FCC ID: 2A2OH-W15-CTEK067 5W wireless charging station with light-up logo

Instruction Manual Manuel dinstruction FRANCAIS Manuel dinstruction 5W wireless charging station with light-up logo Rfrence : CTEK067 Couleur : noir Veuillez lire attentivement le mode d'emploi avant d'utiliser le produit. Spcifications du produit Dimension du produit : 10070130mm Poids : 102g Entre : 5V/3A Sortie USB A : 5V/1A Sortie USB C : 5V/1A Sortie induction : 5W Frquence : 111.8kHz1~146.2kHz Distance pour le chargement induction : 8mm Matriel: ABS Le produit inclut un cble de chargement micro USB. Fonctions principales 1) Le chargeur induction est compatible avec tous les appareils quipps de la technologie induction 2) Une fois le support induction branch, la LED reste allume en pernanence Avertissement !

L'utilisation de votre tlphone pendant le chargement sur le chargeur sans fil peut entraner des tempratures leves. Ne placez pas et n'utilisez pas ce produit prs d'une source de forte chaleur ou dans un environnement humide. Gardez le produit hors de porte des enfants. L'utilisation de votre tlphone pendant le chargement peut provoquer des tempratures plus leves. Dclarations de conformit FCC Cet appareil est conforme la partie 15 des rgles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrences nuisibles et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences susceptibles de provoquer un fonctionnement indsirable. Remarque : cet quipement a t test et dclar conforme aux limites d'un appareil numrique de classe B, conformment la partie 15 des rgles de la FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de l'nergie de frquence radio et, s'il n'est pas install et utilis conformment aux instructions, peut causer des interfrences nuisibles aux communications radio. Cependant, il n'y a aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles la rception radio ou tlvision, ce qui peut tre dtermin en teignant et en rallumant l'quipement, l'utilisateur est encourag essayer de corriger l'interfrence par une ou plusieurs des mesures suivantes :

- Rorientez ou dplacez l'antenne de rception.

- Augmenter la distance entre l'quipement et le rcepteur.

- Branchez l'quipement dans une prise sur un circuit diffrent de celui auquel le rcepteur est connect.

- Consultez le revendeur ou un technicien radio/TV expriment pour obtenir de l'aide. Attention : Les changements ou modifications non expressment approuvs par la partie responsable de la conformit peuvent annuler l'autorit de l'utilisateur faire fonctionner l'quipement. Cet quipement est conforme aux limites d'exposition aux rayonnements de la FCC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. Cet metteur ne doit pas tre co-localis ou fonctionner en conjonction avec une autre antenne ou un autre metteur. Made in China English Instruction manual 5W wireless charging station with light-up logo Reference: CTEK067 Colour: black Please read the instruction manual carefully before using the product. Product Specifications Item dimension: 10070130mm Weight: 102g DC input: 5V/3A USB A output5V/1A USB C output : 5V/1A Wireless output: 5W Working Frequency: 111.8kHz1~146.2kHz The product includes a micro USB charging cable. Key functions 1) The wireless charger is compatible with all devices equipped with the induction technology 2) When the charger is plugged in, the LED lights up. Warning!

Using your phone while charging it on the wireless stand charger can cause higher temperatures. Do not place or use this product near a source of high heat or in a humid environment. Keep the product out of reach of children. Using your phone while charging it can cause higher temperatures. FCC Compliance Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Made in China

CTEK067 DC Input: 5V/3A USB-A Output 5V/1A USB-C Output : 5V/1A Wireless Output: 5W Made in China FCC ID: 2A2OH-W15-CTEK067 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Printing size:37.4 x 15mm Printing size:30*21mm Color: Cool Gray 5 C

SCX DE TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC 1D: 2A2OH-W15-CTEK067 To whom it may concern:

SIGN Vale. Voll 2/2Uce We, the undersigned, hereby authorize Compliance Ce in Compliance Certification Services (Kunshan) Inc to application for equipment authorization with respect to agocuments relating to these matters. Any and all acts the same effect as acts of our own. We, the undersigned, hereby certify that we are not su FCC benefits, pursuant to Section 5301 of the Anti-Drt Where our agent signs the application for certification |

en ee ee a a ee Sa ae ge ne See are Sever, ee Se, ee Se ee Eee See) aes | LeNA eee et ae resides with SCX DESIGN This authorization is valid until further written notice fre rtification Services (Kunshan) Inc and act on our behalf in all manners relating to the FCC ID above, including signing of all varied Out by the agent on our dena Snail Nave bject to a denial of federal benefits, that includes 1g Abuse Act of 1988, 21 U.S.C. 853(a). on our behalf, | acknowledge that all responsibility tin: ce mented bey SS Riek Aeasdae Te coe ee ee ek ae! ee! ee See ae a! Ee eg kee | eT m the applicant. Sincerely, Print Name: Caroline Vanderschooten Signature:

Lach On behalf of Company: SCX DESIGN 14, avert Telephone: +33.1.86.95.99.88 we E-mail: caroline@scx.design.com Title: purchasing and marketing manaqer

SCX DESIGN TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for 2A2OH-W15-CTEK067 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DO1 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manuals Sincerely, Print Name: Caroline Vanderschooten Title: purchasing and marketing manager Signature:

le sa" one's aces eck 087 PAR A\

On behalf of Company: SCX DESIGN 1 aver Oe ox Ser coe FEROS 4, 600 Telephone: +33.1.86.95.99.88 Wears 82 E-mail: caroline@scx.design.com

SCX DESIGN Cover Letter-Wireless Charger Approval Date: 08/12/2022 Gentlemen:

Theres a wireless charger that would like to have your authorization as a wireless power transfer applications approval. The specific product as below, wireless charger, with its designed features and specified description, meets special requirements for KDB 680106 DO1 section 5.2 requirements. Company: SCX DESIGN Product Name: 5W Wireless Charing Station with Light-Up Logo Model Number: CTEKO67 FCC ID: 2A20H-W15-CTEKO67 KDB 680106 DO1 Section 5.2 Requirements Product Technical Specification a) Power transfer frequency is less that 1 MHz b) Output power from each primary coil is less than | 5W or equal to 15 watts. c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only f) The aggregate H-field strengths at 15 cm Please refer to RF exposure report surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, Print Name: Caroline Vanderschooten Title: purchasing and marketing manager Signature: |

aces SCX Design On behalf of Company: SCX DESIGN 74, avenue de Villiers 75017 PARIS Telephone: +33.1.86.95.99.88 scx@scx.design

: : : N TVA : FRO3824606891 E-mail: caroline@scx.design.com RCS PARIS 824 606 891