Instruction Manual G5 RF Document Revision 66065 A Language English Document type Instruction Manual 66065 Document number Rev A Page 2 of 8 Document information Attribute Document Type Title Document No. Language Release date Original Release date (original) Author Company All rights reserved Information Instruction Manual SCANRECO G5 Rocket Flex 66065 English 2013-10-16 English 2013-10-16 SCANRECO SCANRECO AB, SWEDEN Design, equipment, technical data and specifications are subject to change or improvement without prior notice. The text in this instruction manual, or any part of it may not be reproduced or transmitted in any form or by any means, including electronic, mechanical, photocopying, recording, storage in an information retrieval system, or otherwise, without prior written permis-
sion of SCANRECO AB, SWEDEN. Revision history Revision A Date 2013-10-16 Note First release Document type Instruction Manual 66065 Document number Rev A Page 3 of 8 G5 Rocket Flex Transmitter Product description The G5 Rocket Flex HCU is a light weight, impact and water resistant handheld unit equipped with up to fourteen ON/OFF function buttons. It has six configurable Light Emitting Diodes (LED) for machine and status feedback. The buttons and the LEDs can be configured for a variety of different operations. The unit is powered with 3 standard AAA batteries and the backside has a belt clip for convenient at-
tachment on the operators belt. Stop button Led 3 Led 2 Led 1 Button 1 Button 3 Button 5 Button 7 Button 9 Button 11 Button 13 Charge indication Led 4 Led 5 Button 2 Button 4 Button 6 Button 8 Button 10 Button 12 Button 14 Belt clip Battery compartment
(Belt clip removed) Battery compartment
(cover removed) Label Document type Instruction Manual 66065 Document number Rev A Page 4 of 8 Versions The G5 Rocket Flex transmitter exists in the following versions:
G5 RF 10 G5 RF 12 G5 RF 14 G5 RF 10 Display G5 RF 12 Display G5 RF 14 Display Model G5 RF 10 G5 RF 12 G5 RF 14 G5 RF 10 Display G5 RF 12 Display G5 RF 14 Display Functions 10 Push buttons 12 Push buttons 14 Push buttons 10 Push buttons 12 Push buttons 14 Push buttons The models may have the different printed symbols on the buttons, colors, scripts, pictures etc. Functionality The G5 Rocket-Flex systems are required to be configured prior to operation but normally this is done already before delivery. The push buttons are easily programmed to activate any output or series of functions. Button definitions include momentary, interlocked, non-latched or latched output. Document type Instruction Manual 66065 Document number Rev A Page 5 of 8 Technical information Attribute Housing material IP-class Ambient temperature Supply Operating time Weight ISO-13849 for stop function Information Plastic PC IP67
-25C to +70C 3 x AA battery Several months (depending of usage and application) 400g (0,88lb.) including battery Category 3, PL D with G5 CU Rxxx Category 3, PL E with G5 CU Mxxx 34,7mm Dimensions:
69mm 48mm 42,2mm m m 5 3 8
, 2 1 3 m m Document type Instruction Manual 66065 Document number Rev A Page 6 of 8 Radio information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference. The radio transmission takes place within the ISM-band used at pre-defined channels. The channel switching takes place multiple times per second following a pseudorandom se-
quence. This ensures that transmission takes place on an optimal frequency at all times!
No transmitter uses the same pseudorandom sequence order when switching channels; this minimizes the risk of two G5 systems interfering with each other. The G5 Rocket-Flex is approved to transmit on the ISM band. The radio is license free for the end user. Technical information Attribute Frequency Channels management Channel order Channel capacity System address/ID Redundancy Range Information 2,400 - 2,4835 GHz FHSS DSSS THSS Pseudorandom Duplex
<16777216 unique system addresses available CRC-16 100 meters Document type Instruction Manual 66065 Document number Rev A Page 7 of 8zz FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3 (A)/NMB-3(A) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the device is stored on the operators belt it must be shut off. Pressing the buttons and operating the machine while the device is hanging from the belt or any other place it not allowed. It must be held in the hand. Lantenne (s) utilise pour cet metteur doit tre install pour fournir une distance de sparation dau moins 20 cm de toute personne et ne doit pas tre co-localises ou oprant en conjonction avec une autre antenne ou metteur. Lorsque lappareil est stock sur la bande des oprateurs, il doit tre arrt. Appuyant sur les boutons et faire fonctionner la machine alors que lappareil est accroch la ceinture ou tout autre lieu il pas permis. Il doit tre tenu la main.