Users Manual Model No. : M224A FCC ID : BKMFBM224A SEIKO EPSON CORPORATION EYMF2CAMM-YV Device CN1 Cable Equipment Description:
M224A is the interface board connects Bluetooth module and the Printer. M224A contains CN1, I/O connector for the Printer, and EYMF2CAMM-YV, Bluetooth Module made by Taiyo Yuden Co., Ltd. Model Name: M224A
<CAUTION>
* The following sentence has to be displayed on the outside of the device in which the module is installed: Contains Transmitter Module FCC ID: BKMFBM224A, or Contains FCC ID:
BKMFBM224A
* Please note that this users manual (installation instruction) should no be provided to end-users. M224A How to Built - In:
Device Device EYMF2CAMM-YV Connect MOLEX 20.1MM, UL-R:CN1 M224A EYMF2CAMM-YV M224A
*Please prepare the cable complied with CN1. This document consists of 2 parts.
<Part 1> Pin Description of Connector (CN1) for M224
<Part 2> Users Manual for EYMF2CAMM-YV Pin Description of connector (CN1) for M224A Bluetooth Interface connector signal assignments and functions Pin Signal name Signal direction number 1 VCC 2 VCC 3 MODE_SEL
Input 4 PWROK 5 (Reserved) 6 LINK 7 UIBTYP1 8 UIBTYP2 9 RSTUIB 10 (Reserved) 11 (Reserved) 12 RTS 13 NC 14 DTR 15 RxD 16 TxD 17 RSTOUT 18 GND 19 GND 20 GND Input
Output Output Output Input
Output
Input Input Output Output
Function Power supply(+3.3V) Power supply(+3.3V) This signal sets the operating mode of Bluetooth module L: Automatic mode H: Command mode Reset signal input Not used This signal indicates the state of connection between master device and this unit This signal indicates the type of interface This signal indicates the type of interface Reset signal input Not used Not used This signal indicates whether the Bluetooth interface board is busy Not used This signal indicates whether the Bluetooth interface board can send data to printer Receive data Transmit data Not used(Fixed to H) Ground Ground Ground SEIKO EPSON CORPORATION CONFIDENTIAL
<Part 1><Part 2>
-A New Change Users Manual Module name We hereby the specification. Received by DATE . . DATE Submitted by TAIYO YUDEN Co.,Ltd. APPROVED DES.REVIEW CHECKED DESIGNED Control name Users Manual APPROVED CHECKER DRAWN DESIGNE Control No. Revision history Revision No. Designed New document Newly issued P Q Rectification record Checked Approved TAIYO YUDEN Co.,Ltd. Control No. Control name Users Manual APPROVED CHECKER DRAWN DESIGNE Document constituent list Control name Control No. Document page General items Absolute maximum ratings OutlineAppearance Pin layout Regulatory information TAIYO YUDEN Co.,Ltd. Control No. 16 Control name General items APPROVED CHECKED DRAWN DESIGNED Scope This specification (Specification) applies to the hybrid IC EYMF2CAMM-YV for use Bluetooth module
(Product) manufactured by TAIYO YUDEN Co.,Ltd. (TAIYO YUDEN)
()BluetoothIC EYMF2CAMM-YV
() Description Model name :
Function: Radio frequency transceiver Module (power class2, Bluetooth standard Ver1.1 conformity)
: Class2Bluetooth Ver1.1 Application: PDA, Barcode Reader and Pos
: PDA, Barcode Reader and Pos Structure: Hybrid IC loaded with silicon monolithic semiconductor
Ability of lead free mounting at customer's assembly (Heat resistance of this Product) :Yes Pb Containment of hazardous substance in this Product
* RoHS regulation substance(Pb.Cd.Hg.Cr+6.PBB.PBDE) :Non use
* RoHS Pb.Cd.Hg.Cr+6.PBB.PBDE Outline : 34-pin leadless chip carrier
: 34 Marking : Model name, BD_ADDR, Lot No. and manufacturer on Shielding Case
: , BD_ADDR, No., Notes :
a. Limitation of Warranty i) TAIYO YUDEN provide warranties only if the Product is operated under the condition set forth in this Specification. Please note that TAIYO YUDEN shall not be liable for any defect and/or malfunction arising from use of the Product under the terms and conditions other than the operating conditions hereof. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN Co.,Ltd. Control No. 26 Control name General items APPROVED CHECKED DRAWN DESIGNED ii) This Product is designed for use in products which comply with Bluetooth Specifications (Ver.1.1)
(Bluetooth Specifications). TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth Specifications (the non-complying products). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. BluetoothVer.1.1 BluetoothBluetooth Bluetooth b. Instruction for Use (CAUTION) i) Because Product is not designed for radiation durability, please refrain from exposing Product to radiation in the use. ii) Communication between this Product and other might not be established nor maintained depending upon radio environment or operating condition of this Product and other products with Bluetooth wireless technology. iii) This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 2.4GHz iv) This Product mentioned in this Specification is manufactured for PDA, Barcode Reader and Pos. Before using this product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability suitability, or fitness for particular purpose of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customers sole risk. PDABarcode ReaderPos TAIYO YUDEN Co.,Ltd. Control No. 36 Control name General items APPROVED CHECKED DRAWN DESIGNED c. Term of Support i) Customer are requested to fully check and confirm by the start of mass production of this Product that
(1)no bug, defect or other failure is included in firmware incorporated in this Product (Incorporated Software) ,(2)no bug, defect or other failure arising from installation of this Product in which is contained Incorporated Software into customers products is included in Incorporated Software, and that Incorporated Software fully meets customers intended use, although TAIYO YUDEN sufficiently inspects or verifies quality of Incorporated Software. TAIYO YUDEN warrants that TAIYO YUDEN uses Incorporated Software which customer have inspected or verified and which customer and TAIYO YUDEN have agreed to incorporate in this Product. ii) Please note that TAIYO YUDEN is not responsible for any failure arising out of bugs or defects which you have not found in Incorporated Software prior to reaching an agreement of this Specification between customer and TAIYO YUDEN (including the bugs or defects found after customers acceptance and evaluation), and that TAIYO YUDEN does not render any corrective services, including but not limited to updating or upgrading service for Incorporated Software in case such failures may occur. iii) In the case that customer requests TAIYO YUIDEN to customize the hardware or software of this Product in order to meet such customers specific needs, TAIYO YUDEN will make commercially reasonable effort to modify such hardware or software at customers expense; provide however, the customer is kindly requested to agrees it doesnt mean that TAIYO YUDEN has obligations to do so even in the case it is technically difficult for TAIYO YUDEN. iv) Any failure arising out of this Product will be examined by TAIYO YUDEN regardless of before or after mass production. Customer agrees that once such failure is turned out not to be responsible for TAIYO YUDEN after aforesaid examination, some of the technical support shall be conducted by TAIYO YUDEN at customers expense; provided however, exact cost of this technical support can be agreed through the negotiation by the parties. TAIYO YUDEN Co.,Ltd. Control No. 46 Control name General items APPROVED CHECKED DRAWN DESIGNED d. Caution for Export Control This Product may be subject to governmental approvals, consents, licenses, authorizations, declarations, filings, and registrations for export or re-export of the Product, required by Japanese Foreign Exchange and Foreign Trade Law(including related laws and regulations) and/or any other countrys applicable laws or regulations related to export control. In case you will export or re-export this Product, you are strongly recommended to check and confirm, before exporting or re-exporting, necessary procedures for export or re-export of this Product which is required by applicable laws and regulations, and if necessary, you have to obtain necessary and appropriate approvals or licenses from governmental authority at your own risk and expense. e. Term of Warranty TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. f. Items of the Specification i) Any question arising from the Specification shall be solved in good faith through mutual discussion by the parties hereof. ii) The language of this General items is Japanese and this General items shall be interpreted by Japanese Any copies of translation is a reference purpose only and is not binding on both parties hereto. TAIYO YUDEN Co.,Ltd. Control No. 56 Control name General items APPROVED CHECKED DRAWN DESIGNED Safety Precautions RE:The use of Embedded Software and customer support Before using Bluetooth product. Please kindly read carefully and understand the following before using the Products. 1.Taiyo Yuden Co., Ltd. (hereinafter TY), lawfully has copyrights and other rights to the software embedded to the memory of the Products (the Embedded Software). Except as otherwise expressly provided herein, your company is not permitted to disclose or offer the Embedded Software, either wholly or partly, to any third party (including uploading to your company or third party(ies)s web sites and downloading by third parties from such sites), nor to copy, revise, reverse engineer, upgrade, make specification change, or alienate the Embedded Software.
(Reverse engineering ) 2. Before using the Products, your company need to check and confirm sufficient safety and operation of your companys products which incorporate the Products and interoperability and compatibility with other Bluetooth enabled products. By execution or approval of this Specification, your company shall be deemed to have fully evaluated and confirmed the Products (including the Embedded Software) (the Embedded Software that your company has so fully evaluated and confirmed is hereinafter referred to as Approved Software). 3. Although TY has made full assessment of the Embedded Software, there is still possibility of malfunction of quality or performance due to the bug or other causes existing in or arising out of the Embedded Software, or due to combination with other product including your product. (Potential Failure). Your company shall be deemed to have agreed with the following by the execution or approval of this Specification. Bug 1)The Potential Failure shall not be deemed as defect or failure of the Embedded Software or the Products, under the agreement between TY and your company (executed either in past, or in the future) or under all applicable laws. 2)Your company shall indemnify, hold harmless and defend TY from and against any claims, lawsuits, or damages that arise or result from the Potential Failure. TAIYO YUDEN Co.,Ltd. Control No. 66 Control name General items APPROVED CHECKED DRAWN DESIGNED 4. TY have not evaluated and confirmed the interoperability, compatibility, etc. of the Products (including Embedded Software) with every kind of Bluetooth enabled product. In addition, TY does not guarantee interoperability and compatibility of the Product with certain devices. In order to minimize the damage or harm arising out of the Potential Failure or out of combination with other devices, TY recommend your company set up interface or external pin (for detail, please refer to Specification Pin Layout of this document) for rewriting the Embedded Software.
) 5. Except as mentioned in Paragraph 2 of Support limitation when failure occurs provided below, TY in principal will not accept your company request to update or change the specifications of the Approved Software. In case your company wishes TY to update or change the specifications of Approved Software, or your company do by yourself, please consult TY beforehand. Support limitation when failure occurs. 1.Your company shall take full responsibility at your own expense and cost to resolve whatever kind/form of problem caused by the Potential Failure in the Embedded Software. 2.Please kindly notify TY of any Potential Failure. Upon your companys request, TY is ready to provide the following supports. 1)During one year from the date of the execution or approval of this Specification, TY will provide, free of charge, information or revised/restored Embedded Software then available to TY for resolving problems caused by the Potential Failure. 2)After one year period mentioned above, TY will provide the same supports as mentioned above with chargeto your company. However, in case TY has discontinued manufacturing the Products, TY provides such supports during six (6) months from the discontinuation regardless of whether your company pays relevant costs and expenses. TAIYO YUDEN Co.,Ltd. Control name Absolute maximum ratings APPROVED CHECKD DRAWN DESIGNED Control No. Maximum rating Item Supply voltage Supply voltage Symbol VDD_MEM, VDD_PIO VDD_1.8 Recommendation operating range Item Supply voltage 1 Supply voltage 2 Supply voltage 3 Supply voltage ripple and spike noise Operation temperature range Symbol VDD_MEM VDD_PIO VDD_1.8 VDD_rn Topr Min.
-0.3
-0.3 Min. 3.0 3.0 1.75 0 Rating Typ. Max. 3.6 1.9 Rating Typ. 3.3 Max. 3.6 3.3 1.8 25 3.6 1.9 30 70 Unit V V Unit V V V Remark Remark mVp-p Degree C Humidity=40%RH Note 1 Note 2 Notes:
1. In case a regulator of Ripple extraction coefficient (more than 70dB) is added to outside of the VDD_1.8 terminal. 2. Operation temperature range is set to satisfy products electrical characteristics for a short period of time. Refer reliability condition to check the product life cycle if you use this module for a long period of time in the condition other than the Typ. standard. TAIYO YUDEN Co.,Ltd. Control No. Control name OutlineAppearance APPROVED CHECKED DRAWN DESIGNED Tolerances unless otherwise specification : +/- 0.2mm 0.2mm Unit : mm 1.25 17 34+0.3
-0.3 1.5x16 8.75 1 3
. 0
3
. 0
6
. 5 1 EYMF2CAMM-YV BD_Address Lot.No TAIYO YUDEN Top View 18 34 x a m 5 5 3
. 18 17 34 2-R2.5 Bottom View R 0
. 2 7 5 R 0
. 2 5 2
. 0
2
. 0
8
. 0 1.15+0.05
-0.05 1 TAIYO YUDEN Co.,Ltd. APPROVED CHECKED DRAWN DESIGNED Unit: mm Control name OutlineAppearance Control No. LAND PATTERN EXAMPLE 1.25 5 3 1
. 34 1.5x16 8.75 5 5 8 0 0
. 8
. 0 5 5
. 0 6
. 5 1 4 1 5 3
. 1 1.15 1.15 TAIYO YUDEN Co.,Ltd. Control No. Control name Pin Description for EYMF2CAMM-YV APPROVED CHECKED DRAWN DESIGNED Block Power GPIO GPIO RESET SPI SPI SPI SPI Power UART UART UART UART Power Power Power Power Power USB USB GPIO GPIO GPIO GPIO GPIO GPIO Power GPIO GPIO GPIO GPIO GPIO GPIO Power Pin Descriptions Ground Input/Output Input/Output Not use I/O
Pin Name Note: Unused pins should not be connected. No. 1 2 3 4 5 6 7 8 9 10 GND AIO(0) AIO(1) RESET SPI_MISO SPI _CSB SPI _CLK SPI _MOSI Input Output Input Input Input UART_RTS Output GND
Description Active high RESET. With 51k ohm internal pull-down The pin is used for the firmware update, PS_KEY setting and Test mode. It connects to PC. Ground Request to send.(flow control signal from host) Tri-statable with internal pull-up Clear to send.(flow control signal to host) With weak internal pull-down TX data to host. RX data from host. With weak internal pull-down DC supply 1.8V DC supply 3.3V DC supply 3.3V Ground Ground Input/Output This signal should be connected to ground Input/Output This signal should be connected to ground Input/Output Not use Configure Baud Rate[0]
Configure Baud Rate[1]
Configure Baud Rate[2]
Switch for Master/Slave mode
(For Automatic Mode) Switch for Automatic/Command control mode Ground Light LED[1]
This determines if Messages are generated in Automatic Mode Light LED[0]
Input Output Input Input Input Input
Input Input Input Input Input
Output Input Output UART_CTS UART_TX UART_RX VDD_1.8 VDD_MEM VDD_PIO GND GND USB_DP USB_DN PIO(11) PIO(10) PIO(9) PIO(8) PIO(7) PIO(6) GND PIO(5) PIO(4) PIO(3) PIO(2) PIO(1) PIO(0) GND Input/Output Not use Input/Output Not use Input/Output Not use Ground
Note:
Unused pins should not be connected. 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 TAIYO YUDEN Co.,Ltd CAUTION: The device complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device must not be co-located or operated in conjunction with any other antenna or transmitter. FCC Regulatory Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause undesired operation. Canada Regulatory Information Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Canadian Radio Interference Regulations: This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry Canada. Cet appareil numrique respecte les limites de bruits radio lctiques applicables aux appareils numriques de Classe B prescrites dans la norme sur le matriel brouilleur: "Appareils Numriques", NMB-003 dicte par l'Industrie Canada.