 3.40 Result
(dBuV/m) 35.14 37.11 47.45 41.92 41.73 39.33 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-38.86
-36.89
-26.55
-32.08
-32.27
-34.67 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for Band reject filter losses. 5. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 62 of 95 SPURIOUS EMISSIONS (LOW CHANNEL, WORST-CASE CONFIGURATION, VERTICAL) 1-7GHz No. 1 2 3 4 5 Frequency
(MHz) 1660.000 2794.000 4800.000 4800.000 6130.000 Reading
(dBuV) 48.09 44.39 55.50 48.05 36.35 Correct
(dB/m)
-11.16
-6.98 0.52 0.52 2.51 Result
(dBuV/m) 36.93 37.41 56.02 48.57 38.86 Limit
(dBuV/m) 74.00 74.00 74.00 54.00 74.00 Margin
(dB)
-37.07
-36.59
-17.98
-5.43
-35.14 Remark peak peak peak AVG peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. AVG: VBW=1/Ton, where: Ton is the transmitting duration. 5. For the transmitting duration, please refer to clause 7.1. 6. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for High Pass Filter losses. 7. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 63 of 95 SPURIOUS EMISSIONS (LOW CHANNEL, WORST-CASE CONFIGURATION, HORIZONTAL) 7-18GHz No. 1 2 3 4 5 6 Frequency
(MHz) 9354.000 10058.000 11763.000 13512.000 16174.000 17109.000 Reading
(dBuV) 35.81 35.21 33.52 33.10 31.49 29.49 Correct
(dB/m) 9.64 10.51 13.17 15.92 18.54 20.91 Result
(dBuV/m) 45.45 45.72 46.69 49.02 50.03 50.40 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-28.55
-28.28
-27.31
-24.98
-23.97
-23.60 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for HPF losses. 5. Proper operation of the transmitter prior to adding the filter to the measurement chain. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 64 of 95 SPURIOUS EMISSIONS (LOW CHANNEL, WORST-CASE CONFIGURATION, VERTICAL) 7-18GHz No. 1 2 3 4 5 6 Frequency
(MHz) 8870.000 10300.000 11510.000 13908.000 16196.000 17747.000 Reading
(dBuV) 36.57 34.89 34.19 32.57 29.73 26.28 Correct
(dB/m) 8.58 11.30 13.39 16.16 18.61 22.92 Result
(dBuV/m) 45.15 46.19 47.58 48.73 48.34 49.20 Limit
(dBuV/m) 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-28.85
-27.81
-26.42
-25.27
-25.66
-24.80 Remark peak peak peak peak peak peak Note: 1. Peak Result = Reading Level + Correct Factor. 2. If Peak Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Peak: Peak detector. 4. Filter losses were only considered in the spurious frequency bands and the authorized band was not corrected for HPF losses. 5. Proper operation of the transmitter prior to adding the filter to the measurement chain. Note: All the modes and antennas had been tested, but only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 65 of 95 9. AC POWER LINE CONDUCTED EMISSIONS LIMITS Please refer to CFR 47 FCC 15.207 (a) FREQUENCY (MHz) 0.15 -0.5 0.50 -5.0 5.0 -30.0 TEST SETUP AND PROCEDURE Refer to ANSI C63.10-2013 clause 6.2. Quasi-peak 66 - 56 *
56.00 60.00 Average 56 - 46 *
46.00 50.00 The EUT is put on a table of non-conducting material that is 80 cm high. The vertical conducting wall of shielding is located 40 cm to the rear of the EUT. The power line of the EUT is connected to the AC mains through a Artificial Mains Network (A.M.N.). A EMI Measurement Receiver
(R&S Test Receiver ESR3) is used to test the emissions from both sides of AC line. According to the requirements in Section 6.2 of ANSI C63.10-2013.Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. The bandwidth of EMI test receiver is set at 9 kHz. The arrangement of the equipment is installed to meet the standards and operating in a manner, which tends to maximize its emission characteristics in a normal application. TEST ENVIRONMENT Temperature Atmosphere Pressure 25.2 C 101 kPa Relative Humidity Test Voltage 64.9 %
AC 120V, 60HZ UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 66 of 95 TEST RESULTS 9.1.1. GFSK MODE LINE L RESULTS (LOW CHANNEL, WORST-CASE CONFIGURATION) Frequency
(MHz) 0.1538 0.1538 0.5178 0.5178 6.5279 6.5279 13.4398 13.4398 25.7276 25.7276 27.6475 27.6475 Reading
(dBuV) 34.83 17.19 31.77 25.04 19.33 17.70 19.29 18.57 23.52 23.20 24.89 24.19 Correct
(dB)
-0.01
-0.01 0.00 0.00 0.03 0.03 0.06 0.06 0.15 0.15 0.20 0.20 Result
(dBuV) 34.82 17.18 31.77 25.04 19.36 17.73 19.35 18.63 23.67 23.35 25.09 24.39 Limit
(dBuV) 65.79 55.79 56.00 46.00 60.00 50.00 60.00 50.00 60.00 50.00 60.00 50.00 Margin
(dB)
-30.97
-38.61
-24.23
-20.96
-40.64
-32.27
-40.65
-31.37
-36.33
-26.65
-34.91
-25.61 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Note: 1. Result = Reading + Correct Factor. 2. If QP Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Test setup: RBW: 200 Hz (9 kHz ~ 150 kHz), 9 kHz (150 kHz ~ 30 MHz). 4. Step size: 80 Hz (0.009 MHz ~ 0.15 MHz), 4 kHz (0.15 MHz ~ 30 MHz), Scan time:
No. 1 2 3 4 5 6 7 8 9 10 11 12 auto. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 67 of 95 LINE N RESULTS (LOW CHANNEL, WORST-CASE CONFIGURATION) No. 1 2 3 4 5 6 7 8 9 10 11 12 Frequency
(MHz) 0.1652 0.1652 0.5178 0.5178 1.1520 1.1520 3.0719 3.0719 4.9919 4.9919 27.6475 27.6475 Reading
(dBuV) 33.79 16.27 32.23 25.43 17.47 9.87 18.87 15.63 20.04 17.31 23.91 23.20 Correct
(dB)
-0.01
-0.01 0.00 0.00 0.01 0.01 0.02 0.02 0.02 0.02 0.20 0.20 Result
(dBuV) 33.78 16.26 32.23 25.43 17.48 9.88 18.89 15.65 20.06 17.33 24.11 23.40 Limit
(dBuV) 65.20 55.20 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 60.00 50.00 Margin
(dB)
-31.42
-38.94
-23.77
-20.57
-38.52
-36.12
-37.11
-30.35
-35.94
-28.67
-35.89
-26.60 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Note: 1. Result = Reading + Correct Factor. 2. If QP Result complies with AV limit, AV Result is deemed to comply with AV limit. 3. Test setup: RBW: 200 Hz (9 kHz ~ 150 kHz), 9 kHz (150 kHz ~ 30 MHz). 4. Step size: 80 Hz (0.009 MHz ~ 0.15 MHz), 4 kHz (0.15 MHz ~ 30 MHz), Scan time:
auto. Note: All the modes have been tested, only the worst data was recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 68 of 95 10. ANTENNA REQUIREMENTS APPLICABLE REQUIREMENTS Please refer to FCC 15.203 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. Please refer to FCC 15.247(b)(4) The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. RESULTS Complies UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 69 of 95 11. Appendix 11.1. Appendix A: 20dB Emission Bandwidth Test Result 11.1.1. Test Mode Antenna DH5 Ant1 3DH5 Ant1 Channel 2402 2441 2480 2402 2441 2480 20db EBW[MHz]
0.942 0.939 0.942 1.284 1.284 1.275 FL[MHz]
2401.541 2440.541 2479.541 2401.358 2440.349 2479.349 FH[MHz]
2402.483 2441.480 2480.483 2402.642 2441.633 2480.624 Verdict PASS PASS PASS PASS PASS PASS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 70 of 95 11.1.2. Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 71 of 95 3DH5_Ant1_2402 3DH5_Ant1_2441 3DH5_Ant1_2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 72 of 95 11.2. Appendix B: Occupied Channel Bandwidth 11.2.1. Test Result Test Mode Antenna DH5 Ant1 3DH5 Ant1 Channel 2402 2441 2480 2402 2441 2480 OCB [MHz]
0.88747 0.86358 0.86600 1.1940 1.1787 1.1848 FL[MHz]
2401.563 2440.562 2479.559 2401.393 2440.404 2479.401 FH[MHz]
2402.451 2441.425 2480.425 2402.587 2441.583 2480.585 Verdict PASS PASS PASS PASS PASS PASS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 73 of 95 11.2.2. Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 74 of 95 3DH5_Ant1_2402 3DH5_Ant1_2441 3DH5_Ant1_2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 75 of 95 11.3. Appendix C: Maximum peak conducted output power 11.3.1. Test Result Test Mode Antenna DH5 3DH5 Ant1 Ant1 Channel 2402 2441 2480 2402 2441 2480 Result[dBm]
3.30 4.31 4.14 1.79 2.61 2.42 Limit[dBm]
30 30 30 21 21 21 Verdict PASS PASS PASS PASS PASS PASS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 76 of 95 11.4. Appendix D: Carrier frequency separation 11.4.1. Test Result Test Mode DH5 3DH5 Antenna Ant1 Ant1 Channel Hop Hop Result[MHz]
1.016 1.004 Limit[MHz]
>=0.942
>=0.856 Verdict PASS PASS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 77 of 95 11.4.2. Test Graphs DH5_Ant1_Hop 3DH5_Ant1_Hop UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 78 of 95 DH1 DH3 DH5 3DH1 3DH3 3DH5 DH1 DH3 DH5 3DH1 3DH3 3DH5 11.5. Appendix E: Time of occupancy 11.5.1. Test Result TestMode Antenna Channel Result[s]
Limit[s]
Verdict FHSS Mode BurstWidth AFHSS Mode BurstWidth
[ms]
0.39 1.65 2.9 0.4 1.65 2.91
[ms]
0.39 1.65 2.9 0.4 1.65 2.91 0.125 0.264 0.309 0.128 0.264 0.31 0.063 0.132 0.155 0.064 0.132 0.155 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Ant1 Hop Hop Hop Hop Hop Hop Hop Hop Hop Hop Hop Hop
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4
<=0.4 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS TestMode Antenna Channel Result[s]
Limit[s]
Verdict UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 79 of 95 11.5.2. Test Graphs DH1_Ant1_Hop DH3_Ant1_Hop DH5_Ant1_Hop UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 80 of 95 3DH1_Ant1_Hop 3DH3_Ant1_Hop 3DH5_Ant1_Hop UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 81 of 95 11.6. Appendix F: Number of hopping channels 11.6.1. Test Result Test Mode DH5 3DH5 Antenna Ant1 Ant1 Channel Hop Hop Result[Num]
79 79 Limit[Num]
>=15
>=15 Verdict PASS PASS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 82 of 95 11.6.2. Test Graphs DH5_Ant1_Hop 3DH5_Ant1_Hop UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 83 of 95 11.7. Appendix G: Band edge measurements Test Result 11.7.1. Test Mode Antenna DH5 Ant1 3DH5 Ant1 ChName Low High Low High Low High Low High Channel 2402 2480 Hop_2402 Hop_2480 2402 2480 Hop_2402 Hop_2480 RefLevel
[dBm]
3.29 1.47 2.45 1.39 0.43
-1.29
-1.05
-2.01 Result
[dBm]
-40.12
-50.37
-47.36
-44.23
-43.61
-50.57
-47.37
-47.13 Limit
[dBm]
<=-16.71
<=-18.53
<=-17.55
<=-18.61
<=-19.57
<=-21.29
<=-21.05
<=-22.01 Verdict PASS PASS PASS PASS PASS PASS PASS PASS UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 84 of 95 11.7.2. Test Graphs DH5_Ant1_Low_2402 DH5_Ant1_High_2480 DH5_Ant1_Low_Hop_2402 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 85 of 95 DH5_Ant1_High_Hop_2480 3DH5_Ant1_Low_2402 3DH5_Ant1_High_2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 86 of 95 3DH5_Ant1_Low_Hop_2402 3DH5_Ant1_High_Hop_2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 87 of 95 11.8. Appendix H: Conducted Spurious Emission 11.8.1. Test Result Test Mode Antenna Channel DH5 Ant1 2441 3DH5 Ant1 2441 FreqRange
[MHz]
Reference 30~1000 1000~26500 Reference 30~1000 1000~26500 Reference 30~1000 1000~26500 Reference 30~1000 1000~26500 Reference 30~1000 1000~26500 Reference 30~1000 1000~26500 RefLevel
[dBm]
3.16
2.22
2.07
0.40
-0.99
-1.41
Result
[dBm]
3.16
-62.58
-46.83 2.22
-63.52
-48.68 2.07
-62.85
-49.41 0.40
-63.08
-52.32
-0.99
-62.77
-53.08
-1.41
-63.09
-54.44 Limit
[dBm]
<=-16.84
<=-16.84
<=-17.78
<=-17.78
<=-17.93
<=-17.93
<=-19.6
<=-19.6
<=-20.99
<=-20.99
<=-21.41
<=-21.41 Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 2402 2480 2402 2480 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 88 of 95 11.8.2. Test Graphs DH5_Ant1_2402_0~Reference DH5_Ant1_2402_30~1000 DH5_Ant1_2402_1000~26500 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 89 of 95 DH5_Ant1_2441_0~Reference DH5_Ant1_2441_30~1000 DH5_Ant1_2441_1000~26500 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 90 of 95 DH5_Ant1_2480_0~Reference DH5_Ant1_2480_30~1000 DH5_Ant1_2480_1000~26500 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 91 of 95 3DH5_Ant1_2402_0~Reference 3DH5_Ant1_2402_30~1000 3DH5_Ant1_2402_1000~26500 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 92 of 95 3DH5_Ant1_2441_0~Reference 3DH5_Ant1_2441_30~1000 3DH5_Ant1_2441_1000~26500 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 93 of 95 3DH5_Ant1_2480_0~Reference 3DH5_Ant1_2480_30~1000 3DH5_Ant1_2480_1000~26500 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 94 of 95 11.9. Appendix I: Duty Cycle Test Result 11.9.1. Mode DH5 3DH5 On Time
(msec) Period
(msec) Duty Cycle x
(Linear) Duty Cycle
(%) 2.90 2.90 3.75 3.75 0.7733 0.7733 77.33 77.33 Duty Cycle Correction Factor
(dB) 1.12 1.12 1/T Minimum VBW
(kHz) 0.345 0.345 Final setting For VBW
(kHz) 0.5 0.5 Note:
Duty Cycle Correction Factor=10log (1/x). Where: x is Duty Cycle (Linear) Where: T is On Time If that calculated VBW is not available on the analyzer then the next higher value should be used. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4789711459-17 Page 95 of 95 11.9.2. Test Graphs DH5_Ant1_2441 3DH5_Ant1_2441 END OF REPORT UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0086 This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-12-23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-12-23
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0005810205
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
HWA450
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/20/2021 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SoundBar | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Listed output power is peak conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
1 | Name |
S****** G****
|
||||
1 | Telephone Number |
+86 0********
|
||||
1 |
S******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0027000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC