all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 1.58 MiB | July 08 2001 / June 08 2001 | |||
1 |
|
Pages to be added | Users Manual | 19.31 KiB | July 08 2001 / June 08 2001 | |||
1 | Cover Letter(s) | June 08 2001 | ||||||
1 | RF Exposure Info | June 08 2001 | ||||||
1 | Cover Letter(s) | June 08 2001 | ||||||
1 | External Photos | June 08 2001 | ||||||
1 | Internal Photos | June 08 2001 | ||||||
1 | ID Label/Location Info | June 08 2001 | ||||||
1 | Parts List/Tune Up Info | June 08 2001 | ||||||
1 | Operational Description | June 08 2001 | ||||||
1 | RF Exposure Info | June 08 2001 | ||||||
1 | Test Setup Photos | June 08 2001 | ||||||
1 | Test Report | June 08 2001 |
1 | Manual | Users Manual | 1.58 MiB | July 08 2001 / June 08 2001 |
360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com APPENDIX F: MANUAL Certification Report For: ICOM America Document Number: 2000453 Page 40 of 51 SAMSUNG MagicLAN SWL-2000/2100 User Manual Notice 1 This manual cannot be reproduced in any form without the prior written permission of SAMSUNG Electro-Mechanics Co., Ltd. SAMSUNG Electro-Mechanics Co., Ltd. reserves the right to change this manual and the specifications to improve products without prior notice. So you can get the most recent software and user documentation for all MagicLAN products on our web site. All other brand and product names are trademarks of registered trademarks of their respective holders. http://www.MagicLAN.com Service Dept. Youngsik Lyu (youngsik@samsung.co.kr) Tel : +82-31-289-1043 Fax : +82-31-289-1060 Sales America Dae-Ho Yoon (daeho@samsung.co.kr) Tel : +82-31-289-1154 Fax : +82-31-289-1060 Europe John Choi (john7@samsung.co.kr) Tel : +82-31-289-1148 Fax : +82-31-289-1060 Southeast Asia Chang-Young Jang (chance@samsung.co.kr) Tel : +82-31-289-1153 Fax : +82-31-289-1060 China John Choi (john7@samsung.co.kr) Tel : +82-31-289-1148 Fax : +82-31-289-1060 Japan John Choi (john7@samsung.co.kr) Tel : +82-31-289-1148 Fax : +82-31-289-1060 Copyright 1999 - 2001 SAMSUNG Electro-Mechanics Co., Ltd. All rights reserved. 1 Notice 2 The SWL-2000N/2100N/2100E, SWL-2000P/2100P and SWL-2100U complies with Part 15 of the FCC rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: The SWL-2000N/2100N/2100E, SWL-2000P/2100P and SWL-2100U have been tested and found to comply with the limits for a Class B digital device and a low power transmitter, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to resolve the problem by one or more of the following measures;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an output on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. 2 Important Safety Information
!"Read these simple guidelines. Breaking the rules may be dangerous or illegal. SAMSUNG will not be responsible for any damages caused by breaking the rules.
!"WLAN Card described in this document is approved for use in a wireless local area network.
!"Remember to make backup copies of important data.
!"Samsung WLAN PC Card supports 3V(3.3V) Notebook computers.
!"When you are transferring data, keep your laptop computer stationary. Roaming between access points (APs) may break the connection.
!"Only qualified service personnel must repair the equipment.
!"All wireless devices may get interference, which could affect performance.
!"Use approved accessories only. Do not connect incompatible products.
!"Use only accessories approved by the WLAN Card manufacturer for use with this particular W LAN Card. The use of any other types will invalidate any approval or warranty applying to the WLAN Card, and may be dangerous.
!"Use only the region settings appropriate for the area where the WLAN Card is used at the present time. Using the card in any other region or with an incorrect region setting is prohibited and may be illegal.
!"Operation of any radio transmitting equipment, including a WLAN Card, may cause interference with the functionality of inadequately protected medical devices.
!"Do not use the WLAN Card on aircraft.
!"Do not use the WLAN Card at a refueling point.
!"Do not use the WLAN Card near inflammable materials or chemicals.
!"Do not use the WLAN Card where blasting is in progress.
!"Do not use the WLAN Card when the use of wireless device may cause interference or danger.
!"Do not use the WLAN Card where the use of cellular terminals is prohibited.
!"Microwave oven degrades the performance of wireless LAN drastically. So do not use the WLAN card in the environment where Microwave oven is being used. 3 Cover-
age Area
Open Space Closed Office Operating Voltage Current consumption Specifications Product Name General SWL-2000N SWL-2100N SWL-
2000P SWL-
2100P SWL-
2100E SWL-2100U Type PC Card Type II PCI 2.0 100m
(330ft) at 11Mbps 150m
(500ft) at 2 Mbps 20m
(65ft) at 11Mbps 40m
(130ft) at 2 Mbps 150m
(500ft) at 11Mbps 200m
(660ft) at 2 Mbps 30m
(100ft) at 11Mbps 50m
(160ft) at 2 Mbps 100m
(330ft) at 11Mbps 150m
(500ft) at 2 Mbps 20m
(65ft) at 11Mbps 40m
(130ft) at 2 Mbps 150m
(500ft) at 11Mbps 200m
(660ft) at 2 Mbps 30m
(100ft) at 11Mbps 50m
(160ft) at 2 Mbps 2MMCX Connector 150m
(500ft) at 11Mbps 200m
(660ft) at 2 Mbps 30m
(100ft) at 11Mbps 50m
(160ft) at 2 Mbps Printed Dipole Ant 150m
(500ft) at 11Mbps 200m
(660ft) at 2 Mbps 30m
(100ft) at 11Mbps 50m
(160ft) at 2 Mbps 3V +/- 5%
5V +/- 5%
3V +/- 5%
5V fromPC Tx: Max 320mA Rx: Max 200mA Tx: Max 450mA Rx: Max 280mA Tx: Max 320mA Rx: Max 200mA Tx: Max 450mA Rx: Max 280mA Tx: Max 450mA Rx: Max 280mA Tx: Max 450mA Rx: Max 280mA Data Rates Certifications Security Warranty Network Specifications Network architecture Wireless standard 1,2,5.5, and 11Mbps FCC Class B, FCC part 15.247, Canada, CE, Germany, Swiss, England, other Europe Countries and New R&TTE Approval, Korea, Japan WEP 64/128 bits encryption(40/104bits encryption) 1 Year Ad-hoc, infrastructure IEEE 802.11b Operating System Win 2k , Win CE(only supported by PC Card)***, Linux***
Win 95(OSR2)***, Win 98SE(98), Win ME, Win NT***, Roaming Radio Data Win XP (to be supported) IEEE 802.11 compliant with enhanced roaming features Frequency band Wireless medium Modulation techniques Sensitivity FCC, Canada, ETSI, Spain, France and Japan****
Direct Sequence Spread Spectrum CCK, BPSK, QPSK Min. 80dBm at 2Mbps/ Min. 78dBm at 11Mbps Output power Max 20mW Typical 13dBm Max 70mW Typical 17dBm Max 20mW Typical 13dBm 4 Max 70mW Typical 17dBm Max 70mW Typical 17dBm Max 70mW Typical 17dBm Environmental Specifications Temperature Humidity 0 C to 40 C in operation/ -20 C to 70 C in storage 95% non-condensing Physical Characteristics Dimension Weight Optional Antenna 113.8 54 6
(mm) 39g 113.8 54 6 (mm) 39g 148 90 16 (mm) 95g 148 90 16 85.6 54 6
(mm) 95g
(mm) 40g 114 52 15 (mm) 40g France Japan Patch Antenna, 3 / 5 Stub Antenna, Yagi Antenna Available Spain Canada
**The operating environment may affect coverage
*** Not to be supported by USB (Win CE, Linux will be supported soon)
**** Table: The Operating Channels FCC Channel# Frequency 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz 2467MHz 2472MHz 2484MHz ETSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 5 Table of Contents 1. MagicLAN Installation ...........8 1.1 Introduction ..........8 1.2 Technical Background .....8 1.3 MagicLAN Overview.............10 2. Before the Installation .......12 2.1 What is in your Package ....12 2.2 System Requirement ......12 3. MagicLAN Installation for Windows 95/98 .. .13 3.1 Installation Overview .....13 3.2 Installation Procedure of SWL-2000N/2100N/2100E PC Card ....13 3.3 Installation Procedure of SWL-2000P/2100P PCI Card ....14 3.4 Installation Procedure of SWL-2100U USB Card..16 3.5 Uninstallation Method ...........17 4. MagicLAN Installation for Windows NT 4.0 ......18 4.1 Installation Procedure of SWL-2000N/2100N/2100E PC Card ....18 4.2 Installation Procedure of SWL-2000P/2100P PCI Card ....20 4.3 Uninstallation Method ...22 5. MagicLAN Installation for Windows 2000.......23 5.1 Installation Procedure of SWL-2000N/2100N/2100E PC Card 23 5.2 Installation Procedure of SWL-2000P/2100P PCI Card ....24 5.3 Installation Procedure of SWL-2100U USB Card..24 5.4 Uninstallation Method26 6. MagicLAN Installation for Windows CE..27 7. MagicLAN Installation for Linux......28 7.1 Installation procedure of SWL-2000N/2100N/2100E PC Card.....28 7.2 Installation procedure of SWL-2000P/2100P PCI Card.35 8. The Program for setting MagicLAN..........42 8.1 The concept of Profile.....42 8.2 Installation Procedure.....43 9. The main configuration of Program......49 6 9.1 Profile......51 9.1.1 The New button.......51 9.1.2 The Apply button........51 9.1.3 The Edit button....51 9.1.4 The Delete button........53 9.2 Status.......54 9.2.1 The Current Status button..........54 9.2.2 The AP Status button.........55 9.2.3 The Site Survey button.......56 9.2.4 Statistics................56 9.3 General Settings..............57 9.3.1 The DHCP button......57 9.3.2 The Options button....57 9.4 Version....58 10. Troubleshooting .........59 10.1 Procedure to Check the Various Properties of Card after Installation..59 10.2 Probable Symptoms and their Diagnosis......62 7 1. MagicLAN Installation 1.1 Introduction Thank you for your purchase of SAMSUNG MagicLAN. This new Adapter series includes two different models: SWL-2000N/2100N/2100E for PC Card-compatible computers, SWL-2000P/2100P for PCI-compatible computers and SWL-2100 for USB-compatible computers. Installing those cards allow the computer to join a wireless network based on the IEEE 802.11b (High Data Rate) WLAN standard. You will be surprised how easy for you are a part of the network with no bother of twisted cables. 1.2 Technical Background What is IEEE 802.11?
The IEEE 802.11 specification is a wireless LAN standard developed by the IEEE (Institute of Electrical and Electronic Engineering) committee in order to specify an over an air interface between a wireless client and a base station or Access Point (AP), as well as among wireless clients. Like other IEEE 802 families, IEEE 802.11 specification addresses both Physical (PHY) layer and Media Access Control (MAC) layer. IEEE 802.11 Physical (PHY) Layer At the PHY layer, IEEE 802.11 defines three physical characteristics for WLAN: diffused infrared, direct sequence spread spectrum (DSSS), and frequency hopping spread spectrum
(FHSS). While the infrared PHY operates at the baseband, the other two PHYs operate at the 2.4GHz ISM (Industrial, Scientific, and Medical) band, which can be used for operating wireless LAN devices without the need of end-user licenses. In order for wireless devices to be interoperable, they have to be conforming to the same PHY standard. IEEE 802.11 Media Access Control (MAC) Layer The IEEE 802.11 MAC Layer is mainly concerned with the rules for accessing the wireless medium. There are two network architectures defined: Ad-hoc Network and Infrastructure Network. Ad-hoc Network Ad-hoc Network is an architecture that supports mutual communication among wireless clients only. Since Ad-hoc Network does not support access to wired networks, it does not need an Access Point to be a part of the network. You can use the network immediately after setting up the operating mode by installing the supplied network driver. 8 Infrastructure Network Infrastructure Network is architecture that provides communication between wireless clients and wired network resources. An Access Point (AP) and the associated wireless clients define the transition of data. So a wireless client can access all the services that are available for a regular wired LAN by using an AP. Server Server BSS A BSS A BSS A BSS A BSS B BSS B BSS B BSS B 9 Roaming Roaming is a service that allows wireless clients to use the network in motion by automatically changing the connection from an old Access Point to a new Access Point when the clients enter in a new cell. During roaming the clients may observe the loose connection or delay in accessing the resources of the network. Scanning, Beaconing & ESS ID When a wireless client is initialized, it is necessary for it to find and communicate with the correct group of wireless devices, including AP. At this point, it may search for all the frequency channels and this process is called scanning. There may be multiple APs and networks operating at the same time. It may be necessary to ensure that the station joins with the correct network during the scanning process. To achieve this, each AP is assigned to be part of a logical group called the Extended Service Set (ESS). The name of this logical group is the ESS ID. When roaming is operating, there may be several Access Points as part of the same ESS. After the power on, wireless clients will listen on its default frequency channel. It will be listening for beacons sent by another wireless station or AP. Beacon is a short message containing the ESS ID that will be broadcast roughly ten times a second. When the wireless station hears a beacon and the ESS ID in the beacon matches its own, the client knows that it is on the correct channel and can communicate with its group. If no beacons are seen, or if the ESS ID does not match, the wireless client may move to the next frequency channel and repeat this listening procedure. In case of direct sequence spread spectrum (DSSS) physical layer, this scanning process occurs at start up and may also occur when the client roams between APs. 1.3 MagicLAN Overview The MagicLAN SWL-2000P/2100P (for Desktop PCs), SWL-2000N/2100N/2100E (for Notebook PCs) and SWL-2100U(for Desktop PCs and Notebook PCs) are wireless LAN adapter cards that provide wireless connection between computers. The MagicLAN is designed to operate with IEEE 802.11 (wireless LAN International Standard) wireless compliant radio cards and uses a CSMA/CA (Collision Sense Multiple Access with Collision Avoidance) algorithm as the media access scheme, which makes high speed communication (with minimal collision probability) possible. 10 The MagicLAN supports DSSS (Direct Sequence Spread Spectrum) physical layer. This is a radio technique, which scrambles the data prior to transmission and uses a correlation technique on receiver to improve the signal to noise ratio and makes it possible to communicate in the office having a wall and a compartment. The function of the MagicLAN Access Point is to transfer information from a wired LAN to a wireless LAN and vice versa. When operating, the MagicLAN AP is invisible to most users (Normally, unless the user is an administrator, the MagicLAN AP cannot be seen or accessed by users on the network). The SWL-2000N/2100N/2100E for Notebook PC is small and portable as a roaming function is provided for users who need network services while maintaining mobility. The MagicLAN Adapter (only PC Card) has an LED (Light Emitting Diode) on the part of the card. The yellow LED will illuminate when the power is supplied and the card is inserted properly. The MagicLAN supports various network software. The network driver is provided to support network software such as Windows 95(OSR2), Windows 98/98SE,ME, Windows NT 4.0, Windows 2000, Windows CE, Linux (cf. Win 95(OSR2) and Windows NT 4.0 are not supported by USB Card) The Caution of using the SWL-2000P/2100P 1. Make the Antenna of WLAN PCI Card and WLAN PC Card of AP in same direction. 2. The efficiency of communication can be improved by regulating the direction of WLAN PCI Card and AP. The Caution of using the SWL-2100U Some problems may occur when you use the other USB equipments, such as PC Camera, scanner, etc, with the USB Card. To get further information of Samsung MagicLAN WLAN Card, please visit our website at http://www.magiclan.com to download the respective drivers. 11 2. Before the Installation The following section will assist you in installing your WLAN Adapter successfully. You will first install software (driver) and then will insert the SWL-2000P/2100P, SWL-
2000N/2100N/2100E or SWL-2100U WLAN card, and finally set the network properties to accommodate resource sharing and select the type of wireless network that you wish to install. The MagicLAN can easily be installed and used, without bothering to connect cables for keeping your computer to use network resources, as in case of a wired LAN. 2.1 What is in Your Package?
Please check the contents of the box to make sure everything is included and ready for use. Here is the list of what you should have in your package:
SWL-2000N/2100N/2100E (PC Card), SWL-2000P/2100P(PCI Card) or SWL-
2100U(USB Card) SWL-2000X Installation CD External Antenna (for SWL-2000P/2100P only) 2.2 System Requirement Operating System: MS Windows 95(OSR2)/98/98SE,ME, Windows NT 4.0, Windows 2000, Windows CE, Linux Computer System (both Notebook and Desktop) with a CD-ROM drive For Desktop PC Adapter Card (SWL-2000P/2100P):
The computer system should have an extra IRQs and I/O address. For Notebook PC Adapter Card (SWL-2000N/2100N/2100E):
The computer system should have PCMCIA Type II or Type III card slot. Important: In case of using 3V PC Card, notebook PC must support 3V(3.3V) Card. If you are not aware of this issue, please contact your dealer. Some old Notebook PCs may not support 3.3V Card. 12 3. MagicLAN Installation for Windows 98/98SE/ME There are two types of WLAN Cards i.e. PC Card and PCI Card for Notebook PC and Desktop PCs respectively. Here we explain the procedure of installing both cards under Windows 98/98SE/ME operating system (OS) one by one (to be also supported by Windows 95(OSR2)). We will explain for SWL-
installation method for SWL-
2000N/2100N/2100E PC Card followed by the 2000P/2100P PCI Card and SWL-2100U USB Card . 3.1 Installation Overview Here are some steps you will perform in establishing your wireless network connection:
installation method the Install the Access Point at first. AP is needed in case of Infrastructure network mode. Install the software using the Installation CD. Now you should install the Wireless LAN Card (SWL-2000N/2100N/2100E or SWL-2000P/2100P or SWL-2100U). Install the network protocol(s) required to communicate on your network. Most likely you will need the TCP/IP protocol. 3.2 Installation Procedure of SWL-2000N/2100N/2100E PC Card Please follow the following steps one by one in order to install the PC Card successfully. 1. Power on your computer and allow Windows 98/98SE/ME to load fully. 2. Be sure that there is no PC Card adapter inserted yet. 3. Insert the given Installation CD in the CD-ROM. Select the Software Installation from the menu and then click on the Install. 4. Select the Windows PC Card and PCI Card Driver from the menu then the Setup Program will be installed automatically. 5. Accept the license agreement. 6. Give the path of the destination folder. To set the path of your choice click Browse and then click Next. 7. Select the type of card. As you are preparing to install the PC Card, select the SWL-
8. 2000/2100(PC Card type) and click on Next. It takes a few seconds for copying the utility files and then click on Finish to complete the installation. 13 9. Insert the PC Card. Illuminating LED and Sound confirms the detection of your PC card. Also you will see the PC Card icon on the right bottom of your screen. 10. Restart your computer and a message window pops up saying New Hardware Found 11. It takes a few seconds in setting up the driver for the new hardware . 12. Check for the SAMSUNG 11Mbps WLAN PC Card 3V/5V by right clicking on My Computer using the mouse. Select the Device manager and then Network Adapters. If you find the Yellow sign on the adapter, it shows the installation is not successful. Select the adapter and click on Remove. Restart your computer after uninstalling (See the Uninstallation method in section 3.4) the driver to make the changes effective. And refer to the Troubleshooting at the end of the manual. 13. Right click on the Network Neighborhood using the mouse. 14. Select Properties from the pop up menu. The network box appears and you see three main tabs: Configuration, Identification and Access Control. 15. Click on the Configuration tab and then click on the Add button. Select Network Component Type box appears. Click on the Protocol then click the Add button. 16. Select Network Protocols box appears. From the list of manufactures, click on Microsoft. From the list of network protocols list, select IPX/SPX, then click OK. 17. IPX/SPX protocol is now installed. After clicking on OK return back to Network Component Type box. 18. Repeat the step 16 and 17 to add TCP/IP protocol. 19. If you want, you can install the NetBEUI protocol. 20. Click on the TCP/IP and set the IP address value, Gateway value, DNS value for your computer. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the Access to your computer by other users connected to that network by setting the computer sharing options. Click on OK. 21. Screen message do you want to restart your Computer will pop up. Select Yes. It will shut down your computer and will restart. 22. After rebooting your computer, you can set up WLAN Utility Program provided previously. Refer to chap 6 in this manual. 3.3 Installation procedure of SWL-2000P/2100 PCI Card Please follow the following steps one by one to install the PCI card successfully. 1. Power on your computer. 2. Be sure that there is no PCI card inserted yet. 14 3. Insert the Installation CD. Select the Software Installation from the menu and click on Install. 4. Select the Windows PC Card and PCI Card Driver from the menu then Setup Program will be installed automatically. 5. Accept the license agreement. 6. Give the path of the destination folder. Click on NEXT. 7. Select the type of card as SWL-2000/2100(PCI Card Type) and click on NEXT. 8. Click on Finish to complete the software installation. 9. Switch off your computer and insert the PCI Card in the PCI slot. 10. Restart your computer and a message window pops up saying New Hardware Found. 11. It takes a few seconds in setting up the driver for the new hardware. 12. Check for the SAMSUNG 11Mbps WLAN PCI Card by clicking on the Device manager. If you find the Yellow sign on the adapter, it shows the installation is not successful. Select the Adapter and click on Remove. Restart your computer after uninstalling (See the Uninstallation method in section 3.4) the driver. And refer the troubleshooting at the end of manual. 13. Right click on the Network Neighborhood using the mouse. 14. Select Properties from the pop up menu. The network box appears and you see three main tabs: Configuration, Identification and Access Control. 15. Click on the configuration tab and then click on the add button. Select Network Component Type box appears. Click on the Protocol then click the Add button. 16. Select Network Protocols box appears. From the list of manufactures, click on Microsoft. From the list of network protocols list, select IPX/SPX, then click OK. 17. The IPX/SPX protocol is now installed. After clicking on OK return back to Network Component Type box. 18. Repeat the steps 16 and 17 to add TCP/IP protocol. 19. If you want, you can install the NetBEUI protocol. 20. Select the TCP/IP option for setting the IP address value, gateway value and DNS value of your computer. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the access to your computer by other users connected to that network by setting the appropriate options. 21. Screen message Do you want to restart your Computer will pop up. Select Yes. It will shut down your computer and will restart. 22. After rebooting your computer, you can set up WLAN Utility Program provided previously. Refer to chap 6 in this manual. 15 3.4 Installation procedure of SWL-2100U USB Card Please follow the following steps one by one to install the USB card successfully 1. Power on your computer. 2. Insert the Installation CD. Select the Software Installation from the menu and click on Install. 3. Select the Windows USB Card Driver from the menu then Setup Program will be installed automatically. 4. Accept the license agreement. 5. Give the path of the destination folder. Click on NEXT. 6. Click on Finish to complete the software installation. 7. Insert the USB Card. Illuminating LED and Sound confirms the detection of your USB card. Also you will see the USB Card icon on the right bottom of your screen 8. A message window pops up saying New Hardware Found. 9. It takes a few seconds in setting up the driver for the new hardware . 10. Check for the SAMSUNG 11Mbps WLAN USB Card by clicking on the Device manager. If you find the Yellow sign on the adapter, it shows the installation is not successful. Select the Adapter and click on Remove. Restart your computer after uninstalling (See the Uninstallation method in section 3.4) the driver. And refer the troubleshooting at the end of manual. 11. Right click on the Network Neighborhood using the mouse. 12. Select Properties from the pop up menu. The network box appears and you see three main tabs: Configuration, Identification and Access Control. 13. Click on the configuration tab and then click on the add button. Select Network Component Type box appears. Click on the Protocol then click the Add button. 14. Select Network Protocols box appears. From the list of manufactures, click on Microsoft. From the list of network protocols list, select IPX/SPX, then click OK. 15. The IPX/SPX protocol is now installed. After clicking on OK return back to Network Component Type box. 16. Repeat the steps 14 and 15 to add TCP/IP protocol. 17. If you want, you can install the NetBEUI protocol. 18. Select the TCP/IP option for setting the IP address value, Gateway value and DNS value of your computer. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the access to your computer by other users connected to that network by setting the appropriate options. 19. Screen message do you want to restart your Computer will pop up. Select 16 Yes. It will shut down your computer and will restart. 20. After rebooting your computer, you can set up WLAN Utility Program provided previously. Refer to chap 6 in this manual. 3.5 Uninstallation Method:
If you want to uninstall the PC Card/PCI Card/USB Card under Windows 95(OSR2), Windows 98/98SE,ME, click the MagicLAN Utility Uninstall from the start button on the desk bar. Check on the Remove all MagicLAN Software and Click the Next button. UninstallShield removes the software successfully.
(cf. If you want to just remove the WLAN Card from the PC, Click the Stop SAMSUNG 11Mbps WLAN PC Card/PCI Card/USB Card on the right bottom of your computer screen. Then you remove the WLAN Card after clicking the OK button on the message, SAMSUNG 11Mbps WLAN PC Card/PCI Card/USB Card device can now be safely removed from the system) 17 4. MagicLAN Installation for Windows NT 4.0 4.1 Installation procedure of SWL-2000N/2100N/2100E PC Card Important: Some notebook computers for Win NT 4.0 operating system that do not support 3V cards will not install your 3V PC Card successfully. You are advised to install the driver for PC Card Controller available from set manufactures or install the CardWizard program that will enable the notebook computers supporting 5V cards to support 3V cards also and will install your PC Card successfully. Please follow the following steps one by one to install the PC Card successfully. There are two cases: one is when there is no Windows NT networking Installed and the other is when the Windows NT networking is installed. When Windows NT networking is not installed yet:
1. Power on your PC and allow the Windows NT to load fully. 2. Now insert the Installation CD. Select the software Installation and click on Install. Then if you click on the Windows PC Card and PCI Card driver, the MagicLAN Setup Program will start to install. 3. When there is no Windows NT networking installed yet. You should install your driver manually. To do so, click on start in task bar, go to Settings and then to Control Panel. 4. Under Control Panel, double click on Network icon. 5. Since there is no Windows NT networking installed yet, you will be asked if you want to install NT networking first. Click on Next and then you will be asked how will you access the network: modem or LAN. Check the proper selection and click on next. In network setup wizard box, click on select from list button. 6. In Select Network Adapter box click on Have Disk button. 7. In Insert Disk box, you may be asked to specify the necessary software directory. Insert the MagicLAN Installation CD into the CD-ROM drive. Type in D:\nt40
(Where D is the CD-drive of your Notebook) in the blank and click on OK. 8. In Select OEM Option box, you will see Samsung 11Mbps WLAN PC Card/
Samsung 11Mbps WLAN PCI Card and select the correct card type and click on OK. 9. You confirm the Samsung 11Mbps WLAN PC Card. 10. Select the network protocols by clicking on the Protocols. And click on TCP/IP. 11. In the next box to choose network services to use, make sure that all the services you want to use are checked and click on Next. 18 12. In the next box it is confirmed that necessary NT networking components are selected. Click on Next. When you are asked to specify the directory that the necessary NT files are copied from; Insert your Windows NT CD and type in D:\i386 in the location blank. 13. Some files from the D:\i386 directory are copied and you may be prompted the same box to ask you to specify where NT files are once more. 14. Since it is looking for some files from the installation CD, insert your installation CD in CD drive and type D:\nt40 in the blank location and click on continue. 15. SAMSUNG 11Mbps WLAN Card setup box may appear. Set each parameter (I/O Address, Interrupt) for the proper system configuration set up and other parameters
(network mode, ESS ID, and Tx Rate) for the proper LAN card configuration. If the resource allocation or I/O addresses conflicts with other devices, change the I/O address or Interrupt using the Windows NT Diagnostic program. 16. Next box will say network installation is done and network is ready to start. Click on Next. 17. If you select the DHCP option for TCP/IP, you do not need to set the values. If you select the Static option, enter the IP value, Subnet masking, Gateway, and DNS values respectively and then click on OK. 18. If you want, you can install the NetBEUI protocol. 19. Now it is ready for installing networking. Click on NEXT. 20. You can assign the Workgroup/ Domain name. And click on NEXT. 21. Click on the Finish and it will ask you whether you want to restart your computer or not. Click on Yes. 22. Insert the PC Card in the PC Card slot and restart your computer so that the changes may be placed in effect. 23. If your computer does not detect the PC Card WLAN Card or the card is not functioning properly, refer to the Troubleshooting at the end of the manual. When Windows NT networking is installed already:
1. Power on your computer. 2. Now insert the Installation CD. Select the Software Installation and click on Install. Then if you click on the Windows PC Card and PCI Card driver, the MagicLAN Setup Program will start to install. 3. Right click on the Network Neighborhood using the mouse and select Properties. 4. Select the Adapter. And click on Add. 5. Since it is looking for the driver files, enter the path name D:\nt40 (where D is the CD drive of your Notebook PC) and click on Have Disk. It copies the driver files. You will see Samsung 11Mbps WLAN PC Card/ Samsung 11Mbps WLAN 19 PCI Card and select the correct card type and click on OK. 6. Configure Wireless LAN Card box may appear. Set each parameter (I/O base, Interrupt) for the proper system configuration set up and other parameters (network mode, ESS ID, and Tx rate) for the proper LAN card configuration. 7. Click on Bindings. 8. Click on the Protocol to access the network and share the resources. 9. Select TCP/IP and you can select either DHCP or Static for the IP address. If you select DHCP, you do not need to specify the IP address. If you select the Static option, enter the IP value, Subnet masking, Gateway, and DNS values respectively. Also add the Workgroup/ Domain name 10. If you want, you can add the optional protocols such as NetBEUI. 11. After you add the TCP/IP protocol, it will ask you whether you want to restart your computer or not. Click on Yes to make the changes effective and insert the PC Card in the PCMCIA slot. Now your network is established successfully, if your PCMCIA card is detected. If you encounter some problems during installation or your card is not functioning properly, please refer to the Troubleshooting at the end of the manual. 4.2 Installation procedure of SWL-2000P/2100P PCI Card Please follow the following steps one by one to install the PCI card successfully. There are two cases: when there is no Windows NT networking Installed and the other when the Windows NT networking is installed. When Windows NT networking is not installed:
1. Power on your PC on and allow the Windows NT to load fully. 2. Now insert the Installation CD. Select the software Installation and click on Install. Then if you click on the Windows PC Card and PCI Card driver, the MagicLAN Setup Program will start to install. 3. Shut down your computer and insert the PCI card in the PCI slot and restart your computer. 4. Since there is no Windows NT networking installed yet. You should install your driver manually. To do so, click on start in task bar, go to Settings and then to Control Panel. 5. Under Control Panel, double click on Network icon. 6. Since there is no Windows NT networking installed yet (If you have already installed Windows NT networking, jump to the step 13 directly), you maybe asked 20 if you want to install NT networking first. Click on Next and then you will be asked how will you access the network: modem or LAN. Check the proper selection and click on next. In network setup wizard box, click on select from list button. 7. In Select Network Adapter box click on Have Disk button. 8. In Insert Disk box, you may be asked to specify the necessary software directory. Insert the MagicLAN Installation CD into the CD-ROM drive. Type in D:\nt40
(Where D is the CD-drive of your Notebook) in the blank and click on OK. 9. In Select OEM Option box, you will see Samsung 11Mbps WLAN PC Card/
Samsung 11Mbps WLAN PCI Card and select the correct card type and click on OK. You confirm the Samsung 11Mbps WLAN PCI Card. 10. Select the network protocols by clicking on the Protocols. And click on TCP/IP. 11. In the next box to choose network services to use, make sure that all the services you want to use are checked and click on Next. 12. In the next box it is confirmed that necessary NT networking components are selected. Click on Next. When you are asked to specify the directory that the necessary NT files are copied from, insert your Windows NT CD and type in D:\i386 in the location blank. 13. Some files from the D:\i386 directory are copied and you may be prompted the same box to ask you to specify where NT files are once more. 14. Since it is looking for some files form the installation CD, insert your installation CD in CD drive and type D:\nt40 in the blank location and click on continue. 15. Configure WLAN Card box may appear. Set each parameter (I/O base) for the proper system configuration set up and other parameters (network mode, ESS ID, and Tx rate) for the proper LAN card configuration. 16. TCP/IP installation message will pop up. Select NO for DHCP. 17. If you select the DHCP option for TCP/IP, you do not need to set the values. If you select the Static, enter the IP value, Subnet masking, Gateway, and DNS values respectively and then click on OK. 18. Binding properties will pop up. Click on NEXT. 19. If you want, you can install the NetBEUI protocol. 20. Now it is ready for installing networking. Click on NEXT. 21. Networking is confirmed. Click on NEXT. 22. You can assign Workgroup/ Domain name. And click on NEXT. 23. Click on the Finish and it will ask you whether you want to restart your computer or not. Click on Yes. 24. If your PCI card is not detected or not functioning properly, please refer to Troubleshooting at the end of the manual. 21 When Windows NT networking is already installed:
1. Power on your computer. 2. Now insert the Installation CD. Select the Software Installation and click on Install. Then if you click on the Windows PC Card and PCI Card driver, the MagicLAN Setup Program will start to install. 3. Shut down your computer and insert the PCI card and restart your computer. 4. Right click on the Network Neighborhood using the mouse and select Properties. 5. Select the Adapter. And click on Add. 6. Since it is looking for the driver files, enter the path name D:\nt40 (where D is the CD drive of your Notebook PC) and click on Have Disk. It copies the driver files. And you will see Samsung 11Mbps WLAN PC Card/ Samsung 11Mbps WLAN PCI Card and select the correct card type and click on OK. 7. Configure Wireless LAN Card box may appear. Set each parameter (I/O base) for the proper system configuration set up and other parameters (network mode, ESS ID, and Tx rate) for the proper LAN card configuration. 8. Click on Bindings. 9. Click on the Protocols to access the network and share the resources. 10. Select TCP/IP and you can select either DHCP or Static for the IP address. If you select DHCP, you do not need to specify the IP address. In case of Static, enter IP value, Subnet masking, Gateway, and DNS values respectively. Also enter the Workgroup/Domain name. 11. If you want, you can add the optional protocols such as NetBEUI. 12. After you add the TCP/IP protocol, it will ask you whether you want to restart your computer or not. Click on Yes to make the changes effective. Now your network is established successfully, if your PCI card is detected. If you encounter some problems during installation or if your card is not functioning properly, please refer to the Troubleshooting at the end of the manual. 4.3 Uninstallation Method:
If you want to uninstall the PC Card/PCI Card/USB Card under Windows 95(OSR2), Windows 98/98SE,ME, click the MagicLAN Utility Uninstall from the start button on the desk bar. Check on the Remove all MagicLAN Software and Click the Next button. UninstallShield removes the software successfully. If it is done, right click on the Network Neighborhood using the mouse and eliminate the SAMSUNG 11Mbps LAN PC Card (PCI Card) on the General 22 5. MagicLAN Installation for Windows 2000 5.1 Installation Procedure of SWL-2000N/2100N/2100E PC Card Please follow the following steps one by one in order to install the PCMCIA card successfully. 1. Power on your computer and allow Windows 2000 to load fully. 2. Be sure that there is no PC Card adapter inserted yet. 3. Insert the given Installation CD in the CD-ROM. Select the Software Installation from the menu and then click on the Install. 4. Select the Windows PC Card and PCI Card Driver from the menu then Setup Program will be installed automatically. 5. Accept the license agreement. 6. Give the path of the destination folder. To set the path of your choice click on Browse and then click Next. 7. Select the type of card. As you are preparing to install the PC Card, select the SWL-
2000/2100(PC CARD type) and click on Next. 8. It takes a few seconds for copying the utility files and then click on Finish to complete the installation. 9. Insert the PC Card. Illuminating LED and Sound confirms the detection of your PC card. Also you will see the PC Card icon on the right bottom of your screen. 10. Windows 2000 may display a message states that No valid Windows 2000 signature was found. Continue the installation by clicking on YES. The drivers are then loaded. 11. Check for the SAMSUNG 11Mbps WLAN PC Card 3V/5V on Computer Management in the Administrative Tools. If you find the Yellow sign on the adapter, it shows the installation is not successful. Select the adapter and click on Remove. Restart your computer after uninstalling (See the Uninstallation method in section 5.3) the driver to make the changes effective. 12. Right click on the Network Places using the mouse and clicks on the Local Area Connection and then click on Properties.. 13. Click on the TCP/IP option for setting the IP address for your computer. Set the IP value, Gateway value, DNS value. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the Access to your computer by other users connected to that network by setting the computer sharing options. Click on OK. 14. After rebooting your computer, you can set up WLAN Utility Program provided previously. Refer to Chapter 8 in this manual. 23 5.2 Installation procedure of SWL-2000P/2100P PCI Card Please follow the following steps one by one to install the PCI card successfully. 1. Power on your computer. 2. Be sure that there is no PCI card inserted yet. 3. Insert the Installation CD. Select the Software Installation from the menu and click on Install. 4. Select the Windows PC Card and PCI Card Driver from the menu then Setup Program will be installed automatically. 5. Accept the license agreement. 6. Give the path of the destination folder. To set the path of your choice click on Browse and then click Next. 7. Select the type of card as SWL-2000/2100(PCI CARD type) card and click on NEXT. 8. Click on Finish to complete the software installation. 9. Switch off your computer and insert the PCI card in the PCI slot. 10. Restart your computer and a message window pops up saying New Hardware Found. 11. It takes a few seconds in setting up the driver for the new hardware. 12. Check for the SAMSUNG 11Mbps WLAN PCI Card on Computer Management in the Adminidtrative Tools . If you find the Yellow sign on the adapter, it shows the installation is not successful. Select the adapter and click on Remove. Restart your computer after uninstalling (See the Uninstallation method in section 5.3) the driver to make the changes effective. 13. Right click on the Network Places using the mouse and clicks on the Local Area Connection and then click on Properties.. 15. Click on the TCP/IP option for setting the IP address for your computer. Set the IP value, Gateway value, DNS value. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the Access to your computer by other users connected to that network by setting the computer sharing options. Click on OK. 16. After rebooting your computer, you can set up WLAN Utility Program provided previously. Refer to Chapter 8 in this manual. 5.3 Installation procedure of SWL-2100U USB Card Please follow the following steps one by one to install the USB card successfully 24 1. Power on your computer. 2. Insert the Installation CD. Select the Software Installation from the menu and click on Install. 3. Select the Windows USB Card Driver from the menu then Setup Program will be installed automatically. 4. Accept the license agreement 5. Give the path of the destination folder. To set the path of your choice click on Browse and then click Next. 6. Click on Finish to complete the software installation. 7. Insert the USB Card. Illuminating LED and Sound confirms the detection of your USB card. Also you will see the USB Card icon on the right bottom of your screen. 8. A message window pops up saying New Hardware Found. 9. It takes a few seconds in setting up the driver for the new hardware. 10. Check for the SAMSUNG 11Mbps WLAN USB Card by clicking on the Device manager. If you find the Yellow sign on the adapter, it shows the installation is not successful. Select the Adapter and click on Remove. Restart your computer after uninstalling (See the Uninstallation method in section 3.4) the driver. And refer the troubleshooting at the end of manual. 11. Right click on the Network Neighborhood using the mouse. 12. Select Properties from the pop up menu. The network box appears and you see three main tabs: Configuration, Identification and Access Control. 13. Click on the configuration tab and then click on the add button. Select Network Component Type box. Click on the Protocol then click the Add button. 14. Select Network Protocols box appears. From the list of manufactures, click on Microsoft. From the list of network protocols list, select IPX/SPX, then click OK. 15. The IPX/SPX protocol is now installed. After clicking on OK return back to Network Component Type box. 16. Repeat the steps 14 and 15 to add TCP/IP protocol. 17. If you want, you can install the NetBEUI protocol. 18. Select the TCP/IP option for setting the IP address value, Gateway value and DNS value of your computer. After setting these parameters appropriately, click OK to return to Network Component Type and you can select the File and Printer Sharing options as well as the access to your computer by other users connected to that network by setting the appropriate options. 19. Screen message do you want to restart your Computer will pop up. Select Yes. It will shut down your computer and will restart. 20. After rebooting your computer, you can set up WSAN Utility Program provided previously. Refer to Chapter 8 in this manual. 25 5.4 Uninstallation Method:
If you want to uninstall the PC Card/PCI Card/USB Card under Windows 2000, click the MagicLAN Utility Uninstall from the start button on the desk bar. Check on the Remove all MagicLAN Software and Click the Next button. UninstallShield removes the software successfully.
(cf. If you want to just remove the WLAN Card from the PC, Click the Stop SAMSUNG 11Mbps WLAN PC Card/PCI Card/USB Card on the right bottom of your computer screen. Then you remove the WLAN Card after clicking the OK button on the message, SAMSUNG 11Mbps WLAN PC Card/PCI Card/USB Card device can now be safely removed from the system) 26 6. Magic LAN Installation for Windows CE 1. First of all, to determine whether your Windows CE device can be used in combination with this Magic LAN driver, verify the version of the operating system and the processor type of your Windows CE device. To get the version of the operating system and the type of processor used on your Windows CE device, open "Control Panel" , double click on "System Properties" and the device will show the information.
(HPC is Handheld PC WebPad or like small notebook-, PPC is Palm PC(or Pocket PC)(for example Compaq iPaq Pocket PC).) 2. Ensure your desktop PC and Win CE set are connected and the Windows CE services are running on the desktop computer.(with ActiveSync) 3. Insert the installation CD then it will be installed automatically. Select the Soft installation and click on Install. Select Windows CE PC Card Driver. You will see the message of choosing Win CE version. Select the appropriate version and click on OK to start installation. 4. After finish the installation, insert PC Card. You will see the message to set IP then select the appropriate IP.(To get more information, contact with Network Manager) 4-1 To change IP in another way, click Control Panel->Network and select SWLD11CE:Samsung 11Mbps Wireless LAN PC Card Driver, then you can change IP. 27 7. MagicLAN Installation for Linux 7.1 Installation Procedure of SWL-2000N/2100N/2100E PC Card
* SAMSUNG 11Mbps Wireless LAN PCMCIA device driver for Linux (swld11_cs).
Electro-Mechanics SAMSUNG Copyright CO.,Ltd. 2000
(c)
http://www.MagicLan.com
* All rights reserved. This file contains general information on the SAMSUNG 11Mbps PC Card, and specific information for the Linux software.
Table of Contents:
1. About the Linux Driver Source/Library distribution 2. Installation 3. Troubleshooting 4. Module parameters
1. About the Linux Driver Source/Library distribution
The distribution archive swld11_cs-1.21.tar.gz contains driver source files. With this software you can build and install a SAMSUNG 11Mbps PC Card driver for your specific Linux kernel. Currently Linux kernel versions 2.0.x through 2.4.x for the Intel architecture are supported. 2. Installation
1) Get David Hinds' PCMCIA package source at http://pcmcia-cs.sourceforge.net/
2) Unpack the PCMCIA package (usually into /usr/src) and change into its directory (usually /usr/src/pcmcia-cs-3.1.*). 3) Extract the SAMSUNG 11Mbps PC Card distribution archive into the standard PCMCIA distribution. 28
% cd pcmcia-cs-3.1.*
% tar xzvf swld11_cs-1.21.tar.gz 4) Build and install the PCMCIA package as normal.
% make config
% make all
% make install 5) Configure the SAMSUNG 11Mbps PC Card. Refer to the PCMCIA documentation for more information (network adapter sections).
% more PCMCIA-HOWTO
% vi /etc/pcmcia/config.opts For example:
a) Attaching to an access point with the network name of
"Magiclan", enter the following in the config.opts file:
module "swld11_cs" opts "essid=Magiclan"
b) Ad-Hoc (peer-to-peer) network without an access point, enter the following in the config.opts file:
module "swld11_cs" opts "networkmode=3"
c) Attach to an access point with the network name of "Ocean", and export the station name as "magiclan", enter the following in the config.opts file:
module "swld11_cs" opts "essid=Ocean stationname=magiclan"
% vi /etc/pcmcia/network.opts Modify the network options for your adapter. The parameters need to be correct for the connected network. Check with your system administrator for the correct network information. Refer to the PCMCIA-HOWTO for more configuration information. For example:
*,*,*,*) IF_PORT=""
BOOTP="n"
IPADDR="10.0.0.5"
NETMASK="255.255.255.0"
NETWORK="10.0.0.0"
BROADCAST="10.0.0.255"
GATEWAY="10.0.0.1"
DOMAIN="domain.org"
DNS_1="dns1.domain.org";;
29
*,0,*,*)
# definitions for network card in socket 0
*,1,*,*)
# definitions for network card in socket 1
esac If you have serveral network cards used for different purposes, one option would be to configure the cards based on socket position, as in:
case "$ADDRESS" in
% vi /etc/pcmcia/wireless.opts If you have only one wireless card,you does not need to use this file,just uses
"config.opts" file. For example:
# Here are a few examples with a few Wireless LANs supported...
# SAMSUNG 11Mbps Wireless LAN Card Using Wireless Extension "iwconfig",you can configure serveral network cards.
# Note : swld11_cs/swldpc11_cs driver only, and version 1.0.4+ for encryption support
*,*,*,*) INFO="SAMSUNG 11Mbps WLAN"
CHANNEL="4"
# Bit rate : auto, 1M, 11M RATE="auto"
ESSID="test3"
# Operation mode : Ad-Hoc, Managed MODE="Managed"
#ESSID (extended network name) : My Network, any
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
# Encryption key : 4567-89AB-CD, s:password 31b7-96 [4]"
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB IWCONFIG="power on"
6) Restart the PCMCIA services.
% /etc/rc.d/init.d/pcmcia restart (in case of Red Hat,Caldera,Mandrake distributions) or KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-
30
% /etc/init.d/pcmcia restart (in case of Debian distributions) or
% /etc/rc.d/rc.pcmcia restart(in cse of Slackware distributions)
% /sbin/init.d/pcmcia restart (in case of Suse distributions) or 7) Extract the Utility distribution archive into local directory. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
% tar xzvf configlinux-0.2.tar.gz 8) Build and install the Uility package.
% cd configlinux-0.2
% ./configure
(if you use the redhat 6.2 or later, please type like this.
% ./configure --with-qt-dir=/usr/lib/qt-1.45)
% make
% make install
% make clean 9) There is a link(configlinux) in the Applications of the KDE menus.
% configlinux or configlinux eth0 10) To use wireless extension,please get the package at. 3. Troubleshooting
When the SAMSUNG 11Mbps PC Card is inserted, the card manager will emit beeps in different tones to indicate success or failure of particular configuration steps. a) Two high beeps
- The card was identified and configured successfully. b) One high beep followed by a low beep
- The card was identified, but could not be configured.
- Examine the system log (dmesg) for PCMCIA error or warning messages. c) One low beep
- The card could not be identified.
- Execute "cardctl ident" to display the adapter PnP information. Verify the PnP information matches an entry in the PCMCIA configuration file (/etc/pcmcia/config).
- Examine the system log (dmesg) for PCMCIA error or warning messages. 31 The SAMSUNG 11Mbps PC Card has one LED that indicate the state of the adapter and network.
* LED(Power/Link Status)
- This LED indicates that power has been applied, and the card is functional. In normal operation mode with Card Power Management disabled, it will be steady-on if the card is connected with a AP and it will be blink slowly if the card in not connected with a AP. With Card Power Management enabled, it will blink rapidly
(several times per second).
* LED blink slowly.
- The adapter was unable to make contact with the named wireless network. Verify the ESSID value,in the config.opts file matches the network name of the access point. 4. MODULE PARAMETERS
irq_list Select IRQ to use
-1 = auto-assign (default) networkmode Select 802.11 Network type 1 = Infrastructure Mode(default) 3 = Ad-hoc Mode Network name (SSID) Sets the independent network name in ad-hoc mode. Sets the desired network (desired SSID) to connect to if using an access point. default is card-configured stationname Station name essid txrate Transmit rate control psmode Power Saving Mode
(! if you enable this mode,there is degradation in the throughput performance.) 0 = disabled(default) wepreq Enables or diabled encryption of Data. 0 = disabled(default) 1 = fixed 1Mbps 2 = fixed 2Mbps 4 = fixed 5.5Mbps 8 = fixed 11Mbps 15 = Fully Auto(default) 1 = enabled 32 3 = 64 bit WEP 7 = 128 bit WEP keyid Designates which of the keys is to be used for the enciphering of data that is transmitted by this action. 0 .. 3(default=0) key0 Specifies one of 4 possible keys for the Data encryption. In case of 128 bit WEP it only supports the keyid 0. One of these keys, identified by keyid,is used for the enciphering of Data that is transmitted by this station. All keys specified can be used for the deciphering of Data that is received. The key value can be an ASCII character string or a hexadecimal value. In case of 64 bit WEP,the length of the key value can be 5 characters or 10 hexadecimal digits and in cse of 128 bit WEP,the length of the key value can be 13 characters or 26 hexadecimal digits. The keys defined in the station must match the keys defined in the access points; both on value and number (0 through 3). Numbers
(ie. key0=12345abcde,or key0=1234567890abcd12345678a4d3) key0=1234567890,or considered integers. are 4 = default Useless if using an access point. valid range: 1-14 (depends on local restrictions) Channel (frequency) for ad-hoc networks. key1 Same as key0. key2 Same as key0. key3 Same as key0. channel threshold Medium reservation (RTS/CTS frame length) fragthresh Defines the number of bytes used for the fragmentation boundary for Sets the number of octets in a message or fragment above which a RTS/CTS handshake is performed. 500 = hidden stations 2347 = no RTS/CTS (default) valid range: 0-2347 directed messages. mtu Maximum transfer unit 1500 = default 2346 = default range: 256-2346 (even numbers only!) 33 pc_debug Selects the PCMCIA debugging level. valid range: 256-2296 0 .. 5 5. WIRELESS EXTENSION
Use "iwconfig" to manipulate wireless extensions. essid Set the nework name of the desired network to connect to (with access point) or the name of your private ad-hoc network. mode Set the operating mode to "Ad-Hoc"or" Managed"(infrastructure mode). In managed mode,the card will try to connected to an Access Point,to get access to the infrastructure. In Ad-Hoc mdoe,the card doesn't require an Access Point and can communicate directly with its peers. channel Channel for ad-hoc networkings.(1~14). rts Set the medium reservation threshold(RTS/CTS frame length), which affets the number of the octes in a message or fragment above which a RTS/CTS handshake is performed. frag Set the number of bytes used for the fragmentation boundary for direced messages. rate Set the rate used for transmission(but not reception). enc Set the encryption key.
(64 bit WEP -> XXXX-XXXX-XX. 128 bit WEP -> XXXX-XXXX-XXXX-XXXX-
XXXX-XXXX-XX). power Set the power saving mode.(on/off) 34
(c) 2000 CO.,Ltd. Copyright SAMSUNG Electro-Mechanics 7.2 Installation procedure of SWL-2000P/2100 PCI Card
* SAMSUNG 11Mbps Wireless LAN PCMCIA device driver for Linux (swldpc11_cs).
http://www.MagicLan.com
* All rights reserved. This file contains general information on the SAMSUNG 11Mbps PC Card, and specific information for the Linux software.
Table of Contents:
1. About the Linux Driver Source/Library distribution 2. Installation 3. Troubleshooting 4. Module parameters
1. About the Linux Driver Source/Library distribution
The distribution archive swld11_cs-1.21.tar.gz contains driver source files. With this software you can build and install a SAMSUNG 11Mbps PC Card driver for your specific Linux kernel. Currently Linux kernel versions 2.0.x through 2.4.x for the Intel architecture are supported. 2. Installation
1) Get David Hinds' PCMCIA package source at http://pcmcia-cs.sourceforge.net/
2) Unpack the PCMCIA package (usually into /usr/src) and change into its directory (usually /usr/src/pcmcia-cs-3.1.*). 3) Extract the SAMSUNG 11Mbps PC Card distribution archive into the standard 35 PCMCIA distribution.
% cd pcmcia-cs-3.1.*
% tar xzvf swldpc11_cs-1.21.tar.gz 4) Build and install the PCMCIA package as normal.
% make config
% make all
% make install 5) Configure the SAMSUNG 11Mbps PC Card. Refer to the PCMCIA documentation for more information (network adapter sections).
% more PCMCIA-HOWTO
% vi /etc/pcmcia/config.opts For example:
a) Attaching to an access point with the network name of
"Magiclan", enter the following in the config.opts file:
module "swld11_cs" opts "essid=Magiclan"
b) Ad-Hoc (peer-to-peer) network without an access point, enter the following in the config.opts file:
module "swld11_cs" opts "networkmode=3"
c) Attach to an access point with the network name of "Ocean", and export the station name as "magiclan", enter the following in the config.opts file:
module "swld11_cs" opts "essid=Ocean stationname=magiclan"
% vi /etc/pcmcia/network.opts Modify the network options for your adapter. The parameters need to be correct for the connected network. Check with your system administrator for the correct network information. Refer to the PCMCIA-HOWTO for more configuration information. For example:
*,*,*,*) IF_PORT=""
BOOTP="n"
IPADDR="10.0.0.5"
NETMASK="255.255.255.0"
NETWORK="10.0.0.0"
BROADCAST="10.0.0.255"
GATEWAY="10.0.0.1"
36 Using Wireless Extension "iwconfig",you can configure serveral network cards. DOMAIN="domain.org"
DNS_1="dns1.domain.org"
*,0,*,*)
# definitions for network card in socket 0
*,1,*,*)
# definitions for network card in socket 1
esac If you have serveral network cards used for different purposes, one option would be to configure the cards based on socket position, as in:
case "$ADDRESS" in
% vi /etc/pcmcia/wireless.opts If you have only one wireless card,you does not need to use this file,just uses
"config.opts" file. For example:
# Here are a few examples with a few Wireless LANs supported...
# SAMSUNG 11Mbps Wireless LAN Card
#ESSID (extended network name) : My Network, any
# Operation mode : Ad-Hoc, Managed
# Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency)
# Bit rate : auto, 1M, 11M
# Encryption key : 4567-89AB-CD, s:password
*,*,*,*) INFO="SAMSUNG 11Mbps WLAN"
MODE="Managed"
CHANNEL="4"
ESSID="test3"
RATE="auto"
KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-
31b7-96 [4]"
# Other iwconfig parameters : power off, ap 01:23:45:67:89:AB 37
# Note : swld11_cs/swldpc11_cs driver only, and version 1.0.4+ for encryption support
IWCONFIG="power on"
6) Restart the PCMCIA services.
% /etc/rc.d/init.d/pcmcia restart 7) Extract the Utility distribution archive into local directory.
% tar xzvf configlinux-0.2.tar.gz 8) Build and install the Uility package.
% cd configlinux-0.2
% ./configure
(if you use the redhat 6.2 or later, please type like this.
% ./configure --with-qt-dir=/usr/lib/qt-1.45)
% make
% make install
% make clean 9) There is a link(configlinux) in the Applications of the KDE menus.
% configlinux or configlinux eth0 10) To use wireless extension,please get the package at. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html 3. Troubleshooting
When the SAMSUNG 11Mbps PC Card is inserted, the card manager will emit beeps in different tones to indicate success or failure of particular configuration steps. a) Two high beeps
- The card was identified and configured successfully. b) One high beep followed by a low beep
- The card was identified, but could not be configured.
- Examine the system log (dmesg) for PCMCIA error or warning messages. c) One low beep
- The card could not be identified.
- Execute "cardctl ident" to display the adapter PnP information. 38 Verify the PnP information matches an entry in the PCMCIA configuration file (/etc/pcmcia/config).
- Examine the system log (dmesg) for PCMCIA error or warning messages. The SAMSUNG 11Mbps PC Card has one LED that indicate the state of the adapter and network.
* LED(Power/Link Status)
- This LED indicates that power has been applied, and the card is functional. In normal operation mode with Card Power Management disabled, it will be steady-on if the card is connected with a AP and it will be blink slowly if the card in not connected with a AP. With Card Power Management enabled, it will blink rapidly
(several times per second).
* LED blink slowly.
- The adapter was unable to make contact with the named wireless network. Verify the ESSID value,in the config.opts file matches the network name of the access point. 4. MODULE PARAMETERS
networkmode Select 802.11 Network type 1 = Infrastructure Mode(default) 3 = Ad-hoc Mode Network name (SSID) Sets the independent network name in ad-hoc mode. Sets the desired network (desired SSID) to connect to if using an access point. default is card-configured stationname Station name essid txrate Transmit rate control psmode Power Saving Mode
(!if you enable this mode,there is degradation in the throughput 1 = fixed 1Mbps 2 = fixed 2Mbps 4 = fixed 5.5Mbps 8 = fixed 11Mbps 15 = Fully Auto(default) 39 performance.) 1 = enabled 0 = disabled(default) wepreq Enables or disabled encryption of Data. 0 = disabled (default) 3 = 64 bit WEP 7 = 128 bit WEP keyid Designates which of the keys is to be used for the enciphering of data that is transmitted by this action. In case of 128 bit WEP it only supports the keyid 0. 0 .. 3(default=0) key0 Specifies one of 4 possible keys for the Data encryption. One of these keys, identified by keyid,is used for the enciphering of Data that is transmitted by this station. All keys specified can be used for the deciphering of Data that is received. The key value can be an ASCII character string or a hexadecimal value. In case of 64 bit WEP,the length of the key value can be 5 characters or 10 hexadecimal digits and in cse of 128 bit WEP,the length of the key value can be 13 characters or 26 hexadecimal digits. The keys defined in the station must match the keys defined in the access points; both on value and number (0 through 3). Numbers are considered integers.
(ie.key0=1234567890,orkey0=12345abcde,orkey0=1234567890abcd12345678a4d3). key1 Same as key0. key2 Same as key0. key3 Same as key0. channel threshold Medium reservation (RTS/CTS frame length) fragthresh Sets the number of octets in a message or fragment above which a RTS/CTS handshake is performed. 500 = hidden stations 2347 = no RTS/CTS (default) valid range: 0-2347 Defines the number of bytes used for the Channel (frequency) for ad-hoc networks. 4 = default Useless if using an access point. valid range: 1-13 (depends on local restrictions) 40 fragmentation boundary for directed messages. 2346 = default range: 256-2346 (even numbers only!) Maximum transfer unit 1500 = default valid range: 256-2296 mtu pc_debug Selects the PCMCIA debugging level. 0 .. 5 5. WIRELESS EXTENSION
Use "iwconfig" to manipulate wireless extensions. essid Set the nework name of the desired network to connect to (with access point) or the name of your private ad-hoc network. mode Set the operating mode to "Ad-Hoc"or" Managed"(infrastructure mode). In managed mode,the card will try to connected to an Access Point,to get access to the infrastructure. In Ad-Hoc mdoe,the card doesn't require an Access Point and can communicate directly with its peers. channel Channel for ad-hoc networkings.(1~13). rts Set the medium reservation threshold(RTS/CTS frame length), which affets the number of the octes in a message or fragment above which a RTS/CTS handshake is performed. frag Set the number of bytes used for the fragmentation boundary for direced messages. rate Set the rate used for transmission(but not reception). enc Set the encryption key.
(64 bit WEP -> XXXX-XXXX-XX. 128 bit WEP -> XXXX-XXXX-XXXX-XXXX-
XXXX-XXXX-XX). power Set the power saving mode.(on/off) 41 8. The Program for setting Magic LAN 8.1 The concept of Profile
- TCP/IP settings for the fixed networks/Wired LAN have no problems, as they do not deal with the mobility. But in case of mobile equipments such as WLAN card, when WLAN client has moved from home to Office or vice-versa, the difficulty for using the old TCP/IP settings arises.
- The concept of profile makes it easy to use the same TCP/IP settings for WLAN cards regardless of the movement.
- Profile can be selected again with ease if it were saved. Saving the settings for WLAN and TCP/IP as a Profile, it is easy for user to select and use one of the saved profiles, especially, it can be used quickly without rebooting your computer while the settings for TCP/IP is updated. 42 8.2 Installation Procedure First time use of WLAN on your computer needs the following settings. 1. Insert your WLAN card. After clicking on the icon, which is found at the right bottom your computer screen, Please create your first network profile now window will appear. Click Y button for yes and the following window will appear. 2. Input a profile name in Profile Name and description for your profile name in Description and click the NEXT button, the following window will appear. 43 3. Select the Operating Mode to use and click the NEXT button. Default operating mode is Infrastructure.
- Infrastructure Network is the structure that the communication between Wired LAN and Wireless LAN is feasible. Wireless client is possible to access to the other Network (include Internet) via Access Point.
- Ad-hoc/802.11Ad-hoc Network support the communication among Wireless clients. Due to the support of communication among Wireless equipment, Ad-hoc Network doesnt need Access Point. (cf. 802.11 ad-hoc is satisfied with the 802.11 specification) 44 4. Enter the SSID (Max 32 characters) of AP to be used in SSID. If you are not sure which SSID to use, click on Survey and refer to 4.1. Select the TX Rate for your WLAN card and click the Next button. 4-1. If you clicked on the Survey, the above window will appear showing you Access Points or Stations (Ad hoc) that are able to connect now. Select the AP that has the highest signal to use as an SSID. 45 5. Select the WEP Mode and Click the Next button.
- WEP Mode
!"This is security tool to protect your DATA from unauthorized users.
!"To use the function of WEP, The WEP key settings for client must be same to that of AP in the Infrastructure Mode, and the WEP key settings must be same for all clients in the Ad-hoc/802.11Ad-hoc Mode. 46 6. Enter a valid IP address. IP address can be allocated automatically. (cf. it is limited to users who use the DHCP server or ADSL connection). As only checked in Manage TCP/IP together with Profile, IP address can be controlled in the Profile. This menu does not appear under MS Windows NT. Click NEXT to see the following window. 7. Showing you the settings selected so far. Click the Finish button. Check on this box. It will work on the system after clicking the Finish button. 47 8. Click the Profile name shown in the above window click the Apply button. The settings will be over. If the IP address entered in the system settings is different than the IP address selected under profile name, system IP settings will be changed without rebooting your system. 48 9. The main configuration of Program During the installation of your SAMSUNG WLAN Card, configuration utility is also installed. You can see the icon at the right bottom of your screen. Double clicking that icon will show you the screen as shown below. The following describes the meanings of variables shown in the WLAN configuration. Profile: The arbitrary designation by user. It is the profile name to distinguish each Profile. So when you set the Profile, you would better choose the name that can send the contents it has. Link Status: Link Status shows you a client connection state with AP (In Infrastructure mode) or with other clients (In 802.11Ad-hoc Mode). SSID: It represents the name of a group consisting of WLAN users only. It is also called ESSID. Operating Mode: There are three Modes. Infrastructure Mode (the connection among clients through an AP), 802.11Ad-hoc/Ad-hoc Mode (direct connection among clients) BSSID: It shows the Physical Address of WLAN card inserted in AP in the Infrastructure Mode and the Random Generation value in the 802.11 Ad-hoc Mode. Channel: It shows channel number in use for communication between AP and client or among clients. When the Network Mode is set to the Infrastructure or 802.11Ad-hoc Modes, it searches a 49 channel automatically. But when the Network Mode is set to the Ad-hoc, all clients must use he same channel to communicate with each other. WEP: Security tool to be used for encryption/decryption of data to be exchanged between clients or between clients and AP. It denies the authorized access to network if WEP is enabled. Power Saving: The Power Saving Mode that prolongs the life of battery. Physical Address: It is the Physical address of WLAN card being used by user. This is also the MAC address of the WLAN card. IP Address: Address used to send data from one computer to another to create the network of several computers. IP address is unique for every network card installed on a computer to identify it from other computers. Subnet Mask: It is an address that enables along with an IP Address to share a network Address within the LAN of company. Gateway: The network point playing a role as a gateway to enter the other network. DNS: It is the system that transforms the name of an Internet domain to the corresponding IP Address. IP Address is actually needed to locate a computer/server on the Internet. Adapter Name: It shows the kind of WLAN card that the user is using now. 50 The following description is the fundamental installation of WLAN Card. (It is operated by four buttons on the bottom of Utility) 9.1 Profile 9.1.1 The New button Clicking the New button, you can add or make a new Profile.
(Refer to The Program for setting Magic LAN in the Chapter 8) 9.1.2 The Apply button Select and click a Profile to be used, then the saved or modified profile settings will be used for configuring your WLAN card. 9.1.3 The Edit button Clicking the Edit button or the Profile name that was created previously, you can modify that Profile. 51
- Click the WEP button to set the security. 1. First of all, select the 64 bit. 2. Input a certain value (ex. test1 etc) in the Passphrase and click the Generate button. Then it will make four values of keys automatically. 3. Then you set the same value to the WEP of AP. (cf. If you use the WLAN made from other company, you must set the same values in the four keys) 52
- You can set the Power Saving and Threshold with clicking the Advanced button. 1. Power Saving Mode saves the Battery. (cf.. it can give a lowing of efficiency according to 802.11Specification) 2. RTS/CTS Threshold Mode is better used in the place surrounded with much RF interference.
- Click the TCP/IP to input the IP directly or receive IP automatically. 9.1.4 The Delete button Select a profile and click on Delete button to remove that profile. 53 9.2 Status 9.2.1 The Current Status button It shows the current state of the WLAN card. (Refer to the The main configuration of Program) 54 9.2.2 The AP Status button It shows the current state of AP. (You can see the IP address changed by the Get Status button) Model: It shows the name of model. Version: It shows the version of AP. Description: It is the name of AP designated by AP manager during AP setup. NAT: It shows whether the private IP address (NAT server) is enabled or not. DHCP: It shows whether the DHCP sever is enabled or not. Clients number: It shows the number of users currently connected with the AP. Internet connection: It is the connection type with outer network (LAN, ADSL, ISDN etc.). IP Address: It shows whether the IP address is from DHCP server or NAT server. Connected Status: In case the connection type with the outside network is of ADSL/CABLE type, it shows the connection state between AP and ASP service. IP: It is the IP address of the AP. 55 9.2.3 The Site Survey button It finds you the AP/Station that are connected currently. (It takes a few seconds to be done) Signal: It shows the connection state of Stations with AP or Master Station. Rate: It shows the Tx Data rates. WEP: It shows security state with the AP. BSSID: It represents the Physical Address of AP in the Infrastructure Mode and the Random Generation value in the 802.11 Ad-hoc Mode. Channel: It shows the currently used channel number. 9.2.4 Statistics It shows the state of the data transmission. (You can regulate the graph to be see clearly with the settings of the MAX bps on the right side of bottom) 56 9.3 General Settings 9.3.1 The DHCP button
- It works when it is enabled.
- The Get Status button shows the updated information obtained from the DHCP server.
- The Release DHCP button releases the IP Address that was received from the DHCP server.
- The Renew DHCP button is for receiving the IP Address from the DHCP server. 9.3.2 The Options button
- If you disable the check from the Sound Enable, you cannot hear the sound whenever you click.
- If you disable check from the Manage TCP/IP together with profiles, you cannot control TCP/IP in the utility. You can just modify TCP/IP in the Network Neighborhood.
- If you check the Do not show the Profile Wizard Welcome message, Welcome message does not pop up in case of set or add the Profile. 57 9.4 Version
- You can see the Driver and Firmware version for your WLAN card currently in use.
- Click the Website to get more information about WLAN. 58 10. Troubleshooting To make the installation of SAMSUNG WLAN Card more users friendly, we have suggested following the installation steps one by one as listed in the section 3 and section 4. Still you encounter some problems while installing the WLAN Card or you want to confirm whether your card is installed properly or not, we have listed the procedure for checking the various components after you have installed the card. In first part of Troubleshooting, we have suggested the users to check the various properties of the card to check the proper installation. In second section, we have listed the various problems that you may encounter during the installation and have also listed the possible solution. Check the first part to guess the probable reason of unsuccessful installation. 10.1 Procedure to Check the Various Properties of Card after Installation:
For PC Card under Windows 95 (OSR2)/98:
Please check the followings if you encounter some problem while installing the PC card or your PC card is non-functional. 1. Click on the Control Panel and then on PC Card. Check whether it has PC Card in one of the sockets or not. If you find SAMSUNG 11Mbps WLAN PC Card in one of the sockets, it means the card is detected properly. If you see the Yellow sign of Question-mark (?), the resources are conflicting. 2. Right click on My Computer and the select Properties. Select the Device Manager and click on the Network Adapter. You will find SAMSUNG 11Mbps WLAN PC Card 3V/5V if it is installed successfully. If you see the Yellow sign the resources are conflicting. Click on PC Card and then on PC Card Service, you can see the status of PC Card. If there are yellow sign either on adapter or PC Card, please check the followings. i) ii) Check if your Notebook supports 3.3V Card. Check if your Notebook has a free IRQ. If not, make an IRQ 59 free by assigning the same IRQ to some devices, for example COM 1, COM 2 can be assigned same IRQ values. Check that you have inserted the right card and have installed the proper driver. iii) For PC Card under Windows 95/98:
Please check the following if you encounter some problem while installing the PC Card or your PCI card is non-functional. 1. Click on the Control Panel and then on PC Card. Check whether it has PCI card in one of the sockets or not. If you find SAMSUNG 11Mbps WLAN PCI Card in one of the sockets, it means the card is detected properly. If you see the Yellow sign of Question-mark (?), the resources are conflicting. 2. Right click on My Computer and the select Properties. Select the Device Manager and click on the Network Adapter. You will find SAMSUNG 11Mbps WLAN PCI Card if it is installed successfully. If you see the yellow sign the resources are conflicting. Click on PC Card Socket and then you can see the PCI/PC Card. If there are Yellow signs either on PC Card or PCI card, please check the followings. i) ii) Check that you have installed the proper driver. If the above i) and ii) are already checked and are set properly, uninstall the driver, remove the PCI card and reinstall the driver. For PC Card under Windows NT:
Important: Some notebook computers for Win NT 4.0 operating system that do not support 3V cards will not install your PC Card successfully. You are advised to install the driver for PC Card Controller available from set manufactures or install the CardWizard program that will enable the notebook computers supporting 5V cards to support 3V cards also and will install your PC Card successfully. 60 Please check the followings if you encounter some problem while installing the PC Card or your PC Card is non-functional. 1. Check the Windows NT Diagnostics. You should find out whether there is any conflict in the resource allocation or the I/O address, IRQ allocations. If you find that the IRQ,I/O addresses are already assigned to some other devices, you must change that value. I/O address needs 40h byte length. 2. Event viewer will show you about the events such as PC Card, swld11 (driver name) and the status. If you find the Red or Yellow sign, there is some problem. Please refer to the Troubleshooting at the end of the manual. 3. Click on the Control panel. Double click on the PC Card. You will see SAMSUNG 11Mbps WLAN Card. Double clicking on that will show you the Card Information, driver name and the driver file. You must confirm the name of the driver and the driver file as swld11 and swld11.sys. If you do not find the names as we listed before, there are some problems and the driver is not installed properly. Reinstall the driver. Note: Check the PnP BIOS setup menu and select no in case of the WLAN Card installation. For PCI Card under Windows NT:
Please check the following if you encounter some problem while installing the PC Card or your PCI card is non-functional. 1. Check the Windows NT Diagnostics. You should find out whether there is any conflict in the Resource allocation or the I/O Base address allocation. If you find that the I/O port address is already assigned to some other devices, you must change that. 2. Event Viewer will show you about the events such as PC Card type i.e. PC Card or PCI, driver file swldpc11 and the status. If you find the Red or Yellow sign, there is some problem. 3. Click on the Control panel. Double click on the PC Card. You will see 61 SAMSUNG 11Mbps WLAN PCI Card. Double clicking on that will show you the Card Information, driver name and the driver file. You must confirm the name of the driver and the driver file as swld11 and swld11.sys. If you do not find the names as we listed before, there is some problems and the driver is not installed properly. Reinstall the driver. 10.2 Probable Symptoms and their Diagnosis:
This section lists the problems you may encounter during the installation of your PCI or PC Card. Solving Problems. Symptom The system tray wireless monitor is always red. Diagnosis Make sure that all the clients have the same SSID. Set all clients to the same wireless channel in case of Ad-hoc network mode. Make it sure that you are with in the range of an Access Point (AP). If your PC cant be associated with any AP, it cannot communicate with other clients. If you cannot connect to one of the clients in the Make it sure that all clients are up and are running network. with a blue taskbar icon. Make it sure that the client that you want to communicate with is within the range of an AP. Make sure that your TCP/IP is set properly and correctly. The NT event log lists the error: Server Service Reinstall the Windows NT service pack. terminated. Not enough Server Storage. 62 In Windows NT, there is no wireless monitor icon in the taskbar or the Samsung Adapter does not appear in the PC Card Control Panel applet. Make sure the PC Card device is started as Automatic in the device applet of the Control Panel. Double click on the PC Card icon in Control Panel. Click on Samsung Adapter and then on the properties button. It should say the driver started correctly. Make sure the drivers were installed correctly. If all else fails, uninstall drivers and software through Add/Remove Program, remove the WLAN Card and reinstall the drivers following the manual. You cannot connect to some computers in the Make sure a resource is shared among all computers Network Neighborhood. connected to the same network. In case of the Windows NT, if there is no sound after you insert the Wireless LAN card. Click on OK on the MS Networking login box and OK on the following domain error. If you cannot share a device in NT, you may need to reinstall the NT service pack. You may wait for several minutes for all of the PCs to appear. You must check the resources of the sound card driver. If the resources are conflicting with Samsung Wireless (PCI/PC Card) LAN Card driver, you must change the resources. 63
1 | Pages to be added | Users Manual | 19.31 KiB | July 08 2001 / June 08 2001 |
Tested to Comply FOR HOME OR OFFICE USE Samsung Electro-Mechanics MagicLAN SWL-2100U Notice 2 The SWL-2100U complies with Part 15 of the FCC rules. Operation is subject to the following two conditions;
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. WARNING While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW/cm2 may be exceeded at distances close to the antennas installed. Therefore, the user must maintain a minimum distance of 20 cm from the antenna. Note: The SWL-2100U has been tested and found to comply with the limits for a Class B digital device and a low power transmitter, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to resolve the problem by one or more of the following measures;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an output on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. 3 Important Safety Information
! Read these simple guidelines. Breaking the rules may be dangerous or illegal. SAMSUNG is not responsible for any damages caused by breaking the rules.
! Wireless LAN Card described in this document is approved for use in a wireless local area network.
! Remember to make backup copies of important data.
! When you are transferring data, keep your laptop computer stationary. Roaming between access points may break the connection.
! Only qualified service personnel must repair the equipment.
! All wireless devices may get interference, which could affect performance.
! Use approved accessories only. Do not connect incompatible products.
! Use only accessories approved by the wireless LAN Card manufacturer for use with this particular wireless LAN Card. The use of any other types will invalidate any approval or warranty applying to the wireless LAN Card, and may be dangerous,
! Use only the region setting appropriate for the area where the wireless LAN Card is used at the present time. Using the card in any other region or with an incorrect region setting is prohibited and may be illegal.
! Operation of any radio transmitting equipment, including a wireless LAN Card, may interference with the functionality of inadequately protected medical devices.
! Do not use the wireless LAN Card on aircraft.
! Do not use the wireless LAN Card at a refueling point.
! Do not use the wireless LAN Card near fuel or chemicals.
! Do not use the wireless LAN Card where blasting is in progress.
! Do not use the wireless LAN Card when the use of wireless device may cause interference or danger.
! Do not use the wireless LAN Card where the use of cellular terminals is prohibited. 4
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-08-06 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2001-08-06
|
||||
1 | Applicant's complete, legal business name |
Samsung Electro Mechanics
|
||||
1 | FCC Registration Number (FRN) |
0023166085
|
||||
1 | Physical Address |
314 Maetan-3 Dong Pal Dal-Ku
|
||||
1 |
Suwon City, N/A 442-743
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@americanTCB.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
E2X
|
||||
1 | Equipment Product Code |
SWL-2100U
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** L********
|
||||
1 | Title |
Assistant Manager
|
||||
1 | Telephone Number |
9-011********
|
||||
1 | Fax Number |
9-011********
|
||||
1 |
b******@samsung.co.kr
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Rhein Tech Laboratories
|
||||
1 | Name |
D******** F****
|
||||
1 | Physical Address |
360 Herndon Parkway
|
||||
1 |
Herndon, Virginia 20170
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
703 6********
|
||||
1 | Fax Number |
703 6********
|
||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless LAN Card | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Rhein Tech Laboratories, Inc.
|
||||
1 | Name |
R******** M****
|
||||
1 | Telephone Number |
703-6********
|
||||
1 | Fax Number |
703-6********
|
||||
1 |
F******@rheintech.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0280000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC