FCC ID: EMOIOP18A Compact Bedside Alarm Clock with Wireless Charging and USB Charging

iOP18 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 x 150 mm Material: 85 gsm wood free paper Aug. 10, 2021 Model: iOP18 TIME SET

- Press & Hold to Set Clock

- Use +/- to select 12/24 hour display and press Time Set to confirm

- Use +/- to set hour and press Time Set to confirm

- Use +/- to set minute and press Time Set to confirm

- Continue steps to set year, month, and date, and press Time Set to confirm clock settings SET

- Press to increase/decrease time & settings QI Charge Status Indicator Time Set Indicator PM Indicator

*Before use, remove battery pull tab from bottom panel. CAUTION - RISK OF EXPLOSION IF IS REPLACED BY AN BATTERY INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The socket-outlet shall be installed near the equipment and shall be easily accessible. Wireless Charging Area DISPLAY ICONS Alarm Clock 2-in-1 Wireless Charger ALARM SET

- Press & Hold to Set Alarm

- Use +/- to select hour and press Alarm Set to confirm

- Use +/- to select minute and press Alarm Set to confirm

- Use +/- to select schedule (7 days, weekdays, or weekends only) and press Alarm Set to confirm

- Press and release to arm/disarm alarm

- When alarm is sounding, press Alarm Set to disarm and reset for the next day SNOOZE

- Press to Snooze Alarm

- Press & Hold to Adjust Snooze Duration

(adjust with +/- and press Snooze to confirm)

- Press to Adjust Display Brightness

(cycle through Hi, Med, Low, and OFF) Alarm Indicator Low Backup Battery Indicator

(when icon appears, install 2 new AAA batteries on bottom panel) Battery Backup Compartment*

(for clock accuracy)

- Press on the battery compartment door and slide to release it.

- Insert 2 fresh AAA batteries in the backup battery compartment. Make sure polarity (+/) matches.

- Close the battery compartment door. REAR CONTROLS Connect AC adapter to DC Jack, and plug into outlet. DC Jack 5V/3A DC 5V 3A 5W USB USB Charging Port WIRELESS CHARGING Supports:

Qi compatible phones (also works with plastic cases up to 3mm thick) AirPods with wireless charging case Place Qi compatible device face up on the charging rest. Charging status will be indicated on display:

Rapid blinking icon:

Device is not charging or metal object detected (reposition device or remove metal object) Slow blinking icon:

Device is charging Solid icon:

Device is fully charged Note: Icon may continue to blink slowly when iOS devices are fully charged. CAUTION: Remove phones metal protective case before charging. Do not place magnetic or metal objects on charger during charging. Qi compatible phones with metallic looking finishes will charge normally. FCC Information This equipment should be installed and operated with minimum distance 20cm (8in) between the radiator & your body This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part the users authority to operate the equipment. 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler le droit de l'utilisateur utiliser l'quipement. CAN ICES-3 (B) / NMB-3(B), CAN RSS-216 / CNR-216 IMPORTANT SAFETY INSTRUCTIONS Please heed all warning, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. 2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 5. Only use attachments/accessories specified by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service This product should be serviced by qualified service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain.

- The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 8. No naked flame sources, such as lighted candles, should be placed on this product. 9. Attention should be drawn to the environmental aspects of battery disposal. 10. This product is suitable for use in tropical and/or moderate climates. WARNING:

- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

- Do not dispose of batteries in the household trash or fire. iOP18_IS_081321-A 2021 SDI Technologies, Inc. All rights reserved Printed in China

Model: iOP18 WIRELESS CHARGER Supports WPC 5W Do not place metal phone cases or metal objects in the wireless charging area. Service #: iOP18-A-A FCC ID: EMOIOP18A IC: 986B-IOP18A Clock Backup: DC 3V, 2 x AAA USB Output: DC 5V, 1A HVIN: iOP18a AC Adaptor: DC 5V, 3A DC 1.5V (R03) UM-4, AAA SIZE DC 1.5V (R03) UM-4, AAA SIZE DC 5V 3A 5W USB Flat View of Display Area Flat View of Button Area Debossed, 0.2mm, high gloss nish POP Label ref. iBTW281 label material & color C - 63 M - 0 Y - 0 K - 0 Battery cover Model: iOP18 WIRELESS CHARGER Supports WPC 5W Do not place metal phone cases or metal objects in the wireless charging area. Service #: iOP18-A-A FCC ID: EMOIOP18A IC: 986B-IOP18A Clock Backup: DC 3V, 2 x AAA USB Output: DC 5V, 1A HVIN: iOP18a AC Adaptor: DC 5V, 3A Model Plate for iOP18W

- PMS Cool Grey 3 Cut Sheet

- PMS Cool Grey 9 printing PINK - silkscreen

*FOLLOW /DL COLOR SPECIFIED PRINT FOR ALL PRINTED ICONS ON PRODUCT. BLUE - Debossed (see DL for depth) GREEN - Lasercut and backlit ORANGE - Emboss 0.3mm LED Display - 80mm x 21.5mm Same segment layout as iBTW22 Title: Alarm Clock w/ Wireless Charging and USB Charging GAW Version: v5 Model #: iOP18 Designer: Eric Holzer Date: 06.04.2021

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:EMOIOP18A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, David Stetin Rev 11/20/07

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production name Trademark FCC Model no. Compact Bedside Alarm Clock with Wireless Charging and USB Charging iHome EMOIOP18A iOP18, iOP18B, iOP18X(X could be single or multiple digits by any alphabets denote different cabinet color) Confirmed by:

David Stetin

SDI Technologies Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-07-06 SUBJECT: FCC Application for (FCC ID: EMOIOP18A) To Whom It May Concern:

We, the undersigned, hereby authorize EMTEK (DONGGUAN) CO., LTD. at Sam Lv on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, David Stetin W:\\\\ED191107034E KID iBT235 FCC ID Report\work\POA_Letter_140225.docx