FCC ID: ZCASMA025M Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN

Package contents Device USB cable Quick start guide Ejection pin USB power adaptor The items supplied with the device and their images may vary by region. Device layout To turn on the device, press and hold the Side key for a few seconds. Volume key Side key Front camera SIM card /

Memory card tray Multipurpose jack (USB Type-C) Rear camera The charger should remain close to the electric socket and easily accessible while charging. Installing a nano-SIM card Nano-SIM cards are sold separately. Support for single SIM and dual SIM models may vary by region. Single SIM models:

1 1 2 2 Nano-SIM card Dual SIM models:

3 3 Nano-SIM card 2 Nano-SIM card 1 Safety information Read all safety information before using the device to ensure safe and proper use. You can view more safety information in the safety information menu of the Settings app. Warning Follow the warnings below to prevent incidents, such as fires or explosions, injuries, or damage to the device Do not expose the device to physical impact or damage. Use only Samsung-approved batteries, chargers, and cables specifically designed for your device. Prevent the multipurpose jack and battery terminals from coming into contact with foreign materials such as metal, liquids, or dust. If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately. Use the device again only after it has been repaired at a Samsung Service Center. Do not turn on or use the device when the battery compartment is exposed. Do not disassemble or reuse the battery. Do not allow children or animals to chew or suck the device. The device can be used in locations with an ambient temperature of 0 C to 35 C. You can store the device at an ambient temperature of -20 C to 50 C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the batterys lifespan. Do not use your device in a hot environment or near fire. Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. You can download and install the firmware update to upgrade your devices software with the firmware over-the-air (FOTA) service. To check for the firmware update, launch the Settings app and tap Software update Download and install. Specific Absorption Rate (SAR) certification information Your device conforms to U.S. Federal Communications Commission

(FCC) standards that limit human exposure to radio frequency (RF) energy emitted by radio and telecommunications equipment. These standards prevent the sale of mobile devices that exceed a maximum exposure level (known as the Specific Absorption Rate, or SAR) of 1.6 W/kg. In normal use, the actual SAR is likely to be much lower, as the device has been designed to emit only the RF energy necessary to transmit a signal to the nearest base station. By automatically emitting lower levels when possible, your device reduces your overall exposure to RF energy. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. Some devices are required to receive approval from the FCC. If your device required FCC approval, you can view the FCC certification by opening Settings About phone Status. SAR information for this and other devices can be found on the FCC website at: www.fcc.gov/oet/ea/. Follow the instructions on the website to use the FCC ID to find SAR values for the device. SAR information for this device can also be found on Samsungs website: www.samsung.com/sar. If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it. The actual available capacity of the internal memory is less than the specified capacity because the operating system and default apps occupy part of the memory. The available capacity may change when you upgrade the device. It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages

(screen burn-in) or ghosting. To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help. Responsible party - U.S. Contact Information Samsung Electronics America, Inc. QA Lab America 19 Chapin Rd. Building D, Pine Brook NJ 07058 Tel:

1-973-808-6375 Fax: 1-973-808-6361 FCC Notice The device may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the mobile device if such interference cannot be eliminated. Information about the RF exposure from FCC In August 1996, the Federal Communications Commission

(FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both international and U.S. standards. The design of this phone complies with FCC guidelines and these international standards. Body effects For body operation, this device has been tested and meets FCC RF exposure guidelines when used with any accessory that contains no metal and which provides a minimum separation distance of 15mm between this device and the body of the user. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Class B Compliance under article 15 of the FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Some content may differ from your device depending on the region, service provider, or software version, and is subject to change without prior notice. Copyright 2020 Samsung Electronics Co., Ltd. QUICK START GUIDE SM-A025M SM-A025M/DS Visit www.samsung.com to view device information, the user manual, and more. You may incur additional charges for accessing the Internet. Printed in Korea JM20-A025-B001 Rev.1.0 English (LTN). 10/2020

USER MANUAL SM-A025M SM-A025M/DS English. 11/2020. Rev.1.0 www.samsung.com Table of Contents Basics 4 6 Read me first Device overheating situations and solutions Device layout and functions 9 13 Charging the battery 15 SIM or USIM card (nano-SIM card) 17 Memory card (microSD card) 19 Turning the device on and off 20 Initial setup 20 Samsung account 21 Transferring data from your previous device (Smart Switch) 23 Understanding the screen 30 Notification panel 32 Entering text Installing or uninstalling apps Internet Apps and features 35 36 Phone 39 Contacts 41 Messages 42 43 Email 44 Camera 51 Gallery 55 Multi window 56 Samsung Notes 57 Samsung Members 57 Calendar 58 Reminder 59 Radio 60 Voice Recorder 60 My Files 60 Clock 60 Calculator 61 Sharing content 62 Smart View 63 Samsung Global Goals 63 Google apps 2 84 Digital Wellbeing and parental controls 84 Device care 84 Optimising your device 85 Battery 85 Storage 86 Memory 86 Security 86 Ultra data saving 86 Apps 87 General management 88 Accessibility 88 Software update 89 About phone Appendix 90 Troubleshooting 95 Removing the battery Table of Contents Settings 64 Introduction 64 Connections 65 Wi-Fi 67 Bluetooth 68 NFC and payment (NFC-enabled models) 70 Data saver 70 Mobile data only apps 70 Mobile Hotspot 71 More connection settings 72 Sounds and vibration 73 Sound quality and effects 73 Separate app sound 73 Notifications 74 Display 75 Wallpaper 75 Themes 75 Lock screen 76 Smart Lock 76 Biometrics and security 77 Face recognition 79 Privacy 80 Location 80 Accounts and backup 81 Samsung Cloud 82 Google 82 Advanced features 83 Motions and gestures 83 Dual Messenger 3 Basics Read me first Please read this manual before using the device to ensure safe and proper use. Descriptions are based on the devices default settings. Some content may differ from your device depending on the region, service provider, model specifications, or devices software. The device may require a connection to a Wi-Fi or mobile network when using some apps or features. Content (high quality content) that requires high CPU and RAM usage will affect the overall performance of the device. Apps related to the content may not work properly depending on the devices specifications and the environment that it is used in. Samsung is not liable for performance issues caused by apps supplied by providers other than Samsung. Samsung is not liable for performance issues or incompatibilities caused by edited registry settings or modified operating system software. Attempting to customise the operating system may cause the device or apps to work improperly. Software, sound sources, wallpapers, images, and other media provided with this device are licensed for limited use. Extracting and using these materials for commercial or other purposes is an infringement of copyright laws. Users are entirely responsible for illegal use of media. You may incur additional charges for data services, such as messaging, uploading and downloading, auto-syncing, or using location services depending on your data plan. For large data transfers, it is recommended to use the Wi-Fi feature. Default apps that come with the device are subject to updates and may no longer be supported without prior notice. If you have questions about an app provided with the device, contact a Samsung Service Centre. For user-installed apps, contact service providers. Modifying the devices operating system or installing softwares from unofficial sources may result in device malfunctions and data corruption or loss. These actions are violations of your Samsung licence agreement and will void your warranty. 4 Basics Depending on the region or service provider, a screen protector is attached for protection during production and distribution. Damage to the attached screen protector is not covered by the warranty. You can see the touchscreen clearly even in strong outdoor sunlight by automatically adjusting the contrast range based on the surrounding environment. Due to the nature of the product, displaying fixed graphics for extended periods may result in afterimages

(screen burn-in) or ghosting. It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods and turn off the touchscreen when not using the device. You can set the touchscreen to turn off automatically when you are not using it. Launch the Settings app, tap Display Screen timeout, and then select the length of time you want the device to wait before turning off the touchscreen. To set the touchscreen to automatically adjust its brightness based on the surrounding environment, launch the Settings app, tap Display, and then tap the Adaptive brightness switch to activate it. Depending on the region or model, some devices are required to receive approval from the Federal Communications Commission (FCC). If your device is approved by the FCC, you can view the FCC ID of the device. To view the FCC ID, launch the Settings app and tap About phone Status. If your device does not have an FCC ID, it means that the device has not been authorised for sale in the U.S. or its territories and may only be brought to the U.S. for the owners personal use. The use of mobile devices on aeroplanes or ships may be subject to federal and local guidelines and restrictions. Check with the appropriate authorities and always follow crew instructions regarding when and how you may use your device. Depending on the region, you can view the regulatory information on the device. To view the information, launch the Settings app and tap About phone Regulatory information. Instructional icons Warning: situations that could cause injury to yourself or others Caution: situations that could cause damage to your device or other equipment Notice: notes, usage tips, or additional information 5 Basics Device overheating situations and solutions When the device heats up while charging the battery While charging, the device and the charger may become hot. During wireless charging or fast charging, the device may feel hotter to the touch. This does not affect the devices lifespan or performance and is in the devices normal range of operation. If the battery becomes too hot, the charging speed may decrease or the charger may stop charging. Do the following when the device heats up:

Disconnect the charger from the device and close any running apps. Wait for the device to cool down and then begin charging the device again. If the lower part of the device overheats, it could be because the connected USB cable is damaged. Replace the damaged USB cable with a new Samsung-approved one. When using a wireless charger, do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the device and the wireless charger. The wireless charging or fast charging feature is only available on supported models. When the device heats up during use When you use features or apps that require more power or use them for extended periods, your device may temporarily heat up due to increased battery consumption. Close any running apps and do not use the device for a while. The following are examples of situations in which the device may overheat. Depending on the functions and apps you use, these examples may not apply to your model. During the initial setup after purchase or when restoring data When downloading large files 6 Basics When using apps that require more power or using apps for extended periods When playing high-quality games for extended periods When recording videos for extended periods When streaming videos while using the maximum brightness setting When connecting to a TV While multitasking (or, when running many apps in the background) When using Multi window When updating or installing apps while recording videos When downloading large files during a video call When recording videos while using a navigation app When using large amount of data for syncing with the cloud, email, or other accounts When using a navigation app in a car while the device is placed in direct sunlight When using the mobile hotspot and tethering feature When using the device in areas with weak signals or no reception When charging the battery with a damaged USB cable When the devices multipurpose jack is damaged or exposed to foreign materials, such as liquid, dust, metal powder, and pencil lead When you are roaming Do the following when the device heats up:

Keep the device updated with the latest software. Conflicts between running apps may cause the device to heat up. Restart the device. Deactivate the Wi-Fi, GPS, and Bluetooth features when not using them. Close apps that increase battery consumption or that run in the background when not in use. Delete unnecessary files or unused apps. Decrease the screen brightness. If the device overheats or feels hot for a prolonged period, do not use it for a while. If the device continues to overheat, contact a Samsung Service Centre. 7 Basics Precautions for device overheating If you begin to feel uncomfortable due to the device overheating, stop using the device. When the device heats up, the features and performance may be limited or the device may turn off to cool down. The feature is only available on supported models. If the device overheats and reaches a certain temperature, a warning message will appear to prevent device failure, skin irritations and damages, and battery leakage. To lower the devices temperature, the screen brightness and the performance speed will be limited and battery charging will stop. Running apps will be closed and all calling and other features will be limited, except for emergency calls, until the device cools down. If the second message appears due to a further increase of the devices temperature, the device will turn off. Do not use the device until the devices temperature drops below the specified level. If the second warning message appears during an emergency call, the call will not be disconnected by a forced shut down. Precautions for operating environment Your device may heat up due to the environment in the following conditions. Use caution to avoid shortening the batterys lifespan, damaging the device, or causing a fire. Do not store your device in very cold or very hot temperatures. Do not expose your device to direct sunlight for extended periods. Do not use or store your device for extended periods in very hot areas, such as inside a car in the summertime. Do not place the device in any areas that may overheat, such as on an electric heating mat. Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers. Do not use a cable whose covering is peeled off or damaged, and do not use any charger or battery that is damaged or malfunctioning. 8 Basics Device layout and functions Package contents Refer to the quick start guide for package contents. The items supplied with the device and any available accessories may vary depending on the region or service provider. The supplied items are designed only for this device and may not be compatible with other devices. Appearances and specifications are subject to change without prior notice. You can purchase additional accessories from your local Samsung retailer. Make sure they are compatible with the device before purchase. Use only Samsung-approved accessories. Using unapproved accessories may cause the performance problems and malfunctions that are not covered by the warranty. Availability of all accessories is subject to change depending entirely on manufacturing companies. For more information about available accessories, refer to the Samsung website. 9 Basics Device layout Speaker SIM card / Memory card tray Touchscreen Earphone jack GPS antenna Rear camera Flash Proximity/Light sensor Front camera Volume key Side key Multipurpose jack

(USB Type-C) NFC antenna

(NFC-enabled models) Speaker Main antenna Microphone 10 Basics When using the speakers, such as when playing media files or using speakerphone, do not place the device close to your ears. Be careful not to expose the camera lens to a strong light source, such as direct sunlight. If the camera lens is exposed to a strong light source, such as direct sunlight, the camera image sensor may be damaged. A damaged image sensor is irreparable and will cause dots or spots in pictures. If you use the device with its glass or acrylic body broken, there may be a risk of injury. Use the device only after it has been repaired at a Samsung Service Centre. If dust or foreign materials enter the microphone, speaker, or receiver, the devices sound may become quiet or certain features may not work. If you attempt to remove the dust or foreign materials with a sharp object, the device may be damaged and its appearance may be affected. Connectivity problems and battery drain may occur in the following situations:

If you attach metallic stickers on the antenna area of the device If you attach a device cover made with metallic material to the device If you cover the devices antenna area with your hands or other objects while using certain features, such as calls or the mobile data connection Using a Samsung-approved screen protector is recommended. Unapproved screen protectors may cause the sensors to malfunction. Do not cover the proximity/light sensor area with screen accessories, such as a screen protector, stickers, or a cover. Doing so may cause the sensor to malfunction. The light may flicker at the top of the device during calls due to proximity sensor operation. Do not allow water to contact the touchscreen. The touchscreen may malfunction in humid conditions or when exposed to water. 11 Basics Hard keys Key Side key Side key +

Volume Down key Setting the Side key Soft buttons Function Press and hold to turn the device on or off. Press to turn on or lock the screen. Press twice to launch the app or feature you set. Press simultaneously to capture a screenshot. Press and hold simultaneously to turn off the device. Select an app or feature to launch by pressing the Side key twice. Launch the Settings app, tap Advanced features Side key, and then select an option you want. Recents button Back button Home button When you turn on the screen, the soft buttons will appear at the bottom of the screen. Refer to Navigation bar (soft buttons) for more information. 12 Basics Charging the battery Charge the battery before using it for the first time or when it has been unused for extended periods. Use only Samsung-approved battery, charger, and cable specifically designed for your device. Incompatible battery, charger, and cable can cause serious injuries or damage to your device. Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. Use only USB Type-C cable supplied with the device. The device may be damaged if you use Micro USB cable. To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging. Wired charging Connect the USB cable to the USB power adaptor and plug the cable into the devices multipurpose jack to charge the battery. After fully charging, disconnect the charger from the device. 13 Basics Quick charging Launch the Settings app, tap Device care Battery Charging, and then activate the feature you want. Fast charging: To use the fast charging feature, use a battery charger that supports Adaptive fast charging. While charging, you cannot activate or deactivate this feature. You can charge the battery more quickly while the device or its screen is turned off. Reducing the battery consumption Your device provides various options that help you conserve battery power. Optimise the device using the device care feature. When you are not using the device, turn off the screen by pressing the Side key. Activate power saving mode. Close unnecessary apps. Deactivate the Bluetooth feature when not in use. Deactivate auto-syncing of apps that need to be synced. Decrease the backlight time. Decrease the screen brightness. Battery charging tips and precautions If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected. Allow a depleted battery to charge for a few minutes before turning on the device. If you use multiple apps at once, network apps, or apps that need a connection to another device, the battery will drain quickly. To avoid losing power during a data transfer, always use these apps after fully charging the battery. Using a power source other than the charger, such as a computer, may result in a slower charging speed due to a lower electric current. The device can be used while it is charging, but it may take longer to fully charge the battery. If the device receives an unstable power supply while charging, the touchscreen may not function. If this happens, unplug the charger from the device. 14 Basics While charging, the device and the charger may heat up. This is normal and should not affect the devices lifespan or performance. If the battery gets hotter than usual, the charger may stop charging. If this occurs during wireless charging, disconnect the device from the charger to let it cool down, then charge the device again later. If you charge the device while the multipurpose jack is wet, the device may be damaged. Thoroughly dry the multipurpose jack before charging the device. If the device is not charging properly, take the device and the charger to a Samsung Service Centre. SIM or USIM card (nano-SIM card) Insert the SIM or USIM card provided by the mobile telephone service provider. For dual SIM models, you can insert two SIM or USIM cards so you can have two phone numbers or service providers for a single device. In some areas, data transfer speeds may be slower if two SIM cards are inserted in the device than when one SIM card is inserted. Some services that require a network connection may not be available depending on the service provider. Installing the SIM or USIM card 1 2 3 4 Dual SIM card tray Single SIM card tray 15 Basics 1 Insert the ejection pin into the hole on the tray to loosen the tray. 2 Pull out the tray gently from the tray slot. 3 Place the SIM or USIM card on the tray with the gold-coloured contacts facing downwards and gently press the SIM or USIM card into the tray to secure it. 4 Insert the tray back into the tray slot. Use only a nano-SIM card. Use caution not to lose or let others use the SIM or USIM card. Samsung is not responsible for any damages or inconveniences caused by lost or stolen cards. Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged. If the card is not fixed firmly into the tray, the SIM card may leave or fall out of the tray. If you insert the tray into your device while the tray is wet, your device may be damaged. Always make sure the tray is dry. Fully insert the tray into the tray slot to prevent liquid from entering your device. SIM card manager (dual SIM models) Launch the Settings app and tap Connections SIM card manager. SIM cards: Activate the SIM card to use and customise the SIM card settings. Preferred SIM card: Select to use specific SIM cards for some features, such as voice calls, when two cards are activated. More SIM card settings: Customise the call settings. 16 Basics Memory card (microSD card) Installing a memory card Your devices memory card capacity may vary from other models and some memory cards may not be compatible with your device depending on the memory card manufacturer and type. To view your devices maximum memory card capacity, refer to the Samsung website. 1 2 3 4 1 Insert the ejection pin into the hole on the tray to loosen the tray. 2 Pull out the tray gently from the tray slot. 3 Place a memory card on the tray with the gold-coloured contacts facing downwards and gently press the memory card into the tray to secure it. 4 Insert the tray back into the tray slot. Some memory cards may not be fully compatible with the device. Using an incompatible card may damage the device or the memory card, or corrupt the data stored in it. Use caution to insert the memory card right-side up. Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged. When you remove the tray from the device, the mobile data connection will be disabled. If the card is not fixed firmly into the tray, the memory card may leave or fall out of the tray. If you insert the tray into your device while the tray is wet, your device may be damaged. Always make sure the tray is dry. Fully insert the tray into the tray slot to prevent liquid from entering your device. 17 Basics The device supports the FAT and the exFAT file systems for memory cards. When inserting a card formatted in a different file system, the device will ask to reformat the card or will not recognise the card. To use the memory card, you must format it. If your device cannot format or recognise the memory card, contact the memory card manufacturer or a Samsung Service Centre. Frequent writing and erasing of data shortens the lifespan of memory cards. When inserting a memory card into the device, the memory cards file directory appears in the My Files SD card folder. Removing the memory card Before removing the memory card, first unmount it for safe removal. Launch the Settings app and tap Device care Storage Advanced SD card Unmount. Do not remove external storage, such as a memory card or USB storage, while the device is transferring or accessing information, or right after transferring data. Doing so can cause data to be corrupted or lost or cause damage to the external storage or device. Samsung is not responsible for losses, including loss of data, resulting from the misuse of external storage devices. Formatting the memory card A memory card formatted on a computer may not be compatible with the device. Format the memory card on the device. Launch the Settings app and tap Device care Storage Advanced SD card Format. Before formatting the memory card, remember to make backup copies of all important data stored in the memory card. The manufacturers warranty does not cover loss of data resulting from user actions. 18 Basics Turning the device on and off Follow all posted warnings and directions from authorised personnel in areas where the use of wireless devices is restricted, such as aeroplanes and hospitals. Volume Down key Side key Press and hold the Side key for a few seconds to turn on the device. 1 To turn off the device, press and hold the Side key. Alternatively, open the notification Turning the device on Turning the device off panel and tap

. 2 Tap Power off. Forcing restart To restart the device, tap Restart. If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it. 19 Basics Emergency mode You can switch the device to emergency mode to reduce battery consumption. Some apps and functions will be restricted. In emergency mode, you can make an emergency call, send your current location information to others, sound an emergency alarm, and more. To activate emergency mode, press and hold the Side key, and then tap Emergency mode. Alternatively, open the notification panel and tap Emergency mode. To deactivate emergency mode, tap Turn off Emergency mode. The usage time left shows the time remaining before the battery power runs out. Usage time left may vary depending on your device settings and operating conditions. Initial setup When you turn on your device for the first time or after performing a data reset, follow the on-screen instructions to set up your device. If you do not connect to a Wi-Fi network, you may not be able to set up some device features during the initial setup. Samsung account Your Samsung account is an integrated account service that allows you to use a variety of Samsung services provided by mobile devices, TVs, and the Samsung website. To check the list of services that can be used with your Samsung account, visit account.samsung.com. 1 Launch the Settings app and tap Accounts and backup Accounts Add account Samsung account. Alternatively, launch the Settings app and tap

. 2 If you already have a Samsung account, sign in to your Samsung account. If you want to sign in using your Google account, tap Continue with Google. If you do not have a Samsung account, tap Create account. 20 Basics Finding your ID and resetting your password If you forget your Samsung account ID or password, tap Find ID or Reset password on the Samsung account sign-in screen. You can find your ID or reset your password after you enter the required information. Signing out of your Samsung account When you sign out of your Samsung account, your data, such as contacts or events, will also be removed from your device. 1 Launch the Settings app and tap Accounts and backup Accounts. 2 Tap Samsung account Personal info Sign out. 3 Tap Sign out, enter your Samsung account password, and then tap OK. Transferring data from your previous device

(Smart Switch) You can use Smart Switch to transfer data from your previous device to your new device. Launch the Settings app and tap Accounts and backup Smart Switch. This feature may not be supported on some devices or computers. Limitations apply. Visit www.samsung.com/smartswitch for details. Samsung takes copyright seriously. Only transfer content that you own or have the right to transfer. Transferring data wirelessly Transfer data from your previous device to your device wirelessly via Wi-Fi Direct. 1 On the previous device, launch Smart Switch. If you do not have the app, download it from Galaxy Store or Play Store. 2 On your device, launch the Settings app and tap Accounts and backup Smart Switch. 21 Basics 3 Place the devices near each other. 4 On the previous device, tap Send data Wireless. 5 On the previous device, tap Allow. 6 On your device, select an item to bring and tap Transfer. Backing up and restoring data using external storage Transfer data using external storage, such as a microSD card. 1 Back up data from your previous device to external storage. 2 Insert or connect the external storage device to your device. 3 On your device, launch the Settings app and tap Accounts and backup Smart Switch Restore. 4 Follow the on-screen instructions to transfer data from external storage. Transferring backup data from a computer Transfer data between your device and a computer. You must download the Smart Switch computer version app from www.samsung.com/smartswitch. Back up data from your previous device to a computer and import the data to your device. 1 On the computer, visit www.samsung.com/smartswitch to download Smart Switch. 2 On the computer, launch Smart Switch. If your previous device is not a Samsung device, back up data to a computer using a program provided by the devices manufacturer. Then, skip to the fifth step. 3 Connect your previous device to the computer using the devices USB cable. 4 On the computer, follow the on-screen instructions to back up data from the device. Then, disconnect your previous device from the computer. 5 Connect your device to the computer using the USB cable. 6 On the computer, follow the on-screen instructions to transfer data to your device. 22 Basics Understanding the screen Controlling the touchscreen Tapping Tap the screen. Dragging Tap and hold an item and drag it to the target position. Swiping Swipe upwards, downwards, to the left, or to the right. Tapping and holding Tap and hold the screen for approximately 2 seconds. Double-tapping Double-tap the screen. Spreading and pinching Spread two fingers apart or pinch on the screen. Do not allow the touchscreen to come into contact with other electrical devices. Electrostatic discharges can cause the touchscreen to malfunction. To avoid damaging the touchscreen, do not tap it with anything sharp or apply excessive pressure to it with your fingertips. It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting. The device may not recognise touch inputs close to the edges of the screen, which are outside of the touch input area. 23 Basics Navigation bar (soft buttons) When you turn on the screen, the soft buttons will appear on the navigation bar at the bottom of the screen. The soft buttons are set to the Recents button, Home button, and Back button by default. The functions of the buttons can change according to the app currently being used or usage environment. Button Function Recents Tap to open the list of recent apps. Home Back Tap to return to the Home screen. Tap and hold to launch the Google Assistant app. Tap to return to the previous screen. Hiding the navigation bar View files or use apps on a wider screen by hiding the navigation bar. Launch the Settings app, tap Display Navigation bar, and then tap Swipe gestures under Navigation type. The navigation bar will be hidden and the gesture hints will appear. Tap More options and select an option you want. Swipe from bottom Swipe from sides and bottom If you want to hide the gesture hints at the bottom of the screen, tap the Gesture hints switch to deactivate it. 24 Basics Home screen and Apps screen The Home screen is the starting point for accessing all of the devices features. It displays widgets, shortcuts to apps, and more. The Apps screen displays icons for all apps, including newly installed apps. Switching between Home and Apps screens On the Home screen, swipe upwards or downwards to open the Apps screen. To return to the Home screen, swipe upwards or downwards on the Apps screen. Alternatively, tap the Home button or the Back button. Finder Favourite apps Home screen Apps screen If you add the Apps button on the Home screen, you can open the Apps screen by tapping the button. On the Home screen, tap and hold an empty area, tap Home screen settings, and then tap the Apps button switch to activate it. The Apps button will be added at the bottom of the Home screen. Apps button 25 Basics Editing the Home screen On the Home screen, tap and hold an empty area, or pinch your fingers together to access the editing options. You can set the wallpaper, add widgets, and more. You can also add, delete, or rearrange Home screen panels. Adding panels: Swipe to the left, and then tap Moving panels: Tap and hold a panel preview, and then drag it to a new location. Deleting panels: Tap on the panel. Wallpapers: Change the wallpaper settings for the Home screen and the locked screen. Themes: Change the devices theme. Visual elements of interface, such as colours, icons, and wallpapers, will change depending on the selected theme. Widgets: Widgets are small apps that launch specific app functions to provide information and convenient access on your Home screen. Tap and hold a widget, and then drag it to the Home screen. The widget will be added on the Home screen. Home screen settings: Configure settings for the Home screen, such as the screen layout. Displaying all apps on the Home screen Without using a separate Apps screen, you can set the device to display all apps on the Home screen. On the Home screen, tap and hold an empty area, and then tap Home screen settings Home screen layout Home screen only Apply. You can now access all your apps by swiping to the left on the Home screen. 26 Basics Launching Finder Search for content on the device quickly. downwards, and then tap

. 2 Enter a keyword. 1 On the Apps screen, tap Search. Alternatively, open the notification panel, swipe Apps and content on your device will be searched. If you tap on the keyboard, you can search for more content. Moving items Tap and hold an item, and then drag it to a new location. To move the item to another panel, drag it to the side of the screen. To add a shortcut to an app on the Home screen, tap and hold an item on the Apps screen, and then tap Add to Home. A shortcut to the app will be added on the Home screen. You can also move frequently used apps to the shortcuts area at the bottom of the Home screen. Creating folders Create folders and gather similar apps to quickly access and launch apps. On the Home screen or the Apps screen, tap and hold an app, and then drag it over another app. A new folder containing the selected apps will be created. Tap Folder name and enter a folder name. Adding more apps Tap dragging it to the folder. on the folder. Tick the apps to add and tap Done. You can also add an app by 27 Basics Moving apps from a folder Tap and hold an app to drag it to a new location. Deleting a folder Tap and hold a folder, and then tap Delete folder. Only the folder will be deleted. The folders apps will be relocated to the Apps screen. Lock screen Pressing the Side key turns off the screen and locks it. Also, the screen turns off and automatically locks if the device is not used for a specified period. To unlock the screen, swipe in any direction when the screen turns on. If the screen is off, press the Side key to turn on the screen. Alternatively, double-tap the screen. Changing the screen lock method To change the screen lock method, launch the Settings app, tap Lock screen Screen lock type, and then select a method. When you set a pattern, PIN, password, or your biometric data for the screen lock method, you can protect your personal information by preventing others from accessing your device. After setting the screen lock method, the device will require an unlock code whenever unlocking it. You can set your device to perform a factory data reset if you enter the unlock code incorrectly several times in a row and reach the attempt limit. Launch the Settings app, tap Lock screen Secure lock settings, unlock the screen using the preset screen lock method, and then tap the Auto factory reset switch to activate it. Indicator icons Indicator icons appear on the status bar at the top of the screen. The icons listed in the table below are most common. Icon Meaning No signal Signal strength Roaming (outside of normal service area) GPRS network connected 28 Basics Icon Meaning

LTE network connected EDGE network connected UMTS network connected HSDPA network connected HSPA+ network connected Wi-Fi connected Bluetooth feature activated Location services being used Call in progress Missed call New text or multimedia message Alarm activated Mute mode / Vibration mode Flight mode activated Error occurred or caution required Battery charging / Battery power level

The status bar may not appear at the top of the screen in some apps. To display the status bar, drag down from the top of the screen. Some indicator icons appear only when you open the notification panel. The indicator icons may appear differently depending on the service provider or model. 29 Basics Screen capture Capture a screenshot while using the device. Press and hold the Volume Down key and the Side key simultaneously. You can view the captured screenshots in Gallery. It is not possible to capture a screenshot while using some apps and features. Notification panel When you receive new notifications, indicator icons appear on the status bar. To see more information about the icons, open the notification panel and view the details. To open the notification panel, drag the status bar downwards. To close the notification panel, swipe upwards on the screen. You can use the following functions on the notification panel. Quick setting buttons Control media on your device and connected nearby devices. View the notification details and perform various actions. Power options Launch Settings. Control connected nearby devices. Clear all notifications. Access the notification settings. 30 Basics Using quick setting buttons Tap quick setting buttons to activate certain features. Swipe downwards on the notification panel to view more buttons. Quick setting buttons Adjust the brightness of the display. To change feature settings, tap the text under each button. To view more detailed settings, tap and hold a button. To rearrange buttons, tap Button order, tap and hold a button, and then drag it to another location. Controlling media playback Take control of music or video playback easily using the Media feature. You can also continue playback on another device. 1 Open the notification panel and tap Media. 2 Tap the icons on the controller to control the playback. To continue playback on another device, tap and select the device you want. 31 Launch quickly and take control of nearby connected devices on the notification panel. Basics Controlling nearby devices 1 Open the notification panel and tap Devices. Nearby connected devices will appear. 2 Select a nearby device to control it. Entering text Keyboard layout A keyboard appears automatically when you enter text. Additional keyboard functions View more keyboard functions. Enter uppercase. For all caps, tap it twice. Delete a preceding character. Enter symbols. Break to the next line. Text entry is not supported in some languages. To enter text, you must change the input language to one of the supported languages. Enter a space. Changing the input language Tap Languages and types Manage input languages and select the languages to use. When you select two or more languages, you can switch between the input languages by swiping to the left or right on the space key. 32 Basics Changing the keyboard On the navigation bar, tap to change the keyboard. To change the keyboard type, tap select the keyboard type you want. Languages and types, select a language, and then If the keyboard button (

) does not appear on the navigation bar, launch the Settings app, tap General management Language and input On-screen keyboard, and then tap the Show Keyboard button switch to activate it. On a 3 x 4 keyboard, a key has three or four characters. To enter a character, tap the corresponding key repeatedly until the desired character appears. Additional keyboard functions

: Enter emoticons.

: Enter stickers.

: Enter text by voice.

: Change the keyboard settings. Tap to use more keyboard functions.

: Search for content and enter it.

: Translate text and enter it.

: Share video links.

: Open the text editing panel.

: Change the keyboard mode.

: Change the keyboard size.

: Enter stickers. 33 Some features may not be available depending on the service provider or model. Basics Copying and pasting 1 Tap and hold over text. or 2 Drag 3 Tap Copy or Cut. to select the desired text, or tap Select all to select all text. The selected text is copied to the clipboard. 4 Tap and hold where the text is to be inserted and tap Paste. 34 Apps and features Installing or uninstalling apps Galaxy Store Purchase and download apps. You can download apps that are specialised for Samsung Galaxy devices. Launch the Galaxy Store app. Browse apps by category or tap to search for a keyword. This app may not be available depending on the service provider or model. To change the auto update settings, tap select an option. Auto update apps, and then Play Store Purchase and download apps. Launch the Play Store app. Browse apps by category or search for apps by keyword. To change the auto update settings, tap then select an option. Settings Auto-update apps, and Managing apps Uninstalling or disabling apps Tap and hold an app and select an option. Uninstall: Uninstall downloaded apps. Disable: Disable selected default apps that cannot be uninstalled from the device. Some apps may not support this feature. 35 Apps and features Enabling apps Launch the Settings app, tap Apps Disabled, select an app, and then tap Enable. Setting app permissions For some apps to operate properly, they may need permission to access or use information on your device. To view your app permission settings, launch the Settings app and tap Apps. Select an app and tap Permissions. You can view the apps permissions list and change its permissions. To view or change app permission settings by permission category, launch the Settings app and tap Apps Permission manager. Select an item and select an app. If you do not grant permissions to apps, the basic features of the apps may not function properly. Phone Introduction Make or answer voice and video calls. Making calls 1 Launch the Phone app and tap Keypad. 2 Enter a phone number. 3 Tap to make a voice call, or tap or to make a video call. Add the number to the contacts list. Preview the phone number. More options Search for a contact. 36 Apps and features Making calls from call logs or contacts list Launch the Phone app, tap Recents or Contacts, and then swipe to the right on a contact or a phone number to make a call. If this feature is deactivated, launch the Settings app, tap Advanced features Motions and gestures, and then tap the Swipe to call or send messages switch to activate it. Using speed dial To set a number to speed dial, launch the Phone app, tap Keypad or Contacts Speed dial numbers, select a speed dial number, and then add a phone number. To make a call, tap and hold a speed dial number on the keypad. For speed dial numbers 10 and up, tap the first digit(s) of the number, and then tap and hold the last digit. For example, if you set the number 123 as a speed dial number, tap 1, tap 2, and then tap and hold 3. Making an international call 1 Launch the Phone app and tap Keypad. 2 Tap and hold 0 until the + sign appears. 3 Enter the country code, area code, and phone number, and then tap

. Receiving calls Answering a call Rejecting a call When a call comes in, drag outside the large circle. When a call comes in, drag outside the large circle. To send a message when rejecting an incoming call, drag the Send message bar upwards and select a message to send. To create various rejection messages, launch the Phone app, tap Settings Quick decline messages, enter a message, and then tap

. 37 Apps and features Blocking phone numbers Block calls from specific numbers added to your block list. 1 Launch the Phone app and tap Settings Block numbers. 2 Tap Recents or Contacts, select contacts or phone numbers, and then tap Done. To manually enter a number, tap Add phone number, enter a phone number, and then tap

. When blocked numbers try to contact you, you will not receive notifications. The calls will be logged in the call log. You can also block incoming calls from people that do not show their caller ID. Tap the Block unknown/hidden numbers switch to activate the feature. Options during calls Add call: Dial a second call. The first call will be put on hold. When you end the second call, the first call will be resumed. Hold call: Hold a call. Bluetooth: Switch to a Bluetooth headset if it is connected to the device. Speaker: Activate or deactivate the speakerphone. When using the speakerphone, keep the device away from your ears. Mute: Turn off the microphone so that the other party cannot hear you. Keypad / Hide: Open or close the keypad.

: End the current call. Camera: During a video call, turn off the camera so that the other party cannot see you. Switch: During a video call, switch between the front and rear cameras. Some features may not be available depending on the service provider or model. 38 Apps and features Contacts Introduction Create new contacts or manage contacts on the device. Adding contacts Creating a new contact 1 Launch the Contacts app and tap

. 2 Select a storage location. 3 Enter contact information and tap Save. Importing contacts Add contacts by importing them from other storages to your device. 1 Launch the Contacts app and tap Manage contacts Import or export contacts Import. 2 Follow the on-screen instructions to import contacts. Syncing contacts with your web accounts Sync your device contacts with online contacts saved in your web accounts, such as your Samsung account. 1 Launch the Settings app, tap Accounts and backup Accounts and select the account to sync with. 2 Tap Sync account and tap the Contacts switch to activate it. For the Samsung account, tap Sync settings and tap the Contacts switch to activate it. 39 Tap the contact. Then take one of the following actions:

at the top of the contacts list and enter search criteria. Apps and features Searching for contacts Launch the Contacts app. Tap

: Add to favourite contacts.

: Make a voice call.

: Make a video call.

: Compose a message.

: Compose an email. Deleting contacts 1 Launch the Contacts app and tap Delete. 2 Select contacts and tap Delete. To delete contacts one by one, tap a contact from the contacts list and tap Delete. Sharing contacts You can share contacts with others by using various sharing options. 1 Launch the Contacts app and tap Share. 2 Select contacts and tap Share. 3 Select a sharing method. Creating groups You can add groups, such as family or friends, and manage contacts by group. 1 Launch the Contacts app and tap Groups Create group. 2 Follow the on-screen instructions to create a group. Merging duplicate contacts If your contacts list includes duplicate contacts, merge them into one to streamline your contacts list. 1 Launch the Contacts app and tap Manage contacts Merge contacts. 2 Tick contacts and tap Merge. 40 Apps and features Messages Introduction Send and view messages by conversation. Sending messages 1 Launch the Messages app and tap

. 2 Add recipients and enter a message. You may incur additional charges for sending or receiving messages when you are roaming. To record and send a voice message, tap and hold your finger. The recording icon appears only while the message input field is empty.

, say your message, and then release 3 Tap to send the message. Recipient Enter recipients. Enter a message. Enter stickers. Attach files. Send the message. Viewing messages 1 Launch the Messages app and tap Conversations. 2 On the messages list, select a contact or a phone number. To reply to the message, tap the message input field, enter a message, and then tap To adjust the font size, spread two fingers apart or pinch on the screen. Sorting messages You can sort messages by category and manage them easily. Launch the Messages app and tap Conversations New category Add category. If the category option does not appear, tap Settings and tap the Conversations categories switch to activate it. 41 Apps and features Deleting messages Tap and hold a message to delete, then tap Delete. Changing message settings Launch the Messages app, tap Settings. You can block unwanted messages, change notification settings, and more. Internet Browse the Internet to search for information and bookmark your favourite webpages to access them conveniently. 1 Launch the Internet app. 2 Enter the web address or a keyword, and then tap Go. To view the toolbars, drag your finger downwards slightly on the screen. To switch between tabs quickly, swipe to the left or right on the address field. Bookmark the current webpage. Refresh the current webpage. View your bookmarks. Open the homepage. Manage tabs. / Use secret mode. Move between pages. More options 42 Apps and features Using secret mode If you set a password for secret mode, you can prevent others from viewing your search history, browsing history, bookmarks, and saved pages. 1 Tap Turn on Secret mode. 2 Tap the Lock Secret mode switch to activate it, tap Start, and then set a password for secret mode. In secret mode, the device will change the colour of the toolbars. To deactivate secret mode, tap Turn off Secret mode. In secret mode, you cannot use some features, such as screen capture. Email Setting up email accounts Set up an email account when opening Email for the first time. 1 Launch the Email app. 2 On the list, select an email service or tap Other. 3 Follow the on-screen instructions to complete the setup. To set up another email account, tap Add account. Set default account. Sending emails 1 Tap to compose an email. 2 Add recipients and enter a subject line and text. 3 Tap to send the mail. If you have more than one email account, you can set one as the default account. Tap 43 Apps and features Reading emails Camera When Email is open, the device will automatically retrieve new emails. To manually retrieve emails, swipe downwards on the top of the emails list. Tap an email on the screen to read it. If email syncing is disabled, new emails cannot be retrieved. To enable email syncing, tap your account name, and then tap the Sync emails switch to activate it. Introduction Take photos and record videos using various modes and settings. Camera etiquette Do not take photos or record videos of other people without their permission. Do not take photos or record videos where legally prohibited. Do not take photos or record videos in places where you may violate other peoples privacy. Taking photos 1 Launch the Camera app. You can also launch the app by pressing the Side key twice quickly or dragging the circle on the locked screen. outside Some camera features are not available when you launch the Camera app from the locked screen or when the screen is turned off while the screen lock method is set. The camera automatically shuts off when unused. Some methods may not be available depending on the service provider or model. 2 Tap the image on the preview screen where the camera should focus. To adjust the brightness of photos, tap the screen. When the adjustment bar appears, drag the adjustment bar towards or

. 44 Apps and features 3 Tap to take a photo. To change the shooting mode, drag the shooting modes list to the left or right, or swipe to the left or right on the preview screen. Camera settings Options for current shooting mode Zoom Preview thumbnail Take a photo. Shooting modes list Switch between the front and rear cameras. The preview screen may vary depending on the shooting mode and which camera is being used. When you take photos or videos with a high resolution or a high zoom ratio, the focus may not be clear if the subject is close. Take photos or videos from a good distance. If photos you take appear blurry, clean the camera lens and try again. Make sure that the lens is not damaged or contaminated. Otherwise, the device may not work properly in some modes that require high resolutions. Your devices camera features a wide-angle lens. Minor distortion may occur in wide-

angle photos or videos and does not indicate device performance problems. The maximum capacity for recording a video may vary depending on the resolution. The camera may fog up or form condensation if the device is exposed to sudden changes in air temperature, due to the difference in temperature outside and inside the camera cover. Try to avoid such conditions when planning to use the camera. If fogging does occur, allow the camera to dry naturally at room temperature before taking photos or recording videos, otherwise results may look blurry. 45 Apps and features Using zoom features

Select apart on the screen to zoom in, and pinch to zoom out. or drag it to the left or right to zoom in or out. Alternatively, spread two fingers

: The wide-angle camera lets you take basic photos or record normal videos.

: The telephoto camera lets you take photos or record videos by enlarging the subject. Zoom features are available only when using the rear camera. Using the camera button Tap and hold the camera button to record a video. If you add another camera button, you can move it anywhere on the screen and take photos more conveniently. On the preview screen, tap the Floating Shutter button switch to activate it. Shooting methods and tap Options for current shooting mode On the preview screen, use the following options.

: Activate or deactivate the flash.

: Select an aspect ratio for photos.

: Select an aspect ratio for videos.

: Apply a filter effect or beauty effects.

: Select the length of the delay before the camera automatically takes a photo.

: Select a metering method. This determines how light values are calculated. Centre-weighted uses the light in the centre portion of the shot to calculate the exposure of the shot. calculate the exposure of the shot. Matrix averages the entire scene. Spot uses the light in a concentrated centre area of the shot to The available options may vary depending on the model or shooting mode. Locking the focus (AF) and exposure (AE) You can lock the focus or exposure on a selected area to prevent the camera from automatically adjusting based on changes to the subjects or light sources. Tap and hold the area to focus, the AF/AE frame will appear on the area and the focus and exposure setting will be locked. The setting remains locked even after you take a photo. This feature is available only in PHOTO or PRO modes. 46 Apps and features Photo mode The camera adjusts the shooting options automatically depending on the surroundings to capture photos easily. On the shooting modes list, tap PHOTO and tap to take a photo. Taking selfies You can take self-portraits with the front camera. 1 On the preview screen, swipe upwards or downwards, or tap to switch to the front camera for self-portraits. 2 Face the front camera lens. 3 Tap to take a photo. To take self-portraits with a wide-angle shot of the landscape or people, tap

. Applying filter and beauty effects You can select a filter effect and modify facial features, such as your skin tone or face shape, before taking a photo. 1 On the preview screen, tap

. 2 Select effects and take a photo. Video mode The camera adjusts the shooting options automatically depending on the surroundings to record videos easily. 1 On the shooting modes list, tap VIDEO and tap to record a video. To capture an image from the video while recording, tap To change the focus while recording a video, tap where you want to focus. To use auto focus mode, tap AF to cancel the manually set focus. 2 Tap to stop recording the video. 47 Apps and features Live focus mode The camera allows you to capture photos where the background is blurred and the subject stands out clearly. 1 On the shooting modes list, tap MORE LIVE FOCUS. 2 Drag the background blur adjustment bar to adjust the blur level. 3 When Effect Ready. appears on the preview screen, tap to take a photo. Background blur adjustment bar Use this feature in a place that has sufficient light. The background blur may not be applied properly in the following conditions:

The device or the subject is moving. The subject is thin or transparent. The subject has a similar colour to the background. The subject or background is plain. Pro mode Capture photos while manually adjusting various shooting options, such as exposure value and ISO value. On the shooting modes list, tap MORE PRO. Select options and customise the settings, and then tap to take a photo. 48 Apps and features Available options

: Select an ISO value. This controls camera light sensitivity. Low values are for stationary or brightly lit objects. Higher values are for fast-moving or poorly lit objects. However, higher ISO settings can result in noise in photos.

: Select an appropriate white balance, so images have a true-to-life colour range. You can set the colour temperature.

: Change the exposure value. This determines how much light the cameras sensor receives. For low-light situations, use a higher exposure. Panorama mode Using panorama mode, take a series of photos and then stitch them together to create a wide scene. 1 On the shooting modes list, tap MORE PANORAMA. 2 Tap and move the device slowly in one direction. Keep the image within the frame on the cameras viewfinder. If the preview image is out of the guide frame or you do not move the device, the device will automatically stop taking photos. 3 Tap to stop taking photos. Avoid taking photos of indistinct backgrounds, such as an empty sky or a plain wall. Macro mode Take photos of subjects at close range. On the shooting modes list, tap MORE MACRO. Deco Pic mode Capture photos or videos with various stickers. On the shooting modes list, tap MORE Deco Pic. 49 Apps and features Customising camera settings On the preview screen, tap shooting mode. Intelligent features

. Some options may not be available depending on the Pictures Videos Useful features Smart selfie angle: Set the device to automatically switch to a wide-angle selfie when there are more than two people in the frame. Hold Shutter button to: Select an action to perform when you tap and hold the camera button. Rear video size: Select an aspect ratio and resolution for videos you want to take with the rear camera. Using a higher resolution will result in higher quality videos, but they will take up more memory. Front video size: Select an aspect ratio and resolution for videos you want to take with the front camera. Using a higher resolution will result in higher quality videos, but they will take up more memory. Auto HDR: Take photos with rich colours and reproduce details even in bright and dark areas. Pictures as previewed: Set the device to save photos as they appear on the preview screen when taken with the front camera without flipping them. Grid lines: Display viewfinder guides to help composition when selecting subjects. Location tags: Attach a GPS location tag to the photo. GPS signal strength may decrease in locations where the signal is obstructed, such as between buildings or in low-lying areas, or in poor weather conditions. Your location may appear on your photos when you upload them to the Internet. To avoid this, deactivate the location tag setting. Shooting methods: Select additional shooting methods for taking a photo or recording a video. 50 Apps and features Settings to keep: Keep the last settings you used, such as the shooting mode, when you launch the camera. Storage location: Select the memory location for storage. This feature will appear when you insert a memory card. Shutter sound: Enable or disable the shutter sound. Touch vibrations: Set the device to vibrate when you touch the screen, such as when you tap the camera button. Reset settings: Reset the camera settings. About Camera: View the Camera app version and legal information. Some features may not be available depending on the model. Introduction View images and videos stored in your device. You can also manage images and videos by album or create stories. Gallery Using Gallery Launch the Gallery app. More options Search for images. 51 Apps and features Viewing images Launch the Gallery app and select an image. To view other files, swipe to the left or right on the screen. More options Modify the image. Share the image with others. Add the image to favourites. Delete the image. Cropping enlarged images 1 Launch the Gallery app and select an image. 2 Spread two fingers apart on the area you want to save and tap

. The cropped area will be saved as a file. Saved image thumbnail 52 Apps and features Capture the current screen. Switch to the pop-up video player. Lock the playback screen. Rewind or fast-forward by dragging the bar. Skip to the previous video. Tap and hold to rewind. Viewing videos Launch the Gallery app select a video to play. To view other files, swipe to the left or right on the screen. More options Create an animated GIF. Change the screen ratio. Rotate the screen. Skip to the next video. Tap and hold to fast-forward. Pause and resume playback. Drag your finger up or down on the left side of the playback screen to adjust the brightness, or drag your finger up or down on the right side of the playback screen to adjust the volume. To rewind or fast-forward, swipe to the left or right on the playback screen. Albums Create albums and sort your images and videos. 1 Launch the Gallery app and tap Albums Create album to create an album. 2 Select the album, tap Add items, and then copy or move the images or videos you want. 53 Apps and features Stories When you capture or save images and videos, the device will read their date and location tags, sort the images and videos, and then create stories. Launch the Gallery app, tap Stories, and then select a story. To add or delete images or videos, select a story and tap Story album Add or Edit. Deleting images or videos Launch the Gallery app, tap and hold an image, a video, or a story to delete, and then tap Delete. Using the recycle bin feature You can keep the deleted images and videos in the recycle bin. The files will be deleted after a certain period. Launch the Gallery app, tap Settings, and then tap the Recycle bin switch to activate it. To view files in the recycle bin, launch the Gallery app and tap Recycle bin. 54 Apps and features Multi window Introduction Multi window lets you run two apps at the same time in the split screen view. You can also run multiple apps at the same time in the pop-up view. Split screen view Pop-up view Some apps may not support this feature. Split screen view 1 Tap the Recents button to open the list of recently used apps. 2 Swipe to the left or right, tap an apps icon, and then tap Open in split screen view. The selected app will launch in the split screen view. 3 On the other window, swipe left or right to select another app to launch. To launch apps not on the list of recently used apps, tap the Home button or Back button and select an app. 55 Apps and features Adjusting the window size Drag the bar between the app windows up or down to adjust the size of the windows. When you drag the bar between the app windows to the top or bottom edge of the screen, the window will be maximised. Pop-up view 1 Tap the Recents button to open the list of recently used apps. 2 Swipe to the left or right, tap an apps icon, and then tap Open in pop-up view. The app screen will appear in the pop-up view. If you tap the Home button while using a pop-up window, the window will be minimised and displayed as an app icon. To use the pop-up window again, tap the app icon. Moving pop-up windows To move a pop-up window, tap the windows toolbar and drag it to a new location. Samsung Notes Create notes by entering text from the keyboard or by handwriting or drawing on the screen. You can also insert images or voice recordings into your notes. Creating notes 1 Launch the Samsung Notes app, tap

, and then create a note. You can change the input method by tapping or

. Enter text using the keyboard. Write or draw with pens. Paint with brushes. Insert files. 2 When you are finished composing the note, tap Save. Deleting notes Tap and hold a note to delete and tap Delete. 56 Apps and features Samsung Members Samsung Members offers support services to customers, such as device problem diagnosis, and lets users submit questions and error reports. You can also share information with others in the Galaxy users community or view the latest news and tips. Samsung Members can help you solve any problems you might encounter while using your device. Calendar Manage your schedule by entering upcoming events in your planner. Creating events 1 Launch the Calendar app and tap or double-tap a date. If the date already has saved events or tasks in it, tap the date and tap

. 2 Enter event details and tap Save. Syncing events with your accounts 1 Launch the Settings app, tap Accounts and backup Accounts, and then select the account to sync with. 2 Tap Sync account and tap the Calendar switch to activate it. For the Samsung account, tap Sync settings and tap the Calendar switch to activate it. To add accounts to sync with, launch the Calendar app and tap account. Then, select an account to sync with and sign in. When an account is added, a blue circle is displayed next to the account name. Add new 57 Apps and features Reminder Register to-do items as reminders and receive notifications according to the condition you set. To receive more accurate notifications, connect to a Wi-Fi or mobile network. To use location reminders, the GPS feature must be activated. Location reminders may not be available depending on the model. Launch the Calendar app and tap Reminder app icon (

) will be added to the Apps screen. Reminder. The Reminder screen will appear and the Starting Reminder Creating reminders 1 Launch the Reminder app. 2 Tap Write a reminder or

, enter the details, and then tap Save. Completing reminders On the reminders list, select a reminder and tap Complete. Restoring reminders Restore reminders that have been completed. 1 On the reminders list, tap Completed Edit. 2 Tick items to restore and tap Restore. Reminders will be added to the reminders list and you will be reminded again. Deleting reminders To delete a reminder, select a reminder and tap Delete. To delete multiple reminders, tap and hold a reminder, tick reminders to delete, and then tap Delete. 58 Apps and features Radio Launch the Radio app. Before you use this app, you must connect an earphone, which serves as the radio antenna. The FM radio scans and saves available stations automatically when running for the first time. Record audio from the FM radio. Turn the FM radio on or off. Enter radio station frequency manually. Fine-tune the frequency. Scan and save available stations automatically. Access additional options. Add the current radio station to the favourites list. Search for an available radio station. View the list of favourite stations. View the list of available stations. This app may not be available depending on the region or service provider. Playing through the speaker Tap Play through speaker. You can listen to the radio through the speaker instead of the connected earphone. 59 Apps and features Voice Recorder Record or play voice recordings. 1 Launch the Voice Recorder app. 2 Tap to start recording. Speak into the microphone. to pause recording. Tap While making a voice recording, tap BOOKMARK to insert a bookmark. to finish recording. 3 Tap 4 Enter a file name and tap Save. My Files Access and manage various files stored in the device. Launch the My Files app. To check for unnecessary data and free up the devices storage, tap Analyse storage. To search for files or folders, tap

. Clock Set alarms, check the current time in many cities around the world, time an event, or set a specific duration. Launch the Clock app.

: View the calculation history. To clear the history, tap Clear history. To close the

: Use the unit conversion tool. You can convert various values, such as area, length, or Calculator Perform simple or complex calculations. Launch the Calculator app. calculation history panel, tap

. temperature, into other units.

: Display the scientific calculator. 60 Apps and features Sharing content Share content by using various sharing options. The following actions are an example of sharing images. 1 Launch the Gallery app and select an image. 2 Tap and select a sharing method you want. You may incur additional charges when sharing files via the mobile network. Quick Share Sharing content with nearby devices Share content with nearby devices via Wi-Fi Direct or Bluetooth. 1 Launch the Gallery app and select an image. 2 On the other device, open the notification panel, swipe downwards, and then tap

(Quick Share) to activate it. Quick Share and select a device to transfer the image to. 3 Tap 4 Accept the file transfer request on the other device. Setting who can find your device Set who is allowed to find and send content to your device. 1 Open the notification panel, swipe downwards, and then tap

(Quick Share) to activate it. 2 Tap and hold

(Quick Share). The Quick Share settings screen will appear. 3 Select an option. Contacts only: Allow only your contacts to share with your device. Everyone: Allow any nearby devices to share with your device. 61 Apps and features Shared album Create a shared album to share photos or videos with others, and download your files whenever you want. 1 Launch the Gallery app and select an image. Shared album. 2 Tap 3 Select an album to share. If there is no album to share, tap Create shared album and follow the on-screen instructions to create an album. When you play a high-resolution video from a shared album, the video connection may drop depending on the network speed. Content that is larger than 1 GB cannot be shared to a shared album. Smart View View your devices displayed content on a large screen by connecting your device to a screen mirroring-enabled TV or monitor. 1 Open the notification panel, swipe downwards, and then tap

(Smart View). 2 Select a device to mirror your devices screen or display content. When you play a video with Smart View, the resolution may vary depending on the TV model. 62 Apps and features Samsung Global Goals The Global Goals, which were established by the United Nations General Assembly in 2015, consist of goals that aim to create a sustainable society. These goals have the power to end poverty, fight inequality, and stop climate change. With Samsung Global Goals, learn more about the global goals and join the movement for a better future. Google apps Google provides entertainment, social network, and business apps. You may require a Google account to access some apps. To view more app information, access each apps help menu. Chrome: Search for information and browse webpages. Gmail: Send or receive emails via the Google Mail service. Maps: Find your location on the map, search the world map, and view location information for various places around you. YT Music: Enjoy various music and videos provided by YouTube Music. You can also view the music collections stored on your device and play them. Play Movies & TV: Purchase or rent videos, such as movies and TV programmes, from Play Store. Drive: Store your content on the cloud, access it from anywhere, and share it with others. YouTube: Watch or create videos and share them with others. Photos: Search for, manage, and edit all your photos and videos from various sources in one place. Google: Search quickly for items on the Internet or your device. Duo: Make a simple video call. Some apps may not be available depending on the service provider or model. 63 Settings Introduction Customise device settings. Launch the Settings app. Connections To search for settings by entering keywords, tap

. Options Change settings for various connections, such as the Wi-Fi feature and Bluetooth. On the Settings screen, tap Connections. Wi-Fi: Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or other network devices. Refer to Wi-Fi for more information. Bluetooth: Use Bluetooth to exchange data or media files with other Bluetooth-enabled devices. Refer to Bluetooth for more information. NFC and payment (NFC-enabled models): Set the device to allow you to read near field communication (NFC) tags that contain information about products. You can also use this feature to make payments and buy tickets for transportation or events after downloading the required apps. Refer to NFC and payment (NFC-enabled models) for more information. Flight mode: Set the device to disable all wireless functions on your device. You can use only non-network services. Follow the regulations provided by the airline and the instructions of aircraft personnel. In cases where it is allowed to use the device, always use it in flight mode. Mobile networks: Configure your mobile network settings. 64 Settings Data usage: Keep track of your data usage amount and customise the settings for the limitation. Set the device to automatically disable the mobile data connection when the amount of mobile data you have used reaches your specified limit. You can activate the data saver feature to prevent some apps running in the background from sending or receiving data. Refer to Data saver for more information. You can also select apps to always use the mobile data even when your device is connected to a Wi-Fi network. Refer to Mobile data only apps for more information. SIM card manager (dual SIM models): Activate your SIM or USIM cards and customise the SIM card settings. Refer to SIM card manager (dual SIM models) for more information. Mobile Hotspot and Tethering: Use the device as a mobile hotspot to share the devices mobile data connection with other devices. For more information about the mobile hotspot, refer to Mobile Hotspot. You may incur additional charges when using this feature. More connection settings: Customise settings to control other features. Refer to More connection settings for more information. Wi-Fi Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or other network devices. Connecting to a Wi-Fi network 1 On the Settings screen, tap Connections Wi-Fi and tap the switch to activate it. 2 Select a network from the Wi-Fi networks list. Networks with a lock icon require a password. Once the device connects to a Wi-Fi network, the device will reconnect to that network each time it is available without requiring a password. To prevent the device from connecting to the network automatically, tap the Auto reconnect switch to deactivate it. If you cannot connect to a Wi-Fi network properly, restart your devices Wi-Fi feature or the wireless router. next to the network and tap 65 Settings Sharing Wi-Fi network passwords If you make a request to a person who is connected to a secured Wi-Fi network to share its password, you can connect to the network without entering the password. This feature is available between the devices which have contacts each other and the screen of the other device must be turned on. 1 On the Settings screen, tap Connections Wi-Fi and tap the switch to activate it. 2 Select a network from the Wi-Fi networks list. 3 Tap Request password. 4 Accept the share request on the other device. The Wi-Fi password is entered on your device and it is connected to the network. Wi-Fi Direct Wi-Fi Direct connects devices directly via a Wi-Fi network without requiring an access point. 1 On the Settings screen, tap Connections Wi-Fi and tap the switch to activate it. 2 Tap Wi-Fi Direct. The detected devices are listed. If the device you want to connect to is not in the list, request that the device turns on its Wi-Fi Direct feature. 3 Select a device to connect to. The devices will be connected when the other device accepts the Wi-Fi Direct connection request. To end the device connection, select the device to disconnect from the list. Sending and receiving data You can share data, such as contacts or media files, with other devices. The following actions are an example of sending an image to another device. 1 Launch the Gallery app and select an image. Wi-Fi Direct and select a device to transfer the image to. 2 Tap 3 Accept the Wi-Fi Direct connection request on the other device. If the devices are already connected, the image will be sent to the other device without the connection request procedure. 66 Settings Bluetooth Use Bluetooth to exchange data or media files with other Bluetooth-enabled devices. Samsung is not responsible for the loss, interception, or misuse of data sent or received via Bluetooth. Always ensure that you share and receive data with devices that are trusted and properly secured. If there are obstacles between the devices, the operating distance may be reduced. Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with your device. Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files or illegally tapping communications for commercial purposes). Samsung is not responsible for the repercussion of illegal use of the Bluetooth feature. 1 On the Settings screen, tap Connections Bluetooth and tap the switch to activate it. Pairing with other Bluetooth devices The detected devices will be listed. 2 Select a device to pair with. If the device you want to pair with is not on the list, set the device to enter Bluetooth pairing mode. Refer to the other devices user manuals. Your device is visible to other devices while the Bluetooth settings screen is open. 3 Accept the Bluetooth connection request on your device to confirm. The devices will be connected when the other device accepts the Bluetooth connection request. To unpair the devices, tap next to the device name to unpair and tap Unpair. Sending and receiving data Many apps support data transfer via Bluetooth. You can share data, such as contacts or media files, with other Bluetooth devices. The following actions are an example of sending an image to another device. 67 Settings 1 Launch the Gallery app and select an image. 2 Tap Bluetooth and select a device to transfer the image to. If the device you want to pair with is not in the list, request that the device turns on its visibility option. 3 Accept the Bluetooth connection request on the other device. NFC and payment (NFC-enabled models) Your device allows you to read near field communication (NFC) tags that contain information about products. You can also use this feature to make payments and buy tickets for transportation or events after downloading the required apps. The device contains a built-in NFC antenna. Handle the device carefully to avoid damaging the NFC antenna. Reading information from NFC tags Use the NFC feature to read product information from NFC tags. 1 On the Settings screen, tap Connections and tap the NFC and payment switch to activate it. 2 Place the NFC antenna area on the back of your device near an NFC tag. The information from the tag appears. Ensure that the devices screen is turned on and unlocked. Otherwise, the device will not read NFC tags or receive data. 68 Settings it. Making payments with the NFC feature Before you can use the NFC feature to make payments, you must register for the mobile payment service. To register or get more information about the service, contact your service provider. 1 On the Settings screen, tap Connections and tap the NFC and payment switch to activate 2 Touch the NFC antenna area on the back of your device to the NFC card reader. To set the default payment app, open the Settings screen and tap Connections NFC and payment Tap and pay PAYMENT, and then select an app. The payment services list may not include all available payment apps. Sending data with the NFC feature Transfer data, such as images or contacts, with other devices by touching your devices NFC antenna to the other devices NFC antenna. 1 On the Settings screen, tap Connections NFC and payment and tap the switch to activate it. 2 Tap the Android Beam switch to activate it. 3 Select an item and touch the other devices NFC antenna to your devices NFC antenna. 4 When Touch to beam. appears on the screen, tap your devices screen to send the item. If both devices try to send data simultaneously, the file transfer may fail. 69 Settings Data saver Reduce your data usage by preventing some apps running in the background from sending or receiving data. On the Settings screen, tap Connections Data usage Data saver and tap the switch to activate it. When the data saver feature is activated, the icon will appear on the status bar. Data saver feature activated To select apps to use data without restriction, tap Allow app while Data saver on and select apps. Mobile data only apps Select apps to always use the mobile data even when your device is connected to a Wi-Fi network. For example, you can set the device to use only mobile data for apps that you want to keep secure or streaming apps that can be disconnected. Even if you do not deactivate the Wi-Fi feature, the apps will launch using the mobile data. On the Settings screen, tap Connections Data usage Mobile data only apps, tap the switch to activate it, and then tap the switches next to the apps you want. You may incur additional charges when using this feature. Mobile Hotspot Use your device as a mobile hotspot to share your devices mobile data connection with other devices. 1 On the Settings screen, tap Connections Mobile Hotspot and Tethering Mobile Hotspot. 2 Tap the switch to activate it. icon appears on the status bar. The You can change the level of security and the password by tapping Configure Mobile Hotspot. 70 Settings 3 On the other devices screen, search for and select your device from the Wi-Fi networks list. on the mobile hotspot screen and scan the QR code with the other Alternatively, tap device. If the mobile hotspot is not found, on your device, tap Configure Mobile Hotspot and deselect Hide my device. More connection settings Customise settings to control other connection features. On the Settings screen, tap Connections More connection settings. Nearby device scanning: Set the device to scan for nearby devices to connect to. Printing: Configure settings for printer plug-ins installed on the device. You can search for available printers or add one manually to print files. Refer to Printing for more information. VPN: Set up virtual private networks (VPNs) on your device to connect to a school or companys private network. Private DNS: Set the device to use the security enhanced private DNS. Ethernet: When you connect an Ethernet adaptor, you can use a wired network and configure network settings. Printing Configure settings for printer plug-ins installed on the device. You can connect the device to a printer via Wi-Fi or Wi-Fi Direct, and print images or documents. Some printers may not be compatible with the device. Adding printer plug-ins Add printer plug-ins for printers you want to connect the device to. 1 On the Settings screen, tap Connections More connection settings Printing Download plugin. 2 Select a printer plug-in and install it. 71 Settings 3 Select the installed printer plug-in. The device will automatically search for printers that are connected to the same Wi-Fi network as your device. 4 Select a printer to add. To add printers manually, tap Add printer. Printing content While viewing content, such as images or documents, access the options list, tap Print All printers..., and then select a printer. Printing methods may vary depending on the content type. Sounds and vibration Options Change settings for various sounds on the device. On the Settings screen, tap Sounds and vibration. Sound mode: Set the device to use sound mode, vibration mode, or silent mode. Vibrate while ringing: Set the device to vibrate and play a ringtone for incoming calls. Temporary mute: Set the device to use silent mode for a certain period. Ringtone: Change the call ringtone. Notification sound: Change the notification sound. Volume: Adjust the devices volume level. Vibration pattern: Select a vibration pattern. System sound: Set the device to sound for actions, such as controlling the touchscreen. Sound quality and effects: Set the devices sound quality and effects. Refer to Sound quality and effects for more information. Separate app sound: Set the device to play media sound from a specific app separately on the other audio device. Refer to Separate app sound for more information. Some features may not be available depending on the model. 72 Settings Sound quality and effects Set the devices sound quality and effects. On the Settings screen, tap Sounds and vibration Sound quality and effects. Dolby Atmos: Select a surround sound mode optimised for various types of audio, such as movies, music, and voice. With Dolby Atmos, you can experience moving audio sounds that flow all around you. Separate app sound Set the device to play media sound from a specific app on the connected Bluetooth speaker or headset. For example, you can listen to the Navigation app through your devices speaker while listening to playback from the Music app through the vehicles Bluetooth speaker. 1 On the Settings screen, tap Sounds and vibration Separate app sound and tap the switch to activate it. 2 Select an app to play media sounds separately and tap the Back button. 3 Select a device for playing the selected apps media sound. Notifications Change the notification settings. On the Settings screen, tap Notifications. Suggest actions and replies: Set the device to suggest actions and replies for notifications. Swipe left or right for snooze: Set the device to show the notification snooze icon when you swipe a notification to the left or right on the notification panel. App icon badges: Set the device to display a number or dot badge on apps that have notifications. Status bar: Set how to display notification icons and whether to show the remaining battery percentage on the status bar. 73 Settings Display Do not disturb: Set the device to mute all sounds except for allowed exceptions. Recently sent: View the apps that received recent notifications and change the notification settings. To customise notification settings for more apps, tap See all All and select an app from the apps list. Options Change the display and the Home screen settings. On the Settings screen, tap Display. Light / Dark: Activate or deactivate dark mode. Dark mode settings: Reduce eye strain by applying the dark theme when using the device at night or in a dark place. You can set a schedule for applying dark mode. The dark theme may not be applied in some apps. Brightness: Adjust the brightness of the display. Adaptive brightness: Set the device to keep track of your brightness adjustments and apply them automatically in similar lighting conditions. Blue light filter: Reduce eye strain by limiting the amount of blue light emitted by the screen. You can set a schedule for applying the blue light filter. Font size and style: Change the font size and style. Screen zoom: Make the items on the screen larger or smaller. Full screen apps: Select apps to use with the full screen aspect ratio. Screen timeout: Set the length of time the device waits before turning off the displays backlight. Home screen: Configure settings for the Home screen, such as the screen layout. Navigation bar: Change the navigation bar settings. Refer to Navigation bar (soft buttons) for more information. Accidental touch protection: Set the device to prevent the screen from detecting touch input when it is in a dark place, such as a pocket or bag. 74 Settings Touch sensitivity: Increase the touch sensitivity of the screen for use with screen protectors. Screensaver: Set the device to launch a screensaver when the device is charging. Some features may not be available depending on the model. Wallpaper Change the wallpaper settings for the Home screen and the locked screen. On the Settings screen, tap Wallpaper. Themes Apply various themes to the device to change the visual elements of the Home screen, locked screen, and icons. On the Settings screen, tap Themes. Lock screen Options Change the settings for the locked screen. On the Settings screen, tap Lock screen. Screen lock type: Change the screen lock method. Smart Lock: Set the device to unlock itself when trusted locations or devices are detected. Refer to Smart Lock for more information. Secure lock settings: Change screen lock settings for the selected lock method. Wallpaper services: Set the device to use wallpaper services such as Dynamic Lock screen. Clock style: Change the type and colour of the clock on the locked screen. 75 Settings Roaming clock: Change the clock to show both the local and home time zones on the locked screen when roaming. FaceWidgets: Change the settings of the items displayed on the locked screen. Contact information: Set the device to show contact information, such as your email address, on the locked screen. Notifications: Set how to show notifications on the locked screen. Shortcuts: Select apps to display shortcuts to them on the locked screen. About Lock screen: View the Lock screen version and legal information. The available options may vary depending on the screen lock method selected. Smart Lock You can set the device to unlock itself and remain unlocked when trusted locations or devices are detected. For example, if you have set your home as a trusted location, when you get home your device will detect the location and automatically unlock itself. On the Settings screen, tap Lock screen Smart Lock and follow the on-screen instructions to complete the setup. This feature will be available to use after you set a screen lock method. If you do not use your device for four hours or when you turn on the device, you must unlock the screen using the pattern, PIN, or password you set. Biometrics and security Options Change the settings for securing the device. On the Settings screen, tap Biometrics and security. Face recognition: Set the device to unlock the screen by recognising your face. Refer to Face recognition for more information. Biometrics preferences: Change the settings for biometric data. 76 Settings Google Play Protect: Set the device to check for harmful apps and behaviour and warn about potential harm and remove them. Security update: View the version of your devices software and check for updates. Google Play system update: View the Google Play system version and check for updates. Find My Mobile: Activate or deactivate the Find My Mobile feature. Access the Find My Mobile website (findmymobile.samsung.com) to track and control your lost or stolen device. Install unknown apps: Set the device to allow the installation of apps from unknown sources. Encrypt or decrypt SD card: Set the device to encrypt files on a memory card. If you reset your device to the factory defaults with this setting enabled, the device will not be able to read your encrypted files. Disable this setting before resetting the device. Other security settings: Configure additional security settings. Some features may not be available depending on the service provider or model. Face recognition You can set the device to unlock the screen by recognising your face. If you use your face as a screen lock method, your face cannot be used to unlock the screen for the first time after turning on the device. To use the device, you must unlock the screen using the pattern, PIN, or password you set when registering the face. Be careful not to forget your pattern, PIN, or password. If you change the screen lock method to Swipe or None, which are not secure, all of your biometric data will be deleted. If you want to use your biometric data in apps or features, you must register your biometric data again. 77 Settings Precautions for using face recognition Before using the face recognition to unlock your device, keep the following precautions in mind. Your device could be unlocked by someone or something that looks like your image. Face recognition is less secure than Pattern, PIN, or Password. For better face recognition Consider the following when using face recognition:

Consider the conditions when registering, such as wearing glasses, hats, masks, beards, or heavy makeup Ensure that you are in a well-lit area and that the camera lens is clean when registering Ensure your image is not blurry for better match results Registering your face For better face registration, register your face indoors and out of direct sunlight. 1 On the Settings screen, tap Biometrics and security Face recognition. 2 Read the on-screen instructions and tap Continue. 3 Set a screen lock method. 4 Position your face inside the frame on the screen. The camera will scan your face. If unlocking the screen with your face is not working properly, tap Remove face data to remove your registered face and register your face again. Unlocking the screen with your face You can unlock the screen with your face instead of using a pattern, PIN, or password. 1 On the Settings screen, tap Biometrics and security Face recognition. 2 Unlock the screen using the preset screen lock method. 3 Tap the Face unlock switch to activate it. 78 Settings 4 On the locked screen, look at the screen. When your face is recognised, you can unlock the screen without using any additional screen lock method. If your face is not recognised, use the preset screen lock method. Deleting the registered face data You can delete face data that you have registered. 1 On the Settings screen, tap Biometrics and security Face recognition. 2 Unlock the screen using the preset screen lock method. 3 Tap Remove face data Remove. Once the registered face is deleted, all the related features will also be deactivated. Privacy Change the settings for privacy. On the Settings screen, tap Privacy. Permission manager: View the list of features and apps that have permission to use them. You can also edit the permission settings. Send diagnostic data: Set the device to automatically send the devices diagnostic and usage information to Samsung. Receive marketing information: Set whether to receive Samsung marketing information, such as special offers, membership benefits, and newsletters. Samsung account privacy: Manage personal data related to your Samsung account and change the settings for Customisation Service. Advanced: Configure advanced settings for privacy. Some features may not be available depending on the service provider or model. 79 Settings Location Change settings for location information permissions. On the Settings screen, tap Location. App permissions: View the list of apps that have permission to access the devices location and edit the permission settings. Improve accuracy: Set the device to use the Wi-Fi or Bluetooth feature to increase the accuracy of your location information, even when the features are deactivated. Recent location requests: View which apps request your current location information. Location services: View the location services your device is using. Accounts and backup Options Sync, back up, or restore your devices data using Samsung Cloud. You can also sign in to accounts, such as your Samsung account or Google account, or transfer data to or from other devices via Smart Switch. On the Settings screen, tap Accounts and backup. Accounts: Add your Samsung and Google accounts, or other accounts, to sync with. Backup and restore: Keep your personal information, app data, and settings safe on your device. You can back up your sensitive information and access it later. You must sign in to your Google or Samsung account to back up or restore data. Samsung Cloud: Manage the content that you want to store securely in Samsung Cloud. Sync and back up your data and settings, and restore the previous devices data and settings even when you do not have it. Refer to Samsung Cloud for more information. Smart Switch: Launch Smart Switch and transfer data from your previous device. Refer to Transferring data from your previous device (Smart Switch) for more information. Regularly back up your data to a safe location, such as Samsung Cloud or a computer, so that you can restore it if the data is corrupted or lost due to an unintended factory data reset. 80 Settings Syncing data Samsung Cloud Sync your devices data with Samsung Cloud and view the data you have synced in each app. You can also back up your devices data to Samsung Cloud and restore it later. You can sync data saved in your device with Samsung Cloud and access it from other devices. 1 On the Settings screen, tap Accounts and backup Samsung Cloud. 2 Tap Settings Sync and auto backup settings Sync. 3 Tap the switches next to the items you want to sync with. When you connect your Samsung account and Microsoft account, you can sync images and videos with Microsoft OneDrive. Backing up data You can back up your devices data to Samsung Cloud. 1 On the Settings screen, tap Accounts and backup Samsung Cloud Back up data. 2 Tick items you want to back up and tap Back up. 3 Tap Done. Some data will not be backed up. To check which data will be backed up, on the Settings screen, tap Accounts and backup Samsung Cloud Back up data. To view the backup data for other devices in your Samsung Cloud, on the Settings

, and screen, tap Accounts and backup Samsung Cloud Restore data then select a device you want. Restoring data You can restore your backup data from Samsung Cloud to your device. 1 On the Settings screen, tap Accounts and backup Samsung Cloud. 2 Tap Restore data 3 Tick items you want to restore and tap Restore. and select a device you want. 81 Settings Google Configure settings for some features provided by Google. On the Settings screen, tap Google. Advanced features Options Activate advanced features and change the settings that control them. On the Settings screen, tap Advanced features. Side key: Select an app or feature to launch using the Side key. Refer to Setting the Side key for more information. Smart pop-up view: Select apps to view their notifications via pop-up windows. When using this feature, you can quickly view the contents via pop-up windows by tapping the icon on the screen. Direct share: Set the device to display the people you contacted on the sharing options panel to allow you to share content directly. Reduce animations: Set the device to reduce the screen effects of certain actions, such as opening or closing apps. Motions and gestures: Activate the motion feature and configure settings. Refer to Motions and gestures for more information. One-handed mode: Activate one-handed operation mode for your convenience when using the device with one hand. Dual Messenger: Install the second app and use two separate accounts for the same messenger app. Refer to Dual Messenger for more information. Send SOS messages: Set the device to send help messages by pressing the Side key several times. Some features may not be available depending on the service provider or model. 82 Settings Motions and gestures Activate the motion feature and configure settings. On the Settings screen, tap Advanced features Motions and gestures. Double tap to wake: Set the device to turn on the screen by double-tapping anywhere on the screen while the screen is turned off. Easy mute: Set the device to mute certain sounds by using motions or gestures. Swipe to call or send messages: Set the device to make a call or send a message when you swipe to the right or left on a contact or a phone number in the Phone or Contacts app. Excessive shaking or an impact to the device may cause an unintended input for some features using sensors. Dual Messenger Install the second app and use two separate accounts for the same messenger app. 1 On the Settings screen, tap Advanced features Dual Messenger. Supported apps will appear. 2 Tap the switch of an app to install the second app. The second app will be installed. The second apps icon will be displayed with

. Second app The Dual Messenger feature may not be available depending on the app. Some features of the app may be limited for the second app. Uninstalling a second app 1 On the Settings screen, tap Advanced features Dual Messenger. 2 Tap the switch of the app you want to uninstall and tap Disable or Uninstall. All data related to the second app will be deleted. If you uninstall the first app, the second app will also be deleted. 83 Settings Digital Wellbeing and parental controls View the history of your device usage and use features to prevent your device from interfering with your life. You can also set up parental controls for your children and manage their digital use. On the Settings screen, tap Digital Wellbeing and parental controls. Screen time: Set goals for how much you use your device a day. Unlocks: Set goals for how many times you unlock your device a day. App timers: Limit the daily usage time for each app by setting a timer. When you reach the limit, the app will be deactivated and you cannot use it. Focus mode: Activate focus mode to avoid distractions from your device and stay focused on what you want. You can use the apps you allowed to be used in focus mode. Wind Down: Activate wind down mode to reduce eye strain before sleeping and prevent your sleep from being disturbed. Parental controls: Manage your childrens digital use. Device care Introduction The device care feature provides an overview of the status of your devices battery, storage, memory, and system security. You can also automatically optimise the device with a tap of your finger. Optimising your device On the Settings screen, tap Device care Optimise now. The quick optimisation feature improves device performance through the following actions. Closing apps running in the background. Managing abnormal battery usage. Scanning for crashed apps and malware. 84 Settings Using the auto optimisation feature You can set the device to perform auto optimisation when your device is not in use. Tap Advanced Auto optimisation and tap the switch to activate it. If you want to set the time to perform auto optimisation, tap Time. Battery Check the remaining battery power and time to use the device. For devices with low battery levels, conserve battery power by activating power saving features. On the Settings screen, tap Device care Battery. Battery usage: View your battery usage and put apps to sleep when they are not being used. Select apps from the apps list and tap the Put app to sleep switch to activate it. Power mode: Select a power mode, such as power saving mode. App power management: Limit battery usage for apps that you do not use often. Charging: Set the device to charge the battery more quickly. Refer to Quick charging for more information. The usage time left shows the time remaining before the battery power runs out. Usage time left may vary depending on your device settings and operating conditions. You may not receive notifications from some apps that use power saving mode. Storage Check the status of the used and available memory. On the Settings screen, tap Device care Storage. To delete files or uninstall apps that you do not use any more, select a category. Then, tick items to select and tap Delete or Uninstall. The actual available capacity of the internal memory is less than the specified capacity because the operating system and default apps occupy part of the memory. The available capacity may change when you update the device. You can view the available capacity of the internal memory in the Specification section for your device on the Samsung website. 85 Settings Memory On the Settings screen, tap Device care Memory. To speed up your device by stopping apps running in the background, tick apps from the apps list, and tap Clean now. Security Check the devices security status. This feature scans your device for malware. On the Settings screen, tap Device care Security Scan phone. Ultra data saving Monitor and reduce your mobile data usage by preventing background apps from using the mobile data connection. You can also use the data compression feature to compress Internet data, such as images, videos, and webpages, accessed via the mobile network. On the Settings screen, tap Device care Ultra data saving, and then tap the switch to activate it. This feature may not be available depending on the service provider or model. Some webpages or content may not be available when this feature is activated, depending on the service provider or the mobile network conditions. Apps Manage the devices apps and change their settings. You can view the apps usage information, change their notification or permission settings, or uninstall or disable unnecessary apps. On the Settings screen, tap Apps. 86 Settings General management Customise your devices system settings or reset the device. On the Settings screen, tap General management. Language and input: Select device languages and change settings, such as keyboards and voice input types. Some options may not be available depending on the selected language. Refer to Adding device languages for more information. Date and time: Access and alter the settings to control how the device displays the time and date. If the battery remains fully discharged, the time and date is reset. Contact us: Ask questions or view frequently asked questions. Reset: Reset your devices settings or perform a factory data reset. Adding device languages You can add languages to use on your device. 1 On the Settings screen, tap General management Language and input Language Add language. To view all the languages that can be added, tap All languages. 2 Select a language to add. 3 To set the selected language as the default language, tap Set as default. To keep the current language setting, tap Keep current. The selected language will be added to your languages list. If you changed the default language, the selected language will be added to the top of the list. To change the default language from your languages list, select the language you want and tap Apply. If an app does not support the default language, the next supported language in the list will be used. 87 Settings Accessibility Configure various settings to improve accessibility to the device. On the Settings screen, tap Accessibility. Screen reader: Activate Voice Assistant, which provides voice feedback. To view help information to learn how to use this feature, tap Tutorial. Visibility enhancements: Customise the settings to improve accessibility for visually impaired users. Hearing enhancements: Customise the settings to improve accessibility for users with hearing impairment. Interaction and dexterity: Customise the settings to improve accessibility for users who have reduced dexterity. Advanced settings: Configure settings for Direct access and notification features. Installed services: View accessibility services installed on the device. About Accessibility: View the Accessibility information. Contact us: Ask questions or view frequently asked questions. Software update Update your devices software via the firmware over-the-air (FOTA) service. You can also schedule software updates. On the Settings screen, tap Software update. Download and install: Check for and install updates manually. Auto download over Wi-Fi: Set the device to download updates automatically when connected to a Wi-Fi network. Last update: View information about the last software update. If emergency software updates are released for your devices security and to block new types of security threats, they will be installed automatically without your agreement. Security updates information Security updates are provided to strengthen the security of your device and protect your personal information. For security updates for your model, visit security.samsungmobile.com. The website supports only some languages. 88 Settings About phone Access your devices information. On the Settings screen, tap About phone. To change your devices name, tap Edit. Status: View various device information, such as the SIM card status, Wi-Fi MAC address, and serial number. Legal information: View legal information related to the device, such as safety information and the open source licence. Software information: View the devices software information, such as its operating system version and firmware version. Battery information: View the devices battery status and information. 89 Appendix Troubleshooting Before contacting a Samsung Service Centre, please attempt the following solutions. Some situations may not apply to your device. You can also use Samsung Members to solve any problems you might encounter while using your device. When you turn on your device or while you are using the device, it prompts you to enter one of the following codes:

Password: When the device lock feature is enabled, you must enter the password you set for the device. PIN: When using the device for the first time or when the PIN requirement is enabled, you must enter the PIN supplied with the SIM or USIM card. You can disable this feature by using the Lock SIM card menu. PUK: Your SIM or USIM card is blocked, usually as a result of entering your PIN incorrectly several times. You must enter the PUK supplied by your service provider. PIN2: When you access a menu requiring the PIN2, you must enter the PIN2 supplied with the SIM or USIM card. For more information, contact your service provider. Your device displays network or service error messages When you are in areas with weak signals or poor reception, you may lose reception. Move to another area and try again. While moving, error messages may appear repeatedly. You cannot access some options without a subscription. For more information, contact your service provider. Your device does not turn on When the battery is completely discharged, your device will not turn on. Fully charge the battery before turning on the device. 90 Appendix The touchscreen responds slowly or improperly If you attach a screen protector or optional accessories to the touchscreen, the touchscreen may not function properly. If you are wearing gloves, if your hands are not clean while touching the touchscreen, or if you tap the screen with sharp objects or your fingertips, the touchscreen may malfunction. The touchscreen may malfunction in humid conditions or when exposed to water. Restart your device to clear any temporary software bugs. Ensure that your device software is updated to the latest version. If the touchscreen is scratched or damaged, visit a Samsung Service Centre. Your device freezes or encounters a fatal error Try the following solutions. If the problem is still not resolved, contact a Samsung Service Centre. If your device freezes or hangs, you may need to close apps or turn off the device and turn it on again. If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it. Restarting the device Forcing restart Resetting the device If the methods above do not solve your problem, perform a factory data reset. Launch the Settings app and tap General management Reset Factory data reset Reset Delete all. Before performing the factory data reset, remember to make backup copies of all important data stored in the device. Calls are not connected Ensure that you have accessed the right cellular network. Ensure that you have not set call barring for the phone number you are dialling. Ensure that you have not set call barring for the incoming phone number. 91 Appendix Others cannot hear you speaking on a call Ensure that you are not covering the built-in microphone. Ensure that the microphone is close to your mouth. If using an earphone, ensure that it is properly connected. Sound echoes during a call Adjust the volume by pressing the Volume key or move to another area. A cellular network or the Internet is often disconnected or audio quality is poor Ensure that you are not blocking the devices internal antenna. When you are in areas with weak signals or poor reception, you may lose reception. You may have connectivity problems due to issues with the service providers base station. Move to another area and try again. When using the device while moving, wireless network services may be disabled due to issues with the service providers network. The battery does not charge properly (For Samsung-approved chargers) Ensure that the charger is connected properly. Visit a Samsung Service Centre and have the battery replaced. The battery depletes faster than when first purchased When you expose the device or the battery to very cold or very hot temperatures, the useful charge may be reduced. Battery consumption will increase when you use certain features or apps, such as GPS, games, or the Internet. The battery is consumable and the useful charge will get shorter over time. 92 Appendix Error messages appear when launching the camera Your device must have sufficient available memory and battery power to operate the camera app. If you receive error messages when launching the camera, try the following:

Charge the battery. Free some memory by transferring files to a computer or deleting files from your device. Restart the device. If you are still having trouble with the camera app after trying these tips, contact a Samsung Service Centre. Photo quality is poorer than the preview The quality of your photos may vary, depending on the surroundings and the photography techniques you use. If you take photos in dark areas, at night, or indoors, image noise may occur or images may be out of focus. Error messages appear when opening multimedia files If you receive error messages or multimedia files do not play when you open them on your device, try the following:

Free some memory by transferring files to a computer or deleting files from your device. Ensure that the music file is not Digital Rights Management (DRM)-protected. If the file is DRM-protected, ensure that you have the appropriate licence or key to play the file. Ensure that the file formats are supported by the device. If a file format is not supported, such as DivX or AC3, install an app that supports it. To confirm the file formats that your device supports, visit the Samsung website. Your device supports photos and videos captured with the device. Photos and videos captured by other devices may not work properly. Your device supports multimedia files that are authorised by your network service provider or providers of additional services. Some content circulated on the Internet, such as ringtones, videos, or wallpapers, may not work properly. 93 Appendix Bluetooth is not working well If another Bluetooth device is not located or there are connection problems or performance malfunctions, try the following:

Ensure that the device you wish to connect with is ready to be scanned or connected to. Ensure that your device and the other Bluetooth device are within the maximum Bluetooth range (10 m). On your device, launch the Settings app, tap Connections, and then tap the Bluetooth switch to re-activate it. On your device, launch the Settings app, tap General management Reset Reset network settings Reset settings Reset to reset network settings. You may lose registered information when performing the reset. If the tips above do not solve the problem, contact a Samsung Service Centre. The screen brightness adjustment bar does not appear on the notification panel Open the notification panel by dragging the status bar downwards, and then drag the notification panel downwards. Tap Quick panel layout and tap the Show brightness on top switch to activate it. A connection is not established when you connect the device to a computer Ensure that the USB cable you are using is compatible with your device. Ensure that you have the proper driver installed and updated on your computer. Your device cannot find your current location GPS signals may be obstructed in some locations, such as indoors. Set the device to use Wi-Fi or a mobile network to find your current location in these situations. 94 Appendix Data stored in the device has been lost Always make backup copies of all important data stored in the device. Otherwise, you cannot restore data if it is corrupted or lost. Samsung is not responsible for the loss of data stored in the device. A small gap appears around the outside of the device case This gap is a necessary manufacturing feature and some minor rocking or vibration of parts may occur. Over time, friction between parts may cause this gap to expand slightly. There is not enough space in the devices storage Delete unnecessary data, such as cache, using the device care feature or manually delete unused apps or files to free up storage space. The Home button does not appear The navigation bar containing the Home button may disappear while using certain apps or features. To view the navigation bar, drag upwards from the bottom of the screen. Removing the battery To remove the battery, contact an authorised service centre. To obtain battery removal instructions, please visit www.samsung.com/global/ecodesign_energy. For your safety, you must not attempt to remove the battery. If the battery is not properly removed, it may lead to damage to the battery and device, cause personal injury, and/or result in the device being unsafe. Samsung does not accept liability for any damage or loss (whether in contract or tort, including negligence) which may arise from failure to precisely follow these warnings and instructions, other than death or personal injury caused by Samsungs negligence. 95 Copyright Copyright 2020 Samsung Electronics Co., Ltd. This manual is protected under international copyright laws. No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system. Trademarks SAMSUNG and the SAMSUNG logo are registered trademarks of Samsung Electronics Co., Ltd. Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide. Wi-Fi, Wi-Fi Direct, Wi-Fi CERTIFIED, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. All other trademarks and copyrights are the property of their respective owners.

Samsung Electronics Co., Ltd. 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Tel: +1-201-937-4203 Authority to Act as Agent Date: __1009,2020_____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______(CTTL,Telecommunication Technology Labs,CAICT)______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____12 months_____ By:

______ ______ _____Jenni Chun_________

(Signature1)

(Print name) Title:

______General Manager________ On behalf of: __Samsung Electronics Co., Ltd. ___

(Company Name) Telephone:

___973-808-6375____ 022818 11 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Samsung Electronics Co., Ltd. 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Tel: +1-201-937-4203 Request for Confidentiality Date: _1009,2020__ Subject: Confidentiality Request for: ____ZCASMA025M____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual _____SAMSUNG Electronics______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

regarding specific information that must accompany these requests. 022818 11 Samsung Electronics Co., Ltd. 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Tel: +1-201-937-4203 IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

/General Manager______

(Signature/Title3) ___Jenni Chun____

(Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

Declaration of changes from Initial to Variant We, Samsung Electronics Co., Ltd., declare that the SM-A025M/DS is the parent product of the SM-A025M

. And declare on our sole responsibility that the product (variant) SM-A025M/DS HW version : REV1.0 SW version : A025M.001 is in all relevant parts identical to the product SM-A025M HW version : REV1.0 SW version : A025M.001 The only difference between SM-A025M/DS and SM-A025M is:

SM-A025M/DS and SM-A025M are just the difference between single and dual cards SOFTWARE MODIFICATIONS: (indicated the changed items if yes) Protocol Stack changes: No MMS/STK/USAT/USIM changes: No DM/SUPL/VT/FUMO/SWP/HCI: No Band Changes: NO Other changes detailed: difference between single and dual cards HARDWARE MODIFICATIONS: (indicated the changed items if yes) Band changes: No PCB Layout changes: No Main RF components changes: No Other same bands changes :NO The description needs to be specificFor exampleantenna, AP, Modem, Transceiver, PA, Rx SAW Filter, Duplexer, ASM etc. FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes): No Other changes detailed: No MECHANICAL MODIFICATIONS: (indicated the changed items if yes) Use new metal front/back cover or keypad: No Mechanical shell changes: No Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed: No OTHER MODIFICATIONS:

APPROVED BY: (Signature) Name:1 Place of Duty:

Date: