HBH88 Quick Start Guide - Front Size: 540 x 140 mm Printing Color: Black Matl: 100 gsm WF paper Dec 19, 2017 FCC ID: EMOHBH88 IC: 986B-HBH88 HBH88 Sta Quick Start Guide Included HBH88 system Security tether IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warning. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufactures instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specied by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualied personnel. Servicing is required when the apparatus has been damaged in any way. Examples of damage include: Power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING:
To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture. Portable Cart Warning CAUTION:
Use of controls or adjustments or performance of procedures other than those specied may result in hazardous radiation exposure. Set Up This lightning ash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons. Security tether CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance literature accompanying the appliance. instructions
(servicing) the in IMPORTANTES INSTRUCTIONS DE SCURIT 6. Le nettoyage doit s'eectuer uniquement l'aide d'un chion sec. 1. Lisez la prsente notice. 2. Conservez cette notice. 3. Tenez compte des avertissements. 4. Suivez l'ensemble des consignes. 5. N'utilisez jamais cet appareil proximit d'eau. 7. Veillez ne pas obturer les ouvertures permettant la ventilation. Veillez installer le produit conformment aux exigences du fabricant. 8. N'installez pas l'appareil prs de sources de chaleur telles que les radiateurs, les bouches de chaleur, les cuisinires ou autres appareils
(amplicateurs inclus) produisant de la chaleur. 9. Ne rendez pas inecace la prise de mise la terre ou la che polarise servant la scurit. Une che polarise comporte deux broches
; l'une est plus large que l'autre. Une prise de mise la terre comporte deux broches, plus une troisime broche de mise la terre. Cette troisime broche, plus large, est prvue pour la scurit de l'utilisateur. Si l'introduction de cette broche dans votre prise de courant s'avre impossible, contactez un lectricien qui eectuera le remplacement de la prise obsolte. 10. Protgez le cordon d'alimentation lectrique des pitinements ou des tiraillements, en particulier hauteur des prises ou des ches d'alimentation lectriques, et leur sortie des appareils. 11. Utilisez uniquement les accessoires prconiss par le fabricant. 12. Utilisez l'appareil uniquement avec le chariot, le socle, le tripode, le support ou la table prconiss par le fabricant ou vendus avec l'appareil. Si un chariot ou un prsentoir est utilis, exercez la plus grande prudence pour viter toute blessure provoque par un renversement accidentel. 13. Dbranchez l'appareil durant un orage ou lorsque l'appareil ne sera pas utilis pendant de longues priodes. 14. Reportez toute rparation un personnel quali. Les rparations sont exiges lorsque l'appareil a t endommag d'une manire quelconque. Voici des exemples de dommages : le cordon d'alimentation ou la che est endommag(e), du liquide a t dvers ou des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, l'appareil ne fonctionne pas normalement ou a t chapp. portatif de chariot Avertissement 1 Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. outlet AVERTISSEMENT :
POUR VITER LE RISQUE DINCENDIE OU DE CHOCS LECTRIQUES, NE PAS EXPOSER CET APPAREIL LA PLUIE OU LHUMIDIT. ATTENTION :
L'utilisation des commandes ou des ajustements ou l'excution des procdures autres que ceux spciques peut avoir comme consquence l'exposition de rayonnement dangereuse.
* Caution Marking was located at bottom enclosure of the apparatus Les marquages sont inscrits en bas de lappareil. ATTENTION AVERTISSEMENT - POUR RDUIRE LE RISQUE DE CHOC LECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU L'ARRIRE) AUCUN USER-SERVICING AU PERSONNEL DE SERVICE QUALIFI. Ce symbole clair avec une pointe de che dans un triangle quilatral est pour indiquer l'utilisateur la prsence d'une tension dangereuse non-isole dans le botier du produit qui pourrait crer un risque de choc lectrique aux personnes. Le point d'exclamation dans un triangle quilatral est pour alerter l'utilisateur la prsence d'instructions importantes d'utilisation et d'entretien dans la documentation accompagnant l'appareil. 2 Connect AC plug to a working outlet that is not controlled by an On/O switch. 3 Set the Volume Limiter Switch on the bottom of the unit (High for large rooms, Low for smaller rooms). volume limit hi lo Setting the Time Zone and Clock
(Factory Preset Clock) The rst time you connect your new preset clock to the AC outlet, the unit will automatically show the correct Eastern Standard time, which is the default setting. If you are not in the Eastern time zone, you must change the default setting to match your time zone (see Time Zone Setting below). Once the correct time zone is set, if the time displayed is not correct, follow steps under Manual Clock Setting to set the correct time, year and date. Time Zone Setting Make sure unit is in Power OFF mode. Press and hold the Time Zone Button on the back of the unit for 2 seconds. The time zone will ash. time zone 2 SECS Press the or button to cycle to local time zone. Press Time Zone Button again to conrm. Daylight Saving Time The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. If Daylight Saving Time is NOT observed in your loca-
tion, move the DST switch from AUTO to -1 or +1 BEFORE setting time. dst
-1 +1 auto Bluetooth Pairing 1. Press and hold the Bluetooth Button. Unit will enter pairing mode. 2. Select HBH88 on your devices Bluetooth menu. HBH88 Quick Start Guide - Inside Size: 540 x 140 mm Printing Color: Black Matl: 100 gsm WF paper Manual Clock Setting Press and hold the Time Set Buttonfor 2 seconds to enter clock setting mode. Press the Time Set Button to conrm the year. The date will ash. time set 2 SECS time set Press the or button to set the time. Make sure to set the correct AM/PM hour (indicator to left of time). Press the or button to set the date. Hold for rapid adjustment. Press the Time Set Button to conrm the time. The year will ash. time set Press the Time Set Button to conrm the date and exit clock setting. time set Press the or button to set the year. TIP: Press the Alarm Set Button when display is ashing during clock setting to toggle between 12 hour and 24 hour display modes. Backup Batteries Keep unit connected to AC power when replacing batteries or you will lose settings. When Low Battery Icon appears on display, replace backup batteries with 2 fresh AA batteries. Make sure polarity (+/) markings match illustration. Reset Button The total ouput current of both courtesy plugs (one on each side of the unit) is 10 amps 1250 watts. If a guest connects a device that overloads the outlet(s), the built in circuit breaker will prevent damage to the unit. The Reset Button on the back of the unit will pop out to indicate the outlet was overloaded. Press and release the Reset Button to reset the circuit breaker and restore the courtesy plug to operation. reset Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. HBH88QSG-103116-A 2017 HTI Industries, LLC. All rights reserved Printed in China The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on apparatus. L'appareil ne doit pas tre expos aux coulements ou aux claboussures et aucun objet ne contenant de liquide, tel qu'un vase, ne doit tre plac sur l'objet. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur est utilis pour dconnecter le systme. La prise du secteur ne doit pas tre obstrue ou doit tre facilement accessible pendant son utilisation. Pour tre compltement dconnect de l'alimentation d'entre, la prise doit tre dbranche du secteur. Battery shall not be exposed to excessive heat such as sunshine, re or the like. Les piles ne doivent pas tre exposes de forte chaleur, tel qu' la lumire du soleil, au feu ou autres choses de semblable. An appliance with a protective earth terminal should be connected to a mains outlet with a protective earth connection Un appareil avec la borne de terre de protection doit tre connect au secteur avec la connexion de terre de protection. Minimum distances 10 cm around the apparatus for sucient ventilations. 10cm de distance minimale autour de lappareil pour une ventilation susante. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. Ne pas recouvrir les entres darations avec des objets tel quun journal, une nappe, un rideau, etc No naked ame sources such as lighted candles should be placed on the apparatus. Aucune source de amme nue, tel quune bougie, ne doit tre place sur lappareil. Attention should be drawn to the environmental aspects of battery disposal. Les piles usages doivent tre jetes en respectant lenvironnement. Apparatus should only be used in moderate climates. EI aparato debe usarse en climas moderados. HBH88 Service Number: HBH88-A-A FCC ID: EMOHBH88 IC: 986B-HBH88 Clock Backup: DC 3V, AA x 2 Power Source: AC~125V 60Hz, 1300W AC Outlet: AC~125V 60Hz, 10A Total USB: DC 5V 2.4A x 2 Serviced by Hotel Technologies Inc. Toll Free: 1-888-744-6835 www.hoteltech.com Made in China Patents: www.ihome.com/patents CONFORMS TO UL STD. 60065 CERTIFIED TO CSA STD. C22.2 No.60065 4008427 Model plate Plaque modle Bottom of unit Bas de l'unit Generic Legal Sheet for all Hotel model items - Front Size: 108 x 140 mm Color: 1C + 1C (Black) Material: 100 gsm WF paper JAN 18 , 2018 Generic Legal Sheet for all Hotel model items - Back IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat. or as marked on the appliance. 4. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions 5. Power-Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. openings or vents located on the product. 7. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any 8. Attachments Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing The user should not attempt to service the unit beyond those methods described in the users operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC Information equipment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Increase the separation between the equipment and receiver. Questions? visit www.hoteltech.com or call 1-888-744-6835 Toll Free LIMITED 30 DAY WARRANTY
(valid in contiguous U.S.A. only: not valid in Hawaii or Alaska) Hotel Technologies, a division of HTI Industries LLC, (hereafter referred to as Hotel Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 30 days from the date of receipt of the item. Should service be required by reason of any defect or malfunction during the warranty period, Hotel Technologies will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required:
1. Fax a representative at 915.633.1388 with a Return Authorization request including proof of purchase date (i.e., invoice number and date from distributor or HTI) to receive a Return Authorization Number. Issuance of Return Authorization Number is subject to review prior to granting. NO ITEM CAN BE ACCEPTED WITHOUT A RETURN AUTHORIZATION NUMBER. 2. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 3. Send the unit by method agreed to with your representative to the Factory Service Center listed below:
Consumer Repair Department Hotel Technologies Inc. 1330 Goodyear Drive El Paso TX 79936-6420 NOTE: Improperly packed items or Items received without an RA # cannot receive credit. NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 30 days, and Hotel Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If you did not purchase this product directly from Hotel Technologies, please contact the appropriate distributor for their warranty terms IC Statement for RF Device This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. Legal Sheet w/ic-110317-C 2017 HTI Industries, LLC. All rights reserved Printed in China