GMAWBL119series_manual_ _ 1 (PANTONE 320C)+BK Wireless Silent BlueLED Mouse Manual//
Wireless User s Manual YouTube 2.4G Wireless Mouse GMAWBL119 FCC ID: 2AMSUWBL119 2.4G Nano Receiver GMAWBL119RC FCC ID: 2AMSUWBL119RC NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Opening Thank you for purchasing this wireless silent blueLED mouse mouse. 2. Caution The company is not liable for any damages, such as live motion defects,data loss, etc., caused by using this product or software. This product is intended for use in general workplaces and homes.The company does not assume responsibility in the event of damages caused by using in any other places. Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required. Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required. Do not use this product on airplanes as it may interfere with the airplane communication system. Please consult your doctor before using this product if you use a pacemaker or other medical device. 3. Warnings Regarding Health Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. 1. LED 2. 1. 2. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc. 4. Specications Wireless System Communication 2.4GHz RF Radio wave system
*The ID between the mouse and the receiver is xed. wooden desk (nonmagnetic material) / approx. radius 10m, steel desk (magnetic material) / approx. radius 2m 800100012001600count per inch blue LED sensor system 2 buttons, 2 side buttons, wheel button (scroll), count switch button Mouse: W84.9D108.6H40mm; approx. 70.8g (excluding batteries) Receiver: W14.1D18.5H6.0mm; approx. 2g Resolution Reading method B u t t o n s Size/Weight range 5. Compatible models Windows (DOS/V) personal computer Apple/Mac series
*For Mac series, side buttons cannot be used.
*Models with a USB port (A-type connector). 3. 4. 2.4GHz RF ID
/ 10m/ 2m 800100012001600count/inch LED 22()
/W84.9D108.6H40mm70.8g
/W14.1D18.5H6.0mm2g 5. Windows (DOS/V) Apple Mac Mac USB A 3. 6. Name of Parts 2 3 Left button / Right button Wheel button (scroll button) Count change button 1 2 3 9 5 6 8 1 4 5 6 7 8 9 4 Back / Forward Button
*cannot be used on Mac series Power switch Blue LED sensor Battery cover Receiver storage slot Receiver 7 3 1 2 3 6. 2 1 Mac LED 4 5 6 7 8 9 6. 3 2 9 5 6 8 1 2 3 DPI 9 5 6 8 4 7 4 4. 2.4GHz RF ID
/ 10m/ 2m 800100012001600DPI LED DPI
/W84.9D108.6H40mm70.8g
/W14.1D18.5H6.0mm2g 5. WindowsDOS/VApple Mac Apple Mac USBA 1 4 5 6 7 8 9 Apple Mac LED 7 GMAWBL119series_manual_ _ 1 (PANTONE 320C)+BK 7. How to Insert Batteries Insert the supplied AAA batteries into the battery compartment slot. Insert the electrode end rst, then insert the body.
*Be careful of polarity when inserting batteries. 8.How to Remove the Receiver Turn the power on the mouse to O and remove the battery The receiver is stored in the receiver storage slot; remove. cover on the backside. Receiver Receiver storage slot Battery cover 10. Troubleshooting Q. Mouse (mouse cursor) doesn t move. A. 1. Make sure that the batteries have been correctly inserted. Make sure that the mouse s power has not been switched to OFF.(see Step 7) 2. The battery level may be low; try replacing the battery.
(see Step 7) Problems specic to Mac products reversed. Q.The forward and backward scroll movements on Mac are A. Please try the following method:
1. On the Apple menu, select Current System Settings 2. Select mouse. 3. Deselect the Scroll Direction: Natural check box. Q. If the mouse is not moved for some time, it takes a few moments to start up. The mouse (mouse cursor) doesn t move. A. If the product is not moved for some time, it enters sleep mode to conserve the battery. Pressing the button on the mouse will restore movement, but it will take a few seconds.
*Replace batteries when the movement of the mouse cursor becomes rough, or when the blue LED sensor does not turn on.
*Turn o mouse when replacing batteries.
*Use new AAA alkaline batteries when replacing batteries.
*Leaving expired batteries in the mouse may result in leakage; be sure to remove batteries when expired. 9.Connection with Mouse
*Warning: It is recommended that other apps are closed before connecting the mouse. Turn on the PC and wait until Windows starts up completely. Connect the receiver to the USB port of your computer. Hardware detection will start automatically and a wizard will launch to update the device driver. Q. The mouse cursor movement is not smooth. A. Although the blue LED is a high performance sensor, there are times when the cursor does not move smoothly when used on a surface that reects light, such as a mirror, or a transparent surface such as glass. Also, the tracking performance may degrade on regularly patterned surfaces. 11. Warranty Term 1 year 12. Inquiries ENsupport-en@sanwa.com 7. 8. OFF LED OFF 9. OS USB 7. 25 8. OFF LED OFF 25 9. Windows USB 10. Q. A. 1. OFF 7 2. 7 Q. A. Q. A. LED 10. Q. A. 1. 7 2. OFF 3. Q. A. Q. A. LED Mac Q. Mac A. 1. Apple 2. 3. 11. 1 12. JP mailsupport@sanwa.co.jp Mac Q.Mac A. 1. 2. 3. 11. 1 12. CNsupport-cn@sanwa.com