FCC ID: PUU-CAMIDWDPHD1 Indoor Smart Camera

FCC Radiation Exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Compliance Statement and Compliance Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. 10 11 Canada IC Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-ex-

empt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionne-

ment. Canada IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with 20cm between the radiator & your body. 12

32.6mm CAMIDWDPHDW1 Indoor Smart Camera cbyge.com FCC ID: PUU-CAMIDWDPHD1 IC: 10798A-CAMIDWDPHD1 Input: 5V 1A Designed in U.S.A. Made in China YYDDDAN XXXXXXXXXXX 36*36mm x / x . x 0.5mm 0.5 0.5 RoHS CbyGE E965M15 SN 1 : 1 2020.09.26 FORMAT 41001E9650001 DESIGNED DRAWN A DATE CHECKED APPROVED NO.

SHENZHEN AONI ELECTRONIC CO., LTD

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Updated References and Contact info Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 Aug-30-202 SCS-F018: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 7.0 Savant Technologies LLC, dba GE Lighting, a Savant Company 2020/11/3 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Savant Technologies LLC, dba GE Lighting, a Savant Company _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: PUU-CAMIDWDPHD1 Product Description: Indoor Smart Camera Model: CAMIDWDPHDW1 Sincerely, Clients signature Clients name / title : Paul Smith / Systems Engineer Safety & Regulatory Contact information / address : 1975 Noble Road, Cleveland, Ohio 44112, United States SCS-F018: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 7.0

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete)

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 Savant Technologies LLC, dba GE Lighting, a Savant Company 2020/11/03 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: PUU-CAMIDWDPHD1 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagram External Photos Internal Photos Users Manual Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos days; or for a specified date of not to exceed 180 days from the Grant Date The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature:

Clients name & title: Paul Smith / Systems Engineer Safety & Regulatory Contact information / address: 1975 Noble Road, Cleveland, Ohio 44112, United States i Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0

WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Approved Date Revision History Initial Release (obsolete) Modify the select options (current) December 22, 2015 September 23, 2016 From Initial 1.0 To 1.0 2.0 SCS-F190 WiFi Channel 12&13 Declaration Letter Created by William Graff Page 1 of 2 Rev.2.0 Approved by Bao-Thuong Nguyen Savant Technologies LLC, dba GE Lighting, a Savant Company WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: PUU-CAMIDWDPHD1 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Paul Smith/ Systems Engineer Safety & Regulatory Signature:

Phone: (216) 266-2189 Email: Paul.smith@ge.com Date: 2020.11.03 SCS-F190 WiFi Channel 12&13 Declaration Letter Created by William Graff Page 2 of 2 Rev.2.0 Approved by Bao-Thuong Nguyen