FCC ID: MRXBG2BP4 TPMS Transmitter

Schrader Electronics Ltd Unit 11 Technology Park Belfast Road Antrim, Northern Ireland, BT41 1QS The device under test is manufactured by the grantee (Schrader Electronics), and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc, the grantee must ensure the end-

user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. Schrader Electronics will supply this document to the reseller/distributor dictating what must be included in the end users manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USERS MANUAL The following information (in blue) must be included in the end-product users manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.

IC: 2546A-BG2BP4 FCC ID: MRXBG2BP4 This device complies with Part 15 of the FCC Rules and with ISED Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

3 4 5 REV 01 6 REVISION DESCRIPTION INITIAL RELEASE 7 BY J.J. ECO 8 DATE ECO-XXXXXX DD/MMM/YYYY KEEP OUT- INJECTION POINT 21 18 15 11 07 03 04 05 01 09 08 14 19 XXXX-XXXX-XXXX XXXXX YYMMDD XXXXXXXX MADE IN XXXXX

>PA66-GF13<

M:BG2BP4 CNC ID: H-20958 o C o M o F F C C I D

M R X B G 2 B P 4

R C R M S R D B G 2 B P 4

A N A T E L 0 2 3 8 3

1 8

0 8 0 0 1 C C A H 1 8 L P 1 2 1 0 T 0 I C

2 5 4 6 A B G 2 B P 4

433MHz 17 19 18 20 02 16 06 13 06 MECH CODE SCHRADER PART NUMBER CUSTOMER PART NUMBER 1 01873 TBC 01853 TBC 2 TABLE 4 70503116145 70503116149 70503115693 70503116063 PR3T-1A180-KA PR3T-1A180-LA PR3T-1A180-MA PR3T-1A180-NA TABLE 3 PRODUCTION LOCATION ANTRIM AGUASCALIENTES CHANGZHOU B TABLE 2 PRODUCT MARKINGS SEL CODE BMZJA AK3NA HBKRA COUNTRY OF MANUFACTURE UK MEXICO CHINA LABEL NO. DESCRIPTION TEXT/LOGO

[TEXT FONT: DIN1451]

SIZE REQUIRED COUNTRY OF MANUFACTURE

(REFER TO COLUMN 2 IN TABLE 3) MADE IN XXXXX 0.65mm 2D DATA MATRIX FORD ASSEMBLY No. 2D MATRIX

(ENCODED WITH N/A) SEE TABLE 4 SEL PLANT CODE SEE TABLE 3 ASIC ID

(IN FORMAT: HEXADECIMAL) OPERATING FREQUENCY PRODUCTION DATE MODEL No. MATERIAL CODE XXXXXXXX 433 MHz YYMMDD BG2BP4

>PA66-GF13<

4.0mm x 4.0mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm VALVE BODY ID 2D DATA MATRIX

(CONTAINING MECHANICAL ID XXXXX) 2D MATRIX 10.0mm x 2.5mm CUSTOMER LOGO FoMoCo 5.0mm x 2.4mm PRODUCT DIFFERENTIATION MARKING MANUFACTURERS LOGO 7.5mm x 7.5mm LINE THICKNESS: 0.9mm LEGIBLE A C D E F 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 19 20 21 TABLE 1 COUNTRY APPROVALS LABEL No. REGION AUTHORITY SYMBOL REF CODE/TEXT

[TEXT FONT: DIN1451]

REQ ON SENSOR SIZE REQUIRED SYMBOL TEXT ARGENTINA CNC N/A CNC ID: H-20958 TEXT N/A 0.65mm BRAZIL ANATEL N/A ANATEL 02383-18-08001 TEXT N/A 0.65mm EUROPE CANADA RED IC N/A SYMBOL 5.0mm N/A N/A IC:2546A-BG2BP4 TEXT N/A 0.65mm 18 KOREA SOUTH KCC R-CRM-SRD-BG2BP4 SYMBOL 5.0mm N/A TAIWAN NCC CCAH18LP1210T0 SYMBOL & TEXT 4.0mm 0.65mm REVISION SYMBOL UK USA UK CA N/A SYMBOL 4.0mm N/A FCC N/A FCC ID: MRXBG2BP4 TEXT N/A 0.65mm 10 D R A F T - F O R T E C H N I C A L F E E D B A C K O R Q U O T A T I O N P U R P O S E S O N L Y S U P P L I E R S - P L E A S E N O T E W H E N I N C O M M U N I C A T I O N W I T H S E N S A T A A B O U T D R A F T I T E M S , P L E A S E U S E P A R T N U M B E R T O G E T H E R W I T H 3 D C A D V E R S I O N A S U N I Q U E I D E N T I F I E R O F R E F E R E N C E D 3 D C A D M O D E L D R A W I N G V E R S I O N 3 D C A D V E R S I O N 1 7 P A R T N O . S E E T A B L E 4 FOR REFERENCE ONLY, CHECK LATEST REVISION BEFORE USE. REFER TO PLM FOR CONTROLLED DATA, CHANGE HISTORY AND APPROVALS. TECHNOLOGY PARK, ANTRIM, UK, BT41 1QS PART NUMBER SEE TABLE 4 MATERIAL N/A MASS (g) N/A PROJECT NO. PRJ0009633 THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY OF SCHRADER ELECTRONICS LIMITED. THE INFORMATION CONTAINED WITHIN IT MAY NOT BE USED, DISCLOSED OR REPRODUCED IN WHOLE OR PART, WITHOUT THE EXPRESSED WRITTEN CONSENT OF SCHRADER ELECTRONICS LIMITED. NO RIGHT IS GRANTED TO DISCLOSE OR USE ANY INFORMATION CONTAINED WITHIN THIS DRAWING. SCHRADER ELECTRONICS LIMITED IS PART OF THE SENSATA TECHNOLOGIES GROUP. TITLE INTERPRET DRAWING PER ASME Y14.5-2009 SEE NOTES FOR GENERAL TOLERANCE FORD GEN7 BURNELL LS 25DEG 433 LASER MARKING DRAWING UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS DO NOT SCALE DRAWING THIRD ANGLE PROJECTION SIZE DRAWING NO. DRAWING REV. A3 00017095 01 SCALE 1:1 SOLIDWORKS 2020 SHEET 1 OF 1 ENG-F-044 ISS 05 1 2 3 4 5 6 7 8 A B C D E F

SCHRADERELECTRONICS We appoint Joseph D. Brunett on behalf of Willow Run Test Labs. Inc. and Amber Helm Development, LC to act as our agent in the preparation of this application for equipment certification. We certify that submitted documents properly describe the device or system for which equipment certification is sought We also certify that each unit manufactured, imported or marketed, as defined in Industry Canada's regulations will have affixed to ita label identical to that submitted for approval with this application, Further, in accordance with section 6.5 of IC CB-02, we hereby acknowledge that our companys product cannot be distributed, leased or offered for sale in Canada until it's listed on the Industry Caneda Radio Equipment List (REL). For Instances where our authorized agent signs the application for certification on our behalf, we acknowledge that all responsibility for complying with the terms and conditions for Certification. as specified by American Certification Body, Inc. and/or TUV Rheinland Group and/or Vista Laboratories, Inc. still resides with Schrader Electronics Unit 11 ,Technology Park Antrim ,Co Antrim N.lreland,UK BT41 1QS For TCB applications, we certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) regarding certified equipment, Agency Agreement Expiration Date: optional Dated this al _day of _OC7 201F AS KNEE

(Print name) By:

(Signature]

Title: APMMWALS C6 -oRhOAMNZOR email: je hal @ SteesK7h, com Onbehalfof: _ Sthenneh KigeqemtS Schrader Electronics Ltc.

(Company Name) *1 Technology Park Belfast Road Telephone: OLB P4YR S067 Antrim BT41 1QS

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Re: Certication for Schrader Electronics FCC ID: MRXBG2BP4 IC: 2456A-BG2BP4 REQUEST FOR CONFIDENTIALITY Pursuant to USA FCC 47 CFR 0.457(d) and 0.459 and Canada IC RSP-100, Section 10, Schrader Electronics requests that a part of the subject application be held condential. Schrader Electronics has spent substantial eort in developing this product and it is one of the rst of its kind in industry. Having the subject information easily available to competition would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in nancial hardship. Exhibit Exh 04 - Block Diagram Exh 05 - Schematics Exh 10 - BOM + Placement Conf. Type Rational Permanent Permanent Permanent Includes proprietary internal oscillator information. Includes proprietary design information Includes proprietary design information Exh 09 - Internal Photos Permanent KDB 726920 II3a1: Perm. Epoxy lled, not user accessible. KDB 726920 II3c1: Images Manuf. proprietary and QS controlled. Exh 12 - Modes of Operation Permanent Includes proprietary design information Long Term Condentiality (Permanent): Schrader Electronics requests that any exhibits listed above as permanently condential be permanently withheld from public review. Wherein Long Term Condentiality is not an option for specic exhibits with ISED, this request applies only to the FCC application for those exhibits. Short-Term Condentiality (FCC Only): Schrader Electronics requests that any exhibits selected above as short term condential be withheld from public view for a period of days (noted above) from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 9

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Certication and Engineering Bureau, Innovation, Science and Economic Development Canada 3701 Carling Avenue, Bldg. 94 Ottawa, Ontario K2H 8S2 Re: Certication for Schrader Electronics BG2BP4 IC: 2456A-BG2BP4 If necessary, we have enclosed application materials for certication of Schrader Electronics BG2BP4. It has been veried to comply with ISED RSS-210v10/GENv5. Current Variants:

There is only a single variant of the EUT, as tested. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 11 Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Federal Communications Commission Equipment Approval Services P.O. Box 358315 Pittsburgh, PA 15251-5315 Re: Certication for Schrader Electronics BG2BP4 FCC ID: MRXBG2BP4 Current Variants:

There is only a single variant of the EUT, as tested. If necessary, we have enclosed application materials for certication of Schrader Electronics BG2BP4. It has been veried to comply with CFR Title 47, Part 15.231. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 10