FCC ID: EMOIBT300A Bluetooth Wireless Speaker with Rechargeable Battery

iBT300

Instruction Sheet - English (+ Try me)

Color: Black text on white paper (1C + 1C)

Size: 102 W x 150 H mm

Material: 85gsm wood free paper

Feb 24, 2021

Model: iBT300

PLAYTOUGH X

Water Resistant Portable Speaker

POWER

Press to turn

ON/OFF

BLUETOOTH PAIRING

- Press & hold to enter

Bluetooth pairing mode

- Select ‘iHome iBT300’ on

your device to connect

PLAY/PAUSE

SPEAKERPHONE

- Press to answer a call

- Press & hold to end/reject a call

BLUETOOTH PAIRING/

LOW BATTERY

INDICATOR

CHARGING

INDICATOR

CHARGING THE SPEAKER

USB

CHARGING

PORT

USB AC

adaptor

(not included)

USB charging

cable (included)

CHARGE UNIT

BEFORE USE

ABOUT 2 HOURS

LED STATUS INDICATORS

BATTERY CHARGING STATUS

RED

OFF

charging*

fully charged*

WATER RESISTANT COVER

Before using near water, make sure the

water resistant cover is completely flush

with the unit. Press along the entire edge

*Charging indicator located on back of unit

of the cover until it is securely in place.

BLUETOOTH /LOW BATTERY STATUS

BLUE

BLUE

pairing (flashing)

connected to Bluetooth

RED/BLUE

low battery (fast flash)

*Two indicators located on front of unit

*FRONT

*BACK

For questions, warranty, and additional safety information, please

scan the QR code or visit:

www.ihome.com/help/ibt300

INTERNAL RECHARGEABLE LITHIUM-ION BATTERY

This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your

battery may be dead, try charging it for an extended period of time and try resetting the unit.

WARNING/DISPOSAL OF UNIT

Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of

the unit, follow the instructions below:

• Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances.

• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.

• Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you,

visit www.call2recycle.com

substances.

GENERAL BATTERY PRECAUTIONS

• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.

• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic

• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).

• Never expose a battery to any liquid.

• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where

excessive internal temperatures may be encountered.

• Always keep batteries out of the reach of infants and small children.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

1. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the

2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

3. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including

surface of the unit.

amplifiers) that produce heat.

4. Only use attachments/accessories specified by the manufacturer.

5. Unplug this product during lightning storms or when unused for long periods of time.

6. Damage Requiring Service – This product should be serviced by qualified service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally.

7. No naked flame sources, such as lighted candles, should be placed on this product.

8. Attention should be drawn to the environmental aspects of battery disposal.

9. This product is suitable for use in tropical and/or moderate climates.

WARNING:

- Do not dispose of batteries in the household trash or fire.

- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

-

- Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s

If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.

authority to operate the equipment.

Increase the separation between the equipment and receiver.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

•

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ISED Information

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition

aux RF et la conformité.

Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de

l'utilisateur à utiliser l'équipement.

CAN ICES-3(B) / NMB-3(B)

iBT300IS-022421-A

Printed in China

© 2021 SDI Technologies, Inc.

All rights reserved

Model #: iBT300 HVIN: iBT300a Service #: iBT300-A-A Charging Voltage: DC 5V, 1A Designed and Engineered in the USA Mfd. & Srvcd. by SDI Technologies, Inc. FCC ID: EMOIBT300A IC: 986B-IBT300A IP46 Patents: www.ihome.com/patents Made in China www.iHome.com This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B) / NMB-3(B) Cool grey 6C

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EMOIBT300A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, David Stetin 2021-03-05 Rev 11/20/07

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name Trademark FCC Model no. Bluetooth Wireless Speaker with Rechargeable Battery iHome EMOIBT300A iBT300, iBT300BG, iBT300BGC, iBT300X

(X could be single or multiple digits by any alphabets denote different cabinet color) Confirmed by:

David Stetin 2021-03-05

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-03-05 SUBJECT: FCC Application for (FCC ID: EMOIBT300A) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin 2021-03-05