FCC ID: EMOB36A B36VM Bluetooth Headphones

XX-B36 IB (English) Size: 120 x 150 mm (folded: 60 x 37.5 mm) Printing color: Black (1C + 1C) Material: 80 gsm WF paper Jan. 23, 2020 FRONT BACK Model: B36 Series Wireless Headphones Product Marketing Name (PMN)SM-B36VM.EXv0 CHARGE BEFORE USE CHARGING THE HEADPHONES USB charging cable

(included) USB AC adaptor

(not included) The LED indicator (located on the right ear cup) will glow red while the headphones are charging, and will automatically turn off once fully charged.

- Press and hold the Button for 2 seconds to turn the headphones ON or OFF. POWER ON/OFF BLUETOOTH PAIRING

- Press and hold the Button for 2 seconds to turn the headphones ON. The headphones will enter pairing mode and the LED indicator will flash blue and red.

- Select ekids B36VM on your Bluetooth-enabled device to connect.

- A tone prompt will sound to indicate pairing is complete. Once paired, the headphones will automatically connect to your Bluetooth device whenever it is in range.

- When audio is playing, press the Button to play or pause.

- Use the controls on your device to navigate tracks and adjust the volume of streaming

- If no audio is playing for 60 minutes, the unit will automatically shut off to conserve the battery. Press the Button to resume operation. audio. SPEAKERPHONE

- Press the Button to accept an incoming phone call.

- Press and hold the Button to to reject an incoming call.

- Press the Button to end a phone call. FCC ID : EMOB36A IC : 986B-B36A HVIN : B36a FCC Information

. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 the users authority to operate the equipment. of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3(B) IC Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1 Do not use this product near water, and clean only with dry cloth. 2 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 3 Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances

(including amplifiers) that produce heat. 4 Only use attachments/accessories specified by the manufacturer. 5 Unplug this product during lightning storms or when unused for long periods of time. 6 Damage Requiring Service This product should be serviced by qualified service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 7 No naked flame sources, such as lighted candles, should be placed on this product. 8 Attention should be drawn to the environmental aspects of battery disposal. 9 This product is suitable for use in tropical and/or moderate climates. 10 WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. 11 Do not dispose of batteries in the household trash or fire. B36_012320-A Printed in China 2020 Tech2Go All Rights Reserved.

SDI TECHNOLOGIES INC. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOB36A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, David Stetin 2020-3-14 Rev 11/20/07

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name B36VM Bluetooth Headphones Trademark FCC Model no. iHome EMOB36A SM-B36VM.EXv0, M1- B36VM M2M3M4M5M6M7M8 M9M10

( M1 M10, please refer to model no. table) Model list M1 Part of model #

Number of digit(s) Description M2 M3 M4 M5 M6 M7 M8 M9 M10 2 2 1 1 1 to 2 1 1 to 2 1 2 1 2 digits 2 digits U for E for X for no 0-9 M for AK for alphabets by alphabets a Z for combination brand by a Z

. Or blank Europe version Or blank special character version Or blank Movie version brand Or blank sound chip Or E for for year version Or V0 Sound V9 for chip with speech or year version Or z for direct to i for inner carton required Or consumer on-li ne packagingOr blank English content Or F for English &

French Or 3 for 3 language version sound effect Or Or M for 11 for sound Europe version chip with Music with 11 languages Walmart exclusive AP for Apple exclusive Or KS for Kohls exclusive Or TG for Target exclusive blank SDI Technologies Inc. Confirmed by:

David Stetin 2020-3-14

SDI TECHNOLOGIES INC. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/3/14 SUBJECT: FCC Application for (FCC ID: EMOB36A) To Whom It May Concern:

We, the undersigned, hereby authorize EMTEK (DONGGUAN) CO., LTD. at Sam Lv on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin Date: 2020/3/14