UserGuide Product:Belt SMB001 1. Power on: Switch the Red button of side to On 2Start: Press power button to start, go into Default mode (Time: 25mins, Vibration:5) immediately Powerbutton 3: Operation Press Time-+to adjust the running time, Press Vibration -+ to adjust the Vibration strengthen. till dictators light off, Switch Red button to Off;
4Power off: Press and hold 5ButtonP/ Mode P: Time: 35minsVibration: 5 6ButtonM/Memory mode: Time 15minsVibration: 5 7How to set up your own mode into M?
First adjust the-+ and to make a personal settings, then Press key M and hold 3 second till the LED indicators flashing, its completed, 8How to wake up when remote in Sleep status: Remote will be into sleep status after 2 minswith no operation,
: Stop or start running;
- Press
- other keys, One press, Led indicators light on, Further operation requests one more press. 9Power charge: Stay remote on the Belt base, Use MICRO USB connect with your PC to power your beltalso powering your remote, Red indicator is light on in chargingIt will turn green after full charged. Powerchargeport FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.