SWL-2900U DatasheetUser Guide SWL-2900U User Guide REV 0.9 Samsung Electro-Mechanics 2007-12-26 Summary This document describes the general User-Guide of SWL-2900U IEEE 802.11b/g Wireless LAN USB 2.0 module. 2007 Samsung Electro-Mechanics. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. This document is subject to change without notice No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro-Mechanics. REV .9 Samsung Electro-Mechanics Proprietary 1/12 Revision History Revision Date 0.9 2007-12-26 Descriptions Created SWL-2900U Datasheet REV 0.9 Samsung Electro-Mechanics Proprietary 2/12 SWL-2900U Datasheet Table of Contents REVISION HISTORY .................................................................................................................. 2 1 GENERAL DESCRIPTION..................................................................................................... 4 1.1 FUNCTIONAL DESCRIPTION..........................................................................................................4 1.2 FEATURES ...............................................................................................................................4 1.3 APPLICATIONS..........................................................................................................................5 1.4 BLOCK DIAGRAM.......................................................................................................................5 1.5 DIMENSION AND PIN ASSIGNMENTS...............................................................................................6 2 PRIORITY MANAGEMENT................................................................................................... 8 2.1 MAXIMUM POWER SUPPLY RATING ................................................................................................8 2.2 CONNECTION TO HOST .............................................................................................................8 2.3 GROUND CONNECTION ...............................................................................................................8 2.4 STORAGE CONDITION ................................................................................................................8 2.5 CON2 PAD DISCOLORATION........................................................................................................8 3 ELECTRICAL CHARACTERISTICS........................................................................................ 9 3.1 ABSOLUTE MAXIMUM RATINGS .....................................................................................................9 3.2 CURRENT CONSUMPTION ............................................................................................................9 4 RF SPECIFICATION .......................................................................................................... 10 4.1 SUPPORTABLE MODULATION SCHEME & DATA RATES .......................................................................10 4.2 11B RF SPECIFICATION............................................................................................................10 4.3 11G RF SPECIFICATION............................................................................................................11 4.4 CHANNEL & CENTER FREQUENCY ................................................................................................11 4.5 ANTENNA SPECIFICATIONS......................................................................................................12 REV 0.9 Samsung Electro-Mechanics Proprietary 3/12 1 General Description 1.1 Functional Description SWL-2900U Datasheet SWL-2900U is the low power USB 2.0 module for 802.11b/g wireless LAN (WLAN) aimed at embedded applications. SWL-2900U is the USB 2.0 module that adopts a single-chip wireless local area network
(WLAN) medium-access controller (MAC) spread-spectrum baseband processor and 2.4 GHz RF radio. SWL-2900U supports IEEE 802.11b, and 802.11g standards. Data rates up to 54 Mbps can be provided in 802.11g mode of operation. The main IC of SWL-2900U includes an 80MHz ARM7 core, 384 KB of on-chip SRAM, and 80 KB of on-
chip ROM. SWL-2900U is able to host the entire WLAN driver and TCP/IP stack on-chip. This minimizes development time, cost, and burden on the host processor resources making SWL-2900U an ideal WLAN solution for nomadic application. SWL-2900U provides crucial power management functionality and requires only a single 5.0 V supply voltage. Figure 1-1 SWL-2900U Picture 1.2 Features
Wi-Fi compliant
Security: WEP, WPA-PSK, WPA2-PSK, WMM, WMM-PS, TKIP, and AES hardware acceleration
Host interface: USB 2.0
Low power consumption
Single 5.0 V external supply voltage required REV 0.9 Samsung Electro-Mechanics Proprietary 4/12 SWL-2900U Datasheet 1.3 Applications
Network printer servers with WLAN connectivity
Set-top boxes that need WLAN connectivity 1.4 Block Diagram 3.3V 2.5V Power Mngr 5V 3.3V LDO 5V B S U TCXO SEEPROM REV 0.9 2.5V 1.2V RX/TX ANT_SEL BCM4326 Balun SPDT SPDT Ant 1 MAC/PHY BB/RF DC-DC/LDO Balun PA RX/TX ANT_SEL Ant 2 Figure 1-2 SWL-2900U Block Diagram Samsung Electro-Mechanics Proprietary 5/12 SWL-2900U Datasheet 1.5 Dimension and Pin Assignments 1.5.1 Mechanical Dimension W X L X H = 45mm X 65mm X 5.1mm 65mm 45mm Figure 1-1 SWL-2900U Mechanical Dimension Figure 1-2 SWL-2900U REV 0.9 Samsung Electro-Mechanics Proprietary 6/12 SWL-2900U Datasheet 1.5.2 HOST Interface USB Interface : Molex 53261-0671, 6pin, Right Angle, SMT
* SIZE : 5.2 x 12.65 x 3.4 mm Figure 1-3 SWL-2900U CON1 Connector PIN Assignment Table 1-1 CON1 PIN Description No. Pin Name 1 2 3 4 5 6 Shell VBUS D-
D+
GND Shell Description Drain wire, to GND RED, 5V from HOST White, USB data Negative Green, USB data Positive Black, signal ground Drain wire, to GND REV 0.9 Samsung Electro-Mechanics Proprietary 7/12 2 Priority Management SWL-2900U Datasheet 2.1 Maximum Power Supply Rating The supply Voltage of SWL-2900U is 5V , do follow the Maximum Rating in 3.1. 2.2 Connection to HOST SWL-2900U will work properly only if connecting to USB2.0 Interface as defined at 1.5.2 . 2.3 Ground Connection SWL-2900U does not need special ground, but uses the ground wire in HOST Interface. 2.4 Storage Condition It needs proper condition for protecting the rust.
- Temperature : 0 ~ +50 C
- Humidity : lower level recommended , 25% ~ 65%RH
- Max Storage Limit : Within 6 Month from Production 2.5 CON2 Pad Discoloration The CON2 pad is open(not soldered) from the request of Customer, so USB Plug A type connector can be attached. But the pad can be discoloured from the exposure to air. The surface treatment type of SWL-2900U is OSP(Organic Solderability Preservative), so Scratching can make discoloration. It required the special care in handling. The Discoloured product is not inferior goods, if it works as WLAN adaptor.
- The discoloration Point : 2 points of CON2 Top Side & 6 points on Bottom Side REV 0.9 Samsung Electro-Mechanics Proprietary 8/12 3 Electrical Characteristics 3.1 Absolute Maximum Ratings SWL-2900U Datasheet Symbol Parameter Conditions Min. Nom. Max. Unit DC supply DC supply voltage from HOST DC for I/O USB2.0 Compliant ESD*
TS TO Electro-static discharge voltage IEC1000-4~2 POINT: CON1, CON12 AIR Contact Storage temperature Operating temperature
+4.85
+5.0
+5.25
-20 0
12K 8K
+85
+60 V
V V C C
* For more detail, see the Reliability Test Report. 3.2 Current Consumption Symbol Parameter Min. Nom. Max. Unit Current consumption *
Transmit current value 11b (Tx pwr: 17 dBm) 11g (Tx pwr: 13 dBm) 260 204
<500
<500 mA mA
* It can be different to test condition. REV 0.9 Samsung Electro-Mechanics Proprietary 9/12 SWL-2900U Datasheet 4 RF Specification All measurements are made under nominal power supply and room temperature 25 C unless specified. RF specification of SWL-2900U was defined according to 802.11b/g mandatory 4.1 Supportable Modulation Scheme & Data Rates Modulation Coding rate Data rates
(Mbps) BPSK BPSK QPSK QPSK 16-QAM 16-QAM 64-QAM 64-QAM DBPSK DQPSK CCK 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 NA NA NA NA 6 9 12 18 24 36 48 54 1 2 5.5 11 802.11g OFDM 802.11b
(20MHz Channel spacing Remark for OFDM) mandatory optional mandatory optional mandatory optional optional optional
4.2 11b RF Specification Data Rate
/ TRx 11Mbps/Tx Item Power Detect Gap IEEE 802.11b/g
11Mbps/Tx Power 18.4.7.1 11Mbps/Tx Frequency Error Rate 11Mbps/Tx EVM 11Mbps/Tx 11Mbps/Tx 11Mbps/Rx Spectrum Mask 1st Side Lobe Spectrum Mask 2nd Side Lobe Minimum input signal level 18.4.7.4 18.4.7.8 18.4.7.3 18.4.7.3 Min Nom Max Unit 15
-25
17 13 40 60 1.5 20
+25 35 30 50 dBm dBm ppm
dBr dBr 18.4.8.1
-85
-84
-76 dBm REV 0.9 Samsung Electro-Mechanics Proprietary 10/12 4.3 11g RF Specification Data Rate
/ TRx 48Mbps/Tx Item Power Detect Gap IEEE 802.11b/g
48Mbps/Tx Power 19.4.7.1 48Mbps/Tx Frequency Error Rate 48Mbps/Tx EVM 19.4.7.2 17.3.2.2 17.3.8~17.3.9 Spectrum Mask 1st Side Lobe Spectrum Mask 2nd Side Lobe Spectrum Mask 3rd Side Lobe Minimum input signal level 19.5.4 19.5.4 19.5.4 19.5.1 48Mbps/Tx 48Mbps/Tx 48Mbps/Tx 48Mbps/Rx 4.4 Channel & Center Frequency SWL-2900U Datasheet Min Nom Max Unit 10
-25
13 0
-27 40 60 60 1.5 15
+25
-22 20 28 40 dBm dBm ppm dB dBr dBr dBr
-76
-74
-65 dBm Channel No Center Frequency
[Mbps]
FCC, IC ETSI Korea 1 2 3 4 5 6 7 8 9 10 11 12 13 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 O O O O O O O O O O O
O O O O O O O O O O O O O REV 0.9 Samsung Electro-Mechanics Proprietary 11/12 4.5 ANTENNA Specifications 2 Fractal Antennas on PCB that support Diversity ANT1 ANT2 ANTENNA Polarization ANT1 ANT2 Horizontal Vertical Horizontal Vertical SWL-2900U Datasheet AVG
-3.3
-2.5
Max. Unit 2.6
1.8
dBi dBi dBi dBi All measurement is done with bare PCB. It can be different to ANTENNA direction & measurement set-up. A1 V H A2 For better performance, the antennas should be apart more than 5mm from other material. REV 0.9 Samsung Electro-Mechanics Proprietary 12/12 Regulatory Information FCC Compliance
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution Any changes or modifications NOT explicitly APPROVED by Samsung Electronics Co., Ltd. could cause the SWL-2900U module to cease to comply with FCC rules part 15, and thus void the user's authority to operate the equipment.
RF-exposure statement These modular transmitters, SWL-2900U, comply with FCC radiation exposure limits set forth for an uncontrolled environment. The SWL-2900U should be installed and operated with minimum distance 20cm between the antenna and the body of the user or nearby persons. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrate this module. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
Antenna These modular transmitters are for OEM integrations only. The end-user product will be installed in such a manner that only the authorized antennas are used.
Label and manual requirements for the End Product This device contains FCC ID: A3LSWL-2900U For an end product using the SWL-2900U there must be a label containing, at least, the following information:
FCC ID for model SWL-2900U The label must be affixed on an exterior surface of the end product such that it will be visible upon inspection in compliance with the modular approval guidelines developed by the FCC. Where the SWL-2900U will be installed in final products larger than 8cm x 10cm following statements has to be placed ONTO the device.
"This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation."
In case where the final product will be installed in locations where the end-consumer is not able to see the FCC ID and/or this statement, the FCC ID and the statement shall also be included in the end-product manual. The users manual for end users must include the following information in a prominent location "IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
EU Compliance
Regulatory compliance of the SWL-2900U The SWL-2900U are made for OEM integrations only. The European regulations applying to the SWL-2900U is the R&TTE Directive 1999/5/EC. SWL-2900U meets the following requirements of the R&TTE Directive. R&TTE Directive article Test category Harmonized standard Article 3.1(a) Protection of health and safety EN 60950-1, EN 50385 Article 3.1(b) EMC EN 301 489-1/-17 Article 3.2 Effective use of the spectrum EN 300 328 The conformity assessment for the SWL-2900U were completed in accordance with the R&TTE Directive Annex IV procedures, and the EC Declaration of Conformity is attached to this manual.
Cautions regarding regulatory compliance when integrating the SWL-2900U The person integrating the SWL-2900U becomes the manufacturer of the final product and is therefore responsible for demonstrating compliance of the product with the essential requirements of the R&TTE Directive. In all cases assessment of the final product must be made against the Essential requirements of the R&TTE Directive Article 3.1(a) and (b), safety and EMC respectively, and any relevant Article 3.3 requirements This device is intended only for OEM integrators under the following conditions:
1. This appliance and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 2. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements of the Council recommendation 1999/519/EC of 12 July 1999. As long as the 2 conditions above are met, no further evaluation under Article 3.2 of the R&TTE Directive and do not require further involvement of an R&TTE Directive Notified Body for the final product. In all other cases, or if the manufacturer of the final product is in doubt then the equipment integrating the radio module must be assessed against Article 3.2 of the R&TTE Directive. Please note that this product, SWL-2900U, uses radio frequency bands not harmonized throughout the Community. This product is classified as Class 2 radio equipment for which some Member States apply restrictions on placing on the market and in use. Any parties putting Class 2 radio equipment on the market must notify the relevant national spectrum management authority of their intention, and the radio equipment must be given a Class Identifier (alert symbol).
Antenna This product, SWL-2900U, is for OEM integrations only. The end-user product will be installed in such a manner that only the authorized antennas are used.
Enclosure This product, SWL-2900U, is made for integrating in another final product. For this reason, there are some parts of the final product on which the SWL-2900U depends for regulatory compliance regarding EMC and safety. The SWL-2900U is mounted on the circuit board of the final product, and must be contained inside the case of the final product. Integrated the SWL-2900U in the final product so that its surfaces are not in contact with the outside.
Documentation In the documentation for the conformity assessment of the final product, state clearly that the SWL-2900U is integrated in the system.
Conformity Assessment of the Products integrating the SWL-2900U The following is a supplementary explanation of conformity assessments for final products integrating the radio modules such as the SWL-2900U, that have passed conformity assessments in accordance with the R&TTE Directive. The procedures for conformity assessment in accordance with the R&TTE Directive are the responsibility of the manufacturer of the final product. With final products integrating radio modules, the person who integrates the module in the system becomes the manufacturer of the final product, and it is their responsibility to certify that the requirements of the R&TTE Directive and met.
Exemption from conformity assessment However, if radio modules that meet the requirements of the R&TTE Directive and that have passed the conformity assessment are integrated in a final product that follows the cautions concerning integrating radio modules, they are exempted from the conformity assessment for R&TTE Directive Article 3.2 (efficient use of the radio spectrum). For details, refer to the following Guidance and ETSI Technical Report from the R&TTE Compliance Association, and check whether your case applies. Organization R&TTE Compliance Association Document No. TGN 01 Rev 3 Document title Technical Guidance Note on Requirement for a Final Product that Integrates an R&TTE Directive Assessed Module URL You can download the guidance from the download area of R&TTE Compliance association. http://www.rtteca.com Organization ETSI (Technical report) Document No. ETSI TR 102 070-2 Document title Electromagnetic compatibility and Radio spectrum Matters (ERM);
Guide to the application of harmonized standards to multi-radio and combined radio and non-radio equipment; Part 2: Effective use of radio frequency spectrum URL You can download the guidance from the ETSI web site by entering TR102 070-2 in the search engine. Before downloading, you will be requested to register. http://www.rtteca.com
Conformity assessment procedures for final products exempted from R&TTE Directive Article 3.2 In every case, the manufacturer of a final product must follow the procedures for conformity assessment of the final product with the requirements of R&TTE Directive Article 3.1(a) and (b), for safety and EMC. The conformity assessment for Article 3.2 is carried out in accordance with the following:
1) Attach the EN 300 328 test report of the assessed radio module and the EC Declaration of Conformity to the conformity assessment of the final product (The Declaration of Conformity is attached to the manual). 2) Specify on the conformity assessment of the end product that the assessed radio module was integrated in the system without any changes, in accordance with the installation directions of the manufacturer.
Notification of the final product Please note that this product, SWL-2900U, uses radio frequency bands not harmonized throughout the Community. The notification required by R&TTE Directive Article 6(4) is necessary. It is the responsibility of the manufacturer of the final product to notify the relevant national spectrum management authority of the intention to place the final product on the market.
CE marking It is necessary to attach the CE mark to the final product to indicate that it conforms with all the directives that apply to the final product. It must be given a Class Identifier (alert symbol) in addition to the CE mark.
Exemption clause Samsung Electronics Co., Ltd. does not guarantee the accuracy of the information above. In case of doubt or uncertainty, we recommend that you check with the authorities or official certification organizations of the relevant countries.