FCC ID: EMOIWBTW200A Compact Bluetooth Bedside Alarm Clock with Upright Wireless, Integrated Apple Watch Charging, and USB Charging

iWBTW200 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 W x 150 H mm Material: 85gsm wood free paper Feb 13, 2020 TIMEBASE PRO+

Model: iWBTW200 Bluetooth Speaker + Triple Charging WIRELESS CHARGING REST APPLE WATCH CHARGER ZZZ (SNOOZE/DIMMER)

- Press to Adjust Display Brightness Levels

- Press to Snooze when alarm is sounding

- Press & Hold to Adjust Snooze Duration

(adjust with +/- and press ZZZ to conrm) POWER

- Press to Turn ON/OFF

- Press to stop sounding alarm/

reset for the next day PLAY/PAUSE

- Press to Play/Pause audio or answer calls

- Press & Hold to end/

ignore calls

- Press & Hold to activate Google/Siri on paired device PM Indicator Wireless Charging Status LED Low Backup Battery Indicator Alarm Indicator TIME SET

- To set clock, press & hold until display starts to ash

(adjust with +/- and press time to conrm)

- Repeat for year, month, and date ALARM SET

- Press to Preview

- Press Again to Arm/Disarm

- To set alarm, press & hold until display starts to ash

(adjust with +/- and press alarm to conrm) PLUS | MINUS

- Press + to increase volume/adjust settings

- Press - to decrease volume/adjust settings Battery Backup Compartment

(for clock accuracy in the event of power failure)

*Before use, remove battery pull tab from bottom panel. REAR CONTROLS Connect AC adapter to DC Jack, and plug into outlet. DC Jack for power supply

(12V/2.7A) usb charging DST Switch

(Daylight Savings)

-1 +1 Auto USB Charging

(5V/1A) Bluetooth Pairing Button/LED

- Press & Hold to enter pairing mode

- Select iHome iWBTW200 on your device to connect WIRELESS CHARGING Supports:

Qi compatible phones (also works with plastic cases up to 3mm thick*) Place Qi compatible device facing forward on the charging rest. Charging status will be indicated on the LED located under the iHome badge:

Rapid blinking LED: Device is not charging (reposition device) Slow blinking LED: Device is charging Solid LED: Device is fully charged Note: Qi status LED may continue to blink slowly (indicating charging) for iOS devices that are fully charged. CAUTION: Not all cases are wireless charging compatible. Remove phones metal protective case before charging. Do not place magnetic or metal objects on charger during charging. For questions, full instructions, warranty, and additional safety information, please scan the QR code or visit:

www.ihome.com/help/iwbtw200 FCC Information This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. CAN ICES-3 (B) / NMB-3(B), CAN RSS-216 / CNR-216 IC Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. WARNING Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The socket-outlet shall be installed near the equipment and shall be easily accessible. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1 Do not use this product near water, and clean only with dry cloth. 2 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 3 Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 4 Only use attachments/accessories specied by the manufacturer. 5 Unplug this product during lightning storms or when unused for long periods of time. 6 Damage Requiring Service This product should be serviced by qualied service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 7 No naked ame sources, such as lighted candles, should be placed on this product. 8 Attention should be drawn to the environmental aspects of battery disposal. 9 This product is suitable for use in tropical and/or moderate climates. 10 WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or moisture. 11 Do not dispose of batteries in the household trash or re. 2020 SDI Technologies, Inc. All rights reserved

* Some larger size phone cases may not be able to charge. (Please remove case to charge phone properly.) iWBTW200_IS_021320-A Printed in China

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200615K16-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

SDI Technologies Inc. ADD: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Product Similarity Declaration 2020-06-24

(Model number:

and USB Charging To Whom It May Concern, We, SDI Technologies Inc., hereby declare that we have a product named as Compact Bluetooth Bedside Alarm Clock with Upright Wireless, Integrated Apple Watch Charging, ID:

EMOIWBTW200A) was tested by BACL, meanwhile, for our marketing purpose, we would like to list series models (iWBTW200B, iWBTW200BC, iWBTW200XX (XX would be any 2-3 digits alphabet combination denote different color of cabinet)) on reports and certificate, all the models are electrically identical. The only difference is the color and model number. No other changes are made to them. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, iWBTW200)

(FCC Signature:

David Stetin Compliance Officer

SDI Technologies Inc. ADD: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com FCC Authorization Date: 2020-06-24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, SDI Technologies Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. 21 U.S.C. 862. Sincerely Yours, Signature:

David Stetin Compliance Officer QA-FR-170-B 7/29/2014

FCC Confidential Authorization SDI Technologies Inc. ADD: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: dstetin@sditech.com Date: 2020-06-24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EMOIWBTW200A In accordance with Sections 0.457 and 0.459 of the Commissions Rules, SDI Technologies Inc. , hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

David Stetin Compliance Officer

SDI Technologies Inc. Address: 1299 Main St. Rahway, NJ 07065, United States Email: dstetin@sditech.com Tel: 732 574 9000 Fax: 735 574 2634 Date: 2020/06/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

The RF chip, model ATS2819S, which installed in our product Compact Bluetooth Bedside Alarm Clock with Upright Wireless, Integrated Apple Watch Charging, and USB Charging, Model: iWBTW200, FCC ID: EMOIWBTW200A, supports BDR (GFSK), EDR (/4-

DQPSK, 8DPSK), and BLE functions. For use in America and this chip will not support/enable BLE. The BLE function has been shielded by the manufacturer using the software. Sincerely Yours, Signature:

David Stetin Compliance Officer