Report No.: S19042400803003 FCC RADIO TEST REPORT FCC ID: IKQBTFMPD23 Product WIRELESS HANDS-FREE CAR KIT Trade Mark: SCOSCHE Model Name BTFMPD3SR-SP Family Model BTFMPD2 Report No. S19042400803003 Prepared for Scosche Industries Inc 1550 Pacific Ave, Oxnard CA 93033 USA Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn
`
Version.1.2 Page 1 of 35 Report No.: S19042400803003 TEST RESULT CERTIFICATION Applicants name ................. : Scosche Industries Inc Address ................................. : 1550 Pacific Ave, Oxnard CA 93033 USA Manufacture's Name ............ : Scosche Industries Inc Address ................................. :
1550 Pacific Ave, Oxnard CA 93033 USA Product description Product name............................ : WIRELESS HANDS-FREE CAR KIT Model and/or type reference : BTFMPD3SR-SP Family Model BTFMPD2 Rating(s) ................................ : DC 12-24V Standards ............................. : FCC 47 CFR Part 15, Subpart C 15.239 Test procedure ............................... : ANSI C63.10-2013 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personal only, and shall be noted in the revision of the document. Date of Test ........................................... :
Date (s) of performance of tests ............. : May. 27, 2019 ~ Jun. 18, 2019 Date of Issue .......................................... : Jun. 21, 2019 Test Result.............................................. : Pass
:
:
Testing Engineer Technical Manager
(Mary Hu)
(Jason Chen) Authorized Signatory :
(Sam Chen)
`
Version.1.2 Page 2 of 35 Report No.: S19042400803003 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 1.1 TEST FACILITY 1.2 MEASUREMENT UNCERTAINTY 2 . GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT 2.2 DESCRIPTION OF TEST MODES 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 3 . ANTENNA REQUIREMENT 3.1 STANDARD REQUIREMENT 3.2 EUT ANTENNA 3.3 CONDUCTED EMISSION MEASUREMENT 3.3.1 POWER LINE CONDUCTED EMISSION LIMITS 3.3.2 TEST PROCEDURE 3.3.3 DEVIATION FROM TEST STANDARD 3.3.4 TEST SETUP 3.2.5 TEST RESULT 3.4 RADIATED EMISSION MEASUREMENT 3.4.1 RADIATED EMISSION LIMITS 3.4.2 TEST PROCEDURE 3.4.3 DEVIATION FROM TEST STANDARD 3.4.4 TEST SETUP 3.4.5 TEST RESULTS (BLOW 30MHZ) 3.4.6 TEST RESULTS (BETWEEN 30 1000 MHZ) 3.4.7 TEST RESULTS (BAND EDGE EMISSION) 4 . BANDWIDTH TEST 4.1 TEST PROCEDURE 4.2 DEVIATION FROM STANDARD 4.3 TEST SETUP 4.4 TEST RESULTS APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS 4 5 5 6 6 7 8 9 10 11 11 11 12 12 12 12 12 14 18 18 19 19 20 21 22 28 32 32 32 32 33
`
Version.1.2 Page 3 of 35 Report No.: S19042400803003 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards:
FCC Part15, Subpart C (15.239) Standard Section 15.207 15.203 15.239 15.239 15.205 15.239 Test Item Judgment Remark Conducted Emission Antenna Requirement Radiated Spurious Emission Occupied Bandwidth Spurious Emission in Restricted Band Pass Pass Pass Pass Pass
`
Version.1.2 Page 4 of 35 Report No.: S19042400803003 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Baoan District, Shenzhen P.R. China. FCC FRN Registration No.: 463705; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y Uwhere expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2providing a level of confidence of approximately 95 %
No. Item Conducted Emission Test RF power,conducted Uncertainty 1.38dB 0.16dB Spurious emissions,conducted 0.21dB All emissions,radiated(<1G) All emissions,radiated(>1G) Temperature Humidity 4.68dB 4.89dB 0.5C 2%
1 2 3 4 5 6 7 Version.1.2 Page 5 of 35
`
Report No.: S19042400803003 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment WIRELESS HANDS-FREE CAR KIT Trade Name SCOSCHE Model Name BTFMPD3SR-SP Family Model BTFMPD2 Model Difference All models are the same circuit and RF module, except the appearance. The EUT is a WIRELESS HANDS-FREE CAR KIT Product Type Low Power Communication Device Transmitter Product Description Operation Frequency: 88.1-107.9MHz Modulation Type:
Number Of Channel Antenna Designation: Spring Antenna Antenna Gain(Peak) Field Strength:
0.5 dBi 43.25 dBuV/m FM 199CH. DC supply:
Power supply DC 12-24V Adapter supply:
Battery Hard Ware Version Soft Ware Version N/A 1.0 1.0 Note:
1. For a more detailed features description, please refer to the manufacturers specifications or the User's Manual. Version.1.2 Page 6 of 35
`
Report No.: S19042400803003 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Carrier Frequency and Channel list:
Channel Frequency(MHz) 0 1 99 100 197 198 88.1 88.2 98.1 98.2 107.8 107.9 Note: fc=88.1MHz+k0.1MHz k=0 to 198 Pretest Mode Mode 1 Mode 2 Mode 3 Description 88.1MHz 98.1MHz 107.9MHz For Conducted Emission Final Test Mode Mode 1 Description 88.1MHz Note: Three kinds of frequency (88.1MHz, 98.1MHz, 107.9MHz) has been tested, but and the worst result was report. Final Test Mode Mode 1 Mode 2 Mode 3 For Radiated Emission Description 88.1MHz 98.1MHz 107.9MHz Note:
(1) The measurements are performed at the highest, middle, lowest available channels.
(2) During testing, the EUT was actively playing music set to its maximum audio volume in order to generate the worst case emissions (e.g. to generate the maximum bandwidth during bandwidth test). No test tones were used for testing. The tuning range of the EUT was manually verified and the conclusion is that it only works at selected channels within 88.1-107.9MHz, not below and not above this range. Version.1.2 Page 7 of 35
`
Report No.: S19042400803003 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED For AC Conducted Emission Mode EUT C-1 AE-1 DC Power AC PLUG For Radiated Test Cases DC Power EUT For Conducted Test Cases Measurement Instrument C-2 DC Power EUT Note:The temporary antenna connector is soldered on the PCB board in order to perform conducted tests and this temporary antenna connector is listed in the equipment list. Version.1.2 Page 8 of 35
`
Report No.: S19042400803003 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item Equipment Mfr/Brand Model/Type No. Series No. Note AE-1 DC Power N/A N/A N/A Peripherals Item Shielded Type Ferrite Core Length C-1 C-2 DC Cable RF Cable NO YES Note:
NO NO Note 0.5m 0.1m
(1)
(2) The support equipment was authorized by Declaration of Confirmation. For detachable type I/O cable should be specified the length in cm inLengthcolumn. Version.1.2 Page 9 of 35
`
Report No.: S19042400803003 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS Radiation& Conducted Test equipment I t Kind of e m Equipment Spectrum Analyzer Manufacturer Type No. Serial No. Last Calibrated Calibration calibration until period Agilent N9020A MY49100060 2019.05.13 2020.05.12 1 year Test Receiver R&S ESPI 101318 2019.05.13 2020.05.12 1 year 1 2 3 Bilog Antenna TESEQ CBL6111D 31216 2019.04.15 2020.04.14 1 year 4 50 Coaxial Switch Anritsu MP59B 6200983705 2018.05.19 2020.05.18 1 year 5 Horn Antenna EM Amplifier EMC 6 7 8 9 Test Cable
(9KHz-30MHz) Test Cable
(30MHz-1GHz) temporary antenna connector
(Note) EM-AH-1018 0 EMC051835 SE R-01 R-02 2011071402 2019.04.15 2020.04.14 1 year 980246 2018.08.05 2019.08.04 1 year N/A 2017.04.21 2020.04.20 3 year N/A 2017.04.21 2020.04.20 3 year N/A N/A NTS R001 N/A N/A N/A N/A AC Conduction Test equipment Item Kind of Equipment Manufacturer Type No. Serial No. Last Calibrated Calibration calibration until period 1 2 3 4 Test Receiver LISN LISN R&S R&S SCHWARZBE CK 50 Coaxial ANRITSU Switch Test Cable CORP ESCI 101160 2019.05.13 2020.05.12 1 year ENV216 101313 2019.04.15 2020.04.14 1 year NNLK 8129 8129245 2019.05.13 2020.05.12 1 year MP59B 6200983704 2018.05.19 2020.05.18 2 year 5
(9KHz-30MHz N/A C01 N/A 2017.04.21 2020.04.20 3 year
) Test Cable 6
(9KHz-30MHz N/A C02 N/A 2017.04.21 2020.04.20 3 year
) Test Cable 7
(9KHz-30MHz N/A C03 N/A 2017.04.21 2020.04.20 3 year
) Note: Each piece of equipment is scheduled for calibration once a year except the Aux Equipment & Test Cable which is scheduled for calibration every 2 or 3 years. Version.1.2
`
Page 10 of 35 Report No.: S19042400803003 3. ANTENNA REQUIREMENT 3.1 STANDARD REQUIREMENT 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. 3.2 EUT ANTENNA The EUT antenna is permanent attached spring antenna. It comply with the standard requirement. Version.1.2 Page 11 of 35
`
Report No.: S19042400803003 3.3 CONDUCTED EMISSION MEASUREMENT 3.3.1 POWER LINE CONDUCTED EMISSION Limits
(Frequency Range 150KHz-30MHz) Frequency(MHz) 0.15-0.5 0.5-5.0 5.0-30.0 Conducted Emission Limit Quasi-peak 66-56*
56 60 Average 56-46*
46 50 Note: 1. *Decreases with the logarithm of the frequency 2. The lower limit shall apply at the transition frequencies 3. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. The following table is the setting of the receiver Receiver Parameters Attenuation Start Frequency Stop Frequency IF Bandwidth Setting 10 dB 0.15 MHz 30 MHz 9 kHz 3.3.2 TEST PROCEDURE a. The EUT was placed 0.4 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d. LISN at least 80 cm from nearest part of EUT chassis. e. For the actual test configuration, please refer to the related Item EUT Test Photos. 3.3.3 DEVIATION FROM TEST STANDARD No deviation 3.3.4 TEST SETUP Version.1.2 Page 12 of 35
`
Report No.: S19042400803003 Version.1.2 Page 13 of 35
`
Note: 1.Support units were connected to second LISN. 2.Both of LISNs (AMN) are 80 cm from EUT and at least 80cm from other units and other metal planessupport. units.Vertical ReferenceGround Plane40cm80cmTest ReceiverHorizontal ReferenceGround PlaneEUT LISN Report No.: S19042400803003 3.2.5 TEST RESULT EUT Temperature Pressure Test Voltage WIRELESS HANDS-FREE CAR KIT 26 1010hPa DC 12V from DC power AC 120V/60Hz Model Name. BTFMPD3SR-SP Relative Humidity 54%
Phase :
N Test Mode Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin
(MHz)
(dBV) 0.1620 0.1620 0.3699 0.3699 0.4620 0.4620 1.3979 1.3979 18.0858 18.0858 24.2300 24.2300 28.51 1.80 24.45
-0.75 23.67
-0.56 20.73 1.18 21.67 12.77 30.77 29.63
(dB) 9.76 9.76 9.74 9.74 9.74 9.74 9.75 9.75 10.17 10.17 10.65 10.65
(dBV)
(dBV) 38.27 11.56 34.19 8.99 33.41 9.18 30.48 10.93 31.84 22.94 41.42 40.28 65.36 55.36 58.50 48.50 56.66 46.66 56.00 46.00 60.00 50.00 60.00 50.00 Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss.
(dB)
-27.09
-43.80
-24.31
-39.51
-23.25
-37.48
-25.52
-35.07
-28.16
-27.06
-18.58
-9.72 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Version.1.2 Page 14 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Voltage WIRELESS HANDS-FREE CAR KIT 26 1010hPa DC 12V from DC power AC 120V/60Hz Model Name BTFMPD3SR-S P Relative Humidity 54%
Phase :
N Test Mode Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin
(MHz)
(dBV) 0.1676 3.40 0.1700 27.86 0.3540 2.73 0.3780 0.4620 0.4660 1.3180 25.46 24.41 1.45 0.91 1.3740 20.33 18.3339 24.04 18.5499 14.36 24.2340 30.66 24.2340 29.08
(dB) 9.73 9.73 9.75 9.75 9.75 9.75 9.76 9.76 10.17 10.17 10.59 10.59
(dBV)
(dBV)
(dB) Remark 13.13 37.59 12.48 35.21 34.16 11.20 10.67 30.09 34.21 24.53 41.25 39.67 55.07 64.96 48.87 58.32 56.66 46.58 46.00 56.00 60.00 50.00 60.00 50.00
-41.94 AVG
-27.37 QP
-36.39 AVG
-23.11 QP
-22.50 QP
-35.38
-35.33 AVG AVG
-25.91 QP
-25.79 QP
-25.47 AVG
-18.75 QP
-10.33 AVG Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.2 Page 15 of 35
`
Report No.: S19042400803003 EUT WIRELESS HANDS-FREE CAR KIT Model Name BTFMPD3SR-SP Temperature 26 Pressure Test Voltage 1010hPa DC 12V from DC power AC 240V/60Hz Relative Humidity Phase :
54%
L Test Mode Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin
(MHz)
(dBV) 0.1590 28.38 0.1590 2.59 0.3620 24.56 0.3620
-0.64 0.4580 25.14 0.4580 0.60 1.3940 19.66 1.3940 0.66 18.6659 23.34 18.6659 15.80 24.2380 31.57 24.2380 30.44
(dB) 9.75 9.75 9.74 9.74 9.74 9.74 9.75 9.75 10.18 10.18 10.65 10.65
(dBV)
(dBV)
(dB) Remark 38.13 12.34 34.30 9.10 34.88 10.34 29.41 10.41 33.52 25.98 42.22 41.09 65.51 55.51 58.68 48.68 56.73 46.73 56.00 46.00 60.00 50.00 60.00 50.00
-27.38 QP
-43.17 AVG
-24.38 QP
-39.58 AVG
-21.85 QP
-36.39 AVG
-26.59 QP
-35.59 AVG
-26.48 QP
-24.02 AVG
-17.78 QP
-8.91 AVG Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.2 Page 16 of 35
`
Report No.: S19042400803003 EUT WIRELESS HANDS-FREE CAR KIT Model Name BTFMPD3SR-SP Temperature 26 Pressure Test Voltage 1010hPa DC 12V from DC power AC 240V/60Hz Relative Humidity Phase :
54%
N Test Mode Mode 1 Frequency Reading Level Correct Factor Measure-ment Limits Margin
(MHz)
(dBV) 0.1580 28.94 0.1580 2.46 0.3499 26.33 0.3499
-0.28 0.5899 22.20 0.5899
-0.86 1.3859 20.36 1.3859 1.26 18.4539 23.72 18.4539 15.03 24.2379 31.68 24.2379 30.81
(dB) 9.75 9.75 9.73 9.73 9.74 9.74 9.75 9.75 10.18 10.18 10.65 10.65
(dBV)
(dBV)
(dB) Remark 38.69 12.21 36.06 9.45 31.94 8.88 30.11 11.01 33.90 25.21 42.33 41.46 65.56 55.56 58.96 48.96 56.00 46.00 56.00 46.00 60.00 50.00 60.00 50.00
-26.87 QP
-43.35 AVG
-22.90 QP
-39.51 AVG
-24.06 QP
-37.12 AVG
-25.89 QP
-34.99 AVG
-26.10 QP
-24.79 AVG
-17.67 QP
-8.54 AVG Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Version.1.2 Page 17 of 35
`
Report No.: S19042400803003 3.4 RADIATED EMISSION MEASUREMENT 3.4.1 Radiated Emission Limits
( FCC 15.209 ) Frequencies
(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 Note:
Field Strength
(micorvolts/meter) Measurement Distance
(meters) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 300 30 30 3 3 3 3
(1) The tighter limit applies at the band edges.
(2) Emission level (dBuV/m)=20log Emission level (uV/m). LIMITS OF RADIATED EMISSION MEASUREMENT ( FCC 15.239) Frequency of Field Strength of fundamental Emission
(MHz) 88-108
(dBV/m) Peak 68 AVG 48 Notes:
(1) Fcc part15.239 (b) The field strength of any emissions within the permitted 200 kHz band shall not exceed 250 microvolts/meter at 3 meters. The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in Section 15.35 for limiting peak emissions apply. Spectrum Parameter Attenuation Start Frequency Stop Frequency Setting Auto 1000 MHz 10th carrier harmonic RB / VB (emission in restricted band) 1MHz / 1MHz for Peak Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 9kHz~150kHz / RB 200Hz for QP 150kHz~30MHz / RB 9kHz for QP 30MHz~1000MHz / RB 120kHz for QP Version.1.2 Page 18 of 35
`
Report No.: S19042400803003 3.4.2 TEST PROCEDURE a. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz. For frequencies above 1GHz, any suitable measuring distance may be used. b. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3m meter open area test site. The table was rotated 360 degrees to determine the position of the highest radiation. c. The height of the equipment or of the substitution antenna shall be 0.8 m; the height of the test antenna shall vary between 1 m to 4 m. d. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. e. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. f. For the actual test configuration, please refer to the related Item EUT Test Photos. Note:
Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported 3.4.3 DEVIATION FROM TEST STANDARD No deviation Version.1.2 Page 19 of 35
`
Report No.: S19042400803003 3.4.4 TEST SETUP
(a) For radiated emissions below 30MHz Turntable 3m EUT 0.8 m 1.0m Test Receiver Ground Plane Coaxial Cable
(b) For radiated emissions from 30MHz to 1000MHz 3m Test EUT Turntable Receiver
(c) For radiated emissions above 1000MHz Ground Plane 3m 1m to 4m 0.8m Coaxial Cable EUT 1.5 m Turntabl e 1.5 m 4m Amplifie r Test Receiver Version.1.2 Page 20 of 35
`
Report No.: S19042400803003 3.4.5 TEST RESULTS (BLOW 30MHz) EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa TX Model Name. BTFMPD3SR-SP Relative Humidtity Test Voltage 48%
DC 12.0V Polarization :
--
Freq.
(MHz)
--
--
Reading Limit
(dBuV/m)
(dBuV/m)
--
--
--
--
Margin
(dB)
--
--
State P/F PASS PASS Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible limit has no need to be reported. Version.1.2 Page 21 of 35
`
Report No.: S19042400803003 3.4.6 TEST RESULTS (BETWEEN 30 1000 MHZ) EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 88.1MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Vertical Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 47.9938 56.0007 88.0327 17.02 22.55 37.95
(dB) 11.33 6.91 9.96
(dBV/m)
(dBV/m)
(dB) 28.35 29.46 47.91 40.00 40.00 68.00
-11.65
-10.54
-20.09 88.0327 33.29 9.96 43.25 48.00
-4.75 157.5587 187.0956 742.2586 16.22 19.16 6.50 12.03 10.53 27.58 28.25 29.69 34.08 43.50 43.50 46.00
-15.25
-13.81
-11.92 Remark QP QP peak AVG QP QP QP Remark:
1. Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 22 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 88.1MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Horizontal Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 56.9911 80.0806 88.0327 88.0327 153.2004 191.0738 485.6093 19.26 18.15 36.21 31.28 14.38 23.44 10.65
(dB) 6.83 8.74 9.96 9.96 12.61 10.12 21.53
(dBV/m)
(dBV/m)
(dB) 26.09 26.89 46.17 41.24 26.99 33.56 32.18 40.00 40.00 68.00 48.00 43.50 43.50 46.00
-13.91
-13.11
-21.83
-6.76
-16.51
-9.94
-13.82 Remark QP QP peak AVG QP QP QP Remark:
1. Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 23 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 98.1MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Vertical Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 53.8817 22.64 98.1419 27.58 98.1419 22.24 154.2786 15.11 189.0740 19.06 550.9479 731.9202 5.81 6.41
(dB) 7.59 11.32 11.32 12.56 10.30 24.56 27.35
(dBV/m)
(dBV/m) 30.23 38.90 33.56 27.67 29.36 30.37 33.76 40.00 68.00 48.00 43.50 43.50 46.00 46.00
(dB)
-9.77
-29.10
-14.44
-15.83
-14.14
-15.63
-12.24 Remark QP peak AVG QP QP QP QP Remark:
1. Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 24 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 98.1MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Horizontal Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 60.0690 19.89 83.8156 17.28 98.1419 31.62 98.1419 26.94 198.5877 23.47 297.2241 12.76 550.9479 6.51
(dB) 6.48 9.30 11.32 11.32 9.78 15.79 24.56
(dBV/m)
(dBV/m)
(dB) 26.37 26.58 42.94 38.26 33.25 28.55 31.07 40.00 40.00 68.00 48.00 43.50 46.00 46.00
-13.63
-13.42
-25.06
-9.74
-10.25
-17.45
-14.93 Remark QP QP peak AVG QP QP QP Remark:
1. Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 25 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 107.9MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Vertical Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 53.8817 19.82 59.8588 20.77 107.8876 24.31 107.8876 20.33 153.7384 16.18 185.1379 18.90 833.3170 7.70
(dB) 7.59 6.50 12.23 12.23 12.58 10.75 28.42
(dBV/m)
(dBV/m)
(dB) 27.41 27.27 36.54 32.56 28.76 29.65 36.12 40.00 40.00 68.00 48.00 43.50 43.50 46.00
-12.59
-12.73
-31.46
-25.44
-14.74
-13.85
-9.88 Remark QP QP peak AVG QP QP QP Remark:
1. Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 26 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 107.9MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Horizontal Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 61.9951 17.42 81.7831 14.56 107.8876 25.93 107.8876 20.09 178.1325 17.38 192.4183 20.05 552.8831 6.58
(dB) 6.40 8.91 12.23 12.23 10.83 10.02 24.51
(dBV/m)
(dBV/m)
(dB) 23.82 23.47 38.16 32.32 28.21 30.07 31.09 40.00 40.00 68.00 48.00 43.50 43.50 46.00
-16.18
-16.53
-29.84
-15.68
-15.29
-13.43
-14.91 Remark QP QP peak AVG QP QP QP Remark:
1. Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 27 of 35
`
Report No.: S19042400803003 3.4.7 TEST RESULTS (BAND EDGE EMISSION) EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 88.1MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Vertical Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 88 26
(dB) 9.95
(dBV/m)
(dBV/m) 35.95 40
(dB)
-4.05 Remark QP Remark:
Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 28 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 88.1MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Horizontal Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 88 24.99
(dB) 9.95
(dBV/m)
(dBV/m) 34.94 40
(dB)
-5.06 Remark QP Remark:
Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 29 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 107.9MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Vertical Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 108 16.28
(dB) 12.23
(dBV/m)
(dBV/m)
(dB) Detector Type 28.51 43.5
-14.99 QP Remark:
Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 30 of 35
`
Report No.: S19042400803003 EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 20 1010 hPa 107.9MHz Model Name BTFMPD3SR-SP Relative Humidity 48%
Test Voltage DC 12.0V Polarization :
Horizontal Frequency Meter Reading Factor Emission Level Limits Margin
(MHz)
(dBV) 108 21.07
(dB) 12.23
(dBV/m)
(dBV/m) 33.3 43.5
(dB)
-10.2 Detector Type QP Remark:
Factor = Antenna Factor + Cable Loss Pre-amplifier. Version.1.2 Page 31 of 35
`
Report No.: S19042400803003 4. BANDWIDTH TEST 4.1 TEST PROCEDURE a. The EUT was directly connected to the spectrum analyzer and antenna output port as show in the block diagram below, b. Spectrum Setting : RBW= 10KHz, VBWRBW, Sweep time = Auto. 4.2 DEVIATION FROM STANDARD No deviation. 4.3 TEST SETUP Version.1.2 Page 32 of 35
`
Report No.: S19042400803003 4.4 TEST RESULTS EUT Temperature Pressure Test Mode WIRELESS HANDS-FREE CAR KIT 26 1020 hPa TX Model Name BTFMPD3SR-SP Relative Humidity 53%
Test Power DC 12.0V Test Channel Low Mid High Frequency 20 dBc Bandwidth
(MHz) 88.1 98.1 107.9
(KHz) 86.057 95.070 84.196 Limit
(KHz) 200 200 200 Version.1.2 Page 33 of 35
`
Report No.: S19042400803003 The Lowest Channel:88.1MHz The Middle Channel: 98.1MHz Version.1.2 Page 34 of 35
`
Report No.: S19042400803003 The High Channel:107.9MHz Version.1.2 Page 35 of 35
`