FCC ID: EMOICVBT80A 9 Inch Double Sided Portable Vanity Mirror with Bluetooth Mono Speaker

iCVBT80 Vanity Mirror - Quick Start Guide (English) Size: 153 x 140 mm (folded) Color: 2C + 2C (PMS Cool Gray 9C & PMS 2705C) Material: 157gsm Art paper Dec. 12, 2020 PMS Cool Gray 9C PMS 2705C Cover page iHome Beauty LUX P R O iCVBT80 Quick Start Guide Charging Mirror

Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet. outlet Red Battery Status LED Bluetooth Button Charging Devices Mirror MUST be connected to power for USB charging from the unit. Connect USB cable (not included) to USB port and the other end to your device to charge. Battery Level Indicators Red Battery Status LED Charging = solid red Fully charged = off Low Battery = flashing red (mirror is ON, not being charged) Light Function Press and hold the Light Button to adjust the lighting mode:

Soft Yellow, Warm White, or Bright White Press and release the Light Button to select a brightness level:

Hi/Mid/Lo/OFF Detail Mirror + Cleaning Cloth Removable Detail Mirror The back of the 10x magnifying detail mirror has SimpleStick micro suction material for easily attaching and detaching almost anywhere on non-porous surfaces. If necessary, clean SimpleStick material with office tape. Cleaning Cloth Use the included cleaning cloth to keep the large surface and detail mirror smudge free. Bluetooth Audio Function Press power button to turn speaker On or Off When mirror is On, press and hold the Bluetooth button on back of mirror for 2 seconds for pairing mode, indicated by the blinking Voice Button Select iHome LUX PRO on your devices Bluetooth menu to connect To cancel pairing, press the Bluetooth button again To reset Bluetooth, press and hold Bluetooth button for 10 seconds Press to play / pause Bluetooth audio Press to answer/end Bluetooth calls Press and hold for 2 seconds to decline Bluetooth calls Quick double press for next track Quick triple press for previous track Press and hold for 2 seconds and wait for beep to activate voice control with Siri / Google Assistant Press to lower or raise volume Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri/Google Assistant to play music and more. RESET mirror: if operation freezes or unit otherwise fails to respond properly, reset the unit by inserting the end of a paper clip or similar into the Reset Port located on the bottom of the mirror. Bluetooth settings will not be affected. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:

Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. 2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 5. Only use attachments/accessories specified by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service This product should be serviced by qualified service personnel when:

8. No naked flame sources, such as lighted candles, should be placed on this product. 9. Attention should be drawn to the environmental aspects of battery disposal. 10. This product is suitable for use in tropical and/or moderate climates.

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. WARNING:

- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

- Do not dispose of batteries in the household trash or fire.

- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.

- Sunlight: Never place the mirror in or expose the mirror to direct sunlight. The suns rays can reflect to become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modification non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3(B) / NMB-3(B) iCVBT80QSG-201212-A Printed in China WARRANTY For product support information and warranty please visit:

www.ihome.com/support 2021 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihome.com

V3 iCVBT80 Mitchell Bailey 10.02.2020 Model:

HVIN:

Service Number:

AC Adaptor:

USB Output:

iHome Beauty LUX PRO iCVBT80 iCVBT80a iCVBT80-A-A DC 9V, 2.5A DC 5V, 1A Manufactured and Serviced by SDI Technologies Inc. Designed in the USA Patents: www.ihome.com/patents www.ihome.com Made in China FCC ID: EMOICVBT80A IC: 986B-ICVBT80A Model Plate Size: 35.3 x 25.3mm Color: REF. DL RED - Debossed 0.3mm Blue - Debossed 0.3mm RESET BOTTOM RED - Silk Screen Graphic iHome logo See DL for color iHome Logo 10.5mm spacing from buttons Prevent icons from becoming distorted when applied PINK - Masked silk screen graphics, backlit with white LED FRONT USB LED BACK Blue - Debossed 0.3mm iCVBT80 GAW 10.02.2020 | v3

SDI TECHNOLOGIES INC. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOICVBT80A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, David Stetin 2020-12-21 Rev 11/20/07

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Trademark FCC Model no. iHome EMOICVBT80A iCVBT80, iCVBT80SN, iCVBT80XX

(XX denote different cabinet color) Production name 9Double Sided Portable Vanity Mirror with Bluetooth Mono Speaker Confirmed by:

David Stetin 2020-12-21

SDI TECHNOLOGIES INC. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for (FCC ID: EMOICVBT80A) Date: 2020-12-21 To Whom It May Concern:

We, the undersigned, hereby authorize EMTEK (DONGGUAN) CO., LTD. at Sam Lvon our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin 2020-12-21 E:\ED200103042E ES200103045 KID iBT780 FCC ID\work\POA_Letter_140225.docx