Bluetooth Tripod Selfstick EN Bluetooth Tripod Selfstick User Manual Produ ct Descrip tio n 2 3 7 1 4 5 6 8 1. Upper Fixator 2. Phone Holder 3. Lower Fixator 4. Rotational Axis 5. Extendable Stick 6. Remote Control Indicator 7. Capture Button 8. Tripod User Manual Contents Bluetooth Tripod Selfstick*1 User Manual*1 How to Use it EN EN How to Replace Battery Take the remote control from the sele stick, push the rear cover at the direction of the arrow, and take off the rear cover for battery replacement. 1. Extend the sele stick to the proper length and start to take seles. How to Take off the Phone Warnings EN 1. Watch your hands during use. 2. The product is not designed for children under 14 years old. Do not swallow it. 3. Do not dismantle or modify the product. 4. Do not store the product in a humid environment. 5. Keep the product away from heat sources. 6. Do not expose the product to water or other liquids in case of damage. How to Install it 1. Insert the phone into the lower xator slantwise. 2. Pull the upper xator up to snap the phone into the holder. EN Quick Guide 1. Press and hold the Capture Button for 2 seconds to power on. Enable the Bluetooth on the mobile phone to start searching and click ITFIT Sele P007 on the searched device list. The green indicator will go off after successful connection. 2. Go to Camera App mode and start to take seles. User Notes Remote Control Take the remote control from the sele stick for long-distance photographing. Press the Capture Button to take a photo or record a video (
under the REC mode). Tripod Unfold the tripod in the bottom, push the extendable stick up and place the tripod on a at surface. Power Off Press and hold the Capture Button for 3 seconds and the green indicator will ash for 3 times before going off. Preventive Measure Do not move the phone by force after its clamped in case of damage to the phone shell. Reminders 1. In case of no operation within 3 minutes after Bluetooth is connected, the sele stick will automatically enter the Sleep Mode. Press the Capture Button again to restore connection. In the event of no operation after 6 hours in the Sleep Mode, the sele stick will automatically power off. 2. In case of low battery during the use of the sele stick, the indicator will turn red and ash. Please replace the battery in a timely manner. EN Product Specifications Product Name Model No Rated Voltage Place of Origin Weight Materials Length of Storage Battery Capacity Product operating temperature range Bluetooth Tripod Selfstick ITFIT Sele P007 3V China 142g ABS+ Aluminum Alloy 207mm 75mAh
-20~+53 Barrier-free Operation within 10 Meters 2. Unfold the tripod, push the extendable stick up and place the tripod on a at surface. Start to take seles. 1. Hold the phone with one hand and pull the upper xator up. 2. Slide the phone out. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or changes to this equipment. Such modications or changes could void the users authority to operate the equipment. Manufacturer:Winners' Sun Plastic & Electronics (Shenzhen) Co., Ltd. Address: 1/F-4/F of Factory 6 & 3/F of Factory 2, Detai Industrial Park, 496 Huarong Road, Langkou Community, Dalang Sub-
district, Longhua District, Shenzhen Guangdong, China Copyright@2020 ITFIT All rights reserved Made in China 56*100mm 80g