companies    
happy holidays!

FCC ID: 2AODL-HY8K1NA1 WiFi Module

by: Schneider Electric IT Corporation latest update: 2024-01-03 model: HY8K1NA1

Five grants have been issued under this FCC ID from 10/31/2023 to 01/03/2024 (this is one of two releases in 2024 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked troubleshooting guides, password defaults, drivers, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
photo label
app s submitted / available
1 2 3 4 5 External Photos External Photos pdf 335.91 KiB October 31 2023
1 2 3 4 5 Label ID Label/Location Info pdf 414.26 KiB October 31 2023
1 2 3 4 5 Attestation Statement Attestation Statements pdf 77.82 KiB January 03 2024
1 2 3 4 5 Cover Letter Cover Letter(s) pdf 126.46 KiB January 03 2024
1 2 3 4 5
Attestation Statements pdf January 03 2024
1 2 3 4 5 RF Exposure Info RF Exposure Info pdf 334.56 KiB January 03 2024
1 2 3 4 5 Change in ID letter Cover Letter(s) pdf 124.10 KiB October 31 2023
1 2 3 4 5
Cover Letter(s) pdf October 31 2023
1 2 3 4 5 Covered list attestation Attestation Statements pdf 99.54 KiB October 31 2023
1 2 3 4 5 Manufacturer authorisation Block Diagram pdf 242.79 KiB October 31 2023
1 2 3 4 5 US Agent letter Attestation Statements pdf 106.85 KiB October 31 2023
1 2 3 4 5 External Photos External Photos pdf 335.91 KiB October 31 2023
1 2 3 4 5 Label ID Label/Location Info pdf 414.26 KiB October 31 2023
1 2 3 4 5 Attestation Statement Attestation Statements pdf 77.82 KiB January 03 2024
1 2 3 4 5 Cover Letter Cover Letter(s) pdf 126.46 KiB January 03 2024
1 2 3 4 5 RF Exposure Info RF Exposure Info pdf 334.56 KiB January 03 2024
1 2 3 4 5 Change in ID letter Cover Letter(s) pdf 124.10 KiB October 31 2023
1 2 3 4 5 Covered list attestation Attestation Statements pdf 99.54 KiB October 31 2023
1 2 3 4 5 Manufacturer authorisation Block Diagram pdf 242.79 KiB October 31 2023
1 2 3 4 5 US Agent letter Attestation Statements pdf 106.85 KiB October 31 2023

frequency equipment class purpose
1 2024-01-03 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
3 2023-10-31 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Change in Identification
4 2412 ~ 2462 DTS - Digital Transmission System
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 Effective 2024-01-03
1 2 3 4 5 2023-10-31
1 2 3 4 5 Applicant's complete, legal business name Schneider Electric IT Corporation
1 2 3 4 5 FCC Registration Number (FRN) 0027014562
1 2 3 4 5 Physical Address 70 Mechanic Street
1 2 3 4 5 Foxborough, MA
1 2 3 4 5 United States
app s TCB Information
1 2 3 4 5 TCB Application Email Address p******@element.com
1 2 3 4 5 P******@element.com
1 2 3 4 5 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 Grantee Code 2AODL
1 2 3 4 5 Equipment Product Code HY8K1NA1
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 Name A******** K********
1 2 3 4 5 Title Senior General Manager Compliance and DVT
1 2 3 4 5 Telephone Number 91 98********
1 2 3 4 5 Fax Number +91 8********
1 2 3 4 5 E-mail A******@se.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 5 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 Equipment ClassDTS - Digital Transmission System
1 2 3 4 5 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)WiFi Module
1 2 3 4 5 WiFi and Bluetooth Module
1 2 3 4 5 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 Change in Identification
1 2 3 4 5 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 Grant CommentsSingle Modular Approval. Power listed is conducted. Device is a 2 x 2 MIMO configuration. This device has 20 and 40 MHz bandwidth modes. This class II permissive change establishes a simultaneous transmitting condition for the Schneider Electric IT Corporation host platform (product name: Inverter, model: HY8K1NA1), the host platform also contains a cellular certified module (FCC ID: N7NHL78C). The Bluetooth function was disabled by software. The antennas are changed to a dipole antenna (model: EX) with maximum 1.28 dBi gain and a chip antenna (model: PF1004) with maximum 3 dBi gain. Radiated spurious emissions and band edge emissions were performed to demonstrate RF compliance, and MPE evaluation was performed to demonstrate RF exposure compliance. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 5 Single Modular Approval. Power listed is conducted. Device is a 2 x 2 MIMO configuration. This device has 20 and 40 MHz bandwidth modes. This class II permissive change establishes a simultaneous transmitting condition for the Schneider Electric IT Corporation host platform (product name: Inverter, model: HY8K1NA1), the host platform also contains a cellular certified module (FCC ID: N7NHL78C). The Bluetooth function was disabled by software. The antennas are changed to a dipole antenna (model: EX) with maximum 2.95 dBi gain and a chip antenna (model: PF1004) with maximum 3 dBi gain. Radiated spurious emissions and band edge emissions were performed to demonstrate RF compliance, and MPE evaluation was performed to demonstrate RF exposure compliance. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 5 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This filing also include the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014).
1 2 3 4 5 Grant Notes (Class Code: DTS): Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This filing also include the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014).
1 2 3 4 5 Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This filing also include the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014).
1 2 3 4 5 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 Firm Name Dongguan NTC CO., Ltd.
1 2 3 4 5 SPORTON International Inc.
1 2 3 4 5 Name J****** H****
1 2 3 4 5 S******** J****
1 2 3 4 5 Telephone Number +86-7********
1 2 3 4 5 +886-******** Extension:
1 2 3 4 5 Fax Number +886-********
1 2 3 4 5 E-mail j******@ntc-c.com
1 2 3 4 5 s******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C 41 CC MO 2412.00000000 2462.00000000 0.2432000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 41 CC MO 5180 5240 0.0499
2 2 15E 41 CC MO ND 5260 5320 0.0525
2 3 15E 41 CC MO 5745 5825 0.0614
2 4 15E 41 CC MO ND 5500 5700 0.0698
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC 5180 5240 0.0499
3 2 15E CC ND 5260 5320 0.0525
3 3 15E CC 5745 5825 0.0614
3 4 15E CC ND 5500 5700 0.0698
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.0049
4 2 15C CC MO 2412 2462 0.2432
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0146000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2A2UNG11P00 ShenZhen FLYSKY Technology Co.,Ltd 2A8D3-BN25 ShenZhen XunYiming Technology Co., Ltd 2ASRT-NPX750 Screeneo Innovation SA 2BDVP-CTA2 Traintrackr LLC 2BF2LAURA3 Shenzhen MiGueR Technology Co.LTD

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC