FCC ID: 2AMSU130 Wireless Mouse

296*105mm,74*105mm, Model:GMA130 Left button DPI/Mode Right button Middle button Right button Left button OLED Display Backward Forward Double click Pair button Recharge port Lens Switch(BT/OFF/.G) User Instruction Remark:

DPI/Mode: Short click for DPI change-///; Long press for Mode button. Only the following buttons can be setting other functions:

Backward Forward Left button Right button Double click Nano Receiver Remark:

Switch(BT/OFF/.G): It is a switch between BT(Bluetooth) and .G wireless and power off. Turn left, enter into Bluetooth; Turn right, enter into .G mode; Keep it on the middle, then power off. Main Features:

. Vertical design, real ergonomics

. High level Pixart sensor PWN

. DPI: ///

. buttons

. Bluetooth+.Ghz, switch freely between wireless modes

. Creative double left and right buttons design

. With OLED display to self-set the function of buttons

. Chargeable vertical mouse with Li-polymer battery, mAh

. m braided charging cable

. Chrome scroll wheel on top

. Bluetooth version: BLE. USB interface Technical Data:

. Mouse size: .*.*.mm

. Weight: g

. OLED size: *mm

. Acceleration: g

. Operating voltage: .V

. Operating current: mA for .G; mA for Bluetooth;

. Standby current: .mA;

. Sleep current: .mA;

Contents of OLED Display Setup & Use Normal Working Interface 85%

DPI : II 1600 2.4G Wireless Mode Connected Setting Mode Interface Setting Mode, No Function. pls press the button which you want to set then enter into the setting interface. Function Menu Interface Interface Left Right Forward Backward Fire VOL+

VOL-

Calculator Interface Copy Cut Paste Desktop Internet Explorer PrtSc Select ALL Screen Lock Dump energy Stage/resolution Working mode(.G or Bluetooth) Connecting status

(Connecting or Connected) Left button Right button Forward button Backward button Double click Cursor symbol Remarks;

The above menu perhaps will be changed when it is upgraded. Setup Under Different Mode

.G mode: put the Switch(BT/OFF/.G) on the position .G , plug the nano receiver into the free USB port of computer. Then it will setup automatically. After seconds, you will find the Connecting status on OLED Display Connected, which means setup successfully. You can enjoy it. Bluetooth mode: put the Switch(BT/OFF/.G) on the position BT press the Pair button and enter into pairing status, then,

() Turn on the computer Bluetooth program

() Press the right mouse button the new Bluetooth device

() Search Bluetooth mouse model for the Bluetooth Mouse

() Press pairing and wait for the computer to install a Bluetooth device When Connected, you will find Connecting status on the OLED Display shows Connected, which means that you can use a Bluetooth mouse. Note: you should finish the Bluetooth pair within minutes. Otherwise you have to pair it again. Make Self-setting Function of Buttons

. Remind again, only buttons can be self- setted. Press DPI/Mode button in seconds, the OLED Display will enter into setting mode interface. Click the button which you want to set, the OLED Display will enter into function menu. Then you can scroll the wheel and chose the function which you want, click the button again and setup successfully, the OLED Display will return back into setting mode interface, you can make setting for other buttons. Once finish your setting, press DPI/Mode button in seconds, exit setting mode interface. For example, you want to set Double click the function Internet Explorer, steps as below:

Step : press DPI/Mode button in seconds, enter into setting mode interface. Setting Mode, No Function. pls press the button which you want to set then enter into the setting interface. Step : click Double click button , enter into function menu interface. Left Right Forward Backward Fire VOL+

VOL-

Calculator Step : scroll Middle button to find the function Internet Explorer. Copy Cut Paste Desktop Internet Explorer PrtSc Select ALL Screen Lock Step : click theDouble click and finish the setting. Display turn back to setting mode interface. Setting Mode, No Function. pls press the button which you want to set then enter into the setting interface. Step : press DPI/Mode button in seconds, back into setting mode interface. Setting Mode, No Function. pls press the button which you want to set then enter into the setting interface. Factory Reset: Press Left & Right button &Middle button at same time in seconds to cancel all self-settings and reset factory setting. Recharge When power of the battery is lower than %, the battery symbol on the OLED Display will be flash, which reminds you to recharge it. Please recharge it accordingly by the charging cable. During recharging, the battery symbol on the OLED Display is rolling. When it is full, it shows capacity %. Package Contents

. Vertical Mouse pc

. Nano Receiver pc

. Charging cable pc

. Instruction Manual pc System Requirement

. For .G mode: compatible with windows /XP/Vista///;

. For Bluetooth mode: compatible with windows /;

Battey included inside of this mouse. Do not burn waste or any waste discarded batteries in householdwaste and should be handled in accordance with local wasteregulations and directives dealing with waste batteries. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Room 1005, 10/F., Tower 2, Silvercord, 30 Canton Road, Tsim Sha Tsui, Kowloon, SANWA LIMITED Hong Kong, China Jan. 13, 2020 Federal Communication Commission Authorization and Evaluation Division FCC ID: 2AMSU130 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below:

1: Block Diagram 2: Schematics 3: Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, SANWA LIMITED Contact person: Yuzo Yamada Title: General Manager

SANWA LIMITED China. Room 1005, 10/F., Tower 2, Silvercord, 30 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong, Limited Agency Agreement SANWA LIMITED FCC ID: 2AMSU130 Jan. 13, 2020 Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:

To Whom It May Concern:

We, SANWA LIMITED hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number (2AMSU130) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (2020-01-13). The Limited Agency Agreement expires until further notice, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely,

[Signature]

SANWA LIMITED Contact person: Yuzo Yamada Title: General Manager