iLW300 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 x 150 mm Material: 85 gsm wood free paper Jan. 17, 2023.
*FRONT POWERLIGHT PRO+
Foldable LED Lamp with Wireless Charging, USB Charging & Alarm Clock Model: iLW300 TOP PANEL WIRELESS CHARGING CHARGING LED TOUCH CONTROLS BACK SIDE USB 5V 1A 12V 2A USB CHARGING PORT DC JACK (12V/2A)
(for power supply) LAMP ARM AND HEAD ADJUSTMENT Note: Be sure to hold the lamp base while adjusting the angle of the light head WIRELESS CHARGING Place device face up on the charging rest. LED Status Indicators will show charging status:
Rapid blinking LED:
Slow blinking LED:
Solid LED:
Device is not charging (reposition device) Device is charging Device is fully charged WARNING: Remove phones metal protective case before charging. Do not place magnetic or metal objects on charger during charging. Qi compatible phones with metallic looking nishes will charge normally. POWER ON/OFF
- Press to turn the lamp On and Off LIGHT TEMPERATURE
- Press repeately to change the light temperature in following order Warm light Cool light Natural light BRIGHTNESS /
- Press to increase/decrease the brightness BACKUP BATTERY COMPARTMENT
(for clock accuracy and alarm setting backup) To replace the battery:
1. Make sure the AC adapter is connected, or you will lose your clock settings during battery replacement. 2. Use a Phillips screwdriver to unscrew the battery compartment door. 3. Remove the exhausted battery and insert a new CR2032 battery. Replace the compartment door. Do not overtighten the screw. Keep exhausted battery away from children and dispose of properly. Alarm Indicator Time Mode AM/PM Indicator TIME SET
- In Time Mode, press the button on the back to start setting the time
- Use / to set the hour and press button to conrm
- Use / to set the minute and press button to conrm
- Continue steps to set year, month, and date, and pres button to conrm clock settings Note: Use Button to set 12/24 hour display. ALARM SET
- Press the button on the back enter the alarm set and then press the to start setting the alarm time
- Use / to set hour and press button to conrm
- Use / to set the minute and press button to conrm
- Continue steps to set the Snooze Duration (1-60 minutes) and alarm sound (1-8) and press button to conrm alarm settings
- Press or to arm the alarm, press again to arm the snooze
- Press or again to disarm the alarm and snooze
- Press button to back to the time display
- The alarm will sound for one minute. Press or any other button to stop the alarm
- If snooze mode is armed, please or to snooze the alarm BACK SIDE REAR CONTROLS DISPLAY ICONS Snooze Indicator Alarm Set Indicator USB 5V 1A 12V 2A Month/
Date MONTH DATE DAY Day Temperature Celsius/
Fahrenheit TEMPERATURE In Time Mode, Use to change the temperature display between Celsius and Fahrenheit DISPLAY DIMMER Press button on the back to adjust Display Brightness: cycle through Hi, Lo and OFF MAINTENANCE
- Place the unit on a level surface away from sources of direct sunlight or excessive heat.
- Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. WARNING:
Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Allow Lamp to cool before handling. Light source can become hot during operation. 2. Do not stare at the light source directly while it is in use, risk of visual impairment. 3. This product is intended for use indoors only, in dry, enclosed rooms. Never in a wet environment or with wet hands in the vicinity of a bathtub, shower or swimming pool-Danger of Electric Shock!
2. Unplug unit and clean only with dry cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. 5. Only use attachments/accessories specied by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service This product should be serviced by qualied service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally. 8. No naked ame sources, such as lighted candles, should be placed on this product. 9. This product is suitable for use in tropical and/or moderate climates. WARNING:
- To reduce the risk of re or electric shock, do not expose this product to rain or moisture.
- Do not dispose of batteries in the household trash or re.
- The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm (8 inches) between the radiator & your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet quipement est aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformit. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modication non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. CAN ICES-3 (B) / NMB-3(B), CAN RSS-216 / CNR-216 iLW300-IS-011723-A 2023 SDI Technologies, Inc. All rights reserved Printed in China