iBT370 QSG Size: 120mmW x 100mmH folded: 60mmW x 100mmH Nov 15, 2016 material: 350gsm2 art card, 2C + 1C PMS7467C BACK iBT370 QSG-FR Size: 120mmW x 100mmH folded: 60mmW x 100mmH Nov 17, 2016 material: 350gsm2 art card, 2C + 1C FRONT BACK FRONT Model: iBT370 Model: iBT370 Modle: iBT370 Modle: iBT370 Water Resistant Wireless Speaker QUICK START GUIDE Water Resistant Wireless Speaker QUICK START GUIDE CHARGE UNIT BEFORE USE - ABOUT 2 HOURS Water Resistant Wireless Speaker GUIDE DE DEMARRAGE RAPIDE Water Resistant Wireless Speaker GUIDE DE DEMARRAGE RAPIDE A CHARGER AVANT UTILISATION-
ENVIRON 2 HEURES Bluetooth: Pairing & Playing Make your device discoverable by turning on Bluetooth mode Press and hold the Power Button to turn on unit Pairing the First Time Manual Pairing
-OR-
The rst time the unit is powered on it will enter auto-pairing mode Power on speaker Press and hold the Bluetooth Pairing Button for 2 seconds Select iHome iBT370 on your devices Bluetooth menu to complete pairing Press the Play/Pause Button to play/pause music Speakerphone The speaker must be on and connected with a paired Bluetooth device to recieve calls Press the End/Answer Call Button to answer call Press the End/Answer Call Button again to end call In the Box iBT370 speaker charging cable Connect the micro-USB plug on the included charging cable to the USB charging jack on the speaker. Connect the larger USB plug to a powered USB port such as a USB AC adapter. USB AC adaptor
(not included) USB AC adaptor connected to working outlet Battery/Bluetooth indicators Flashing red = low battery Solid red = charging Red LED o = fully charged Flashing blue = pairing Solid blue = paired Waterproof Operation For waterproof operation, ensure the waterproof cover on top of unit is pressed completely ush with the unit Couplage et lecture Bluetooth Rendez votre appareil dtectable en activant le mode Bluetooth Appuyez sur le bouton dalimentation pour allumer iBT370 Premier couplage Couplage manuel
-OU-
Lorsque lunit est allume pour la premire fois, elle passe automatiquement en mode couplage Mise sous tension du haut-parleur Une fois l'appareil allum, maintenez appuye pendant 2 secondes le bouton de Couplage Bluetooth Slectionnez iHome iBT370 dans le menu Bluetooth de votre appareil pour terminer le couplage Appuyez sur le bouton Lecture/Pause pour lancer/suspendre la lecture de musique Haut-parleur mains libres L'enceinte doit tre allume et couple avec un appareil Bluetooth pour pouvoir recevoir des appels Appuyez sur le bouton Fin d'appel/Rpondre pour rpondre un appel Pour la mise en attente d'un appel, utilisez les boutons de tlphone de votre appareil Appuyez sur le bouton Fin d'appel/Rpondre pour terminer lappel Contenu de l'emballage Enceinte iBT370 Cble de charge Insrez le connecteur micro USB du cble de charge fourni dans le port de charge USB de lenceinte Connectez la plus grande prise USB un port USB aliment comme un adaptateur secteur USB Adaptateur secteur USB
(non fourni) Ordinateur connect une prise sous tension Indicateurs de batterie / Bluetooth Rouge clignotant = batterie faible Rouge solide = se charge LED rouge teinte = compltement charg Bleu clignotant = appariement bleu solide = appari tanchit l'eau Pour assurer l'tanchit l'eau, veillez ce que le joint d'tanchit situ sur le ct de l'appareil soit enfonc fond Contact Us: 18002882792 For warranty and full instructions visit: www.ihome.com/support Contact Us: 18002882792 For warranty and full instructions visit: www.ihome.com/support Contactez-nous : 18002882792 Pour obtenir des informations sur la garantie et le Guide dutilisation complet rendez-vous sur : www.ihome.com/support BACK FCC Information FCC Radiation Exposure Statement FCC ID: EMOIBT370 IC: 986B-IBT370 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. iBT370-161115-A Printed in China 11/15/2016 Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. BACK nonc FCC FCC ID: EMOIBT370 IC: 986B-IBT370 Dclaration de la FCC relative l'exposition aux radiations Cet quipement est conforme aux limites d'exposition aux radiations de la FCC RF xes pour un environnement non contrl. Cet appareil est conforme la section 15 des rglements de la FCC, son utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interfrences nuisibles et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent causer un mauvais fonctionnement. Avertissement : Tout changement ou modication apport cet appareil sans le consentement expresse de la partie responsable pour la conformit peut annuler le droit de l'utilisateur d'utiliser cet appareil. REMARQUE : Cet quipement a t test et jug conforme aux limitations pour un appareil numrique de Classe B, selon la Section 15 de la rglementation FCC. Ces limites sont conues pour orir une protection raisonnable contre les interfrences nocives d'une installation rsidentielle. Cet quipement gnre, utilise et peut mettre des frquences radio et, s'il n'est pas install et utilis selon les instructions, peut causer des interfrences nuisibles aux communications radio. Cependant, il n'y a aucune garantie qu'une interfrence ne prendra pas place dans une installation particulire. Si cet quipement ne cause pas d'interfrence nocive la rception de la radio ou du tlviseur, ce qui peut tre dtermin en allumant et fermant l'quipement, l'utilisateur est encourag tenter de corriger l'interfrence en utilisant l'un ou l'autre des moyens suivants :
Rorientez ou resituez l'antenne de rception. Augmentez la sparation entre l'quipement et le rcepteur. Branchez l'quipement dans une prise d'un circuit dirent que celui dans lequel est branch le rcepteur. Consultez le marchand ou un technicien expriment en radio/tlviseur pour obtenir de l'aide. CAN ICES-3 (B)/NMB-3(B) Dclaration d'Industrie Canada (IC) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. iBT370-161115-A(FR) Printed in China Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge GENERAL BATTERY PRECAUTIONS Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or re. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children.