iCVBT10 Vanity Mirror - Quick Start Guide (English) Size: 153 x 140 mm (folded) Color: 2C + 2C (PMS Cool Gray 9C & PMS Uncoated 2705U) Material: 120 gsm WF paper Date: April 27, 2018 (cost down) PMS Cool Gray 9C PMS uncoated 2705 U iHome Beauty REFLECT PRO iCVBT10/iCVBT10 N Quick Start Guide Charging Mirror
!
Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet Red Battery Status LED outlet Charging Devices Blue Bluetooth Status LED Bluetooth Button Mirror MUST be connected to power for USB charging from the unit. Connect USB cable (not included) to USB port and the other end to your device to charge. Battery Level Indicators Red Battery Status LED Charging = solid red Fully charged = o Low Battery = ashing red (mirror is ON, not being charged) Press and hold the light button for 2 seconds to hear voice announce battery charge status (mirror must be ON). Charge your phone while getting ready!
Light Function Press light button to turn ON Hi/Mid/Lo/OFF for the best light brightness You look Amazing!
Detail Mirror Attach included 10x magnifying detail mirror wherever you like on the mirror face (or anywhere!) This mirror comes with a cleaning cloth to keep the large surface and detail mirror smudge free. The back of the spot mirror has SimpleStick micro suction material for easily attaching and detaching almost anywhere. For best results, clean SimpleStick material with oce tape. If more cleaning is need try washing with mild soap and water as needed. Perfect for eyeliner, eyebrow tweezing and more!
Bluetooth Audio Function Press power button to turn speaker On or O When mirror is On, press and hold the Bluetooth button on back of mirror for pairing mode, indicated by the blinking BLUE LED Select iHome REFLECT PRO on your devices Bluetooth menu to connect Press to play / pause Bluetooth audio Press to answer/end Bluetooth calls Press and hold for 2 seconds to decline Bluetooth calls Quick double press for next track Quick triple press for previous track Press and hold for 2 seconds and wait for beep to activate voice control with Siri / Google Assistant Press to lower or raise volume Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri/Google Assistant to play music and more. Go ahead, turn UP the volume!
Other Devices Connect non-bluetooth devices using the included cable and AUX IN jack. RESET AUX USB AUX IN audio works when Bluetooth audio is paused on connected Bluetooth device. IMPORTANT SAFETY INSTRUCTIONS wet basement. When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. GENERAL Please exercise caution when in use as the mirror is made of glass. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Do not use around aerosol products or in the presence of oxygen being administered. 4. Sunlight Never place the mirror in or expose the mirror to direct sunlight. The suns rays can reflect to become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes. 5. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 6. Power-Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 7. Cleaning The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 8. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 9. Attachments Do not use attachments not recommended by the product manufacturer. 10. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 11. Overloading Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 12. Damage Requiring Service The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 13. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 14. Servicing The user should not attempt to service the unit beyond those methods described in the users operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel 15. Follow all instructions. 16. Clean mirror surface only with included dry cloth. 17. Only use attachments/accessories specified by the manufacturer. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Increase the separation between the equipment and receiver. QDID: B020415 FCC ID: EMOICVBT10N IC: 986B-ICVBT10N IC Statement for RF Device This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. For warranty and full instructions visit: www.ihome.com/support 2018 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free Siri is a trademark of Apple, Inc. in the United States and other countries. Google Assistant is a trademark of Google, Inc. April 27, 2018 iCVB10-180427-B Printed in China