UHF RFID READER F5009 data sheet SANRAY RFID TECHNOLOGY LIMITED All Rights Reserved Copyright Declaration The copyright of this file pertains to SANRAY RFID TECHNOLOGY LIMITED., and is confined to be used only by our clients for software development of SANRAY serial readers. Copy, publication, distribution is prohibited.
* Tel: 0086-755-88363356
* Fax0086-755-22718885
* Zip Code 518000
* http://www.sanray-rfid.com Product Description F5009 is a high-performance reader/writer designed for high challenging RFID application environment. It employs our high efficient M2210 RF module, 9dbi circular polarization antenna and integrates with interfaces of RS232, RS485 and Ethernet, which can realize a reading distance of 20m. It owns a superior multi-tags reading rate and can achieve a tag identification rate of 400tags/s or above. F5009 adopts ABS industrial plastic case. It is waterproof, dustproof and has excellent anti-interference and lightning protection capability. Product Advantage 1. Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment. 2. High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous. 3. Remarkable performance, can achieve a reading distance over 20m for single tag reading. 4. Remarkable performance in intensive tags reading, can attain a tags identification rate of 400tags/s. 5. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software. 6. Adopted integrating RF chip, module performance is more stable, and more 1 suitable for harsh application environment. 7. The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider. 8. Enhanced noise suppression function for reliable data capturing. 9. High precision return signal strength (RSSI). 10. Excellent performance of anti-interference and lightning-proof design. 11. ABS industrial plastic case, rugged and durable. 12. Waterproof and dustproof, production grade is IP64. Product Electrical Parameters NO. Name Parameters 1 2 3 4 5 6 95%+25
-25+65 Working Voltage DC +12V Working Temperature Working Humidity Storage Temperature Tag Protocol Working Frequency
-40+80 902928 MHz EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C Supporting 7 Working Areas China 1, China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan Korea 2 Malaysia Taiwan Software adjustable, step interval 1.0dB, maximum
+30dBm 0.2dBm
-82dBm 1.5 20mrelate to tags type, transmitted power and application environment 400tags/s 115200bps Output Power Output Power Flatness Receiving Sensitivity RF Port Standing Wave Reading Distance Multi-tags Reading Interface Communication Rate Working Temprature Support Detection Intensive Read/Write Mode Support DRM Antenna Connection Support Protection RSSI Support Antenna Type Communication Port Buzzer 9dbi circular polarization antenna RS485RS232DB-9RJ45100M Ethernet port Yes 3 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Enclosure Dimension IP Grade ABS industrial plastic case 28*28*7.5CM IP65 22 23 24 Interface definition Pin NO. Name Description 1 2 3 4 5 6 7 8 9 10 11 12 485-A 485-B GND GND E-6 E-3
+12V GND E-1 E-2 232-RX 232-TX RS485 A RS485 B Ground Ground Ethernet RJ45 PIN6 Ethernet RJ45 PIN3 DC +12 Power supply Ground Ethernet RJ45 PIN1 Ethernet RJ45 PIN2 RS232 RX RX232 TX Physical Dimension 4 Front Back 5 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.