FCC ID: EMOIBT700A Bluetooth Mono Wireless Speaker

iBT700 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 W x 150 H mm Material: 85gsm wood free paper April 21, 2020.

* Front PLAYPRO Portable Bluetooth Speaker VOLUME UP MICRO USB CHARGING PORT BLUETOOTH PAIRING

- Press & Hold until the LED ashes blue to enter pairing mode

- Select iHome iBT700 on your device to connect usb in usb in reset reset CHARGING LED PLAY/PAUSE/

SPEAKERPHONE

- Press to Play/Pause

- Press to Talk/ress & hold for end call /reject call.

- Press & Hold for Google/Siri BLUETOOTH PAIRING LED RESET BUTTON Use the extended tip of a paper clip or other thin tool to push in the reset button Model: iBT700 EQ MODE Press to select the best EQ mode for your environment

(indoor or outdoor) VOLUME DOWN POWER ON/OFF

- Press to turn ON/OFF

- Press & Hold to check battery status (when unit is ON) CHARGING THE SPEAKER USB charging cable (included) USB AC adaptor

(not included) usb in reset CHARGE UNIT BEFORE USE ABOUT 4 HOURS LED STATUS INDICATORS SPLASHPROOF COVER Before using near water, make sure the splashproof cover is completely ush with the unit. Press along the entire edge of the cover until it is securely in place. Blue LED = Bluetooth Status Red LED = Battery Status BATTERY STATUS RED OFF RED charging (slow blink) fully charged low battery (fast ash) BLUETOOTH STATUS BLUE BLUE pairing (ashing) connected to Bluetooth iBT700 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 W x 150 H mm Material: 85gsm wood free paper

* Back For questions, full instructions, warranty, and additional safety information, please scan the QR code or visit:

www.ihome.com/help/ibt700 Increase the separation between the equipment and receiver. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut CAN ICES-3 (B) / NMB-3(B) annuler l'autorit de l'utilisateur utiliser l'quipement. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:

Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 2. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 3. Only use attachments/accessories specied by the manufacturer. 4 . Unplug this product during lightning storms or when unused for long periods of time. 5. Damage Requiring Service This product should be serviced by qualied service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 6. No naked ame sources, such as lighted candles, should be placed on this product. 7. Attention should be drawn to the environmental aspects of battery disposal. 8. This product is suitable for use in tropical and/or moderate climates. 9. Do not dispose of batteries in the household trash or re. 10. If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage. 11. Always use a UL/ETL certied charging adapter (not included), and the supplied USB charging cable. iBT700IS-041520-A Printed in China 2020 SDI Technologies, Inc. All rights reserved

GAW Title: Bluetooth Portable Speaker Version: 6 Model #: iBT700 Designer: Mitchell Bailey Date: 03.04.2020 CONFIDENTIAL and PROPRIETARY:

The information contained herein including, but not limited to the products, renderings, concepts and designs comprise intellectual property of SDI Technologies Inc. and shall be kept condential and shall not be used or disclosed by the recipient without the written authority of SDI Technologies Inc. 2020 2021 2022 2023 2024 PROPERTY OF SDI TECHNOLOGIES PROPERTY OF SDI TECHNOLOGIES iBT700 iBT700 2020 2021 2022 2023 2024 IP65 HVIN:iBT700a XXXXXX Text in PMS Cool gray 6 Date Code location size: 10Pt Updated Icon 02.25.2020 Pairing LED Blue All Graphics in RED are DEBOSSED with glossy finish. debossed: 0.3mm All Graphics in PURPLE are EMBOSSED and PAD PRINTED see DL. embossed: 0.3mm iHome Logo see DL usb in reset Charging Red LED

SDI TECHNOLOGIES INC. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOIBT700A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, David Stetin 2020-05-21 Rev 11/20/07

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name Trademark FCC Model no. Bluetooth Mono Wireless Speaker iHome MOIBT700A iBT700, iBT700B, iBT700L, iBT700Q, iBT700R, iBT700BG, iBT700X (X would be 1 or 2 alphabet(s) combination denote different cabinet color) Confirmed by:

David Stetin 2020-05-21

SDI TECHNOLOGIES INC. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-05-21 SUBJECT: FCC Application for (FCC ID: EMOIBT700A) To Whom It May Concern:

We, the undersigned, hereby authorize EMTEK (DONGGUAN) CO., LTD. at Sam Lvon our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin Date: 2020-05-21 E:\ED200103042E ES200103045 KID iBT780 FCC ID\work\POA_Letter_140225.docx