FCC ID: EMOICVBT22B Flat Panel Vanity Mirror with Bluetooth Mono Speaker

iCVBT22W.EXv23 Vanity Mirror - Quick Start Guide (English) Size: 153 x 140 mm (folded) Color: 3C + 2C (PMS Cool Gray 9C & PMS 2705U, Cyan) Material: 120 gsm wood free paper Date: Mar 14, 2023 PMS Cool Gray 9C PMS uncoated 2705 U iHome Beauty REF L ECT iCVBT22W.E Xv23 Quick Start Guide Connecting Mirror to Power

Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet outlet USB DC 9V 2A Light Function Press light button to turn ON Hi/Lo/OFF for the best light brightness You look Amazing!

Audio Function Press power button to turn speaker On or Off When mirror is On, press and hold for pairing mode, indicated by the blinking BLUE LED Select iHome REFLECT on your devices Bluetooth menu to connect Press to play / pause Bluetooth audio Press to answer Bluetooth calls Press and hold for 2 seconds to decline/end Bluetooth calls Quick double press for next track Quick triple press for previous track Press and hold for 2 seconds and wait for beep to activate voice control with Siri / Google Assistant Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri/Google Assistant to play music and more. Press to lower or raise volume Charging Devices

Mirror MUST be connected to AC adapter to enable USB charging from the unit. Connect USB cable (not included) to USB charging port on back of mirror and connect the other end to your device. USB DC 5V 1A Detail Mirror Attach included 10x magnifying detail mirror wherever you like on the mirror face (or anywhere!) The back of the detail mirror has SimpleStick micro suction material for easily attaching and detaching almost anywhere. If necessary, clean SimpleStick material with office tape. Maintenance This mirror comes with a cleaning cloth to keep the large surface and detail mirror smudge free. Wash the mirrors with mild soap and water when needed. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. 2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 5. Only use attachments/accessories specied by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service This product should be serviced by qualied service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally. 8. No naked ame sources, such as lighted candles, should be placed on this product. 9. This product is suitable for use in tropical and/or moderate climates. WARNING:

- To reduce the risk of re or electric shock, do not expose this product to rain or moisture.

- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

- Sunlight: Never place the mirror in or expose the mirror to direct sunlight. The suns rays can reect to become focused and cause excessive heat and/or re. Do not use mirror in direct sunlight as reected sunlight could injure eyes FCC INFORMATION This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Increase the separation between the equipment and receiver. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3(B) / NMB-3(B) For warranty and full instructions visit: www.ihome.com/support 2023 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com Siri is a trademark of Apple, Inc. in the United States and other countries. Google Assistant is a trademark of Google, Inc. iCVBT22-031423-D Printed in China

v1 iCVBT22 Mitchell Bailey 03.15.2023 RED - Silk Screen Graphic iHome logo and buttons See DL for color TOP LED FRONT USB GREEN - Embossed 0.3mm BACK FCC Info - Embossed 0.3mm Mar 15, 2023 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) May 15, 2023 iCVBT22W.EXv23AK PVC cut sheet color: refer to DL Model:

USB Output:

Service Number:

AC Adaptor:

iHome Beauty REFLECT iCVBT22W.EXv23 DC 5V, 1A iCVBT22-A-B DC 9V, 2A Manufactured and Serviced by SDI Technologies Inc. Designed in the USA Patents: www.ihome.com/patents HVIN: iCVBT22b FCC ID: EMOICVBT22B IC: 986B-ICVBT22B Made in China www.ihome.com White background Cool grey 6C iCVBT22 GAW 03.15.2023 | v1 BOTTOM

2023.05.29 SDI Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, David Stetin

SDI Technologies Inc. 2023.05.29 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: EMOICVBT22B SDI Technologies Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, David Stetin SDI Technologies Inc. 2023.05.29 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: EMOICVBT22B SDI Technologies Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, David Stetin

2023.05.29 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR

Product Name Flat Panel Vanity Mirror with Bluetooth Mono Speaker iCVBT22, iCVBT22W, iCVBT22X (X could be single or multiple digits by any alphabets and punctuation marks denoting different year version, buyers and cabinet colors) Model Number FCC ID applicant Address EMOICVBT22B

: SDI Technologies Inc.

: 1299, Main Street, Rahway, NJ 07065, U.S.A.

) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram, Schematics, Operational Description) required to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST (The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors.) Please contact me if there is any information you may need. Sincerely, David Stetin

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component. Only different on model number. Production name Flat Panel Vanity Mirror with Bluetooth Mono Speaker Trademark iHome FCC Model no. EMOICVBT22B iCVBT22, iCVBT22W, iCVBT22X (X could be single or multiple digits by any alphabets and punctuation marks denoting different year version, buyers and cabinet colors) Confirmed by:

David Stetin

Attestation Statements 2023.05.29 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID: EMOICVBT22B SDI Technologies Inc., the undersigned, hereby authorize SDI Technologies Inc. to act as our designated U.S. agent for service of process, SDI Technologies Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SDI Technologies Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information Company name:SDI Technologies Inc. Contact Name:David Stetin Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Telephone No:732 574-9000 Email: dstetin@sditech.com U.S. Agent Information:

Company Name: SDI Technologies Inc. Contact Name: David Stetin Address: 1299, Main Street, Rahway, NJ 07065, U.S.A. Telephone No: 732 574-9000 Email: dstetin@sditech.com REN: 0003786449 Applicant Signature:

Agent Signature:

(if the agent is different from the applicant) Applicant printed name: David Stetin Agent printed name:David Stetin