FCC ID: EMOHBN21 Hotel Bluetooth FM Radio Alarm Clock with Line-in and USB Charging

HBN21 Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Matl: 100 gsm WF paper April 17, 2015 HBN21 Sta Quick Start Guide Remove thumbscrew and remove back cover to access sta controls Set Up AUX in cable When Low Battery Icon appears on display, replace backup battery with 1 fresh CR2450 battery. Keep unit connected to DC power when replacing battery or you will lose settings. Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. Included HBN21 system Universal AC adaptor HBN21 Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Matl: 100 gsm WF paper April 17, 2015 Setting the Time

(Factory Preset Clock) Including Year, Date, Month: This step is only required if the pre-set time is lost Time Zone Setting To set the Time Zone the unit should be in Power O Mode. Press and hold the time zone button. Connect the universal voltage AC adapter to the wall outlet and the DC jack on the back panel of the radio outlet DC 9V 2A time set time zone Daylight Saving Time The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. time set time zone WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, re, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal. Clock Setting Press and hold the time set button to enter clock setting mode Press the - or + button to set year Once sta has completed setup, replace security cover on back of unit and tighten thumbscrew. AUX in cable time set Press the time set button to conrm year time zone Press the - or + button to adjust time time set The currently set time zone will ash. Press the - or + button to adjust for your time zone. Zones are:

00 - ATLANTIC 01 - EASTERN 02 - CENTRAL 03 - MOUNTAIN 04 - PACIFIC 05 - ALASKA 06 - HAWAII Press the time set button to conrm time Press the - or + button to set date Press the time zone button to conrm time set Press the time set button to conrm Clock Setting time zone time set Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. HBN21QSG-150417 2015 HTI Industries, LLC. All rights reserved Printed in China HBN21 Legal Sheet - Front Size: 108 x 140 mm Printing Color: Black Matl: 100 gsm WF paper April 24, 2015 1C + 1C HBN21 Legal Sheet - Back Size: 108 x 140 mm Printing Color: Black Matl: 100 gsm WF paper Mar 31, 2015 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances

(including amplifiers) that produce heat. or as marked on the appliance. 4. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions 5. Power-Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. openings or vents located on the product. 7. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any 8. Attachments Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service The unit should be serviced by qualified service personnel when:

A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing The user should not attempt to service the unit beyond those methods described in the users operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC Information equipment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Increase the separation between the equipment and receiver. Questions? visit www.hoteltech.com or call 1-888-744-6835 Toll Free LIMITED 30 DAY WARRANTY

(valid in contiguous U.S.A. only: not valid in Hawaii or Alaska) Hotel Technologies, a division of HTI Industries LLC, (hereafter referred to as Hotel Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 30 days from the date of receipt of the item. Should service be required by reason of any defect or malfunction during the warranty period, Hotel Technologies will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required:

1. Fax a representative at 915.633.1388 with a Return Authorization request including proof of purchase date

(i.e., invoice number and date from distributor or HTI) to receive a Return Authorization Number. Issuance of Return Authorization Number is subject to review prior to granting. NO ITEM CAN BE ACCEPTED WITHOUT A RETURN AUTHORIZATION NUMBER. 2. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 3. Send the unit by method agreed to with your representative to the Factory Service Center listed below:

Consumer Repair Department Hotel Technologies Inc. 1330 Goodyear Drive El Paso TX 79936-6420 NOTE: Improperly packed items or Items received without an RA # cannot receive credit. NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 30 days, and Hotel Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If you did not purchase this product directly from Hotel Technologies, please contact the appropriate distributor for their warranty terms IC Statement for RF Device This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. HBN21-150425-A 2015 HTI Industries, LLC. All rights reserved Printed in China

Project No.: 1504C151 Page 5 of 15 Project No.: 1504C151 Page 6 of 15 Project No.: 1504C151 Page 7 of 15 Project No.: 1504C151 Page 8 of 15 Project No.: 1504C151 Page 9 of 15 Project No.: 1504C151 Page 10 of 15 Project No.: 1504C151 Page 11 of 15 Project No.: 1504C151 Page 12 of 15 Project No.: 1504C151 Page 13 of 15 Project No.: 1504C151 Page 14 of 15 Project No.: 1504C151 Page 15 of 15

Project No.: 1504C151 Page 2 of 15 Project No.: 1504C151 Page 3 of 15 Project No.: 1504C151 Page 4 of 15

Model: HBN21 Frequency Range:

Clock Backup:

AC Adaptor:

Service Number:

Manufactured by HTI Industries LLC FM 87.5 - 108 MHz DC 3V, CR2450 x 1 DC 9V, 2A HBN21-A-A www.hoteltech.com Made in China Patents: www.ihome.com/patents CE logo 5mm height EMOHBN21 986B-HBN21 WEEE logo 7mm height HBN21 model plate Print:White Material: PET sheet (black) Mar 11, 2015 C A N I C E S - 3 ( B ) / N M B - 3 ( B )

RF_160, Issue 02 Declaration of Authorization We Name: SDI Technologies Inc Address: 1299 Main St. City: Rahway State: New Jersey Country: United States Declare that:

Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Hotel Bluetooth FM Radio Alarm Clock with Line-in and USB Charging Type designation: HBN21; HBN21X; HBN21XC (X denote as color of cabinet) Trademark: iHome on our behalf. Date: 2015-04-27 City: Rahway Name: Jasjit Singh Function: Safety and Compliance fap Lf

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent. Signature:

FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: SDI Technologies Inc Address: 1299 Main St. City: Rahway,New Jersey Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: EMOHBN21 Reference number: ###H##

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material XX] Block Diagrams XX] Operational Description [X] Schematic Diagrams (0 Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

CJ Internal Photos User's Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2015-04-27 Name and signature of applicant: Jasjit Singh an i \

Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period