all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 973.25 KiB | December 12 2002 / November 12 2002 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Block Diagram | |||||||
1 2 | Block Diagram | December 12 2002 / November 12 2002 | ||||||
1 2 | ID Label/Location Info | December 12 2002 / November 12 2002 | ||||||
1 2 | Block Diagram | / November 12 2002 |
1 2 | Users Manual | Users Manual | 973.25 KiB | December 12 2002 / November 12 2002 |
3-081-016-11 (1) US Video Cassette Recorder Operating Instructions For customers in the USA Many solutions to common problems and service information can be found at www.sony.com/vcrhelp or contact Sony VCR service at 1 (800) VHS-
SONY. To register your purchase of this product, visit:
www.sony.com/productregistration For all other Sony product questions, please call Sony Customer Information Services Company at 1-800-222-SONY (7669). For Customers in Canada If this product is not working properly, please call 1-877-602-2008 for Peace of Mind Warranty Replacement service. For other product related questions please contact our Customer Information Service Centre at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6 SLV-N900 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Precautions Safety
Operate the unit only on 120 V AC, 60 Hz. If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.
This unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord.
One blade of the plug is wider than the other for the purpose of safety and will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, contact your Sony dealer. Installing
Allow adequate air circulation to prevent internal heat buildup.
Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots. 2 WARNING
Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.
Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.
Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers.
Do not place heavy objects on the unit. If the unit is brought directly from a cold to a warm location, moisture may condense inside the VCR and cause damage to the video head and tape. When you first install the unit, or when you move it from a cold to a warm location, wait for about three hours before operating the unit. Information For customers in the USA CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Owners record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No._________________________ Serial No._________________________
Important Safeguards For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them. Use Power sources This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization This set is equipped with a polarized ac power cord plug (a plug having one blade wider than the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow the instructions below:
For the set with a polarized ac power cord plug:
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in. For the set with a three-wire grounding type ac plug:
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Object and Liquid Entry Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards. Cleaning Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. Installation Water and Moisture Do not use power-line operated sets near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Power-Cord Protection Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance. Accessories Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart stand tripod, bracket, or table recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. S3125A Ventilation The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.
Never cover the slots and openings with a cloth or other materials.
Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface. Important Safeguards 3
Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Antennas Outdoor antenna grounding If an outdoor antenna or cable system is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Antenna Grounding According to the National Electrical Code Ground Clamp Electric Service Equipment Antenna Lead in Wire Antenna Discharge unit
(NEC Section 810-20) Grounding Conductors
(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System
(NEC Art 250 Part H) NEC-NATIONAL ELECTRICAL CODE Lightning For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges. Service Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:
When the power cord or plug is damaged or frayed. If liquid has been spilled or objects have fallen into the set. If the set has been exposed to rain or water. If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.
When the set exhibits a distinct change in performance - this indicates a need for service. Servicing Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition. 4 Important Safeguards
Table of contents Getting Started 6 Step 1 : Unpacking 7 Step 2 : Setting up the remote commander 10 Step 3 : Hookups 23 Step 4 : Selecting a language 24 Step 5 : Setting the clock 29 Step 6 : Presetting channels 33 Step 7 : Setting up the cable box control 39 Step 8 : Setting up the VCR Plus+ C3 system G e t t i n g S t a r t e d Basic Operations 42 Playing a tape 45 Recording TV programs 48 Recording TV programs using the Dial Timer 53 Recording TV programs using the VCR Plus+ C3 system 56 Setting the timer manually 59 Locking the VCR (Child Lock) Additional Operations 60 Playing/searching at various speeds 62 Quick Timer Recording 63 Checking/changing/canceling timer settings 65 Recording stereo and bilingual programs 66 Searching using various functions 68 Adjusting the picture (tracking) 69 Changing menu options 71 Editing with another VCR Additional Information 73 Antenna information 74 Troubleshooting 76 Specifications 77 Index to parts and controls 82 Index Back Cover Quick reference to using the VCR
* VCR Plus+ C3 and PlusCode are registered trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation. Caution Television programs, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmission and/or program owner. Table of contents 5 Getting Started Step 1 : Unpacking Check that you have received the following items with the VCR:
Remote commander
Size AA (R6) batteries
75-ohm coaxial cable with F-type connectors 6 Unpacking Step 2 : Setting up the remote commander G e t t i n g S t a r t e d Remote sensor Inserting the batteries Insert two size AA (R6) batteries by matching the + and on the batteries to the diagram inside the battery compartment. Insert the negative () end first, then push in and down until the positive (+) end clicks into position. Using the remote commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot () can be used to operate your Sony TV. If the TV does not have the symbol near the remote sensor, this remote commander will not operate the TV.
TV / VIDEO 1 4 2 5 3 6 To operate Set TV / VIDEO to the VCR VIDEO and point at the remote sensor at the VCR a Sony TV
TV and point at the remote sensor at the TV Notes
With normal use, the batteries should last about three to six months. If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.
Do not use a new battery with an old one.
Do not use different types of batteries. continued Setting up the remote commander 7
Controlling other TVs with the remote commander The remote commander is preprogramed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturers code number. 1 Set TV / VIDEO at the top of the remote commander to TV . 2 Hold down ?/1, and enter your TVs code number using the number buttons. Then release ?/1. Now you can use the ?/1, VOL +/, CH +/, and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot () to control a Sony TV. To control the VCR, reset TV / VIDEO to VIDEO. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. TV brand Code number Sony Akai AOC Centurion Coronado Curtis-Mathes Daytron Emerson Fisher 01 04 04 12 03 12 12 03, 04, 14 11 General Electric 06, 10 Gold Star Hitachi J.C.Penney JVC KMC Magnavox Marantz 03, 04, 17 02, 03 04, 12 09 03 03, 08, 12 04, 13 MGA/Mitsubishi 04, 12, 13, 17 NEC 04, 12 TV brand Panasonic Philco Philips Pioneer Portland Quasar Radio Shack RCA Sampo Sanyo Scott Sears Sharp Sylvania Teknika Toshiba Wards Yorx Zenith Code number 06, 19 03, 04 08 16 03 06, 18 05, 14 04, 10 12 11 12 07, 10, 11 03, 05, 18 08, 12 03, 08, 14 07 03, 04, 12 12 15 8 Setting up the remote commander Notes If you enter a new code number, the code number previously entered will be erased. If the TV uses a different remote control system from the one programed to work with the VCR, you cannot control your TV with the remote commander.
When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries.
When you press the AUDIO MONITOR button, your TVs menu may appear on the TV screen. To exit the TV menu, press the MENU button on the TV remote commander or wait until the menu disappears automatically. G e t t i n g S t a r t e d Setting up the remote commander 9
Step 3 : Hookups Selecting the best hookup option There are many ways in which your VCR can be hooked up. To hook up your VCR so that it works best for you, first scan through the table below. Then use the accompanying diagrams and procedures on the following pages to set up your VCR. If your TV has audio/video inputs, refer to page 12 for audio/video (A/V) hookup. Then follow one of the hookups below. If your TV does not have A/V inputs, perform directly one of the hookups below. If you have Use Refer to Antenna only, no cable TV No cable box or cable box with only a few scrambled channels Cable box with many scrambled channels A cable box that is compatible with an infrared remote control A digital broadcast services digital satellite receiver that is compatible with an infrared remote control Hookup 1
(Plug and Play) Hookup 2
(Plug and Play) Pages 14 and 15 Pages 16 and 17 Hookup 3 Page 18 Hookup 4 Page 19 Hookup 5 Page 21 After you have completed the connections, follow the instructions for setup. After you have completed the setup, you are ready to use your VCR. Procedures differ depending on the hookup you used. For an overview, refer to Quick reference to using the VCR on the back cover. Before you get started
Turn off the power to all equipment.
Do not connect the AC power cords until all of the connections are completed. If you connect the AC power cord before the connections are completed, you may not be able to use the Plug and Play function.
Be sure you make connections firmly. Loose connections may cause picture distortion.
If your TV does not match any of the examples provided, see your nearest Sony dealer or qualified technician. 10 Hookups Caution Connections between the VCRs VHF/UHF connector and the antenna terminals of the TV receiver should be made only as shown in the following instructions. Failure to do so may result in operation that violates the regulations of the Federal Communications Commission regarding the use and operation of RF devices. Never connect the output of the VCR to an antenna or make simultaneous (parallel) antenna and VCR connections at the antenna terminals of your receiver. Note to CATV system installer (in USA) This reminder is provided to call the CATV system installers attention to Article 820- 40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. G e t t i n g S t a r t e d Hookups 11 Audio/video (A/V) hookup If your TV has audio/video (A/V) input jacks, you will get a better picture and sound if you hook up your VCR using these connections. For a true home theater experience, you should connect the audio outputs of your VCR or TV to your stereo system. If your TV does not have A/V inputs, see the following pages for antenna or cable hookups. If your TV has the Control S function, hook up your VCR using the connection shown on page 13. This will allow you to operate your VCR by pointing your VCRs remote commander at your TV. If you are not planning to use your VCR to record programs, you finished setting up the VCR after you have made the connections shown on this page. If you want to record regular or cable TV programs, complete these connections first, and then go to the following pages for antenna or cable hookups. A Use this hookup if your TV has stereo jacks VCR LINE OUT LINE IN 1 AUDIO VIDEO TV IN VIDEO AUDIO AUDIO OUT Stereo receiver AUX IN Audio/video cable (not supplied) Audio cable (not supplied) B Use this hookup if your TV does not have stereo jacks VCR LINE OUT LINE IN 1 AUDIO VIDEO TV IN VIDEO AUDIO Stereo receiver AUX IN Video cable (not supplied) Audio cable (not supplied) 12 Hookups C Use this hookup if your TV has the Control S function VCR LINE OUT LINE IN 1 AUDIO VIDEO CONTROL S IN Stereo receiver AUX IN TV CONTROL S OUT IN VIDEO AUDIO AUDIO OUT Video cable (not supplied) Audio/video cable
(not supplied) Audio cable (not supplied) Notes
To play a tape in stereo, you must use the A/V connection. If you do not have a stereo receiver, connect the white LINE OUT/AUDIO L jack to the AUDIO IN jack on your TV.
Use a Control S cable (not supplied) for Control S connections. G e t t i n g S t a r t e d Hookups 13
Hookup 1 (Plug and Play) Antenna hookup Make the following connections if you are using an antenna (if you do not have cable TV). A Use this hookup if you are using:
VHF/UHF antenna (you get channels 213 and channels 14 and higher)
UHF-only antenna (you get channels 14 and higher)
Separate VHF and UHF antennas Rear of TV VHF/UHF A Match the type of connector on your TV: A, B, or C. VCR IN OUT or or VHF B UHF VHF C UHF B Use this hookup if you are using a VHF-only antenna (you get channels 213 only) VCR IN OUT or or Rear of TV VHF/UHF Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. A VHF B UHF VHF C UHF If you cannot connect your antenna cable to the VCR directly If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external antenna connector (not supplied) so you can connect the cable to the RF IN connector. If you have separate cables for VHF and UHF antennas, you should use a U/V band mixer (not supplied) (page 73). 14 Hookups Hookup 1 : VCR setup Plug the VCR into the AC outlet. The VCR automatically presets the VCRs clock and TV channels when the VCR is plugged into the AC outlet. G e t t i n g S t a r t e d AC power cord to AC outlet The VCR starts presetting the clock and channels. When Auto preset is completed, the current time appears in the display window. You have now completed VCR setup. To change the on-screen display language to French or Spanish, see Step 4 : Selecting a language on page 23. The clock is set using a time signal provided by some TV channels. If the clock is incorrect, or --:-- appears in the display window, see Using Manual Clock Set on page 27. To add or disable channels manually, see Presetting/disabling channels manually on page 31. Notes If you connect the AC power cord before the antenna connections are completed, the channels may be incorrectly set. If this happens, see Step 6 : Presetting channels on page 29.
Do not press any buttons on the VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time after you purchase the VCR.
Auto preset can be performed by pressing x STOP on the VCR continuously for 5 seconds or more with the VCR power turned off. Hookups 15
Hookup 2 (Plug and Play) You have no cable box, or a cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels. What you can do with this hookup
Record any unscrambled channel by selecting the channel on the VCR What you cannot do
Record scrambled channels that require a cable box Wall VCR IN OUT Connect this cable directly to your TV if you do not have a cable box. Cable box IN OUT or or Rear of TV VHF/UHF A VHF UHF VHF UHF B C Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. 16 Hookups Hookup 2 : VCR setup Plug the VCR into the AC outlet. The VCR automatically presets the VCRs clock and TV channels when the VCR is plugged into the AC outlet. G e t t i n g S t a r t e d AC power cord to AC outlet The VCR starts presetting the clock and channels. When Auto preset is completed, the current time appears in the display window. You have now completed VCR setup. To change the on-screen display language to French or Spanish, see Step 4 : Selecting a language on page 23. The clock is set using a time signal provided by some TV channels. If the clock is incorrect, or --:-- appears in the display window, see Using Manual Clock Set on page 27. To add or disable channels manually, see Presetting/disabling channels manually on page 31. Notes If you connect the AC power cord before the antenna connections are completed, the channels may be incorrectly set. If this happens, see Step 6 : Presetting channels on page 29.
Do not press any buttons on the VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time after you purchase the VCR.
Auto preset can be performed by pressing x STOP on the VCR continuously for 5 seconds or more with the VCR power turned off. Hookups 17
Hookup 3 Connecting a cable box with many scrambled channels Recommended use Use this hookup if your cable system scrambles all or most channels. What you can do with this hookup
Record any channel by selecting the channel on the cable box What you cannot do
Record with the cable box turned off
Record one channel while watching another channel Wall Cable box IN OUT VCR IN OUT Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. or or Rear of TV VHF/UHF A VHF UHF VHF UHF B C After you have completed hookup After you have completed hookup, plug the VCR into the AC outlet and see Step 4 : Selecting a language on page 23. AC power cord to AC outlet 18 Hookups Hookup 4 Using the cable box control feature Recommended use You should use this hookup if you have a cable box, especially if your cable system scrambles all or most channels. This hookup allows the VCRs cable box control feature to control the channels on the cable box, simplifying the recording process. A list of compatible cable boxes is on page 36 and 36. What you can do with this hookup
Record any channel by using the cable box control feature to select channels on the G e t t i n g S t a r t e d cable box What you cannot do
Record with the cable box turned off
Record one channel while watching another channel Wall Cable box IN OUT VCR VHF/UHF IN OUT Rear of TV VHF/UHF A VHF UHF VHF B C or or Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. UHF Positioning the Cable box Place the Cable box on top of the VCR so that it may not block the sensor window on the VCR. Side view continued Hookups 19 After you have completed hookup After you have completed hookup, plug the VCR into the AC outlet and see Step 4 : Selecting a language on page 23. AC power cord to AC outlet 20 Hookups Hookup 5 Connecting to a digital satellite receiver Recommended use Use this hookup if you have a digital satellite receiver that is compatible with an infared remote control. It allows the VCRs cable box control feature to control the channel on the digital satellite receiver, simplifying the recording process. A list of compatible digital satellite receivers is on page 36. What you can do with this hookup
Record any channels by using the cable box control feature to select channels on the digital satellite recever G e t t i n g S t a r t e d What you cannot do
Record with the digital satellite receiver turned off
Record any channels from cable or an antenna (To record channels from cable or an antenna, turn off the cable box control feature.)
Use a cable box
Record programs with the VCR Plus+ C 3 system (To use the VCR Plus+ C3 system, turn off the cable box control feature.) Wall or VCR LINE OUT LINE IN 1 AUDIO VIDEO VHF/UHF IN OUT LINE OUT AUDIO VIDEO VHF/UHF IN OUT Digital satellite receiver or or Rear of TV VHF/UHF A VHF B UHF VHF C UHF Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. Positioning the Digital satellite receiver Place the Digital satellite receiver so that it may not block the remote sensor window on the digital satellite receiver. Side view continued Hookups 21 After you have completed hookup After you have completed hookup, plug the VCR into the AC outlet and see Step 4 : Selecting a language on page 23. AC power cord to AC outlet Note
To successfully record a program from the digital satellite receiver, proceed as follows:
Leave the digital satellite receiver on all the time. Turn off the display (menu screen, channel number, etc.) of the digital satellite receiver. To record or receive locked channels, unlock the channel before the VCR starts recording. To set pay-per-view programs in the timer setting, order the pay-per-view program before the VCR starts recording. Some programs are copy protected. You cannot record these programs. 22 Hookups Step 4 : Selecting a language You can change the on-screen display language. Before you start
Turn on the VCR and the TV.
Set the VCR Output CH to 3CH or 4CH in ADVANCED OPTIONS menu
(page 69). If both are used, set the VCR Output CH to either channel. If your TV is connected to the VCR using A/V connections, set the TV to video input.
Press TV/VIDEO to display the VIDEO indicator in the VCRs display window. G e t t i n g S t a r t e d MENU M/m/, MENU Press MENU. Press M/m to move the cursor (B) to Language/Idioma/Langue. MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set Vv b
Quit
: MENU Press , to select the desired language, French or Spanish. 1 2 3 4 PLAY OK PLAY OK MENU Press MENU to exit the menu. Selecting a language 23 Step 5 : Setting the clock Using the Auto Clock Set feature Some TV and cable channels transmit time signals with their broadcasts. Your VCR can pick up this time signal to automatically set the clock. The Auto Clock Set feature works only if a channel in your area is broadcasting a time signal. If broadcasters in your area are not yet sending time signals, set the time manually (page 27). Before you start
Turn on the VCR and the TV. When using a cable box, turn it on.
Set the VCR Output CH to 3CH or 4CH in ADVANCED OPTIONS menu
(page 69). If both are used, set the VCR Output CH to either channel. If your TV is connected to the VCR using A/V connections, set the TV to video input.
Press TV/VIDEO to display the VIDEO indicator in the VCRs display window. MENU M/m/</, OK 1 2 MENU Press MENU. Press M/m to move the cursor (B) to Clock set, then press OK. PLAY OK MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU CLOCK SET AUTO MANUAL Select Set
Vv OK Quit
: MENU 24 Setting the clock 3 4 5 6 PLAY OK PLAY OK Press M/m to select AUTO, then press OK. Press M/m to select the item you want. Then press </, to make the setting and press OK.
For Clock set CH Leave the setting to AUTO to have the VCR automatically search for a channel that carries a time signal. Press </, to select a channel that carries a time signal. Use this option if you know of a channel that carries a time signal. Most PBS member stations broadcast a time signal. For the fastest response, select your local PBS station.
For Time zone Select the time zone of your area, or select AUTO to have the VCR automatically set your time zone. The options are:
AUTO y Atl. (Atlantic) y East (Eastern) y Cen. (Central) y Mtn. (Mountain) y Pac. (Pacific) y Alas (Alaska) y Haw. (Hawaii) y AUTO
For Daylight Saving Select YES or NO (standard time), or AUTO to have the VCR automatically set the daylight saving time. CLOCK SET Clock set CH:
Time zone:
Daylight Saving:
AUTO AUTO AUTO
Select End
Vv OK Set Quit
: Bb
: MENU CLOCK SET Clock set CH:
Time zone:
Daylight Saving:
1 2 3 AUTO AUTO
Select End
Vv OK Set Quit
: Bb
: MENU G e t t i n g S t a r t e d CLOCK SET Clock set CH:
Time zone:
Daylight Saving:
AUTO Pac. AUTO
Select End
Vv OK Set Quit
: Bb
: MENU CLOCK SET Clock set CH:
Time zone:
Daylight Saving:
AUTO AUTO NO[
Select End
Vv OK Set Quit
: Bb
: MENU MENU Press MENU to exit the menu. To activate the Auto Clock Set function, turn off the VCR. continued Setting the clock 25 Notes
The clock cannot be set automatically if you do not receive a channel that carries a time signal in your area. If so, set the clock manually (page 27). If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 20 minutes. If nothing happens even after you wait about 20 minutes, set the clock manually (page 27). If you made Hookup 3 or 4, make sure you leave the cable box on. 26 Setting the clock
Using Manual Clock Set Before you start
Turn on the VCR and the TV.
Set the VCR Output CH to 3CH or 4CH in ADVANCED OPTIONS menu
(page 69). If both are used, set the VCR Output CH to either channel. If your TV is connected to the VCR using A/V connections, set the TV to video input.
Press TV/VIDEO to display the VIDEO indicator in the VCRs display window. G e t t i n g S t a r t e d MENU M/m/, OK MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU CLOCK SET AUTO MANUAL Select Set
Vv OK Quit
: MENU MENU Press MENU. 1 2 3 PLAY OK PLAY OK Press M/m to move the cursor (B) to Clock set, then press OK. Press M/m to select MANUAL, then press OK. CLOCK SET DATE 1 0 1 2 0
YEAR 0 3 WED :12 TIME 0 0 AM Select End
Bb OK Set Quit
: Vv
: MENU continued Setting the clock 27 Press M/m to set the month. CLOCK SET DATE 9 0 1 2 0
YEAR 0 3 MON :12 TIME 0 0 AM Select End
Bb OK Set Quit
: Vv
: MENU Press , to flash the day and press M/m to set the day. CLOCK SET DATE YEAR 9 2 8 2 0
0 3 SUN TIME
:12 0 0 AM Select End
Bb OK Set Quit
: Vv
: MENU Set the year, hour, and minutes in the same way as the day. The day of the week is set automatically. Press OK or MENU to start the clock. 4 5 6 7 PLAY OK PLAY OK PLAY OK MENU 28 Setting the clock G e t t i n g S t a r t e d MENU M/m/</, OK Step 6 : Presetting channels
(Skip this section if you are using a cable box or digital satellite receiver control.) This VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using automatic presetting methods. Then, if there are any unwanted channels, disable them manually. If you have already decided which channels you wish to preset, set them directly using manual presetting methods (page 31). Presetting all receivable channels automatically Before you start
Turn on the VCR and the TV.
Set the VCR Output CH to 3CH or 4CH in ADVANCED OPTIONS menu
(page 69). If both are used, set the VCR Output CH to either channel. If your TV is connected to the VCR using A/V connections, set the TV to video input.
Press TV/VIDEO to display the VIDEO indicator in the VCRs display window. 1 2 MENU Press MENU. Press M/m to move the cursor (B) to Tuner preset, then press OK. PLAY OK MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU TUNER PRESET
CABLE
Ant / Cable:
Auto preset Channel add / erase Guide channel setup Select End
Vv OK Set Quit
: Bb
: MENU continued Presetting channels 29 Press M/m to move the cursor (B) to Ant/Cable.
To preset cable TV channels:
Press </, to select CABLE.
To preset VHF and UHF channels:
Press </, to select ANTENNA. TUNER PRESET
CABLE
Ant / Cable:
Auto preset Channel add / erase Guide channel setup Select End
Vv OK Set Quit
: Bb
: MENU TUNER PRESET ANTENNA
Ant / Cable:
Auto preset Channel add / erase Guide channel setup
Select End
Vv OK Set Quit
: Bb
: MENU Auto preset 02CH
please wait Press M/m to move the cursor (B) to Auto preset, then press OK. All receivable channels are preset in numerical sequence. When no more receivable channels can be found, presetting stops and the picture from the lowest numbered channel is displayed on the TV screen. 3 4 5 PLAY OK PLAY OK PLAY OK PLAY OK 30 Presetting channels Presetting/disabling channels manually Before you start
Turn on the VCR and the TV.
Set the VCR Output CH to 3CH or 4CH in ADVANCED OPTIONS menu
(page 69). If both are used, set the VCR Output CH to either channel. If your TV is connected to the VCR using A/V connections, set the TV to video input.
Press TV/VIDEO to display the VIDEO indicator in the VCRs display window. 3 6 9 1 4 7 2 5 8 0 G e t t i n g S t a r t e d Number buttons ENTER CH +/
MENU M/m/</, OK 1 2 MENU Press MENU. Press M/m to move the cursor (B) to Tuner preset, then press OK. PLAY OK MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU TUNER PRESET Ant / Cable:
Auto preset Channel add / erase Guide channel setup
CABLE
Select End
Vv OK Set Quit
: Bb
: MENU continued Presetting channels 31 3 4 Press M/m to move the cursor (B) to Channel add/erase, then press OK. PLAY OK 3 6 9 1 4 7 2 5 8 0
To preset a channel:
1 Press the number buttons to enter the channel number, then press ENTER. 2 Press ,, then press OK or MENU. Channel to be preset CHANNEL ADD / ERASE
Select channel:
]1 and press press
]b
]B to ADD to ERASE End
OK Quit
: MENU
To disable a channel:
1 Press CH +/ to select the channel number. 2 Press <, then press OK or MENU. Channel to be disabled CHANNEL ADD / ERASE
Select channel:
5
and press press
]b
]B to ADD to ERASE End
OK Quit
: MENU PLAY OK MENU
CH PLAY OK MENU 32 Presetting channels Step 7 : Setting up the cable box control
(Skip this section if you are using Hookup 1, 2, or 3.) Your VCR includes a cable box control feature that allows the VCR to control cable boxes or digital satellite receivers equipped with an infrared remote control. With the cable box control, the VCR controls channels on the cable box or digital satelite receiver for timer recording. You can also use the VCRs remote commander to change channels on the cable box or digital satellite receiver whenever the cable box or digital satellite receiver is turned on even if the VCR is turned off. To use cable box control, you need to set the code number and output channel. This VCR is programmed with codes necessary to control channel selection on most brands of cable boxes or digital satellite receivers at the time this VCR was manufactured. It is possible that new cable boxes may be introduced that cannot be controlled with this VCR. If you have a cable box that is incompatible with this VCR, contact your cable operatorthey may be able to provide you with a compatible cable box. 1 MENU Press MENU. G e t t i n g S t a r t e d 3 6 9 1 4 7 2 5 8 0 Number buttons MENU M/m OK MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU continued Setting up the cable box control 33 PLAY OK PLAY OK PLAY OK PLAY OK 2 3 4 5 6 7 Press M/m to move the cursor (B) to Cable Box Control, then press OK. CABLE BOX CONTROL Cable Box Use Box Code No. Box Output CH
OF F CH3
Select End
Vv OK Set Quit
: Bb
: MENU Press M/m to move the cursor (B) to Cable Box Use. Press </, to select ON, then press OK. Press M/m to move the cursor (B) to Box Code No., then press OK. When Box Code No. is ---, skip this step. 3 6 9 1 4 7 2 5 8 0 Press the number buttons to enter the cable box or digital satellite receiver code number, then press OK. Find your cable box or digital satellite receiver code number from the following chart. PLAY OK PLAY OK Press M/m to move the cursor (B) to Box Output CH. CABLE BOX CONTROL Cable Box Use Box Code No. Box Output CH ON[
790
CH3
Select End
Vv OK Set Quit
: Bb
: MENU CABLE BOX CONTROL Cable Box Use Box Code No. Box Output CH ON[
790
CH3
Select End
Vv OK Set Quit
: Bb
: MENU CABLE BOX CONTROL Cable Box Use Box Code No. Box Output CH ON[
210
CH3
Select End
Vv OK Set Quit
: Bb
: MENU CABLE BOX CONTROL Cable Box Use Box Code No. Box Output CH ON[
210
CH3
Select End
Vv OK Set Quit
: Bb
: MENU 34 Setting up the cable box control 8 9 PLAY OK If you want to control a cable box, press </, to select the cable box output channel, then press OK. If you want to control a digital satellite receiver, select LINE, then press OK. MENU Press MENU to exit the menu. G e t t i n g S t a r t e d continued Setting up the cable box control 35 Cable box and digital satellite receiver brands and the corresponding code numbers If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. Cable box brand Code numbers Anvison Archer Cablestar Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini General Instrument Hamlin Hitachi Jerrold Macom Magnavox Movie time NSC OAK OAK Sigma Panasonic Philips Pioneer Pulsar Randtek RCA Realistic Regal 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 1, 20, 21, 29, 42, 44, 63, 88, 91 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 30, 42, 44, 52, 63, 88 30, 42, 44, 52, 63, 88 8, 9, 56, 61 1, 20, 21, 29, 42, 44, 63, 88, 91 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 26, 28 30, 42, 44, 52, 63, 88 4, 30, 85 1, 2, 3, 4, 31, 34, 55, 85, 91 14, 15, 28, 41 31, 79, 80 1, 2, 3, 4, 31, 34, 55, 85, 91 31, 79, 80 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 29, 32, 38, 39, 42, 44, 88 29, 32, 38, 39, 42, 44, 88 10, 11, 12, 13, 46 10, 11, 12, 13, 46 6, 8, 16, 17 4, 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 5, 6, 78 30, 42, 44, 52, 63, 88 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 6, 8, 16, 17 44, 88 14, 23, 41, 84 36 Setting up the cable box control Cable box brand Code numbers Regency Rembrandt Samsung Scientific Atlanta Sheritech SL Mark Sony
(CABLEVISION) Sprucer Stargate 26, 28 29, 32, 38, 39, 42, 44, 88 4, 6, 32, 42, 78 8, 9, 56, 61 27 4, 6, 32, 42, 78 96 6, 8, 16, 17 4, 6, 30, 32, 42, 44, 52, 63, 78, 88 19 74 77 4, 6, 32, 42, 78 18, 19 1, 33, 34, 42, 48, 49, 73, 91 36 1, 20, 21, 29, 42, 44, 63, 88, 91 29, 42, 43, 44, 52, 63, 82, 88 7, 23, 45, 50, 84 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 6 7, 23, 45, 50, 84 Code numbers 100, 104 101 103 105 102 Sylvania Teknica Telecaption Teleview Texscan Tocom Toshiba Unika Universal Videoway Viewstar Warner Amex Zenith Digital satellite receiver brand Sony Panasonic RCA Samsung Toshiba To ensure correct operation
Place the cable box or digital satellite receiver so that it may not block the sensor window on the VCR.
Do not place the cable box or digital satellite receiver on top of the TV.
Position the cable box or digital satellite receiver on top of the VCR.
Point the remote commander at the VCR, not at the cable box or digital satellite receiver. Side view 1 4 7 3 6 9 2 5 8 0 To chack the cable box control setting 1 Press CH +/ on the remote commander. Does the channel indicator on the cable box or digital satellite receiver change? (Point the remote commander at the VCR, not at the cable box or digital satellite receiver.) 2 Press all 10 number buttons (0 to 9) on the remote commander. Does the channel indicator on the cable box or digital satellite receiver change?
If the answer to both 1 and 2 is yes, you have made the correct setting. 37 Setting up the cable box control continued If you cannot get your VCR to control the cable box or digital satellite receiver
Check the position of the cable box or digital satellite receiver.
Place the cable box or digital satellite receiver on top of the VCR. Do not place the cable box or digital satellite receiver and VCR away form each other.
Try the setup again making sure to use the correct control code. If the cable box still does not respond, try the other codes that are listed. If your cable box still does not operate with this VCR, contact your cable company to see if they can provide you with a compatible cable box. 38 Setting up the cable box control Step 8 : Setting up the VCR Plus+ C3 system How the VCR Plus+ C3 system works Whenever you want to record a TV program, all you need to do is look up the PlusCode number, a number assigned to each program published in the TV section of most newspapers, cable TV listings, and even TV GUIDE magazine. Then, just enter the PlusCode number of the program you want and the VCR is automatically programed to record that show. Its that simple. How to set up your VCR Setting up your VCR involves coordinating the TV channel number (the number you turn to on your TV or VCR to watch a program) with the guide channel (the number that is assigned to that channel in your program guide). To find the guide channel numbers, look at the Channel Line-up Chart in the program guide for your area that features VCR PlusCode numbers. It usually looks like the example to the right. To set the guide channels, use the Channel Line-up Chart to check that the guide channel numbers match the TV channel your VCR receives. For example, if HBO is listed in the Channel Line-up Chart as channel 33, and your VCR receives HBO on channel 5, you need to coordinate these numbers using the following procedure. If the guide and TV channel numbers are the same, you can skip this procedure. G e t t i n g S t a r t e d Example of PlusCode PlusCode 5:30 6:30 Golf (1hr. 25min.) 42060 MOVIE Musical (2hrs.) 33044 SPORT 14 2 CNN 2 3 4 5 SCIENCE AND TECHNOLOGY
(1hr. 15min.) 73457 WS 9974 DRAMA Comedy (2hrs.) 17390 Example of Channel Line-up Chart CABLE CH CABLE TV VCR Plus+
GUIDE CH 16 17 20 21 22 25 34 35 5 27 29 30 31 38 39 45 17 44 49 50 51 AMC BRV American Movie Classics Bravo (program grid only) ESPN The Family Channel Cable News Network The Discovery Channel CNN CSP DIS DSC ESN FAM HBO LIF MAX MTV C-SPAN The Disney Channel SAMPLE Home Box Office Music Television Sports Channel Nickelodeon Cinemax Lifetime Sports Channel America NIK Showtime TBS SuperStation The Movie Channel The Nashville Network Turner Network Television USA Network SC SCA SHO TBS TMC TNN TNT USA 35 54 42 28 53 37 34 47 33 46 45 48 38 59 70 41 43 58 49 52 44 continued Setting up the VCR Plus+ C3 system 39 3 6 9 1 4 7 2 5 8 0 MENU M/m/</, OK MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU TUNER PRESET
CABLE
Ant / Cable:
Auto preset Channel add / erase Guide channel setup Select End
Vv OK Set Quit
: Bb
: MENU 1 2 MENU Press MENU. Press M/m to move the cursor (B) to Tuner preset, then press OK. PLAY OK 40 Setting up the VCR Plus+ C3 system 3 4 5 6 7 8 PLAY OK PLAY OK PLAY OK PLAY OK MENU Press M/m to move the cursor (B) to Guide channel setup, then press OK. GUIDE CHANNEL SETUP
[GUIDE CH]
v
[TV CH]
Enter actual receiving channel Bb
Set OK
Quit Vv
: MENU Select End The upper row shows VCR Plus+ C3 guide channels and the lower row shows TV channels or cable box out put channels. Press </, to select the channel number that does not match the guide channel.
If you made Hookup 1 or 2: Enter the actual number on your TV (and VCR), then press M/m.
If you made Hookup 3: Enter the cable box output channel (usually 2, 3, or 4), then press M/m. Repeat steps 4 and 5 for each channel number that does not match. G e t t i n g S t a r t e d Press OK to confirm the setting. Press MENU to exit the menu. Setting up the VCR Plus+ C3 system 41 Basic Operations Playing a tape 3 6 9 1 4 7 2 5 8 0
?/1 Z EJECT CLEAR DISPLAY REPLAY X PAUSE COMMERCIAL SKIP H PLAY M FF x STOP m REW 1 2 Turn on your TV and set it to the video channel. Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 42 Playing a tape 3 PLAY OK Press H PLAY. The display window shows the playback time and playback direction. When the tape reaches the end, it will rewind automatically. Hour Minute Additional tasks To Stop play Pause play Press x STOP X PAUSE Resume play after pause X PAUSE or H PLAY Fast-forward the tape Rewind the tape Eject the tape M FF during stop m REW during stop Z EJECT To play a recently watched scene You can immediately rewind and playback the scene you want to watch again. During playback, press REPLAY. The VCR rewinds the tape about ten seconds on the counter for each press of the button, and restarts playback. To skip playback You can skip a portion of playback you do not want to watch (such as a commercial) and restart playback. During playback, press COMMERCIAL SKIP up to four times. The VCR skips the tape 30 seconds on the counter for each press of the button, and restarts playback. To turn off the power while rewinding (Rewind Shut Off) Press ?/1 while the tape is rewinding. The power will turn off but the tape will keep rewinding until it reaches the end. B a s i c O p e r a t i o n s continued Playing a tape 43 To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to 0:00:00. To search for the counter 0:00:00 point automatically, see To search for the counter 0:00:00 point on page 67. To display the counter on the TV screen, press DISPLAY. Notes
Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed.
While displaying a menu on the TV screen, you cannot use H PLAY, X PAUSE, M FF, m REW, or x STOP buttons.
The counter resets to 0:00:00 in the display window and on the TV screen whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
When 10 hours have passed, the counter in the display window returns to 0:00:00 and the count starts over again.
When playback does not start even if you insert a tape with its safety tab removed, set Auto play in the ADVANCED OPTIONS menu correctly (page 69). 44 Playing a tape Recording TV programs 3 6 9 1 4 7 2 5 8 0 TV/VIDEO COUNTER/
REMAIN DISPLAY ENTER SP/EP CH +/
INPUT SELECT z REC x STOP B a s i c O p e r a t i o n s 1 2 Turn on your TV and set it to the video channel. To record from a cable box, turn it on. Insert a tape with its safety tab in place. continued Recording TV programs 45 3 4 5
CH Press CH +/ to select the channel or line input video source you want to record. SP / EP Press SP/EP to select the tape speed, SP or EP. EP (Extended Play) provides recording time three times as long as SP
(Standard Play). However, SP produces better picture and audio quality. REC Press z REC to start recording. REC appears in the display window. To stop recording Press x STOP. To check the remaining tape length Press DISPLAY. With the display on, press COUNTER/REMAIN to check the remaining time. Each time you press COUNTER/REMAIN, the time counter and the remaining tape length appear alternately. The white bar indicates the current location in relation to the entire tape length. The remaining time also appears in the display window. 0 0 0 3 0 SP
Rem 1 3 8 SP
Time counter Remaining tape length To check the remaining tape length of a tape, set Tape select in the ADVANCED OPTIONS menu correctly (page 69). 46 Recording TV programs To watch another TV program while recording 1 Press TV/VIDEO to turn off the VIDEO indicator in the display window. 2 If your TV is connected to the VCR using A/V connections, set the TV to the 3 Select another channel on the TV. TVs antenna input; if not, skip this step. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape. Safety tab Tips
To select a channel, you can use the number buttons on the remote commander. Enter the channel number, then press ENTER.
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT SELECT button.
The display appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. If you do not want to watch TV while recording, you can turn off the TV. When using a cable box, make sure to leave it on. Notes
The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-
30, or tapes recorded in the LP mode.
The display does not appear during still (pause) mode or slow-motion playback. It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. B a s i c O p e r a t i o n s Recording TV programs 47
Recording TV programs using the Dial Timer The Dial Timer function allows you to make timer recordings of programs without turning on your TV. Set the recording timer to record up to eight programs that will be broadcast within a month using the DIAL TIMER. The recording start time and recording stop time can be set at one minute intervals.
?/1 POWER CHANNEL +/
x STOP DIAL TIMER X PAUSE Before you start...
When using a cable box, turn it on.
Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. 1 DIAL TIMER Press DIAL TIMER. DATE and TODAY appear alternately in the display window. If the date and time are not set, DAY will appear. See step 2 in the following section To set the clock to set the date and time. 2 DIAL TIMER Turn DIAL TIMER to set the recording date. 48 Recording TV programs using the Dial Timer 3 4 5 DIAL TIMER Press DIAL TIMER to set the start time. START and Current time appear alternately in the display window. DIAL TIMER Turn DIAL TIMER to set the recording start time. You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the CHANNEL +/ buttons. CHANNEL DIAL TIMER Press DIAL TIMER to set the stop time. STOP or Start time appear alternately in the display window. B a s i c O p e r a t i o n s 6 DIAL TIMER Turn DIAL TIMER to set the recording stop time. You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the CHANNEL +/ buttons. CHANNEL Recording TV programs using the Dial Timer 49 continued 7 8 9 DIAL TIMER Press DIAL TIMER. CH and Current channel appear alternately in the display window. DIAL TIMER Turn DIAL TIMER to set the channel number. To record from a source connected to the LINE IN 1 or LINE-2 IN jacks, turn DIAL TIMER or press INPUT SELECT to display L1 or L2. INPUT SELECT DIAL TIMER Press DIAL TIMER to complete the setting. OK appears in the display window for about five seconds. The TIMER indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. To return to the previous step To return to the previous step, press the CHANNEL + and buttons on the VCR at the same time during any of the Dial Timer settings. To stop recording To stop the VCR while recording, press x STOP. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The TIMER indicator disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording:
Reset the counter (page 44).
Display tape information on the TV screen (page 46).
Check the timer settings (page 63).
Watch another TV program (page 47). 50 Recording TV programs using the Dial Timer To set the clock 1 Hold down DIAL TIMER so that DAY and 1 appear alternately in the display window. However, if the clock has already been set, the current setting appears. 2 Turn DIAL TIMER to set the day. 3 Press DIAL TIMER. 4 Turn and press DIAL TIMER to set the month and then the year. MONTH and 1 appear alternately in the display window. After you set the year, CLOCK and 0 appear alternately in the display window. 5 Turn and press DIAL TIMER to set the hour and minute. 6 When you have finished setting the time, press DIAL TIMER to start the clock. B a s i c O p e r a t i o n s Tips
To cancel a Dial Timer setting, press x STOP on the VCR while you are making the setting.
The program is recorded in the current tape speed. To change the tape speed, press SP/EP before you complete the setting in step 9 (page 50).
To check, change, or cancel the program setting, see Checking/changing/canceling timer settings on page 63. Notes If eight programs have already been set using the VCR Plus+ C 3 system or the manual timer setting, FULL appears in the display window for about five seconds. If you set the clock using the Auto Clock Set feature, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set Auto Clock Set correctly. If you are setting the clock for the first time or 0: appears in the display window, you cannot set the clock to February 29th using the Dial Timer. Please use the Auto Clock Set feature to set the VCR to this day.
The TIMER indicator flashes in the display window when you complete the setting in step 9 on page 50 with no tape inserted.
When the setting time is incorrect, ERROR appears in the display window in step 9. Set the timer again from step 1.
You cannot set the tape speed to AUTO using the DIAL TIMER. To select AUTO, set the SPD position in Timer set/check. Recording TV programs using the Dial Timer 51 continued
About the Demonstration Mode The Dial Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the FULL notice which appears if eight programs have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X PAUSE on the VCR while turning the DIAL TIMER. DEMO appears in the display window for a few seconds. To cancel the Demonstration Mode Turn the power off and unplug the AC power cord. Although the Demonstration Mode is canceled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Dial Timer or any other timer method after reconnecting the AC power cord (page 63). 52 Recording TV programs using the Dial Timer Recording TV programs using the VCR Plus+ C3 system Just enter the PlusCode number listed in the TV program guide. The date, time and channel number of that program are set automatically. You can preset up to eight programs together with the DIAL TIMER and manual timer settings at one time. Before you start
Check that the VCR clock is set to the correct time.
Turn on the VCR and the TV and set it to the video channel. When using a cable box, turn it on.
Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. 3 6 9 1 4 7 2 5 8 0
?/1 VCR Plus+
Number buttons MENU M/m/</, OK x STOP B a s i c O p e r a t i o n s 1 VCR Plus+
Press the VCR Plus+ button. VCR Plus+
Enter code with [0~9]
Mode Speed V
[ONCE]
[AUTO]
Select End
Vv OK Quit
: MENU Recording TV programs using the VCR Plus+ C3 system 53 continued 2 3 4 5 6 7 Press M/m to move the cursor (B) to Enter code. PLAY OK 3 6 9 1 4 7 2 5 8 0 Press the number buttons to enter the PlusCode number. If you make a mistake, press < and re-
enter the correct number. VCR Plus+
Enter code with [0~9]
Mode Speed V
[ONCE]
[AUTO]
Select End
Vv OK Quit
: MENU PLAY OK PLAY OK PLAY OK PLAY OK PLAY OK Press M/m to move the cursor (B) to Mode. Press </, to select ONCE, MO~FR, or WEEKLY:
To record Only once Select ONCE Everyday Monday to Friday MO~FR Once a week WEEKLY Press M/m to move the cursor (B) to Speed. VCR Plus+
Enter code with [0~9]
Mode Speed
[ONCE]
[AUTO]
Select End
Vv OK Set Quit
: Bb
: MENU Press </, to select the tape speed, AUTO, SP, or EP. VCR Plus+
Enter code with [0~9]
Mode Speed
[ONCE]
[AUTO]
Select End
Vv OK Set Quit
: Bb
: MENU 54 Recording TV programs using the VCR Plus+ C3 system PLAY OK MENU 8 9 10 Press OK to confirm the setting. To enter another setting, repeat steps 1 to 7. Press MENU to exit the menu. Press ?/1 to turn off the VCR. The TIMER indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. B a s i c O p e r a t i o n s To stop recording To stop the VCR while recording, press x STOP. To use the Auto Tape Speed function When you are recording a program in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the EP mode. Note that some noise will appear on the picture when the tape speed is changed. If you want to keep the tape speed, select SP. To operate this function, set Tape select in the ADVANCED OPTIONS menu correctly (page 69). To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The TIMER indicator disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording:
Reset the counter (page 44).
Display tape information on the TV screen (page 46).
Check the timer settings (page 63).
Watch another TV program (page 47). Tip
To check, change or cancel the program setting, see Checking/changing/canceling timer settings on page 63. Note If the VCR does not accept the PlusCode number, this means that:
The PlusCode number is incorrect. ONCE, MO~FR, or WEEKLY was selected incorrectly. You cannot select MO~FR or WEEKLY for a program that airs more than seven days ahead. Correctly set the PlusCode number again from step 2. Recording TV programs using the VCR Plus+ C3 system 55
Setting the timer manually If the VCR Plus+ C3 system is not available in your area, follow the instructions below to set the timer to record programs. You can preset up to eight programs together with the DIAL TIMER and the VCR Plus+ C3 system at one time. Before you start
Check that the VCR clock is set to the correct time.
Turn on the VCR and the TV and set it to the video channel. When using a cable box, turn it on.
Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. 3 6 9 1 4 7 2 5 8 0
?/1 CH +/
INPUT SELECT MENU M/m/</, OK x STOP 1 MENU Press MENU. 56 Setting the timer manually MAIN MENU Timer set / check Clock set Tuner preset Cable Box Control Advanced options Language / Idioma / Langue Select Set
Vv OK Quit
: MENU 2 3 4 5 6 7 Press M/m to move the cursor (B) to Timer set/check, then press OK. CH START STOP
Bb OK
Select End DATE SPD
Set Quit
: Vv
MENU If necessary, press M/m to move the cursor (B) to the row that is to be set. Set the channel number, start and stop time, date, and tape speed:
1 Press , to flash each item in turn. 2 Press M/m to set each item. PM PM CH START STOP 9 : 0 0 3 5 8 : 0 0
Bb OK
Select End DATE SPD 9 / 3 0 SP
Set Quit
: Vv
MENU To correct a setting, press < to return to that setting and reset. To record from a source connected to the LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or M/m to display L1 or L2 in the CH position. To record the same program every day or the same day every week, press m while the date is flashing. For details, see Daily/weekly recording below. To use the Auto Tape Speed function, press m to display AUTO in the SPD position. For details, see To use the Auto Tape Speed function on page 55. Press OK to confirm the setting. To enter another setting, press M/m to select the next row and repeat step 4. B a s i c O p e r a t i o n s PLAY OK PLAY OK PLAY OK INPUT SELECT PLAY OK MENU Press MENU to exit the menu. Press ?/1 to turn off the VCR. The TIMER indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. To stop recording To stop the VCR while recording, press x STOP. continued Setting the timer manually 57 Daily/weekly recording In step 4 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Press M to change the indication in reverse order. MO~FR t SUNS t MONS t ..... t SATS t 1 month later t (dates count down) t the current date To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The TIMER indicator disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording:
Reset the counter (page 44).
Display tape information on the TV screen (page 46).
Check the timer settings (page 63).
Watch another TV program (page 47). Tips
To set the channel, you can also use the number buttons. indicator appears, the timer settings overlap. To check, change or cancel the program If the setting, see Checking/changing/canceling timer settings on page 63. If the indicator appears, this means that the VCR is currently recording this program.
When you are recording a program in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the EP mode. Note that some noise will appear on the picture when the tape speed is changed. If you want to keep the tape speed, set Tape select to SP in the ADVANCED OPTIONS menu (page 69). 58 Setting the timer manually
Locking the VCR (Child Lock) After you have set the timer, you can lock all of the buttons on the VCR so that the settings are not canceled by mistake.
?/1 POWER x STOP To lock the VCR When the VCR is turned on, hold down ?/1 POWER on the VCR until LOC appears in the display window. The VCR turns off and the TIMER indicator remains lit if there is a timer setting. The VCR will not work except for timer recordings. To unlock the VCR Hold down ?/1 POWER on the VCR until LOC disappears from the display window. The VCR is unlocked and turns on. To stop timer recording while the VCR is locked, press x STOP. The recording stops and the VCR is unlocked. Note
The VCR will be unlocked when:
You stop timer recording by pressing x STOP. You insert a tape. The AC power cord is disconnected or power supply stops. B a s i c O p e r a t i o n s Locking the VCR (Child Lock) 59 Additional Operations Playing/searching at various speeds TRACKING +/
x2 y SLOW H PLAY M FF m REW Playback options Operation View the picture during fast-
forward or rewind During fast-forward, hold down M FF. During rewind, hold down m REW. Play at high speed
During playback, briefly press M FF or m REW. The tape continues to play at high speed.
During playback, hold down M FF or m REW. When you release the button, normal playback resumes. Play at twice the normal speed During playback, press 2. Play in slow motion Play frame by frame During playback or pause, press y SLOW. During pause, press M FF on the remote commander. To resume normal playback Press H PLAY. Using the shuttle ring With the shuttle ring, you can operate a variety of playback options. There are two ways for using the shuttle ring, normal mode and jog mode. 60 Playing/searching at various speeds Shuttle ring JOG To use the shuttle ring in normal mode During playback or pause, turn the shuttle ring clockwise or anticlockwise. Each change in the shuttle ring position changes the playback mode in the following way. Pause Slow motion in reverse Slow motion Normal speed in reverse Normal speed
(Initial speed) Double speed in reverse High speed in reverse Double speed High speed To use the shuttle ring in jog mode Use this mode for frame-by-frame playback. Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog mode during any playback mode, playback pauses so you can see a still picture. Each change in the shuttle ring position shifts the picture one frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the speed you turn the shuttle ring. To resume normal mode, press JOG again. The JOG button turns off. Tips
Adjust the picture using the TRACKING +/ buttons if:
Streaks appear while playing in slow motion. The picture shakes during pause.
The VCR turns on and starts playback automatically by pressing H PLAY on the VCR with the VCR power turned off. Notes
The sound is muted during these operations.
Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed.
The picture may show noise when playing at high speed in reverse. A d d i t i o n a l O p e r a t i o n s Playing/searching at various speeds 61 Quick Timer Recording After you have started recording, you can have the VCR stop recording automatically after a specified duration. z REC 1 While recording, press z REC. The c indicator appears in the display window. 2 Press z REC repeatedly to set the duration time. Each press advances the time in increments of 30 minutes. 0:30 1:00 3:30 4:00 Normal recording The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the c indicator disappears and the VCR returns to normal recording mode. To stop while recording Press x STOP. Note
You cannot display the current tape time in the display window when setting the recording duration time. 62 Quick Timer Recording Checking/changing/canceling timer settings Before you start
Turn on the TV and set it to the video channel.
?/1 CLEAR 3 6 9 1 4 7 2 5 8 0 A d d i t i o n a l O p e r a t i o n s MENU M/m/</, OK 1 Press ?/1 to turn on the VCR. 2 Press MENU. Checking/changing/canceling timer settings 63 continued 3 Press M/m to move the cursor (B) to Timer set/check, then press OK.
If you want to change a setting, go on to the next step.
If you do not need to change the settings, press MENU, then turn off the VCR to return to recording standby. 4 Press M/m to move the cursor (B) to the setting you want to change or cancel.
To change the setting, press </, to flash the item you want to change, and press M/m to change it.
To cancel the setting, press CLEAR. PM AM PM PM AM PM CH START STOP 9 : 0 0 3 5 8 : 0 0 2 0 10 : 0 0 11 : 3 0 10 : 0 0 6 0 8 : 3 0
Bb OK
Select End DATE SPD 9 / 3 0 SP EP 10 / 0 2 0 AUTO 9 / 3
Set Quit
: Vv
MENU 5 Press OK to confirm the setting. 6 Press MENU to exit the menu. If any timer settings remain, turn off the VCR to return to recording standby. When the timer settings overlap The program that starts first has priority and the second program starts recording only after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority. Program 1 Program 2 Will be cut off 64 Checking/changing/canceling timer settings Recording stereo and bilingual programs Recording stereo programs When you receive a program broadcast in stereo, press AUDIO MONITOR to display STEREO on the TV screen. You can also select LEFT, RIGHT, or MONO. If there is noise in the stereo program, select MONO. The sound will be recorded in monaural (on both hi-fi and normal audio tracks) but with less noise. Recording bilingual programs Press AUDIO MONITOR to display SAP on the TV screen. When a SAP (Second Audio Program) is received, SAP appears on the TV screen and the SAP indicator lights up. When MAIN is selected, the VCR records only the main sound. Selecting the sound during playback During playback, press AUDIO MONITOR to select the sound you want. To listen to Stereo Left channel Right channel Monaural sound on the normal audio track On-screen display Display window HI-FI LEFT RIGHT MONO Hi-Fi Hi-Fi Hi-Fi No indicator How sound is recorded on a video tape The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. A d d i t i o n a l O p e r a t i o n s Normal audio track Monaural sound Hi-fi audio track
(main track) Stereo sound
(left/right channels) Notes
To play a tape in stereo, you must use the A/V connections.
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the AUDIO MONITOR setting. Recording stereo and bilingual programs 65 Searching using various functions The VCR automatically marks the tape with an index signal at the point where each recording begins. You can easily find a specific point using various search functions. SEARCH M/m/</, H PLAY To search using the index function (Scan and Play) The VCR automatically marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. 1 Insert an indexed tape into the VCR. 2 Press SEARCH. Scan and play:
Press
B ]
or
[ b ]
Go to
0 0 0:
0 0:
Press
[ V ]
End search:
Press
[ v ]
0 0 1 3 0 SP
3 Press , to scan ahead, or < to scan backwards. The VCR searches and then plays back for about five seconds. Scan and play 0 0 1 3 0 SP
4 Press H PLAY to view that program. If you do not press H PLAY, the VCR automatically searches for the next index mark, or until it reaches the end of the tape. 66 Searching using various functions To search for the counter 0:00:00 point To mark a point on the tape that you want to find later, reset the tape counter to 0:00:00. The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape counter. 1 Press SEARCH. 2 Press M. The VCR starts searching and automatically stops at the 0:00:00 point. Go to [
0 0 0:
0 0:
0 0 1 3 0 SP
To search for a blank portion of the tape The VCR automatically searches for the beginning of a blank portion. You can easily find a point you can start recording from. 1 Press SEARCH. 2 Press m. The VCR starts searching and automatically stops at the beginning of a blank space. If no blank space is found, the VCR reaches the end and the tape will stop. End search 0 0 1 3 0 SP
A d d i t i o n a l O p e r a t i o n s Note
Once in recording mode, if the VCR is put in pause and then released to start the recording, no index mark will be inserted. An index mark will be inserted if the channel is changed while VCR is put in pause. Searching using various functions 67 Adjusting the picture (tracking) Although the VCR automatically adjusts the tracking when playing a tape, distortion may occur if the recording is in poor condition. In this case, manually adjust the tracking. Press TRACKING +/ on the VCR to display the tracking meter. The distortion should disappear as you press one of the two tracking buttons. To resume automatic tracking adjustment, eject the tape and reinsert it. TRACKING Tracking meter Note
The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP mode on other VCRs. 68 Adjusting the picture (tracking) Changing menu options 1 Press MENU. 2 Press M/m to move the cursor (B) to Advanced options, then press OK. ADVANCED OPTIONS Tape select:
Auto play:
Auto repeat:
Auto power off:
Power save:
VCR Output CH:
T1 2 0
ON OFF OFF OFF 3CH
Select End
Vv OK Set Quit
: Bb
: MENU A d d i t i o n a l O p e r a t i o n s 3 Press M/m to move the cursor (B) to the option to change. 4 Press </, to change the setting, then press OK. 5 Press MENU to exit the menu. Menu choices Initial settings are indicated in bold print. Menu option Set this option to Tape select
T-120 when using a T-120 or shorter length tape.
T-160 when using a T-160 length tape.
T-180 when using a T-180 or longer length tape. For details, see page 46. Auto play
ON to start playback automatically, when you insert a tape with its safety tab removed.
OFF to turn off Auto play. You need to press H PLAY to start playback, even if you insert a tape with its safety tab removed. Auto repeat
ON to play back a tape repeatedly. The VCR rewinds a tape to the beginning and restarts playback automatically.
OFF to turn off Auto repeat. Auto power off
1Hr to turn off the VCR automatically one hour after the last Power save VCR Output CH operation.
2Hr to turn off the VCR automatically two hours after the last operation.
OFF to set no specific time to turn off.
ON to turn off the indicators in the display window during standby mode to reduce the VCRs power consumption to a minimum.
OFF to turn on the indicators in the display window while the VCR is standing by.
3CH when using channel 3 to receive the VCR signal.
4CH when using channel 4 to receive the VCR signal. For details, see page 70. continued Changing menu options 69 Setting the RF Output channel When connecting the VCR to the TV using only the antenna cable, you must set the VCR Output CH in the ADVANCED OPTIONS menu so that the TV can receive the correct signal from the VCR. TV
?/1 CHANNEL +/
?/1 TV/VIDEO CH +/
3 6 9 1 4 7 2 5 8 0 1 Set the VCR Output CH to 3CH or 4CH (see page 69 to set the channel), whichever channel is not used in your area. If both are used, set the VCR Output CH to either channel. 2 Press ?/1 to turn on the VCR. 3 Press TV/VIDEO to turn on the VCR indicator in the VCRs display window. 4 Press CH +/ to display a channel number in the display window. 5 Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH). Select an active channel number in your area. The channel you selected in step 4 appears on the TV screen. If the channels change when you press CH +/, you have made the correct setting. Whenever you use the VCR, set the TV to the channel selected in step 1. 70 Changing menu options Editing with another VCR How to connect to record on this VCR This VCR (Recorder) TV LINE-2 IN Other VCR (Player) LINE OUT Audio/video cable (not supplied)
: Signal flow Notes
Make sure you connect the plugs to jacks of the same color. If the other VCR is a monaural type and connected to this VCRs LINE-2 IN jacks, connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right channel. If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise.
You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound is recorded only on the channel whose jack is connected to the audio plug. To record on both right and left channels, connect the audio plugs to the AUDIO R/L jacks using an audio/video cable (not supplied). A d d i t i o n a l O p e r a t i o n s continued Editing with another VCR 71
Operation (when recording on this VCR) Before you start editing
Turn on the VCR and the TV and set X PAUSE it to the video channel.
Press INPUT SELECT or CHANNEL +/ to display L1 or L2 in the display window.
Press SP/EP to select the tape speed, SP or EP. z REC and press X PAUSE. Search for the point to start playback and set it to playback pause. 1 Insert a source tape with its safety tab removed into the other (playback) VCR. 2 Insert a tape into this (recording) VCR. Search for the point to start recording 3 Press z REC on this VCR to set it to recording pause. 4 To start editing, press the X PAUSE buttons on both VCRs at the same time. To stop editing Press the x STOP buttons on both VCRs. Tip
To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted scene begins. When it ends, press X PAUSE again to resume recording. 72 Editing with another VCR Additional Information Antenna information Attaching the external antenna connector When using a 300-ohm twin lead cable for a VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable Antenna connector (not supplied) 1 Loosen the screws on the antenna connector. 2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws. Attaching a UHF/VHF band mixer When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use a UHF/VHF band separator/
mixer (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable UHF/VHF band separator/
mixer (not supplied) 75-ohm coaxial cable 1 Loosen the screws on the mixer. 2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws. 4 Connect the 75-ohm coaxial cable to the mixer. 73 Antenna information Troubleshooting If you have any questions or problems not covered below, please consult your nearest Sony dealer. Symptom The ?/1 switch does not function. r e w o P The power is turned on but the VCR does not operate. k The clock has stopped and --:--
c o C appears in the display window. l Remedy
Connect the AC power cord securely.
Make sure the VCR is not locked. To unlock, hold down
?/1 POWER on the VCR until LOC disappears.
Moisture condensation has occurred. Turn the power off, unplug the AC power cord and leave the VCR to dry for over three hours.
The clock stops if the VCR is disconnected from the wall outlet for more than one minute. Reset the clock (and timer). The playback picture does not appear on the TV screen.
Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. The picture is not clear. The picture rolls vertically during picture search.
Adjust the tracking with the TRACKING +/ buttons.
The video heads are dirty (see the last page of Troubleshooting). Clean the video heads using a Sony video head cleaning cassette. If a Sony cleaning cassette is not available in your area, have the heads cleaned at your nearest Sony dealer (a standard service fee will be charged). Do not use a commercially available liquid type cleaning cassette, as it may damage the video heads.
The video heads may have to be replaced. Consult your local Sony dealer for more information.
Adjust the vertical hold control on the TV or monitor. The picture has no sound.
The tape is defective. If you made A/V connections, check the audio cable connection. A TV program does not appear on the TV screen.
Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input.
Select the correct source with the INPUT SELECT or CH +/ buttons. Select a channel number when recording TV programs; select L1 or L2 when recording from other equipment. TV reception is poor.
Adjust the TV antenna. The tape starts playing as soon as it is inserted. The tape is ejected when you press z REC. Nothing happens when you press z REC.
The safety tab has been removed. To record on this tape, cover the tab hole.
Check that the safety tab has not been removed.
Make sure the tape is not at its end. k c a b y a P l i g n d r o c e R 74 Troubleshooting
Symptom Remedy The timer does not operate.
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a program has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the cable box is turned on.
The clock stops if the VCR is disconnected from the wall outlet for more than one minute. Reset the clock and timer.
When you use the cable box control feature, make sure the Cable Box Use Control option is set to ON.
Turn the power off and unplug the AC power cord. i g n d r o c e r r e m T i A tape cannot be inserted.
Check that a tape is not already in the tape compartment. The remote commander does not function.
Make sure you are pointing the remote commander at the remote sensor on the VCR. s r e h t O The channels on the VCR cannot be changed. The tracking meter does not appear on the screen. You cannot control other TVs. The VCR needs to be cleaned.
Replace all the batteries in the remote commander with new ones if they are weak.
Make sure the TV / VIDEO switch is set correctly. If you are not using Control S, make sure that both miniplugs are disconnected.
Make sure the Cable Box Control option is set to OFF.
The recording condition of the tape is very poor and tracking cannot be adjusted.
Set your TVs code number. The code number may change when you replace the batteries of the remote commander.
Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. A d d i t i o n a l I n f o r m a t i o n Symptoms caused by contaminated video heads
Normal picture
Rough picture
Unclear picture
No picture (or black & white screen appears) initial contamination terminal Troubleshooting 75
Timer section Clock Quartz locked Timer indication 12-hour cycle Timer setting 8 programs (max.) General Power requirements 120 V AC, 60 Hz Power consumption 16 W Operating temperature 0C to 45C (32F to 113F) Storage temperature 20C to 60C (4F to 140F) Dimensions including projecting parts and controls
(w/h/d) Approx. 430 96 259 mm
(Approx. 17 3 10 7 1 8 4 inches) Mass Approx. 2.8 kg (Approx. 6 lb 3 oz) Supplied accessories Remote commander (1) Size AA (R6) batteries (2) 75-ohm coaxial cable with F-type connectors (1) Design and specifications are subject to change without notice. ENERGY STAR is a U.S. registered mark. As an ENERGY STAR Partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Specifications System Format VHS NTSC standard Video recording system Rotary head helical scanning FM system Video heads Double azimuth four heads Video signal NTSC color, EIA standards Tape speed SP: 33.35 mm/s (1 7 EP: 11.12 mm/s (
LP: 16.67 mm/s (
playback only 11 3 inches/s) 8 inches/s) inches/s), 16 16 Maximum recording/playback time 8 hrs. in EP mode (with T-160 tape) Rewind time Approx. 1 min (with T-120 tape) Tuner section Channel coverage VHF 2 to 13 UHF 14 to 69 CATV A-8 to A-1, A to W, W+1 to W+84 Antenna 75-ohm antenna terminal for VHF/UHF Inputs and outputs LINE IN 1 and LINE-2 IN VIDEO IN, phono jack (1 each) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jacks (2 each) Input level: 327 mVrms Input impedance: more than 47 kilohms LINE OUT VIDEO OUT, phono jack (1) Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO OUT, phono jacks (2) Standard output: 327 mVrms Load impedance: 47 kilohms Output impedance: less than 10 kilohms 76 Specifications Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel A ?/1 POWER switch (55) (57) J z REC (record) button (46) (62) (72) B Remote sensor (7) C Tape compartment D A EJECT button (43) E m REW (rewind) button (43) (60) F H PLAY button* (43) G M FF (fast-forward) button (43) (60) H JOG button (60) I Shuttle ring (60) K x STOP button* (43) (72) L X PAUSE button (43) (72) M CHANNEL/TRACKING +/ buttons*
(46) (68) N DIAL TIMER* (48) O LINE-2 IN VIDEO/AUDIO L/R jacks
(71)
*1 The H PLAY, CHANNEL + and x STOP buttons have a tactile dot. A d d i t i o n a l I n f o r m a t i o n continued Index to parts and controls 77 Display window A TIMER indicator (55) (57) B LP indicator (46) C Tape indicator (46) D VIDEO indicator (47) (70) E Time counter/clock/line/channel indicator (44) (46) (72) F SAP indicator (65) G Hi-Fi indicator (65) H SP/EP indicator (46) 78 Index to parts and controls Rear panel A AC power cord (10) (15) (17) D RF IN (FROM ANT.) connector (14) B LINE OUT AUDIO R/AUDIO L/VIDEO
(16) (18) jacks (12) E RF OUT (TO TV) connector (14) (16) C LINE IN 1 AUDIO R/AUDIO L/VIDEO
(18) jacks (71) F CONTROL S IN jack A d d i t i o n a l I n f o r m a t i o n continued Index to parts and controls 79 Remote commander 3 6 9 1 4 7 2 5 8 0 A TV / VIDEO switch (7) B Z EJECT button (43) C TV/VIDEO button (8) (47) D CLEAR button (44) (64) E DISPLAY button (46) F SP (Standard Play)/EP (Extended Play) button (46) G INPUT SELECT button (47) (72) H z REC (record) button (46) (62) I y SLOW button (60) J MENU button (23) (56) (63) (69) K X PAUSE/M button (23) (43) x STOP/m button (23) (43) m REW (rewind)/ < button (43) (60) M FF (fast-forward)/ , button (43)
(60) H PLAY/OK button* (23) (43) (54)
* The H PLAY button has a tactile dot. 80 Index to parts and controls 3 6 9 1 4 7 2 5 8 0 L ?/1 (power) switch (8) (55) (57) M COUNTER/REMAIN button (46) N AUDIO MONITOR button* (65) O VCR Plus+ button* (53) P Number buttons* (47) (54) Q ENTER button (47) R CH (channel) +/ buttons* (8) (46) S VOL (volume) +/ buttons (8) T SEARCH button (66) U REPLAY button (43) V 2 button (60) W COMMERCIAL SKIP button (43)
* The AUDIO MONITOR, number 5 and CH +
buttons have a tactile dot. A d d i t i o n a l I n f o r m a t i o n Index to parts and controls 81 Index A Adjusting picture 68 tracking 68 Advanced option 69 Antenna hookup 14 Audio track 65 Audio/video (A/V) hookup 12 Auto Clock Set 24 Auto Tape Speed 55 C Cable hookup 10 Channel line-up chart 39 Child Lock 59 Cleaning the video heads 74 Clock setting 24 Commercial Skip 43 Connecting Cable TV 18, 19, 21 external antenna connector 73 UHF/VHF band mixer 73 Counter 44 D Demonstration Mode 52 Dial Timer 48 Disabling channels 31 Dubbing. see Editing E Editing 71 EP mode 46 H Hi-fi audio track 65 L Language selecting 23 Locking the VCR 59 LP mode 47 M Monaural 65 Monitoring audio during playback 65 N Normal audio track 65 P Picture adjustment 68 Playback 42 at various speeds 60 frame by frame 60 selecting the sound 65 skip 43 slow motion 60 Presetting channels 29 R Recording 45 bilingual programs 65 SAP broadcasts 65 saving 47 stereo broadcasts 65 timer setting 56 using Dial Timer 48 using the VCR Plus+
system 53 while watching another program 47 RF channel 70 S Safety tab 47 SAP (Second Audio Program) 65 Searching at various speeds 60 for a blank portion 67 for the counter 0 point 67 Scan and Play 66 SP mode 46 Stereo 65 T Timer setting 56 canceling 63 changing 63 checking 63 daily/weekly recording 58 using the VCR Plus+
system 53 Tracking adjustment. see Adjusting Tuner presetting 29 V VCR Plus+ system channel set up 39 recording 53 82 Index Quick reference to using the VCR Hookup 4 To play a tape 1 Set the TV to channel 3 or 4
(or to video input, if you made A/V connections). 2 Insert a tape and pressH PLAY. To record a program 1 Turn on the cable box. 2 Press VCR Plus+ on the remote commander. 3 Enter the PlusCode number. 4 Select ONCE, DAILY, or WEEKLY, then press ENTER. 5 Insert a tape. 6 Press ?/1 to turn off the VCR. 7 Leave the cable box on.\
To watch TV 1 Turn off the VCR, or press the VCRs TV/VIDEO button until the VIDEO indicator in the display window turns off. 2 Turn on your cable box on. 3 Set the TV to the cable box output channel (usually 2, 3, or 4). 4 Set the cable box to the channel you want to watch. Hookup 1 To play a tape 1 Set the TV to channel 3 or 4
(or to video input, if you made A/V connections). 2 Insert a tape and press H PLAY. If there is no picture on your TV, press the VCRs TV/VIDEO button until the VIDEO indicator appears in the display window. To record a program 1 Press MENU and select Timer set/check. 2 Set the channel, time, date, and tape speed. 3 Press OK. 4 Insert a tape. 5 Press ?/1 to turn off the VCR. To watch TV 1 Turn off the VCR, or press the VCRs TV/VIDEO button until the VIDEO indicator in the display window turns off. 2 Set the TV to the channel you want to watch. Hookup 2 To play a tape 1 If you made A/V connections, set the TV to video input. If you did not use A/V hookup:
Turn on the cable box.
Set the cable box to channel 3 or 4.
Set the TV to the output channel of the cable box
(usually 2, 3, or 4). 2 Insert a tape and press H PLAY. To record a program 1 Press MENU and select Timer set/check. 2 Set the channel, time, date, and tape speed. 3 Press OK. 4 Insert a tape. 5 Press ?/1 to turn off the VCR. To watch TV 1 Turn off your VCR, or press the VCRs TV/VIDEO button until the VIDEO indicator in the display window turns off. 2 Select the channel with your cable box (if you have one) or with your TV. Hookup 3 To play a tape 1 Set the TV to channel 3 or 4
(or to video input, if you made A/V connections). 2 Insert a tape and press H PLAY. To record a program 1 Turn on the cable box. 2 Set the cable box to the channel you want to record. 3 Press MENU and select Timer set/check. 4 Set the channel, time, date, and tape speed. 5 Press OK. 6 Insert a tape. 7 Press ?/1 to turn off the VCR. Leave the cable box on. To watch TV 1 Turn off your VCR, or press the VCRs TV/ VIDEO button until the VIDEO indicator in the display window turns off. 2 Turn on your cable box. 3 Set the TV to the cable box output channel (usually 2, 3, or 4). 4 Set the cable box to the channel you want to watch. Sony Corporation Printed in China AC68-01653A
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-12-13 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | Class II permissive change or modification of presently authorized equipment |
2 | 2002-12-11 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2002-12-13
|
||||
1 2 |
2002-12-11
|
|||||
1 2 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0027908797
|
||||
1 2 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 2 |
Pine Brook, New Jersey 07058
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
A3L
|
||||
1 2 | Equipment Product Code |
KHANVFD
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J**** C********
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
973-8********
|
||||
1 2 | Fax Number |
973-8********
|
||||
1 2 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 2 | Name |
R**** O******
|
||||
1 2 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 |
Columbia, Maryland 21045
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
410-2********
|
||||
1 2 | Fax Number |
410-2********
|
||||
1 2 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | HID - Part 15 TV Interface Device | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Cassette Recorder | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Class II Permissive Change: Alternate use of Tuner (Sanyo) | ||||
1 2 | Tuner: Alps TMZH2 | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SAMSUNG ELECTRONICS CO., LTD.
|
||||
1 2 | Name |
N**** P******
|
||||
1 2 | Telephone Number |
82-31********
|
||||
1 2 | Fax Number |
82-31********
|
||||
1 2 |
n******@samsung.co..kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CE | 61.25 | 65.75 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15B | 67.25 | 71.75 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | 61.25 | 65.75 | |||||||||||||||||||||||||||||||||||||
2 | 2 | 15B | 67.25 | 71.75 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC