iBT70OO - Instruction Sheet - English Color: Black text on white paper (IC + 1C) * Front * Back Size: 102 W x 150 H mm Material: 85gsm wood free paper June 27 2023 - v13 iHome PLAYPRO Model: iBT700 Bluetooth Mono Wireless Speaker EQ MODE Press to select For questions, full instructions, warranty, and additional safety information, please scan the QR code or visit:
www.ihome.com/help/ibt700 INTERNAL RECHARGEABLE LITHIUM-ION BATTERY This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. WARNING/DISPOSAL OF UNIT the best EQ mode VOLUME BLUETOOTH PAIRING USB-C De Nor arom to change the batcary Doing so will void the warranty and could cause injury and damage to your device. To dispose for your environment UP - Press & Hold until the LED CHARGING * Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. indoor or outdoor) PORT
* Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
* Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com GENERAL BATTERY PRECAUTIONS
+ Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. ite! disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances.
+ Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit).
* Never expose a battery to any liquid.
* Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.
* Always keep batteries out of the reach of infants and small children. flashes blue to enter pairing mode
- Select iHome iBT700 on your device to connect VOLUME DOWN A PLAY/PAUSE/
CHARGING LED POWER SPEAKERPHONE IMPORTANT SAFETY INSTRUCTIONS
-P to Play/P. Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. ON/OFF ress to Play/Pause 1. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage
- Press to Talk/press & hold for end call /reject call. RESET BUTTON
- Press & Hold for Google/Siri Use the extended tip of a paper clip or other thin tool to push in the reset button the surface of the unit. 2. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 3. Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer, 6
- Press to turn ON/OFF
- Press & Hold to check battery status (when unit is ON)
. Unplug this product during lightning storms or when unused for long periods of time.
"BLUETOOTH PAIRING LED . Damage Requiring Service - This product should be serviced by qualified service personnel when:
i i i
i i i
i i i
i i
i
1 - Plug has been damaged.
' - Objects have fallen into or liquid has been spilled into the enclosure. i - The unit has been exposed to rain. The unit has been dropped or the enclosure damaged. i - The unit exhibits a marked change in performance or does not operate normally. 1 7. No naked flame sources, such as lighted candles, should be placed on this product. 1 8. Attention should be drawn to the environmental aspects of battery disposal.
' 9. This product is suitable for use in tropical and/or moderate climates. 1 [ARNING:
i
i
i i
i i
i i 1
i i i
i
i i
USB AC adaptor
(not included) USB-C charging cable (included)
- Do not dispose of batteries in the household trash or fire.
- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
- If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.
- Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
* Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. i Hole bs equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the ules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet quipement est conforme aux limites dexposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Lappareil est conforme aux exigences dexposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur I'exposition aux RF et la conformit. Tout changement ou modification non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur a utiliser I'6quipement. CAN ICES-3(B) / NMB-3(B) CHARGE UNIT BEFORE USE ABOUT 4 HOURS SPLASHPROOF COVER Before using near water, make sure the splashproof cover is completely flush with the unit. Press along the entire edge LED STATUS INDICATORS of the cover until it is securely in place. G TRUE WIRELESS PAIRING (TWS)
(REQUIRES 2 SPEAKERS) 1) Pair one iBT700 unit to your device via Bluetooth. 2) Power on the second iBT700 unit.
) 3) Press and hold the Vol + and Play Button for 2 seconds on each unit (unit would have a prompt tone). BLUETOOTH STATUS 4) ba both units are linked, will announce Left Channel, ight Channel respectively. 5) Both units will link TWS automatically next time both units are powered on within 20 sec. 6) To remove TrueWireless pairing, press & hold Bluetooth Pairing button for 10 seconds. Blue LED = Bluetooth Status Red LED = Battery Status oo BATTERY STATUS charging (slow blink) fully charged low battery (fast flash) pairing (flashing) connected to Bluetooth 2023 SDI Technologies, Inc. All rights reserved iBT7001S-062723-C Printed in China