REFERENCE DESCRIPTION REFERENCE DESCRIPTION LSSMBU09N*
GLASS PANEL, MODUS, 9 BUTTONS LSSMTH08N*
GLASS THERMOSTAT, MODBUS, 8 BUTTONS INSTALLATION INSTRUCTIONS GLASS TOUCH PANEL REFERENCE:
LSSMBU02N*
LSSMBU03N*
LSSMBU04N*
LSSMBU06N*
LSSMBU09N*
LSSMBU10N*
LSSMBU12N*
LSSMTH07N*
LSSMTH08N*
LSSMDN01N*
LSSMDP01N*
LSSMKH03N*
LSSMKH03R*
* : P_A=Product, S_A = Mock-up Sampled REFERENCE DESCRIPTION LSSMBU10N*
GLASS PANEL, MODUS, 10 BUTTONS LSSMBU12N*
GLASS PANEL, MODUS, 12 BUTTONS LSSMKH03N*
GLASS KEYCARD HOLDER, MODBUS Category Reference Description LSSMBU02N*
GLASS PANEL, MODUS, 2 BUTTONS LSSMKH03R*
LSSMBU03N*
GLASS PANEL, MODUS, 3 BUTTONS LSSMDN01N*
LSSMBU04N*
GLASS PANEL, MODUS, 4 BUTTONS LSSMDP01N*
GLASS KEYCARD HOLDER, MODBUS, RFID GLASS DOOR PANEL, MODBUS, NUMBER GLASS DOOR PANEL, MODBUS, NUMBER, PRESENCE LSSMBU06N*
GLASS PANEL, MODUS, 6 BUTTONS LSSMTH07N*
GLASS THERMOSTAT, MODBUS, 7 BUTTONS Glass Touch Panels LSSMBU02N*
Glass Touch Panels LSSMBU03N*
Glass Touch Panels LSSMBU04N*
Glass Touch Panels LSSMBU06N*
Glass Touch Panels LSSMBU09N*
Glass Touch Panels LSSMBU10N*
Glass Touch Panels LSSMBU12N*
Glass Touch Thermostat LSSMTH07N*
Glass Touch Thermostat LSSMTH08N*
Glass Door Panels LSSMDN01N*
Glass Door Panels LSSMDP01N*
Glass Keycard Holders LSSMKH03N*
Glass Keycard Holders LSSMKH03R*
GLASS PANEL, MODBUS, 2 BUTTONS GLASS PANEL, MODBUS, 3 BUTTONS GLASS PANEL, MODBUS, 4 BUTTONS GLASS PANEL, MODBUS, 6 BUTTONS GLASS PANEL, MODBUS, 9 BUTTONS GLASS PANEL, MODBUS, 10 BUTTONS GLASS PANEL, MODBUS, 12 BUTTONS GLASS THERMOSTAT, MODBUS, 7 BUTTONS GLASS THERMOSTAT, MODBUS, 8 BUTTONS GLASS DOOR PANEL, MODBUS, NUMBER GLASS DOOR PANEL, MODBUS, NUMBER, PRESENCE GLASS KEYCARD HOLDER, MODBUS GLASS KEYCARD HOLDER, MODBUS, RFID Dimensions Safety, Installation and Operation Requirements Installation Steps Ensure that the product has been correctly installed and tested engage the side clips. 160 x 95 LSSMBU10N*, LSSMTH08N*
This product must only be installed and serviced by 95 x 95 Dimension LSSMBU02N*, LSSMBU03N*, LSSMBU04N*, LSSMBU06N*, LSSMBU09N*, LSSMBU12N*, LSSMTH07N*, LSSMDN01N*, LSSMKH03N*, LSSMKH 03R*
160 x 120 LSSMDP01N*
Front cover options Glass surface with customizable background color
(Typical colours --- silver, champagne gold, white and black) Supply voltage 24 V DC Current consumption 30 mA Physical interface RS485 Communication protocols Modbus RFID Frequency 13.56 MHz Temperature tolerance 0.5 C / 0.9 F DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Isolate the electrical supply before doing any work on this product. for safe operation before reconnecting the electrical supply. The products are powered by the hotel customer control system power module.The products must be working in the customer control system.The products are input and display devices of human-computer interaction .The products must be used with HRC(Hotel Room Controller) of the customer control system. Failure to follow these instructions will result in death or serious injury. Typically available as follows, and customisable:
Black glass: Available colours: white, amber, blue, light green, red INSTALLATION HAZARD CAUTION Indicator backlight White glass: Available colours: black, grey, amber, blue, red Silver glass: Available colours: black, white, amber, blue, red Gold glass: Available colours: black, white, red Make sure that there is at least a depth of 35mm on a wall box for the glass touch panel. Failure to follow these instructions can result in injury or equipment damage. Mounting Snap-in magnetic mounting Warm up time Typical 20 seconds Operating temperature 0 to 45 C / 32 to 113 F Storage temperature 0 to +60 C / 32 to 140 F Operating humidity 10% - 95% RH, non-condensing IP Class Action IP20 Type 1 Pollution degree 2 Features Back plastic cover Mounting metal plate 2 1 3 4 Separate the mounting metal plate and wall box from the glass 1 touch panel. Unscrew the 2x mounting screws from the mounting metal plate. 2 Install the wall box attached or use the wall box installed. Screw the mounting metal plate to the installed wall box and pull 3 out the power wires (24 V/COM) and Modbus RS485 wires. Connect the Modbus RS485 and power wires to the connectors 4 according to the connection diagram on the product. Push the glass touch panel toward the mounting metal plate to 5 Wiring diagrams TERMINATION DIAGRAM-RS485 VERSION FOR LSSMBU02N*
LSSMBU03N*
LSSMBU04N*
LSSMBU06N*
LSSMBU09N*
LSSMBU12N*
LSSMTH07N*
LSSMDN01N*
LSSMBU10N*
LSSMTH08N*
LSSMDP01N*
GND 24VCC RS485 A Line RS485 B Line TERMINATION DIAGRAM-RS485 VERSION FOR LSSMKH03N*
LSSMKH03R*
RS485 B Line RS485 A Line 24VCC GND 1 0
. v e R 0 0 6 5 8 8 7 H G Q Glass Touch Panel Hotel Series are extra low voltage switch panels connected through the Hotel Room Controller system (HRC System). They provide direct switching from inside a hotel room of lighting, dimming, curtains and air conditioning. If necessary, please insert a small flat screwdriver between the metal mounting plate and the back plastic cover and give a simple turn to detach them. Technical Support and Warranty For technical or warranty queries, contact the Customer Care Centre in your country:
www.schneider-electric.com/contact diecut line folded line Dimension: 255 x 170 mm 85 x 85 mm (folded) Colour: Black Material: 80gsm paper DECN2018 Updated CR and Remove GCR_ &_PTO DECN201716529 Initial Release, 2017/06/12 D ECN /ECN /TCAN N U MBE R :
D ESCR IPTION QGH7885600 Sinda LIN Sinda LIN D RN 01 00 REV Revision:
Sheet:
01 1/1 FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.