FCC ID: EMOIBT800A Bluetooth Portable LED Color Changing Speaker

iBT800 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 W x 150 H mm Material: 85gsm wood free paper Nov 25, 2021 Model: iBT800 CONTROLS OVERVIEW (BOTTOM OF UNIT) POWER ON/OFF Press and hold to turn speaker ON Press to turn speaker OFF COLOR MODES/

BATTERY STATUS

- Press repeatedly to cycle through color modes

- Press and hold to check battery level status PLAYGLOW MINI Waterproof Portable Speaker BLUETOOTH PAIRING

- Press & hold to enter pairing mode

- Select iHome iBT800 on your BT device to connect RESET BUTTON If necessary, insert the tip of a paper clip or other thin tool to reset the unit FRONT OF UNIT TOP OF UNIT - LED INDICATORS PLAY/PAUSE Red LED = Battery Status Blue LED = Bluetooth Status BATTERY STATUS INDICATOR BLUETOOTH STATUS INDICATOR RED OFF RED charging (slow ash) fully charged low battery (fast ash) BLUE BLUE pairing (fast ash) connected to Bluetooth CHARGING THE SPEAKER USB charging cable (included) USB CHARGING PORT USB AC adaptor

(not included) CHARGE UNIT BEFORE USE ABOUT 2 HOURS For product support, please scan the QR code or visit:

www.ihome.com/help/ibt800 FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Increase the separation between the equipment and receiver. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3 (B) / NMB-3(B) WARNING/DISPOSAL OF UNIT Do NOT attempt to change the built-in battery. Doing so will void the warranty and could cause personal injury and damage to your device. To dispose of the unit, follow the instructions below:

Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge. To nd a drop-off location near you, visit www.call2recycle.com GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove the battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use or store a lithium device in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. Always charge Lithium devices on surfaces that wont catch on re such as cement, steel, ceramic or stone. Wooden tables and carpeted oors are not recommended charging surfaces. Do not charge batteries near ammable products or liquids. Never leave a charging lithium device unattended. If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1 Do not use this product near water, and clean only with dry cloth. 2 Do not block any ventilation openings. 3 Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances

(including ampliers) that produce heat. 4 Only use attachments/accessories specied by the manufacturer. 5 Unplug this product during lightning storms or when unused for long periods of time. 6 Damage Requiring Service This product should be serviced by qualied service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 7 No naked ame sources, such as lighted candles, should be placed on this product. 8 Attention should be drawn to the environmental aspects of battery disposal. 9 This product is suitable for use in tropical and/or moderate climates. 10 WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or moisture. 11 Do not dispose of batteries in the household trash or re. 12 Always use a UL/ETL certied charging adapter (not included), and the supplied USB charging cable. 2022 SDI Technologies, Inc. All rights reserved iBT800_IS_112521-A Printed in China

Title: Portable Color Changing Version: 9 Model # iBT800 BLUE - Deboss .3mm - See DL for color information GREEN - Silkscreen - See DL for color information Designer: Nick Silvestri Date: 11.29.2021 CONFIDENTIAL and PROPRIETARY:

The information contained herein including, but not limited to the products, renderings, concepts and designs comprise intellectual property of SDI Technologies Inc. and shall be kept confidential and shall not be used or disclosed by the recipient without the written authority of SDI Technologies Inc. Charging LED + Bluetooth LEDs behind speaker grille Heavy-Matte Texture/No-gloss YS-1288A 11/01/21 Silkscreen Printed on inner diffuser 11.01.2021 14mm Fine Texture YS-1282B 11/01/21 f {7 |

Heavy-Matte Texture/No-gloss YS-1288A 11/01/21 perce Sy on Cool grey 10C background: Black Nov 30, 2021 Nov 29, 2021 Nov 30, 2021 HVIN:IBTB0Qa Service #iBT8OO-A-A Charging Voltage:DC SV, 1A=FCCID: EMOIBTBOOA IC: 98688T800A

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOIBT800A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual External Photos Internal photos Setup photo Exhibit Type Manual External Photos Internal photos Setup photo Sincerely, David Stetin 2021-12-24 Rev 11/20/07

Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name FCC ID Model no. Bluetooth Portable LED Color Changing Speaker EMOIBT800A iBT800, iBT800B, iBT800X (X could be single or multiple digits by any alphabets denote different cabinet color) Confirmed by:

David Stetin 2021-12-24

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-12-24 SUBJECT: FCC Application for (FCC ID: EMOIBT800A) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin 2021-12-24