FCC ID: EMOIBT371B WATERPROOF FLOATABLE WIRELESS SPEAKER

iBT371 QSG (cost down version) Size: 180 x 100 (mm) Folded: 60 x 100 (mm) Date: June 28, 2023 v14 Material: 120gsm art paper

PMS7694C BACK FRONT Waterproof Floatable Wireless Speaker

QUICK START GUIDE In the Box iBT371 speaker charging cable carry strap Manual Pairing BLUETOOTH: PAIRING & PLAYING Pairing the First Time

SPEAKERPHONE Answer Call End Call RO The speaker must be on and connected with a paired Power Color Volume 3 Bluetooth device to receive calls. ON/OFF Mode Up . When a call is received, playing music is muted to 7\ hear the ring tone. Press the Pairing/Speakerphone Button to answer call. For call waiting function, use Make your Bluetooth device discoverable phone controls on your device. Press and hold Power Button for 2 seconds to turn Press the Pairing/Speakerphone Button again to end speaker ON. call and resume previous function.

= USB Charging The first time the unit is powered on it will enter Press and hold the Pairing/Speakerphone Button to Play/Pause/ Volume Cable (included) auto-pairing mode. reject call. Pairing/ Down Select iHome iBT371 on your devices Bluetooth Speakerphone menu to complete pairing. WATERPROOF OPERATION Ch ia USB AC To manually pair, power ON then press and hold |

CHARGE UNIT arge via Us Pairing Button for 2 second For waterproof operation, ensure the waterproof BEFORE USE a eee coed Press the Play/Pause Button to play/pause music use ae side of unit is pressed completely flush with i i ie unit. ABOUT 3 HOURS USB port the control on your device to navigate tracks. COLOR CHANGING MODES water LED Status Indicator ty tight Quick Flashing red = low battery Ws SLOW FAST FREEZE COLOR Flashing red = charging (* PULSE TO MUSIC > PRESET PULSE > OFF Solid red LED = fully charged not Flashing blue = pairing water Solid blue= BT connected Press the Color Mode Button to cycle through modes tight For warranty and full instructions For warranty and full instructions visit: www.ihome.com/support visit: www.ihome.com/support June 28, 2023 June 28, 2023 June 28, 2023 June 28, 2023 INSIDE FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. operation.

+ Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

+ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause . harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or . television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, &

* Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) . ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. =

The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions: 1, This device may not cause interference. 2. This device Het accept any interference, including interference that may cause undesired operation of *

e device. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Lappareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur I'exposition aux RF et la conformit. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : 1) Lappareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioglectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler le droit de |'utilisateur a utiliser I'quipement. iBT371QSG-062823-F Printed in China WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:

Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations. Many electronics retailers now recycle batteries and other electronic components at no charge GENERAL BATTERY PRECAUTIONS

* Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. Avoid charging a rechargeable battery when the temperature is not within 5C - 35 C (41 - 95 Fahrenheit). Never expose a battery to any liquid. Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep batteries out of the reach of infants and small children. If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage. Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable. Bluetooth is a registered trademarks of Bluetooth SIG Inc. Bluetooth technology is incorporated under license from Bluetooth SIG Inc. IMPORTANT SAFETY INSTRUCTIONS

* The unit is P67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter (3 feet). It will typically withstand rain, snow and being submersed in shallow water. Longer duration or deeper immersion that exceeds the tested limits may cause product failure and void the warranty.

* DO NOT immerse the unit in water for extended periods.

* DO NOT immerse the unit in water deeper than 1 meter (about 3 feet).

* Make sure cover and surrounding surfaces are completely dry before Opening cover to prevent moisture from damaging the internal electronics.

* Keep rubber cover free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the waterproof cover is not making a tight waterproof seal water may enter the unit.

+ Rinse with tap water after immersion in salt water or swimming pool.

* Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. Please heed all warning, read and follow all instructions and keep these instructions handy for future reference.

* Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

* Unplug this product during lightning storms or when unused for long periods of time.

+ Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

* Only use attachments/accessories specified by the manufacturer.

* Damage Requiring Service - This product should be serviced by qualified service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the enclosure.

- The unit has been dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does not operate normally.

* No naked flame sources, such as lighted candles, should be placed on this product

* Attention should be drawn to the environmental aspects of battery disposal

* This product is suitable for use in tropical and/or moderate climates.

* CAUTION - Risk of explosion if battery is incorrectly replaced by an incorrect type. Replace only with the same or equivalent type.

August 22, 2023 SDI Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK(DONGGUAN) CO., LTD. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, David Stetin

SDI Technologies Inc. August 22, 2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: EMOIBT371B SDI Technologies Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, David Stetin SDI Technologies Inc. August 22, 2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: EMOIBT371B SDI Technologies Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, David Stetin

August 22, 2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR

Product Name WATERPROOF FLOATABLE WIRELESS SPEAKER iBT371, iBT371X (X could be single or multiple digits by any alphabets and punctuation marks denoting different cabinet colors, year versions and clients) EMOIBT371B

: SDI Technologies Inc.

: 1299, Main Street, Rahway, NJ 07065, U.S.A. Model Number FCC ID applicant Address

) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram, Schematics, Operational Description) required to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST (The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors.) Please contact me if there is any information you may need. Sincerely, David Stetin

SDI Technologies Inc. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component. Only different on model number. Production name WATERPROOF FLOATABLE WIRELESS SPEAKER Trademark iHome FCC EMOIBT371B Model no. iBT371, iBT371X (X could be single or multiple digits by any alphabets and punctuation marks denoting different cabinet colors, year versions and clients) Confirmed by:

David Stetin

Attestation Statements August 22, 2023 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID: EMOIBT371B SDI Technologies Inc., the undersigned, hereby authorize SDI Technologies Inc. to act as our designated U.S. agent for service of process, SDI Technologies Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SDI Technologies Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information Company name:SDI Technologies Inc. Contact Name:David Stetin Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Telephone No:732 574-9000 Email: dstetin@sditech.com U.S. Agent Information:

Company Name: SDI Technologies Inc. Contact Name: David Stetin Address: 1299, Main Street, Rahway, NJ 07065, U.S.A. Telephone No: 732 574-9000 Email: dstetin@sditech.com REN: 0003786449 Applicant Signature:

Agent Signature:

(if the agent is different from the applicant) Applicant printed name: David Stetin Agent printed name:David Stetin