iBT371 QSG with melody version Size: 120 x 100 (mm) Date: Dec2 , 2019 BACK
**Nov2 Updatedsincenew BT module Waterproof Floatable Wireless Speaker Model: iBT371 BLUETOOTH: PAIRING & PLAYING SPEAKERPHONE Pairing the First Time Answer Call End Call FRONT 2s iHome iBT371 2s 2s iHome iBT371 In the Box iBT371 speaker charging cable carry strap Manual Pairing QUICK START GUIDE Power ON/OFF Color Mode Volume Up The speaker must be on and connected with a paired Bluetooth device to receive calls. When a call is received, playing music is muted to hear the ring tone. Press the Pairing/
Speakerphone Button to answer call. For call waiting function, use phone controls on your device. Press the Pairing/Speakerphone Button again to end call and resume previous function. WATERPROOF OPERATION For waterproof operation, ensure the waterproof cover on side of unit is pressed completely ush with the unit. Play/Pause/
Pairing/
Speakerphone Volume Down USB Charging Cable (included) CHARGE UNIT BEFORE USE ABOUT 3 HOURS Charge via USB AC adapter (not included) or other powered USB port LED Status Indicator Quick Flashing red = low battery Flashing red = charging Solid red = fully charged Flashing blue = pairing Make your Bluetooth device discoverable Press and hold Power Button for 2 seconds to turn speaker ON. The rst time the unit is powered on it will enter auto-pairing mode. Select iHome iBT371m on your devices Bluetooth menu to complete pairing. To manually pair, power ON then press and hold Pairing Button for 2 seconds. Press the Play/Pause Button to play/pause music. COLOR CHANGING MODES SLOW FAST FREEZE COLOR PULSE TO MUSIC PRESET PULSE OFF Press the Color Mode Button to cycle through modes water tight not water tight For warranty and full instructions visit: www.ihome.com/support For warranty and full instructions visit: www.ihome.com/support FCC Information FCC Radiation Exposure Statement FCC ID: EMOIBT371A IC: 986B-IBT371A This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) IC This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. iBT371QSG-120219-C Printed in China INSIDE Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter (3 feet). It will typically withstand rain, snow and being submersed in shallow water. Longer duration or deeper immersion that exceeds the tested limits may cause product failure and void the warranty. DO NOT immerse the unit in water for extended periods. DO NOT immerse the unit in water deeper than 1 meter
(about 3 feet). Make sure cover and surrounding surfaces are completely dry before opening cover to prevent moisture from damaging the internal electronics. Keep rubber cover free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the waterproof cover is not making a tight waterproof seal water may enter the unit. Rinse with tap water after immersion in salt water or swimming pool. DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth. Please heed all warning, read and follow all instructions and keep these instructions handy for future reference. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. Only use attachments/accessories specied by the manufacturer. This product should be serviced by qualied service personnel when the enclosure damaged or does not operate normally No naked ame sources, such as lighted candles, should be placed on this product Attention should be drawn to the environmental aspects of This product is suitable for use in tropical and/or moderate battery disposal climates. CAUTION Risk of explosion if battery is incorrectly replaced by an incorrect type. Replace only with the same or equivalent type. Bluetooth is a registered trademarks of Bluetooth SIG Inc. Bluetooth technology is incorporated under license from Bluetooth SIG Inc.