FCC ID: 2AMSUBTTB179BK Bluetooth Trackball Mouse

Bluetooth Trackball Mouse Model No: GMABTTB179 Users Guide 1 of 11 Introduction comfortable. Congratulations on your purchase of the most innovative Bluetooth Vertical Trackball Mouse. With the naturally upright and relaxed hand position, you may use the mouse more comfortably. The trackball reduce the use of the wrist and the risk of carpal tunnel syndrome. It offers even more advance that will make you more productive and more Product Features Vertical contour design make you use the mouse in a more natural and relaxed hand 1-to-3 PC switchable position. 400 / 800(default) / 1200 / 1600 dpi switchable Tilt Wheel The state-of-the-art sensor for best tracking performance on the trackball 2*AA Alkaline batteries included. Mouse Dimension: 136.8 x 86 x 67.6 mm This product doesnt include a Bluetooth dongle. The mouse easily connects to computers built with Bluetooth Low Energy The mouse also can be connected to Bluetooth Low Energy dongle through your Bluetooth dongle driver. It is not guaranteed 100%

() Note:

technology. compatible. System Requirements Microsoft Windows 8 /10 or MAC OS X (Button functions may differ on a MAC). O.S. is required to be built with Bluetooth Low Energy technology. 2 of 11 Product Functions 1 2 3 7 6 4 5 4 5 8 10 11 12 9 3 of 11 1. Left Button 2. Right Button 3. Tilt Wheel / Wheel Button 4. 5. Internet Explorer Forward Internet Explorer Backward 6. 34mm diameter trackball 7. One RGB LED indicator: Blue light for PC1, Green Light for PC2, Cyan light for PC3 a. Power ON indicator:

b. PC Switch Indicator:

ON for 6 seconds when Power is switched to ON. ON for 6 seconds when pressing the PC switch button. c. Bluetooth Pairing indicator :

Flashing slowly in Bluetooth pairing mode until pairing is completed. Flash once, twice, three times or four times when switched to 400, 800, 1200 The LED color is indicating the mouse status of PC1/PC2/PC3. RED color as Low Power Indicator: Flash for 6 seconds when battery power is d. DPI Switch indicator:

or 1600 dpi, respectively. low 8. DPI switch button 9. Battery Cover 10. Bluetooth connect button 11. PC switch button to cycle through PC1 / PC2 / PC3 12. Power On/Off Switch

() Note:

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, "to click any button of the mouse" is compulsory to wake it up. Power On/Off:

To save energy for long period of non-usage, switch the On/Off button to Off position to turn off the mouse. 4 of 11 Operation 1. Insert the batteries a. Lift the battery cover up. b. Insert Alkaline battery AA x 2pcs. Please ensure the batteries polarities (+/-) match the battery compartments polarities. c. Close the battery cover. d. Switch the Power on-off switch on the bottom of the mouse to the ON position. e. Meanwhile PC3 Cyan LED is ON for 6 seconds for the first time you switch on the mouse. Battery cover Battery cover 2. PC Switch a. Press the PC switch button to cycle through PC1 PC2 PC3 b. The corresponding PC LED color will be on for 6 seconds PC LED indicator PC1: Blue light PC2: Green light PC3: Cyan light PC Switch Button 5 of 11 3. Bluetooth Pairing a. Press the PC switch button to switch to PC1 or PC2. b. Press the Bluetooth connect button to enter the pairing mode. The corresponding PC LED will flash slowly. Bluetooth connect button PC c. Open Bluetooth setting application by clicking the Bluetooth icon on toolbar. d. Or click Setting, and then select Device to open Bluetooth setting application. 6 of 11 e. Click Add Bluetooth or other device. f. Click Bluetooth. g. Now your computer has found out the Bluetooth mouse. Click it. 7 of 11 h. Now the pairing is completed. The corresponding PC LED flashing stops and the cursors movement mimics that of the mouse. 4. 4-way Scrolling Vertical Scrolling Horizontal Scrolling Roll the wheel up to scroll up; Roll the wheel down to scroll down. Hold the wheel to left to scroll left; Hold the wheel to right to scroll right. Release the wheel to stop scrolling.

() Note:

The 4-way scrolling function depends on applications. If the application supports the 4-way scrolling function, then the mouse will perform it. 5. Clean the trackball holder You may use a pen, through the hole at the mouse bottom, to push out the trackball and clean the trackball holder if dirt is inside. 8 of 11 The mouse, while working if encountering any interference, will automatically source out with the receiver and transfer to another free channel. During the transferring, the cursor movement may have a second The RED LED on the mouse top is the low battery power indicator. Its 6-

seconds flashing indicates that the batteries inside the mouse are needed

() Note:

delay.

() Note:

to be replaced. Trouble Shooting 1. Make sure you have put the batteries in correction directions, and power switch is 2. Make sure you switch to the correct PC that you are working with. 3. For PC1, PC2, PC3, make sure you have finished the pairing between the mouse and your computers. 4. Check in the Bluetooth setting application if Bluetooth status is ON. If not, turn it ON. ON. 5. Make sure your computer is built in Bluetooth 4.0 or 5.0. If not, a Bluetooth 4.0 or 5.0 dongle is required. 6. Replace new batteries if needed when the battery power is low. Battery Use Reminders 1. Remove worn-out batteries from equipment immediately and dispose of them properly. 2. Keep all batteries (used or new) out of the reach of children. 3. Never dispose of batteries in fire. 4. Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries. 5. Remove the batteries from this device if the device will not be used for a long 6. If the performance of the battery decreases substantially, it is time to replace the period of time. battery. 9 of 11 FCC Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

(Example-use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference. And 2) This device must accept any interference received, including interference that may cause undesired operation. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end its life separately from your household waste. There are separate collection system for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. 10 of 11 CAUTION:

RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTION. This product uses non-rechargeable alkaline batteries. 11 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200608009-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

SANWA LIMITED Address: Room 1005, 10/F., Tower 2, Silvercord 30 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong, China Tel.: +86-755-25234082 Fax: +86-755-25234082 E-mail: pm_maze17@126.com Date: 2020/09/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

The RF chip, model PAR2801, which installed in our product Bluetooth Trackball Mouse, Model: GMABTTB179, FCC ID: 2AMSUBTTB179BK, supports BDR (GFSK), EDR (/4-

DQPSK, 8DPSK), BLE 1M, BLE 2M and 2.4G Wireless. For use in America and this chip will not support/enable BDR (GFSK), EDR (/4-DQPSK, 8DPSK), BLE 2M and 2.4G Wireless. The BDR (GFSK), EDR (/4-DQPSK, 8DPSK), BLE 2M and 2.4G Wireless has been shielded by the manufacturer using the software. Sincerely Yours, Signature:

Printed Name: YuzoYamada Title: General Manager

SANWA LIMITED Address: Room 1005, 10/F., Tower 2, Silvercord 30 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong, China Tel.: +86-755-25234082 Fax: +86-755-25234082 E-mail: pm_maze17@126.com FCC Authorization Date: 2020-08-19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, SANWA LIMITED, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. 21 U.S.C. 862. Sincerely Yours, Signature:

YuzoYamada General Manager QA-FR-170-B

SANWA LIMITED Address: Room 1005, 10/F., Tower 2, Silvercord 30 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong, China Tel.: +86-755-25234082 Fax: +86-755-25234082 E-mail: pm_maze17@126.com FCC Confidential Authorization Date: 2020-08-19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AMSUBTTB179BK In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SANWA LIMITED, hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

YuzoYamada General Manager