COMPANY CONFIDENTIAL FuGui Precision Industrial (Nanning) Co., LTD. No.51, Tongle Boulevard, Shajing, Jiangnan District, Nanning, P. R. CHINA Tel: 86-0771-2168888 Ext:30726 FAX: 86-0771-2168888 Ext:64886 J26H006 Delivery Specification 802.11b/g/n(1x1) WiFi+ Bluetooth 2.1/4.2 Combo 11n+BT Combo Module J26H006 1.1 Reviewed by Approved by Function Project Name Part No. Delivery Specification Rev. Prepared by 1 COMPANY CONFIDENTIAL Content 0. REVISION HISTORY ........................................................................ 3 1. INTRODUCTION ........................................................................... 4 1.1 SCOPE ................................................................................... 4 1.2 FUNCTION ................................................................................ 4 1.3 SPECIFICATION BY MODEL ................................................................... 4 1.4 MODULE WEIGHT .......................................................................... 4 1.5 PRODUCT REGULATORY ..................................................................... 5 2. MECHANICAL SPECIFICATION ............................................................. 5 2.1 MODULE MECHANICAL DRAWING .............................................................. 5 2.2 USB CONNECTOR .......................................................................... 7 2.3 RF SWITCH CONNECTOR .................................................................... 9 3.USB CONNECTOR PIN-OUT ................................................................. 9 5. ELECTRICAL SPECIFICATION ............................................................. 10 5.1 RECOMMENDED OPERATING CONDITION ....................................................... 10 5.2 RF CHARACTERISTICS ..................................................................... 10 5.3 CURRENT CONSUMPTION ................................................................... 11 5.4 EFUSE CONTENT .......................................................................... 12 5.5 POWER ON/OFF SEQUENCE ................................................................. 14 5.6 FLOATING PIN STATUS ...................................................................... 16 5.7 ANTENNA SPECIFICATION ................................................................... 16 5.8 OPERATING SYSTEM SUPPORT .............................................................. 18 6. LABEL INFORMATION .................................................................... 19 6.1 MAC-ID LABEL LASER MARKING ............................................................. 19 6.2 REGULATORY LABEL ....................................................................... 20 6.3 PANEL LABEL ............................................................................. 20 6.4 CARTON LABEL ........................................................................... 21 6.5 PALLET LABEL ............................................................................ 21 7. PACKING INFORMATION .................................................................. 23 7.1 MODULE SCAN GUIDE ...................................................................... 25 8. RELIABILITY ............................................................................. 26 8.1 HARDWARE RELIABILITY TEST ............................................................... 26 8.2 PACKAGE RELIABILITY TEST (TBD) ........................................................... 27 9. QUALITY ................................................................................. 27 9.1 QC FLOW CHART ......................................................................... 27 9.2 VISUAL INSPECTION STANDARD .............................................................. 28 9.3 PVT MFG. TEST PLAN ..................................................................... 28 2 COMPANY CONFIDENTIAL 0. Revision History Date Document revision Version Author Change Description 2017/08/25 2017/9/20 1.0 1.1 NA NA Fly Huang Fly Huang Initial released Update 4.1 Schematic Part 3 COMPANY CONFIDENTIAL 1. Introduction Project Name: J26H006 This documentation describes the engineering requirements specification of RTL8723DU 11n+BT Combo Module. It is a confidential document of Foxconn. 1.1 Scope This module design is based on Realtek RTL8723DU chipset .The RTL8723DU is a highly integrated single-chip 802.11b/g/n 1T1R WLAN, and an integrated Bluetooth 2.1/4.2 single chip with USB 2.0 multi-function. It provides a complete solution for a high performance integrated wireless LAN and Bluetooth controller. The RTL8723DU WLAN baseband implements Orthogonal Frequency Division Multiplexing (OFDM) with 1 transmit and 1 receive path and is compatible with the 802.11n specification. Features include one spatial stream transmission, spatial spreading, and transmission over 20MHz bandwidth. This module support antenna diversity for better coverage This specification is applied at the product to deliver to Seiko Epson group (including an overseas subsidiary),and EMS, the outsourcer to utilize in the company. 1.2 Function
USB2.0 interface for WLAN and BT.
Support single-band WLAN 20MHz at 2.4GHz
Support BT4.2+HS , BLE and be backwards compatible with BT1.x,2.x+EDR.
Support BT-WLAN coexistence.
Support Antenna diversity.
GP compliance In accordance with SEIKO EPSON Group's requirements specified by the latest Green Purchasing Standard for Production Materials", all production materials shall conform to SEIKO Epsons policy about chemical substances already banned or to be eliminated and shall be controlled by "4M Variation Management". 1.3 Specification by Model LOT No. U C B S W I Remark 0 0 A A A A PVT PVT EPSON Parts Name EPSON Parts Code Parts Name Connecter Regulatory Foxconn countries J26H006.C01 2187150-00 J26H006.00 J26H006.B01 2187151-00 J26H006.02 1.4 Module Weight None None WTB
(Right Angle) BTB
(Vertical) 4 COMPANY CONFIDENTIAL Model Sample 1 Sample 2 Sample 3 1.5 Product Regulatory Regulatory countries/IDs Module Weight J26H006.C01 J26H006.B01 2.6g 2.6g 2.6g 2.6g 2.6g 2.6g Country Approval Certification Certification No. Remark USA Canada EU Japan
. NO NO NO NO FCC IC CE TELEC TBD TBD TBD TBD 2. Mechanical Specification 2.1 Module Mechanical Drawing
.For J26H006.C01: Typical module dimension (W x L) is 28mmx28mm. 5 COMPANY CONFIDENTIAL Unit: mm The tolerance for each mechanical dimension Note1: The max shift degree of WTB connector is 2.3degree. For J26H006.B01: Typical module dimension (W x L) is 28mmx28mm. 6 COMPANY CONFIDENTIAL The tolerance for each mechanical dimension Unit: mm Note2: The max shift degree of BTB connector is 2.3degree. 2.2 USB Connector
.For J26H006.C01:WTB Connector
4pin, 2.0mm pitch, Right angle type
Part number: HFK2040-G1C3K-8F
Vendor: Foxconn FIT
High temperature plastic PA9T which meet SMT reflow profile(PIP) 7 COMPANY CONFIDENTIAL
. For J26H006.B01: BTB Connector
4pin, 2.0mm pitch, Vertical type
Part number: HFL1040-G1C3K-9F
Vendor: Foxconn FIT
High temperature plastic PA9T which meet SMT reflow profile(PIP) 8 COMPANY CONFIDENTIAL 2.3 RF Switch Connector
Part number: MM8030-2610RJ3
Vendor: Murata 3.USB Connector Pin-out Pin Number 1 2 3 4 Pin Name VDD33 USB_DN USB_DP GND Description DC 3.3V source input USB D- Signal USB D+ Signal Ground I/O I I/O I/O
--
9 COMPANY CONFIDENTIAL 5. Electrical Specification 5.1 Recommended Operating Condition Symbol 3.3v(VDD33) Max Ripple on Supplied Voltage DC current @3.3V at full loading
(WiFi @TX and BT @ TX) USB Suspend current Operating Temperature Storage Temperature Operating Humidity ESD HBM(contact) ESD (indirect) Condition Respect to GND 3.3V @full loading Standard:MIL-STD-883H Standard:EN61000-4-2 Min. 3.0
-
--
0
-25 Typ. 3.3 95 257 3.6
+25 25 30~50%
+/-1.5
+/-4 Max 3.6 330 500 6
+70
+85 90%
Unit V mVpp mA mA RH KV KV Function operation is not guaranteed outside of this limit, and operation outside of this limit for extended period can adversely affect long-term reliability of the device. 5.2 RF Characteristics All typical performance specification are measured at RF connector port operating in +25@3.3V Note3: The target power table is just defined for board level. Note4: Power is compliance with EVM IEEE spec based-on the parameter disable full packet Standard Data Rate Bandwidth Modulation Techniques Operating Frequency Media Access Control WiFi Transmit Output Power Frequency error Receiver Sensitivity Radio Modulation Operating Frequency Channel Numbers BDR Transmitter Output Power BDR Power Control BDR Initial Carrier Freq. Tolerance IEEE802.11b/g/n 802.11b: 11, 5.5, 2, 1 Mbps;
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:
HT20 mode: MCS0~MCS7,up to 72.2Mbp 20MHz for 2.4GHz, 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM,16QAM, QPSK, BPSK 802.11n: 64QAM,16QAM, QPSK, BPSK 2.412GHz~2.462GHz, CSMA/CA with ACK 11b CCK_11Mbps: 23dBm+/-1.5dB 11g 54Mbps: 25dBm+/-1.5dB 11n HT20_MCS7: 25dBm+/-1.5dB
+/-10ppm 11b 11Mbps: -83dBm@PER<=8%
11g 54Mbps: -70dBm@PER<=10%
11n HT20 MCS7: -67dBm@PER<=10%
FHSS 2.402GHz ~ 2.480GHz 79 channels with 1MHz BW 0~+14dBm 2dBPower Control Step8dB 75 kHz 10 COMPANY CONFIDENTIAL Drift Rate/50us <20kHz DH1: +/- 25kHz,DH3: +/- 40kHz,DH5: +/- 40kHz 140kHz f1avg 175kHz f2max 115kHz f2avg/f1avg 0.8
-20dBm@ BER <= 0.1% at 1Mbps
-85dBm @ BER <= 0.1% at 1Mbps P[GFSK]-4dB<P[DPSK]< P[GFSK]+1dB
-75 kHz <i < 75 kHz
-10kHz<0 <10kHz RMS DEVM<=0.13 for all 8DPSK @3Mbps Peak DEVM<=0.25 for all 8DPSK @3Mbps 99% DEVM<=0.2 for 99% 8DPSK @3Mbps BDR Carrier Frequency Drift BDR Modulation Characteristics BDR Maximum Receiver Signal BDR Sensitivity EDR Relative Power EDR Stability and Mod Accuracy BT BDR Frequency Range FL>2.4GHz,FH<2.4835GHz EDR Sensitivity BDR TX Output Spectrum
-20dB Bandwidth LE Output Power LE Modulation Characteristics LE Carrier frequency offset and drift LE Receiver Sensitivity
-80dBm@BER <= 0.01% at 2Mbps
-80dBm@BER <= 0.01% at 3Mbps 1MHz 0~+14dBm 225kHz f1avg 275kHz;
f2max 185kHz for at least 99.9% test packets;
f2avg/f1avg 0.8 Carrier frequency offset: 150kHz Carrier Drift: 50kHz Drift rate: 20kHz/50us
-90dBm@PER <= 30.8%,GFSK,1Mbps 5.3 Current consumption 5.3.1 WiFi current consumption Remark: Base-on Win7 OS to do WiFi only throughput tests. The Standby mode means module connect to AP only, and dont transfer the data. 5.3.2 Bluetooth current consumption Test Condition Idle mode( power on only) BT BDR 1DH5 TX@6dBm BT BDR 1DH5 Rx BT EDR 2DH5 TX@6dBm BT EDR 2DH5 Rx BLE TX@6dBm BLE Rx Standby mode*
Avg. Current at 3.3V Max Min Typ. 63.7 115 87 116 87 78 87 69 Unit mA mA mA mA mA mA mA mA Remark: The result is base-on Win7 driver. The Idle mode means module power on only, dont open any testing tool The standby mode means module connect to BT device only, and dont transfer the data 11 COMPANY CONFIDENTIAL 5.4 eFuse Content 5.4.1 WiFi eFuse Revision Note EEPROM Version address 0xC4 Value 0x01 Chang Lists for WiFi Efuse address 0xC4, change value from 0x00 to 0x01 Owner Fly. Huang Date 2017/08/11 PVT Remark address 0 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 7 6 5 4 3 2 17 17 16 12 12 19 18 A B C D E 8 1 81 00 7C 01 88 07 00 A0 14 13 12 17 eFuse for WiFi F 9 0 04 EC 35 12 C0 A2 D8 29 16 16 16 02 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 14 14 14 13 12 12 17 15 02 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 20 1F 1A 00 00 00 FF FF FF 29 20 50 01 00 00 FF 00 FF 11 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 16 57 F3 09 03 DA 0B 23 D7 E7 46 07 D8 0F 99 52 30 65 32 2E 31 31 6E 20 57 74 65 72 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 6B 41 22 DD 53 59 86 D1 70 10 16 40 00 FC 8C 00 11 9B 00 00 0A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 61 6C 74 65 6B 16 03 4C 41 4E 20 41 64 61 8F 00 00 38 70 eFuse address Path A cck TX calibration power index Path A 11n HT40 mcs7 TX calibration 0x1B Path A power diff index (offset) fixed value Path B cck TX power calibration index Path B 11n HT40 mcs7 TX calibration power index 0x45 Path B power diff index(offset) fixed value 0xB8 channel plan:0x20 fixed value 0xB9 Crystal calibration data 0xBA Thermal meter 0xC3 Antanna setting fixed value 0xC4 EEPROM version: 0x01 fixed value 0x100~0x101 VID:0x0BDA 0x102~0x103 PID:0xD723 fixed value fixed value 0x107~0x10CWiFi MAC: D80F991657F3 consistency FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00~0x0F other config fixed vuale FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xBB~0xBD 0xC1~0xC2 0xC4~0xC6 0xC8~0xCa 0x104~0x12C 0x147 0x188~0x19F Note:
USB Vendor ID (VID): 0x0BDA USB Product ID (PID): 0xD723 12 COMPANY CONFIDENTIAL 5.4.2 BT eFuse 13 COMPANY CONFIDENTIAL Efuse address description Value 0x44~0x49 BT MAC address F8DA0C5D2618 Not fixed value 0xDA~0xDB 0x1F4~0x1F7 default value from IC default value from IC 10,D8 94,80,06,00 Fixed value Fixed value 0x15B~0x15E 0x15B 0x15C 0x15D 0x15E BT TX power calibration index 1M power index 2M power index 3M power index LE power index 0x15F BT Tx gain step 1E 1F 1F 1F 01 Not fixed value Fixed value 0x188~0x189 BT Thermal value index 00,1F Not fixed value 0x1CE~0x1CF BT Antenna info F7,3E Fixed value 0x1E4~0x1E5 BT Modem tx gain compensation33,33 Not fixed value 0x1E6 BT Xtal cap 1E Not fixed value 8 7 6 5 4 3 2 1 9 A B C D E eFuse for BT 0 F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 18 26 5D 0C DA F8 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 10 D8 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 27 1E 1F 1F 1F 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 1F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF F7 3E FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 33 33 1E FF FF FF FF FF FF FF FF FF FF FF FF FF 94 80 06 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF address 0 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 31 35 36 37 38 39 40 41 42 43 44 45 5.5 Power On/Off Sequence 5.5.1 Power On Sequence 14 COMPANY CONFIDENTIAL Ton: The main power ramp up duration Tpor: The power on reset releases and power management unit executes power on tasks Tattach: USB attach state Item Ton Tpor Txtal Tattach T1v25 Min. 0.2
--
--
100
--
Typ. 1.5 2 1.5 250 2 Max 5 10 8
--
5 Uint ms ms ms ms ms 5.5.2 Power Off Sequence Toff: The main power ramp down duration (from 3.3V fall to 0.7V). VDD33(3.3V) is coming from system, different DC power supplys load cap value may cause the different discharge time. Treset: To assert Chip reset, keep the VDD33 under 0.7V for 100ms Item Toff Treset Min.
--
100 Typ. 16
--
Max 1000
--
Unit ms ms 15 COMPANY CONFIDENTIAL 5.6 Floating pin status 5.7 Antenna Specification 16 COMPANY CONFIDENTIAL 17 COMPANY CONFIDENTIAL 5.8 Operating System Support Support the Win7, Win8.1, Win10, Linux operating system on normal driver 18 COMPANY CONFIDENTIAL 6. Label Information 6.1 MAC-ID Label Laser Marking All content is engraved by laser into shielding cover. For J26H006.C01
. For J26H006.B01 19 COMPANY CONFIDENTIAL 6.2 Regulatory Label Regulatory label was printed on PCB Bottom side for PVT, it will be updated after get the official regulatory ID. 6.3 Panel Label 20 COMPANY CONFIDENTIAL 6.4 Carton Label
.For J26H006.C01
. For J26H006.B01 6.5 Pallet Label
.For J26H006.C01 21 COMPANY CONFIDENTIAL
.For J26H006.B01 22 COMPANY CONFIDENTIAL 7. Packing Information I:For J26H006.C01 II:For J26H006.B01 23 COMPANY CONFIDENTIAL The detailed dimension of the tray
The hollow length and side value
The distance between module and module, and between module and outline of tray 24 COMPANY CONFIDENTIAL 7.1 Module Scan Guide 1. Taking the module in declining way about 45 to prevent the shielding reflecting the lightness;
2. Taking the scanner and turning right in 45 angle Note: The distance between scanner and module is about 5-8cm 25 COMPANY CONFIDENTIAL 8. Reliability 8.1 Hardware Reliability Test 26 COMPANY CONFIDENTIAL 8.2 Package Reliability Test (TBD) The product shall pass below package reliability test plan. No Test Items Description Test Criteria Reference Qty'
Result 1 Atmospheric Conditioning Test Temlpearture: 38 Test humidity: 85%R.H. Dwell time: 72hours Units are packaged Compression load=Wt x (S - 1) x F Wt:Total weitht of the packaged-procuct S:Total number of packaged-products in a stack 1:Represents the bottom container in a Stack Compression Test duration:1hour The following breakpoints shall be programmed into the vibration controller to produce the acceleration versus frequency profile (spectrum) below with an overall Grm s level of 1.15. Face 3: 30mins, Face1: 10mins, Face 2 or 4: 10mins, Face 5 or 6: 10mins 2 Static Compression Test 3 Random Vibration Test No obvious visible damage on boxes after temperature and humidity test. No obvious visible damage on boxes after static compression test. ISTA-2A 1carton TBD ISTA-2A 1carton TBD No obvious visible damage on boxes after random vibration test. ISTA-2A 1carton TBD The test drop height varies with the weight of the packaged-product. Find the weight of the packaged-product in the following chart to determine a drop height or an equivalent impact velocity to be used for a substituted drop:
4 Package drop test No obvious visible damage on boxes after packaged drop test. ISTA-2A 1carton TBD 5 Fix displacement Test Displacement:25mm Duration:14200times No obvious visible damage on boxes after fixed displacement test. ISTA-2A 1carton TBD 9. Quality The product quality must be followed-up by Foxconn factory quality control system. In accordance with SEIKO EPSON Group's requirements specified by the latest Electronic Component Quality Requirements Standard" and "WiFi+BT Combo Module Quality Requirements Specification Rev.B" , the product shall be managed Quality control. 9.1 QC Flow Chart 27 COMPANY CONFIDENTIAL 9.2 Visual Inspection Standard 9.3 PVT Mfg. Test Plan Date 2017/08/3 Version V1.7 Author Change Description Fly Huang Initial released 28 COMPANY CONFIDENTIAL 29 COMPANY CONFIDENTIAL 30 COMPANY CONFIDENTIAL 31 COMPANY CONFIDENTIAL 32 COMPANY CONFIDENTIAL 33 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: BKMFBJ26H006. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement:
This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:
(For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC:
1052C-J26H006. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 1052C-J26H006". 1. 2. XXXyyyLPDzzzz-x