FCC ID: VA5CMT348-X2MAX MODEM

User Manual By Firstech LLC, Version: 1.1 Model Name FCC ID IC Contains FCC ID Contains IC DR-X2MAX VA5CMT348-X2MAX 7087A-CMT348X2M XMR2020BG95M1 10224A-2020BG95M1 WARNING It is the responsibility of the vehicle operator to ensure that their vehicle is parked in a safe and responsible manner.

(1) When leaving the vehicle, it is the users responsibility to ensure that the gearshift lever is in Park in order to avoid accidents upon device starting. (Note: Make sure that the automatic vehicle cannot star in Drive.)

(2) It is the users responsibility to ensure that the device is disabled or put into valet mode before servicing. FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. IC COMPLIANCE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions su ivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. a. Part 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. b. Part 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. c. RF exposure This device should be installed and operated with minimum 20 cm between the radiator and your body. User Registration 1. To create a DroneMobile Account, please begin by downloading the free DroneMobile App from the App Store or Google Play. Open the DroneMobile App and press "Register". 2. Enter the DR-X2 MAX serial number printed on the Keychain Tag. You can do this quickly by pressing "Scan" in the DroneMobile App, or by manually inputting the serial number. If you did not receive a keychain tag from your dealer/installer, please contact them immediately to retrieve this information. You will be unable to create an account without your serial number. 3. Once you have entered your serial number, please input a valid email address. This will be your DroneMobile username. 4. To confirm your email address, please check your inbox for a confirmation email. Once you have received the email, please click the link to complete the registration process. If you do not receive the confirmation email, refresh your email or check your junk/spam folder. 5. Reopen your DroneMobile App to begin your connected car journey!

Online Support : https://support.dronemobile.com Toll-Free Support : 1(888)820-3690 Facebook : @dronemobile BASICS OF USING DRONEMOBILE 1. How to register your new DroneMobile system from the app Upload Profile Picture Upload vehicle image Add vehicle detail Enable location services Enable push notifications 2. The DroneMobile Home Screen and the information that it shows

- Location

- Drivers

- Battery

- Status

- Temperature

- Driving

- System BASICS OF USING DRONEMOBILE 3. Remote starting and controlling your vehicle from the DroneMobile App

- Start / Stop

- Lock / Unlock

- Aux 1

- Aux 2

- Trunk

- Panic 4. Viewing your vehicle's activity on the Activity Page

- Activity (Alerts & Feed)

- Vehicle Info

- Setup 5. Adjusting settings for your DroneMobile System 6. Setting your App Preferences for the DroneMobile App Dealer Activation & Installation 1. Confirm your DR-X2 MAX is connected to power by verifying that the on-board LEDs are lighting up. DR-X2 MAX modules can be connected to power via the following:

A direct connection to a compatible aftermarket remote start or security system using the included data harness. 2. Go to myFirstech Install at https://install.myfirstech.com using your desktop, tablet, or smartphone's web browser. Note: Internet Explorer is not supported. 3. Login to your DroneMobile Dealer Account and enter the DR-X2 MAX device's serial number. It is the top barcode on the module sticker. You cannot use your personal DroneMobile User Account to activate a DR-X2 MAX. If you do not have a dealer login, you can "Activate as Guest". You will also be required to also enter the DR-X2 MAX device's ICC ID. 4. Activate, test, and configure your DR-X2 MAX system by following the prompts on your web browser. IMPORTANT NOTICE:

For your security, the DR-X2 MAX is equipped with a Lithium-ion Backup Battery, which automatically activates in the event of main battery shutoff. If connected to the DroneMobile app, the DR-X2 MAX will alert you when the backup battery is activated. Do not attempt to disassemble, open or service the battery pack. Do not crush, puncture. or dispose of in fire or water. Do not store above 140F (60C) Do not place near sources of heat or sunlight Product highlights :

connects your smartphone to your aftermarket security or remote start system uses AT&T 4G LTE wireless network connection alternate Verizon network connection available with optional SIM card compatible with iOS and Android smartphones, tablets, watches, and laptops DroneMobile subscription required dronemobile.com/subscription for more details Unlimited range when phone and car are both connected to network Features :

Smartphone Control :

remote start/stop, lock/unlock, monitor security, receive alerts, and more GPS :

functions include locating, tracking, curfew alerts, history log, and more Security:

built-in security sensors detect shock, tilt, glass-break, and towing when triggered, they activate your vehicle's security alarms and send you an alert via Drone Mobile built-in lithium-ion backup battery triggers alert when car battery is cut off

Label and Location DR-X2MAX Size Label 39.8 x 44.8mm

* This label is attached to the back of the product and not easily removed.

SEGI LIMITED Date: 7th of March, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Inc. (formerly UL CCS) Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern:

I, the undersigned, hereby authorize UL-Korea and hereafter referred to as ULK, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL-Korea on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ULK as our agent, we still recognize that we are responsible to:

a) b) c) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) f) g) h) i) j) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, By Young il Chang President SEGI LIMITED REMARK:

1. 2. 3. This authorization letter will be sent along with your application when filing with the Certification Division. Please follow the format and type it on company letterhead and send original to us. Authorized signature must be in agreement with grantee code contact in FCC database.

CFR 47 2.911 (d)(5) Attestation Date: 03-07-2023 FCC ID: VA5CMT348-X2MAX To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. SEGI LIMITED (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. SEGI LIMITED (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name:

Young il Chang Job Title:

President Company Name: SEGI LIMITED

CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Date: 03-07-2023 FCC ID: VA5CMT348-X2MAX To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent Company Name : Firstech, LLC FRN: 0033475344 Agent Contact Name : Namwoo Kim Agent US Address : 21903 68th Ave. South Kent, WA 98032 US Agent Email Address : nkim@compustar.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of SEGI LIMITED(the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Authorized Agent Contact Person Name : Namwoo Kim Agent contact Job Title : Engineering Director Agent Company name : Firstech, LLC

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: 03-07-2023 FCC ID: VA5CMT348-X2MAX To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA SEGI LIMITED (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

Contact Person : Namwoo Kim Company Name : Firstech, LLC Company Address : 21903 68th Ave. South Kent, WA 98032 US Email : nkim@compustar.com Sincerely yours, Name:

Young il Chang Job Title:

President Company Name: SEGI LIMITED

SEGI LIMITED Workshop J2, 4th floor of Block 1, Kinho Industrial Buildings Nos 14-24 Au Pui Wan street, Shatin, N.T, Hongkong Date: March 7, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: VA5CMT348-X2MAX To Whom It may Concern:

Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SEGI LIMITED. Here by requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SEGI LIMITED. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT SHORT-TERM 1 2 3 4 5 6 7 8 Block Diagram Schematics Part Lists Operation Description Internal photo User Manual NA NA The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Young il Chang President