Features:
Bluetooth Spec. V2.1+EDR Compliant Class 2 type Output Power Support Firmware Upgrade Built in 16-bit Stereo Codec- 95dB SNR for DAC Size: 54mm x 33.1 mm x 8.2mm Weight: 6g Integrated LED Driver Product Specification BM153-CB1 Class 2 Multimedia Module Qualified CSR, BC57E687C Dec 2011 Product Description:
The BM153-CB1 is a Class 2 Bluetooth sub-system using BlueCore5-
Multimedia External chipset from leading Bluetooth chipset supplier Cambridge Silicon Radio. BM153-CB1 interfaces to 8Mbit of external Flash memory When used with the CSR Bluetooth software stack, it provides a fully compliant Bluetooth system to v2.1+EDR of the specification for data and voice communications The module and device firmware is fully compliant with the Bluetooth specification v2.1+EDR Applications:
Stereo Headset Wireless Speakers System Architecture Specifications:
Operating Frequency Band Bluetooth Specification Output Power Class Operating Voltage Audio Interface Flash Memory Size Dimension Specifications are subject to change without prior notice Spec-BM153-CB1-V2.0 Page 1 of 3 www.sunitec.com.tw 2.4GHz ~ 2.48GHz unlicensed ISM band V2.1+EDR Class 2 5V Analog 8M 54mm x 33.1 mm x 8.2mm Electrical Characteristics Absolute Maximum Rating Storage Temperature Supply Voltage Recommended Operating Conditions Operating Temperature Range Supply Voltage Min
-40C
-0.30V Min
-20C 4.5V Units mA mA mA mA Typ
-90
-10 6
-6
-38
-45
-16 Typ 3 24 0.5 940
-36
-45 Power Consumption SCO Connection HV3 (30ms interval sniff mode) SCO Connection HV1 ACL Data Transfer 115.2Kbps UART no traffic (Master) ACL Data Transfer 115.2Kbps UART no traffic (Slave) VCC = 5V; f = 2.441GHz; T=20C RF Characteristics Receiver Sensitivity at 0.1% BER Maximum Receiver Signal C/I Co-Channel Adjacent Channel Selectivity C/I -1MHz 2nd Adjacent Channel Selectivity C/I -2MHz 3rd Adjacent Channel Selectivity C/I -3MHz Image Rejection C/I VCC = 5V; f = 2.441GHz; T=20C Transmitter RF Output Power RF Power Control Range RF Power Range Control Resolution 20dB Bandwidth for Modulated Carrier 2nd Adjacent Channel Power (+/- 2MHz) 3rd Adjacent Channel Power (+/- 3MHz) VCC = 5V; f = 2.441GHz; T=20C All specifications including pinouts and electrical specifications may be changed without prior notice Pin Configurations Units dBm dBm dB dB dB dB dB Units dBm dB dB KHz dBm dBm Min
-20
Min 0 16
PIN NO. 1 2 3 4 5 6 7 8 9 10 NAME Audio_L Audio_R AGND LED PIO GND 5V GND UART_RX UART_TX TYPE Analogue Analogue GND Open drain output Bi-directional GND Power GND CMOS Input CMOS Output FUNCTION Speaker output, left Speaker output, right Analogue Ground LED Driver Programmable Input/Output Line Ground
+5V Supply Ground UART Data Input (Active High) UART Data Output (Active High) Product Specification Max
+85C
+6.5V Max
+70C 5.5V Average 21 40 4.4 15 Bluetooth Spec
-70
-20 11 0
-30
-40
-9 Bluetooth Spec
-6 to +4
> 16
<1000
-20
-40 Max
-86
11 0
-30
-40
-9 Max
1000
-20
-40 RE-MARK Spec-BM153-CB1-V2.0 Page 2 of 3 www.sunitec.com.tw Ordering Information No Items i-Golf 1 2 3 4 Product Specification Ordering Code (Class 2) Description i-Golf 8M Flash Operating Voltage is DC5V, without CVC i-Golf History Document History Revision Draft V1.0 Draft V2.0 Date 2011-9-15 2011-12-3 Contact Information Sunitec Enterprise Co., Ltd. Head Office:
3F.,No.98-1,Mincyuan Rd Sindian City, Taipei County 231,Taiwan Tel: 886-2-82191696 Fax: 886-2-82191676 http://www.sunitec.com.tw China Factory:
No.2,Qilin Road 2,Run Tang Ind., Dan-Keng Village Fu Ming Community, Guan-lan Town, BaoAn District, Shenzhen GuangDong China Tel: 86-755-28016180 Fax: 86-755-28016097 E-mail: sales@sunitec-cn.com or project@sunitec-cn.com Http://www.sunitec-cn.com Spec-BM153-CB1-V2.0 Page 3 of 3 www.sunitec.com.tw FCC ID: BYG023 Model: BM153-CB1-SJ Notice: The user should not modify or change this equipment without written approval form SANGEAN ELECTRONICS INC. Modification could void authority to use this equipment. Label for end product must include Contains FCC ID: BYG023 or A RF transmitter inside, FCC ID: BYG023. FCC ID Label Graph:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:
If the product is too small to make so many text labels, only need to indicate the FCC ID number on the label, but the above text will be printed in the manual or packaging box. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate the device. The module has been regulatory approved for integrations which meet the following conditions:
1. The radio integration is embedded 2. The antenna must be installed such that 20 cm is maintained between the antenna and users 3. The Type and Gain of the antenna selected for the integration of the external antenna must meet the requirements as detailed in section. Used outside of these conditions will trigger re-approval.