FCC ID: MRXAG2PH4 TPMS Transmitter

The device under test is manufactured by the grantee (Schrader Electronics) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-

user. Schrader Electronics will supply this document to the reseller/distributor dictating what must be included in the end users manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information (in blue) must be included in the end product users manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.

FCC ID: MRXAG2PH4 IC: 2546A- AG2PH4 This device complies with Part 15 of the FCC Rules and with License exempt RSS standards of Industry Canada. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term IC: before the radio certification number only signifies that Industry Canada technical specifications were met.

SCHRADERELECTRONICS We appoint Joseph D. Brunett on behalf of Willow Run Test Labs. Inc. and Amber Helm Development, LC to act as our agent in the preparation of this application for equipment certification. We certify that submitted documents properly describe the device or system for which equipment certification is sought We also certify that each unit manufactured, imported or marketed, as defined in Industry Canada's regulations will have affixed to ita label identical to that submitted for approval with this application, Further, in accordance with section 6.5 of IC CB-02, we hereby acknowledge that our companys product cannot be distributed, leased or offered for sale in Canada until it's listed on the Industry Caneda Radio Equipment List (REL). For Instances where our authorized agent signs the application for certification on our behalf, we acknowledge that all responsibility for complying with the terms and conditions for Certification. as specified by American Certification Body, Inc. and/or TUV Rheinland Group and/or Vista Laboratories, Inc. still resides with Schrader Electronics Unit 11 ,Technology Park Antrim ,Co Antrim N.lreland,UK BT41 1QS For TCB applications, we certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) regarding certified equipment, Agency Agreement Expiration Date: optional Dated this al _day of _OC7 201F AS KNEE

(Print name) By:

(Signature]

Title: APMMWALS C6 -oRhOAMNZOR email: je hal @ SteesK7h, com Onbehalfof: _ Sthenneh KigeqemtS Schrader Electronics Ltc.

(Company Name) *1 Technology Park Belfast Road Telephone: OLB P4YR S067 Antrim BT41 1QS

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Re: Certication for Schrader Electronics FCC ID: MRXAG2PH4 IC: 2456A-AG2PH4 REQUEST FOR CONFIDENTIALITY Pursuant to USA FCC 47 CFR 0.457(d) and 0.459 and Canada IC RSP-100, Section 10, Schrader Electronics requests that a part of the subject application be held condential. Schrader Electronics has spent substantial eort in developing this product and it is one of the rst of its kind in industry. Having the subject information easily available to competition would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in nancial hardship. Exhibit Exh 04 - Block Diagram Exh 05 - Schematics Exh 10 - BOM + Placement Exh 12 - Modes of Operation Conf. Type Rational Permanent Permanent Permanent Permanent Includes proprietary internal oscillator information. Includes proprietary design information Includes proprietary design information Includes proprietary design information Long Term Condentiality (Permanent): Schrader Electronics requests that any exhibits listed above as permanently condential be permanently withheld from public review. Wherein Long Term Condentiality is not an option for specic exhibits with ISED, this request applies only to the FCC application for those exhibits. Short-Term Condentiality (FCC Only): Schrader Electronics requests that any exhibits selected above as short term condential be withheld from public view for a period of days (noted above) from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 9

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Certication and Engineering Bureau, Innovation, Science and Economic Development Canada 3701 Carling Avenue, Bldg. 94 Ottawa, Ontario K2H 8S2 Re: Certication for Schrader Electronics AG2PH4-F, AG2PH4-D IC: 2456A-AG2PH4 If necessary, we have enclosed application materials for certication of Schrader Electronics AG2PH4-F, AG2PH4-D. It has been veried to comply with ISED RSS-210v10/GENv5. Current Variants:

There are two chassis variants of the EUT, as tested. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 11 Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Federal Communications Commission Equipment Approval Services P.O. Box 358315 Pittsburgh, PA 15251-5315 Re: Certication for Schrader Electronics AG2PH4-F, AG2PH4-D FCC ID: MRXAG2PH4 If necessary, we have enclosed application materials for certication of Schrader Electronics AG2PH4-F, AG2PH4-D. It has been veried to comply with CFR Title 47, Part 15.231. Current Variants:

There are two chassis variants of the EUT, as tested. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 10

Model: AG2PH4 The TPMS Transmitter is installed to the valve stem in each tyre of a vehicle. The unit measures tyre pressure periodically and transmits this information by RF communication to a receiver inside the vehicle. In addition, the TPMS Transmitter performs the following functions:

The main functions, which the TPMS transmitter must perform, are:

Regularly measure the tyre pressure. Detect if motion is present. Use the combination of WAL and PAL protocols to determine which wheel the sensor is located in. This is based on RSSI received and ABS correlation data. Periodically transmit tyre pressures using RF at 433MHz and receive on one to two receivers depending on truck application using a specific RF protocol. Monitor battery condition and transmit to the system during the RF transmission. Sample pressure at a faster rate if a pressure delta occurs. The system must be notified of the pressure fluctuations. Chip Inductor and tuning components are used to poll the ASIC for the detection of a 125KHz LF signal to place the sensor into specific testing modes.