NEXC2 User Manual Product Information Brand: SCOSCHE Product name: Dashcam Product model: NEXC2 Accessory List Main Unit USB Power Cord Car Charger Holder Pry Bar Cable Clips Structure & Button 1. Holder Slot 2. Heat Dissipation Hole 3. TF Card Slot 4. Speaker 5. MIC 6. RESET 7. Front Camera 8. Rear IR Camera 9. WIFI Indicator Light 10. Working Indicator Light 11. Power Button Power Line Wiring Power supplied by car charger:
Please refer to the red dotted line. Specification of car charger:
Input: 12V Output: 5V/3.6A If you use USB line to connect the device with the car charger, please choose the 2.1A output. The undercurrent could lead to malfunction. Device Instruction Switch On/Off and Parking Monitor 1. Switch On/Off The device will switch on/off according to the start-up and stall of the vehicle. You can turn the device off by pressing the power button for more than 3 seconds. 2. Parking Monitor The device is stalled with 500mAh battery. When abnormal vibration is detected, the device will automatically wake up and record a monitoring video and then shutdown. You can use proper charger to prolong the monitor period. Attention:
cut-off in order to save battery power
(1) When charging with a car charger, please do not turn on the device when the vehicle is
(2) A few types of car lighter are sustainable power type. Please switch on/off by hand Indication Light Working Indication Light
(1) Green light slowly flashing (1 per second): front camera recoding
(2) Green light quickly flashing(2 per second): front and rear cameras recoding
(3) Green light on: TF card disconnection/ stop recording
(4) Red light flashing: Firmware updating
(5) Red light on: TF card malfunction/fail to record and etc. WiFi Indicator Light
(1) Blue light on: connected to the App.
(1) The storage temperature should be between -20 to 70
(2) Improper change of battery could lead to explosion. Please use same type of battery
(3) Do not use irritating chemical solvents for cleaning. Slightly wet paper tissue or soft
(4) For environmental protection, please do not throw away or into fire in case of explosion.
(5) Do not try to detach the machine or repair by yourself. If the device failed, please call Attention on the device. cloth are suggested. our customer service. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: IKQNEXC2 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is IC Caution:
subject to the following two conditions:
(1) this device may not cause interference,
(2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICE-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. Caution:
Operating Frequency Range band 5150-5350 MHz for indoor use only.