FCC ID: VA5JA1000-2WFMX Keyless Entry System

User r Ma l anual By Firstec ch LLC, Ve ersion: 1.0 App 2WQ plicable to Q9R-FM 2W the follow Way 5Butto wing remote on LCD Rem e(s);

mote FCC ID IC Numbe I er VA5 5RCL300-2W WFX VA5 5JA1000-2W WFMX WWW.C COMPUSTA AR.COM 7087 7A-2WRCL3 300FX 708 87A-2WA100 00FX Model Nam M me M 2WQ9R-FM X ANT-2WFMX A WARNING It is the responsibility of the vehicle operator to ensure that their vehicle is parked in a safe and responsible manner.

(1) When leaving the vehicle, it is the users responsibility to ensure that the gearshift lever is in Park in order to avoid accidents upon remote starting. (Note: Make sure that the automatic vehicle cannot star in Drive.)

(2) It is the users responsibility to ensure that the remote starter is disabled or put into valet mode before servicing. FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. ISED COMPLIANCE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC/ ISED Radiation Exposure Statement For ANT-2WFMX2: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Specification 2WQ9R-FM : 433.92 / FSK ANT-2WFMX : 433.92 / FSK Introduction Thank you for purchasing a Firstech system for your vehicle. Please take a minute to review this entire manual. Note that this manual applies to the 2 Way 5 Button Liquid Crystal Display Remote

(2WQ9R-FM) whether you purchased the ALARM IT, START IT, or MAX IT system. There are certain features listed in this manual that may not be available for your system. There may also be features listed in this manual that require additional installation or programming before they are active. If you have any questions or concerns please contact the original place of purchase. For further information you may also contact our customer support center at 888-820-3690. Warranty Coverage Caution: The Manufacturers warranty will be voided if this product is installed by anyone other than an Authorized Firstech dealer. For complete warranty details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase. Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We do not include a mail in warranty registration card with each unit registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place. Quick R Referen nce Remote Mainten ance B Battery R Replacem ment The only re programmin egular maint ng is requir tenance this ed when re s system re placing the equires is re battery. emote contr ol battery re eplacement t. No Turn the re cover off, re mote over a evealing the and unlock e AAA batte the battery ery. cover by sl liding the bl ack button IMPORTAN NT: Be sure e to observe e correct po olarity when installing th he battery. 2 Way R Remote B Button Fu s unctions Butto on n Duration Des scription Short(0.5 se S ec) Locks s doors and if equipped d, arms the push. Slide y e the battery alarm. Double Long(2.5 se L ec) Short(0.5 se S ec) Double Unloc cks doors an nd if equipp ed, disarms s the alarm

. Holdin shut y Car C Auxilia Remo Acces See R ng this butto your vehicle Check (upda ary / Tempe ote Voltage sses Remot Remote Men on will start e down. ates vehicle erature Disp Display te Menu (Pa nu Table fo your vehicl le. Repeat a and this will status on r play / Vehic remote page cle Voltage D e er) / Secure Display /

assive armi r details. ng, Alert mo ode, etc) alarm. Short(0.5 se S ec) Locks s doors and if equipped d, arms the Short(0.5 se S ec) Unloc cks doors an nd if equipp ed, disarms s the alarm

. Double Long(2.5 se L ec) Double Long(2.5 se L ec) as Auxiliary Used ding to the accord Not av vailable whe

. menu

/vehicle loc Panic/

ds siren and sound as Auxiliary Used ding to the accord Not av vailable whe

. menu ime extende Run ti ote Start. Remo y 1 and Slid setting of A en set to O ding door rig AUX 1 Confi FF in AUX ght, Defrost ig in the rem 1 Config of function mote menu. e the remote cater (flashe d horn). es vehicles parking ligh hts and y 2 and Slid setting of A en set to O ding door lef AUX 2 Confi FF in AUX 2 ft, Head ligh ig in the rem 2 Config of hts function mote menu. e the remote er. Resets t the run time e for Turbo T Timer or Short(0.5 se S ec) LCD V View Long(2.5 se L ec) Trunk the ve k release. Tr ehicles trun riggers the nk. trunk releas se output an nd opens Long(2.5 se L ec) Option n programm ming menu 1 1. For use d during insta allation. Long(2.5 se L ec) Option n programm ming menu 2 2. For use d during insta allation. Function n Button Menu Butto on n Duration Des scription Double Enter remote me enu Long(2.5 se L ec) Exit re u emote menu Short(0.5 se S ec) Remo ote menu se election and d operation. or Remote Short(0.5 se S ec) Move Short(0.5 se S ec) Move Option M Menu Ta ble Featu ure Sele ect Passive a arming Alert m ode to the up o of the remote e menu to the dow n of the rem mote menu Func ction / Des scription Passive arming On

/Off Sets you Set to F to HALF ur remote fo ULL for ALA F for START or Alarm or ARM IT and T IT ONLY s Starter Onl d MAX IT fe systems. y systems. t eatures. Set Valet m mode Valet mo ode On/Off AUX 1 c config AUX 2 c config AUX M ode Langua age Tempera ature Used as function the remo s Auxiliary 1 according t ote menu. and Sliding to the settin g door right ng of AUX 1 t, Defrost 1 Config in Used as function the remo s Auxiliary 2 according t ote menu. 2 and Sliding to the settin g door left, ng of AUX 2 s Head lights 2 Config in Turns yo our Auxiliary y Extender feature on or off. Change French o s LCD disp or Spanish. lay languag ge from Eng glish to s the tempe erature read dout from F o ahrenheit to Change Celsius. If the tem tempera mperature s ature is not d setting is se displayed. et to off, the Turbo ti imer Turbo O On/Off Sound/Vib bration Screen tim meout Turns th Adjust th is the hig he silent mo he volume o ghest. ff. de on or off ote. 1 is the of your remo e lowest. 3 Adjusts is presse the time yo ed. ur LCD will stay on aft er a button Timer s start Timer St tart On/Off Drive lo ock Drive Lo ock On/Off 2nd car m mode Shock se ensor 2nd Car r Mode On/O Off Shock s ensor On/O Off n Siren Siren On n/Off Auxiliary y Extend der Butto on Table Butto on n Duration De scription Short(0.5 se S ec) Auxili iary 1 Short(0.5 se S ec) Auxili iary 2 Short(0.5 se S ec) Auxili iary 3 Short(0.5 se S ec) Auxili iary 4 Long(2.5 se ec) Auxili iary 5 Long(2.5 se ec) Auxili iary 6 Long(2.5 se ec) Auxili iary 7 Descrip ption of f antenn na modu ule insta allation positio on

<< Antenn na Module >

< Harness >

<< Ins tallation of f Antenna M Module >>

Note: Use The the w the power o Antenna m windshield. of car batter module have ry(+12volts) e been calib

). brated for ho orizontal ins stallation at the left-top corner of Remote IMPORTAN operations. e Codin NT: Every F All remotes ng / Prog Firstech rem s must be c grammi mote must b coded at the ing Rou be coded to e same time utine the system e. prior to pe rforming an ny Program STEP 1: Ac the Acc & O the success STEP 2: W remotes or to confirm t mming Re ctivate Vale On positions sful comple Within 2 seco r the (lock) the transmit emotes:

et/Programm s) five times etion of this onds after c button on 1 tter has bee ming mode s within 10 s step. cycling the ig way remo en coded. by manually seconds. T y turning th he vehicles e ignition ke s parking lig ey on and o ghts will flas off (between n h sh once with gnition for t otes for a ha he 5 time, t alf second. tap the Loc The parking ck button on g lights will n 2 way flash once th Exiti lights ng Program s will flash tw mming: Pro wice signali ogramming ing the end is a timed s of program g The parking sequence. T e. mming mode Prog step remo flash can r gramming M 2, code add otes or the once confir recognize u Multiple Re ditional rem

(lock) butto rming each p to 4 remo otes. emotes: Aft motes by pre n on 1 way additional r ter the confi essing butto y remotes. T remote. All irmation flas on (I) on 2 w The parking compatible sh given in way g lights will e systems Remote Start Error Diagnostic If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following those three flashes the parking lights will flash again corresponding to the error table. Number of Parking Light Flashes 1 2 3 4 5 6 7 8 9 10 Remote Start Error Motor running or must first program tach Key in ignition on position Door open (manual transmission only) Trunk open Foot brake on Hood open Reservation off (manual transmission only) Tach or tachless sensing failure FT-DAS sensor shutdown System is in Valet Mode We recommend that you do not attempt any repairs on your remote starter. Contact your dealer or call us directly. Remote Start Shutdown Error Codes If the remote start sequence has been completed and the vehicle shuts down, the vehicles parking lights will flash 4 times, pause then flash again with the error code. Tap button 4 on 2 Way remotes to initiate the shutdown error codes. On 1 Way remotes hold the Trunk and Start buttons together for 2.5 seconds. Number of Parking Light Flashes 1 2 3 4 Remote Start Shutdown Error Lost engine sensing signal Lost emergency brake signal Foot brake triggered Hood pin triggered Limited Lifetime Warranty Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product. When the original purchaser returns the product to the retail store where it was purchased or prepaid postal to Firstech, LLC., 21903 68th Avenue South, Kent, WA 98032, USA within the warranty period, and if the product is defective, Firstech, LLC, will at its option repair or replace such. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTAPILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights, which vary State to State. Firstech, LLC. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of Compustar, Compustar Pro, Arctic Start, Vizion, or NuStart. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Your Warranty The product's warranty is automatically void if the date code or serial number is defaced, missing or altered. This warranty will not be valid unless you have completed the registration card at www.compustar.com within 10 days of purchase.

Label and Location ANT-2WFMX Label SIZE 15.7X8.9

<< Label Location >>

Name: Youngil Chang Title: CEO Signature of applicant:

Date: March 17, 2023

SEGI LIMITED Section 2.911(d)(5)(i) Certification Equipment Type Company name: SEGI LIMITED Address: Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG Product Name: Keyless Entry System FCC ID: VA5JA1000-2WFMX Model(s): ANT-2WFMX 2.911(d)(5)(i) Equipment Type We, [SEGI LIMITED] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Young il Chang Date: February 27, 2023 Title and Company name: CEO, SEGI LIMITED NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

SEGI LIMITED Section 2.911(d)(5)(ii) Certification Applicant (Covered List

) Company name: SEGI LIMITED Address: Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG Product Name: Keyless Entry System FCC ID: VA5JA1000-2WFMX Model(s): ANT-2WFMX 2.911(d)(5)(ii) Applicant filing We, [SEGI LIMITED] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Young il Chang Date: February 27, 2023 Title and Company name: CEO, SEGI LIMITED NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

SEGI LIMITED Section 2.911(d)(7) USA Agent for Service of Process Company name: SEGI LIMITED Address: Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG Product Name: Keyless Entry System Grantee code: VA5 Model(s): ANT-2WFMX 2.911(d)(7) USA Designated Agent for Service of Process We, [SEGI LIMITED] (the applicant) designate [Firstech, LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Firstech, LLC Address: 21903 68th Ave. South Kent Washington United States (98032) Applicant Company name: SEGI LIMITED Address: Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG, China FCC Grantee Code: 2BAF6 FRN No.: 0033475344 Contact Name: Namwoo Kim Telephone No: (888) 820-3690 Email: nkim@compustar.com Signature:

Title: Engineering Director Date: March 03, 2023 FCC Grantee Code: VA5 Contact Name: Young il Chang Telephone No: 852-2682-6432 Email: Segihk@gmail.com Signature:

Title: CEO Date: March 03, 2023 2.911 (d)(7)USA Agent v1.3 SEGI LIMITED NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.3

SEGI LIMITED Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG, China Date: Feb. 27, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: VA5JA1000-2WFMX To Whom It may Concern:

Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SEGI LIMITED Here by requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SEGI LIMITED temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT SHORT-TERM 1 2 3 4 5 6 7 8 Block Diagram Schematics Part List Operation Description Internal photo NA NA NA The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Young il Chang President

Letter of Authorization Company:

SEGI LIMITED Address:

Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG, China Product Name:

Keyless Entry System Model Number: ANT-2WFMX FCC Identifier: VA5JA1000-2WFMX We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Youngil Chang Date: March 17, 2023 Title: CEO Signature of applicant:

SEGI LIMITED Responsibility Declaration Letter Company name: SEGI LIMITED Address: Unit J2, 4/F, Block 1, Kinho Industrial Building, 14-24 Au Pui Wan Street, Shatin, New Territories, HONGKONG, China Product Name: Keyless Entry System FCC ID: VA5JA1000-2WFMX Model(s): ANT-2WFMX Model(s) Difference Description: N/A We, [SEGI LIMITED], hereby acknowledge that all the product information (including all original, drafted, or modified documents) provided to the TCB either by us or our agent or representative(s) for the purposes of FCC certification will meet FCC regulations and requirements; and that any modifications or changes made as a result of TCB review of the documents will be formally implemented into the manufacturing process and product documentation shipped with equipment. We also confirm that all information provided is legitimate and does not contain any false content such as forgery, fabrication, alteration, tampering and concealment. We assume all economic and legal responsibilities in matters that may arise as a result of disclosure on sample products and associated product documentation provided for product certification that may subsequently be found to be a mis-

representation of the final product and accompanying documentation when produced, marketed, or sold in the United States, Canada, or anywhere in the world. Your sincerely, Name: Youngil Chang Date: March 17, 2023 Title and Company name: CEO / SEGI LIMITED Signature of FCC grant holder (Include Title, Company name, date, and official company stamp):

Responsibility Declaration Letter v1.0