FCC ID: MRXFTMS01 Tyre Pressure Monitor

Schrader Electronics Ltd Unit 11 Technology Park Belfast Road Antrim, Northern Ireland, BT41 1QS User Manual Statement FCC ID: MRXFTMS01 IC: 2546A-FTMS01 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be installed and operated with a minimum separation distance of 5 mm between the equipment and users/bystanders. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimale de 5mm de lusilisateur et des personnes qui lentourent. http://www.tpmseuroshop.com/documents/declaration_conformities

1 2 3 4 NOTES:

1 TEXT FONT - DIN 1451 A EXTENDED. MINIMUM TEXT HEIGHT 0.9mm

- PART NUMBER IS ALPHA NUMERIC PRECEDED BY P/N:

- MODEL ID IS ALPHA NUMERIC PRECEDED BY MODEL ID:

2. SENSOR INSTALLATION TO BE CARRIED OUT AS PER GOODYEAR PROCEDURES #####. INSTALLATION PROCEDURE TO BE REVIEWED AND APPROVED BY SENSATA. 3. NO MARKINGS ON ANY OTHER FACES THAN THOSE DETAILED. 5 REV 01 02 6 REVISION DESCRIPTION INITIAL DRAFT RELEASE DRAFT RELEASE WITH UPDATED VIEWS 7 BY K.B. K.B. ECO 8 DATE DFCO11699 DFCO12075 27/JUN/2023 22/JAN/2024 ISOMETRIC VIEW NOT TO SCALE A B C TABLE 1 MECH CODE 01930 D ITEM 1 2 3 4 5 6 7 8 ITEM 9 10 11 12 13 E F DESCRIPTION SUPPLIER LOGO MANUFACTURE LOCATION ASIC ID RECYCLING MARK PART NUMBER MODEL ID 2D DATA MATRIX TABLE 2 PRODUCT MARKING SIZE REQUIREMENT SENSATA TECHNOLOGIES, 1.85mm HEIGHT MADE IN UK XXXXXXXX 70503117371 FTMS01 5mm MIN. HEIGHT, TEXT HEIGHT 2.0mm 10mm WIDE, 2.5mm HEIGHT. MIN. 0.5mm CLEARANCE ON ALL SIDES ASIC 2D DATA MATRIX 5mm x 5mm TABLE 3 APPROVALS DESCRIPTION EUROPEAN APPROVAL UKCA MARKING FCC MARKING IC MARKING ECE MARKING SIZE REQUIREMENT 2.5mm HEIGHT 2.5mm HEIGHT FCC ID:MRXFTMS01 IC:2546A-FTMS01 CIRCLE 6mm DIAMETER MIN. 7 13 10 9 5 11 12 1 1 Sensata MADE IN UK ASIC ID:XXXXXXXX 10R - 06 XXXX P/N: 70503117371 FCC ID:MRXFTMS01 IC:2546A-FTMS01 MODEL ID: FTMS01 2 3 8 D R A F T - F O R T E C H N I C A L F E E D B A C K O R Q U O T A T I O N P U R P O S E S O N L Y I N C O M M U N I C A T I O N W I T H S E N S A T A A B O U T P L E A S E U S E P A R T N U M B E R T O G E T H E R P L E A S E N O T E S U P P L I E R S I D E N T I F I E R O F R E F E R E N C E D

W H E N D R A F T I T E M S , W I T H 3 D C A D V E R S I O N A S U N I Q U E 3 D C A D M O D E L 3 D C A D V E R S I O N D R A W I N G V E R S I O N 1 7 1 4 6 1 P A R T N O . 7 0 5 0 3 1 1 7 3 7 1 NAME DRAWING SYMBOL ISO 26262 SAFETY RELATED SPECIAL CRITICAL SIGNIFICANT s s s REFER TO (IN ORDER OF PRECEDENCE) APPROVED PRODUCT CONTROL PLAN, THEN SENSATA GLOBAL SUPPLIER QUALITY MANUAL FOR REQUIREMENTS RELATING TO DIMENSIONS AND NOTES MARKED WITH SYMBOLS AS BELOW A CHARACTERISTIC OF AN ITEM ELEMENT OR PRODUCTION PROCESS FOR WHICH REASONABLY FORSEEABLE DEVIATION COULD IMPACT, CONTRIBUTE TO OR CAUSE ANY POTENTIAL REDUCTION OF FUNCTIONAL SAFETY. KEY CHARACTERISTIC WITH SAFETY OR REGULATORY CONSIDERATION. KEY CHARACTERISTICS NOT RELATING TO SAFETY OR REGULATORY CONSIDERATIONS, BUT RELATING TO FIT OR FUNCTION. SPC s USED TO SPECIFY SPC METHODOLOGIES TO BE PERFORMED. STANDARD NON-KEY CHARACTERISTIC. FOR REFERENCE ONLY, CHECK LATEST REVISION BEFORE USE. REFER TO PLM FOR CONTROLLED DATA, CHANGE HISTORY AND APPROVALS. MATERIAL N/A MASS (g) 7.90.1 PROJECT NO. PRJ0015899 REVISION SYMBOL UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY OF SCHRADER ELECTRONICS LIMITED. THE INFORMATION CONTAINED WITHIN IT MAY NOT BE USED, DISCLOSED OR REPRODUCED IN WHOLE OR PART, WITHOUT THE EXPRESSED WRITTEN CONSENT OF SCHRADER ELECTRONICS LIMITED. NO RIGHT IS GRANTED TO DISCLOSE OR USE ANY INFORMATION CONTAINED WITHIN THIS DRAWING. SCHRADER ELECTRONICS LIMITED IS PART OF THE SENSATA TECHNOLOGIES GROUP. INTERPRET DRAWING PER ASME Y14.5-2009 SEE NOTES FOR GENERAL TOLERANCE DO NOT SCALE DRAWING THIRD ANGLE PROJECTION TECHNOLOGY PARK, ANTRIM, UK, BT41 1QS PART NUMBER 70503117371 TITLE GOODYEAR FTMS LASER MARKING DRAWING DRAWING NO. SIZE A3 00020857 SOLIDWORKS 2020 SCALE 2:1 7 DRAWING REV. 02 SHEET 1 OF 1 8 ENG-F-044 ISS 05 1 2 3 4 5 6 A B C D E F

Authority to Act as Agent Date: March 22, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Compliance Engineering Ireland Ltd (Michael Kirby and John McAuley) is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 24th Mar 2025 __________________________ James Kyle __________________

(Print name)

(Signature1) ________ RF Approval Co-ordinator __________________ By:

Title:

On behalf of: ___ Schrader Electronics Ltd _______________________ Telephone:

________02894483067___________________

(Company Name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

Request for Confidentiality Date: April 15, 2024 Subject: Confidentiality Request for FCC ID: MRXFTMS01 IC ID:2546A-FTMS01 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Exhibit Permanent Block Diagrams

--------------------------- External Photos Permanent *1 Internal Photos Permanent Operation Description/Theory of Operation Permanent Parts List & Placement/BOM Permanent Tune-Up Procedure Permanent Schematics

--------------------------- Test Setup Photos Permanent *1 Users Manual ______(Schrader Electronics Ltd )______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ (specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications:

Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: (specify ISED expiration date / date of marketing) . 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 050222-17 Sincerely, By:

(Signature/Title3)

(Print name) _____________James Kyle ____________ 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

Certification Application Attestation Statements Date: January 29, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) ______(Schrader Electronics Ltd)______ certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) ______(Schrader Electronics Ltd)______ (the applicant) certifies that, as of the date of the filing of of this application, the applicant - is / x - is not identified on the Covered List as an entity producing covered equipment. Thank you, By:

(Signature2) _James Kyle__________________

(Print name) 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead. 021423-17 rev 4 _______RF Approvals Co-ordinator___________________ _____Schrader Electronics_____________________Telephone: 00442894 483067 Title:

Company:

__________________________ 021423-17 rev 4

Cover Letter Date: 12.12.2023 MRXFTMS01 Federal Communications Commission Equipment Approval Services P.O. Box 358315 Pittsburgh, PA 15251-5315 FCCID umber:

To whom it may concern:

We, Schrader Electronics Ltd, wish to submit this application to the FCC for the product detailed above. This is a sensor used on automobiles to report tyre pressure on the 433MHz band using a low power transmitter. Standards Applied CFR Title 47, Part 15.231e Sincerely, Name:JAMES MARCUS KYLE Title: RF Approval Coordinator Telephone: -02894423067 Email: jakyle@sensata.com 1/1

Certification designating a U.S. Agent for service of process:

As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must:

i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicants consent and the designated agents obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicants acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council:

The Agent for Process of Service:

cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) Agent can be Individual Entity or a Company Entity Agent Entity must be located in US, US address/phone Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: team@approve-it.net FRN #: 0027533835 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: April 11, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President

*This letter is valid indefinitely for all applications submitted within the period of 04/11/2024 04/10/2025. The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Schrader Electronics Grantee FRN: 0022056402 Grantee Code: MRX Contact Name: James Kyle Street Address: 11 Technology Park, Belfast Rd ,Antrim, Co Antrim ,United Kingdom. City/Province/Zip: BT41 1QS Telephone No: 02894483067 Email:jakyle@sensata.com Applicant Signature:

Date: 11.4.2024 Signed by (Printed Name/Title): James Kyle.RF Approval Co-ordinator