FCC ID: 2ACXQ-CL4NXPLUS-MR1 ISO 18000 Mode 2 RFID Read Write Module

oo iPPROV Al | AR

=) (PPA) 04265000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Contains FC ID: SOK-MBHIETARMC2 Contains FOC ID: NGC-SDONLAN Contains FOC ID: OVSMERCURYGE-M Contains IG: 337L-MBHFeTZKAC2 Contains IC: 49086-SDMAN Contains IC: 5407A-MERCURYEEM Contains FCC ID: MMFSATOTR3--C302 This Clase B digital apparatus complies with Canadian ICES-008. C Op Cet apparel numrique de le classe B eet conforme la norme NME-005 do Canada. CMIIT 10: 20144J3133 Seto Mabyale Eeectronics Manu@scturing Sdn, Bhd. Lod 20, Jalan 225, 46100, Putaling Leya, felango Gerul Ehsan, bier MSIP-CMM-SAP-CLANX HEX} /ME=: BAO SATO ASIA PAGIFIG PTE. LTD qH222:

Ge Phgtl= 8 8 Aled ego vs Complies With IDA Standards 77539

32 Burrows Road, St Peters NSW, 2044, Australia Tel: (61) 2 9562 9800 Fax: (61) 2 9518 7620 Email: contact@satovicinity.com ABN. 87 166 705 004 Federal Communications Commission Authorization and Evaluation Division Date: 8 Feb 2022 Confidentiality Request regarding application for certification of FCC ID: 2ACXQ-CL4NXPLUS-MR1 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not File Name Block Diagram.pdf Printer Module Rev B3.pdf, Printer Antenna 6T.pdf Brief Functional Description.pdf customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Tai Wai Pong

32 Burrows Road, St Peters NSW, 2044, Australia Tel: (61) 2 9562 9800 Fax: (61) 2 9518 7620 Email: contact@satovicinity.com ABN. 87 166 705 004 No Yes Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 MODULAR APPROVAL LETTER FCC ID: 2ACXQ-CL4NXPLUS-MR1 Modular Approval Requirement Yes No Modular Approval Requirement

(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements.

(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section.

(v) The modular transmitter must be tested in a stand-alone configuration

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number.

(vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization.

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. 32 Burrows Road, St Peters NSW, 2044, Australia Tel: (61) 2 9562 9800 Fax: (61) 2 9518 7620 Email: contact@satovicinity.com ABN. 87 166 705 004 If a module(s) does NOT meet one or more of the above listed requirements, the applicant may request Limited Modular Approval

(LMA). For LMA, please state details about why the above requirement(s) could not be met; and state how control of the end product, into which the module will be installed, will be maintained by the applicant / manufacturer, such that full compliance of the end product is always ensured:

MR-1 module is installed in the end product by the professionals. Neither antenna nor cable is to be exchanged with any other requirement. Regards, By

(Print Name) __Tai Wai Pong____ Title __Chief Engineer Telephone: ___+612 9562 9800___

32 Burrows Road, St Peters NSW, 2044, Australia Tel: (61) 2 9562 9800 Fax: (61) 2 9518 7620 Email: contact@satovicinity.com ABN. 87 166 705 004 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 18 Jan 2022 SUBJECT: FCC Application for (FCC ID: 2ACXQ-CL4NXPLUS-MR1) To Whom It May Concern:

We, the undersigned, hereby authorize Shabbir Ahmed at EMC Technologies Pty Ltd to act on our behalf, to apply to the Federal Communications Commission for FCC approval of our equipment. Any and all acts carried out by Shabbir Ahmed at EMC Technologies on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, By

(Print Name) __Tai Wai Pong____ Title __Chief Engineer Telephone: ___+612 9562 9800___